organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

4-Bromo-N-phenyl­benzamidoxime

aDépartement de Chimie, Université de Montréal, CP 6128, Succ. Centre-ville, Montréal, Québec, Canada H3C 3J7
*Correspondence e-mail: j.gomes.ferreira@umontreal.ca

(Received 24 September 2009; accepted 1 October 2009; online 23 October 2009)

The title compound, C13H11BrN2O, a hydroxy­amidine derivative (an amidoxime), was obtained by addition of the corresponding imidoyl chloride to hydroxy­lamine. The benzene and phenyl rings are twisted from the mean plane of the hydroxy­amidine group by 34.4 (1) and 59.2 (1)°, respectively. In the crystal structure, inter­molecular O—H⋯N hydrogen bonds link pairs of mol­ecules, forming centrosymmetric dimers.

Related literature

For the synthesis, properties and applications of N-substituted hydroxy­amidines/amidoximes see: Krajete et al. (2004[Krajete, A., Steiner, G., Kopacka, H., Ongania, K.-H., Wurst, K., Kristen, M. O., Preishuber-Pflugl, P. & Bildstein, B. (2004). Eur. J. Inorg. Chem. pp. 1740-1752.]), Srivastava et al. (1997[Srivastava, R. M., Brinn, I. M., Machuca-Herrera, J. O., Faria, H. B., Carpenter, G. B., Andrade, D., Vankatesh, C. G. & de Morais, L. P. F. (1997). J. Mol. Struct. 406, 159-167.]); Dondoni et al. (1975[Dondoni, A., Lunazzi, L., Giorgianni, P. & Macciantelli, D. (1975). J. Org. Chem. 40, 2979-2981.], 1977[Dondoni, A., Barbaro, G. & Battaglia, A. (1977). J. Org. Chem. 42, 3372-3377.]); Dürüst et al. (2000[Dürüst, N., Akay, M. A., Dürüst, Y. & Kilic, E. (2000). Anal. Sci. 16, 825-827.], 2008[Dürüst, Y., Ackan, M., Martiskainen, O., Siirola, E. & Phlaja, K. (2008). Polyhedron, 27, 999-1007.]); Exner et al. (1974[Exner, O., Jehlicka, V., Dondoni, A. & Boicelli, A. C. (1974). J. Chem. Soc. Perkin Trans. 2, pp. 561-571.]); Briggs et al. (1976[Briggs, L. H., Cambie, R. C., Dean, C. & Rutledge, P. S. (1976). Aust. J. Chem. 29, 357-366.]); Deb et al. (1991[Deb, M. K., Mishra, N., Patel, K. S. & Mishra, R. K. (1991). Analyst, 116, 332-335.]). For a description of the Cambridge Structural Database, see: Allen et al. (1987[Allen, F. H., Kennard, O., Watson, D. G., Brammer, L., Orpen, A. G. & Taylor, R. (1987). J. Chem. Soc. Perkin Trans 2, pp. S1-19.]).

[Scheme 1]

Experimental

Crystal data
  • C13H11BrN2O

  • Mr = 291.15

  • Monoclinic, P 21 /n

  • a = 6.1752 (1) Å

  • b = 15.2628 (3) Å

  • c = 13.1312 (2) Å

  • β = 103.415 (1)°

  • V = 1203.86 (4) Å3

  • Z = 4

  • Cu Kα radiation

  • μ = 4.53 mm−1

  • T = 200 K

  • 0.18 × 0.15 × 0.09 mm

Data collection
  • Bruker APEXII diffractometer

  • Absorption correction: multi-scan (SADABS; Sheldrick, 1996[Sheldrick, G. M. (1996). SADABS. University of Göttingen, Germany.]) Tmin = 0.532, Tmax = 0.665

  • 15615 measured reflections

  • 2356 independent reflections

  • 2273 reflections with I > 2σ(I)

  • Rint = 0.033

Refinement
  • R[F2 > 2σ(F2)] = 0.037

  • wR(F2) = 0.090

  • S = 1.11

  • 2356 reflections

  • 155 parameters

  • H-atom parameters constrained

  • Δρmax = 0.39 e Å−3

  • Δρmin = −0.68 e Å−3

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
O1—H1⋯N1i 0.84 1.99 2.733 (2) 147
Symmetry code: (i) -x+1, -y+1, -z+2.

Data collection: APEX2 (Bruker, 2009[Bruker (2009). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]); cell refinement: SAINT (Bruker, 2009[Bruker (2009). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]); data reduction: SAINT; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); molecular graphics: SHELXTL (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); software used to prepare material for publication: UdMX (Maris, 2004[Maris, T. (2004). UdMX. University of Montréal, Montréal, QC, Canada.]).

Supporting information


Comment top

Although extensively studied for their biological activity (antituberculars, hypotensives), their pharmacological properties (bactericidal, fungicidal, local anaesthetics) (Srivastava, 1997) and also as precursors in the synthesis of cyclic compounds (Dürüst, 2000 and 2008), N-substituted hydroxyamidines/amidoximes have been less investigated concerning their role in coordination and supramolecular chemistry. They act as bidentate ligands to form 5-membered chelate rings with metal ions, forming stable metal complexes. The good electronic delocalization presented by their structures, and the interesting design possibilities, suggest that N-substituted hydroxyamidines/amidoximes and their complexes could be successfully incorporated into supramolecular assemblies based on coordination chemistry and hydrogen bonding. Herein we report the synthesis and crystal structure of a new amidoxime derivative.

The molecular structure of the title compound is shown in Fig. 1. The amidoxime group is present in its neutral form, N—C=N—OH and the bond lengths and angles are within normal ranges (Allen, 1987). The mean planes of the benzene and phenyl rings are tilted with respect to each other by 64.63 (9) ° and, the amidoxime group forms dihedral angles with the benzene and the phenyl rings of 34.4 (1) and 59.2 (1)°, respectively. This value is less than that reported for the bulky substituted N-aryl compound (Krajete, 2004) due to the lesser influence of steric crowding in the title compound.

As illustrated in Fig. 2, the hydrogen bond is of crucial importance to the self-assembly. Molecules are paired by two hydrogen bonds involving the N-hydroxyl group rather than the amidoxime moieties. In the crystal structure, the N-hydroxyl groups participate in hydrogen bonding of the O—H···N type in which two molecules are joined via O—H···N hydrogen bonds to form a dimer across an inversion center (Table 1).

Related literature top

For the synthesis, properties and applications of N-substituted hydroxyamidines/amidoximes see: Krajete et al. (2004), Srivastava et al. (1997); Dondoni et al. (1975, 1977); Dürüst et al. (2000, 2008); Exner et al. (1974); Briggs et al. (1976); Deb et al. (1991). For a description of the Cambridge Structural Database, see: Allen et al. (1987).

Experimental top

The title compound was synthesized according to the procedure of Krajete et al. (2004). 4-Bromo-N-phenylbenzamide (1.5 g, 5.43 mmol) and an excess of thionyl chloride (15 ml) were refluxed for 2 h under nitrogen atmosphere, yielding the corresponding imidoyl chloirde as a pale yellow solid. This compound was dissolved in dry dichlorometane and added drop-wise to a mixture of hydroxylamine hydrochloride (0.4 g, 5.97 mmol) in anhydrous ethanol and triethylamine (3.8 ml, 27.1 mmol) in dry dichloromethane at 195K. The reaction mixture was brought to room temperature and then was heated at reflux for 16 h. The resulting yellow solution was washed with distillated water and the organic materials were subsequently extracted with diethyl ether, dried over anhydrous Na2SO4 and filtered. X-ray quality crystals were obtained from a solution of the title compound in aqueous EtOH by slow evaporation at room temperature.

1H NMR (DMSO-d6, 300 MHz, δ, p.p.m.): 10.66 (s, 1H), 8.34 (s, 1H), 7.52(d, J = 8.4 Hz, 2H), 7.30, (d, J= 8.4 Hz, 2H), 7.08 (t, J = 7.8, 7.8 Hz, 2H), 6.80 (t, J =7.3, 7.3 Hz, 1H), 6.65 (d, J = 7.8 Hz, 2H).

Refinement top

The H atoms were generated geometrically (C—H 0.95, N—H 0.88, O—H 0.84 Å) and were included in the refinement in the riding model approximation; their temperature factors were set to 1.5 and 1.2 times for oxygen atom and for those of the equivalent isotropic temperature factors of the parent site, respectively.

Structure description top

Although extensively studied for their biological activity (antituberculars, hypotensives), their pharmacological properties (bactericidal, fungicidal, local anaesthetics) (Srivastava, 1997) and also as precursors in the synthesis of cyclic compounds (Dürüst, 2000 and 2008), N-substituted hydroxyamidines/amidoximes have been less investigated concerning their role in coordination and supramolecular chemistry. They act as bidentate ligands to form 5-membered chelate rings with metal ions, forming stable metal complexes. The good electronic delocalization presented by their structures, and the interesting design possibilities, suggest that N-substituted hydroxyamidines/amidoximes and their complexes could be successfully incorporated into supramolecular assemblies based on coordination chemistry and hydrogen bonding. Herein we report the synthesis and crystal structure of a new amidoxime derivative.

The molecular structure of the title compound is shown in Fig. 1. The amidoxime group is present in its neutral form, N—C=N—OH and the bond lengths and angles are within normal ranges (Allen, 1987). The mean planes of the benzene and phenyl rings are tilted with respect to each other by 64.63 (9) ° and, the amidoxime group forms dihedral angles with the benzene and the phenyl rings of 34.4 (1) and 59.2 (1)°, respectively. This value is less than that reported for the bulky substituted N-aryl compound (Krajete, 2004) due to the lesser influence of steric crowding in the title compound.

As illustrated in Fig. 2, the hydrogen bond is of crucial importance to the self-assembly. Molecules are paired by two hydrogen bonds involving the N-hydroxyl group rather than the amidoxime moieties. In the crystal structure, the N-hydroxyl groups participate in hydrogen bonding of the O—H···N type in which two molecules are joined via O—H···N hydrogen bonds to form a dimer across an inversion center (Table 1).

For the synthesis, properties and applications of N-substituted hydroxyamidines/amidoximes see: Krajete et al. (2004), Srivastava et al. (1997); Dondoni et al. (1975, 1977); Dürüst et al. (2000, 2008); Exner et al. (1974); Briggs et al. (1976); Deb et al. (1991). For a description of the Cambridge Structural Database, see: Allen et al. (1987).

Computing details top

Data collection: APEX2 (Bruker, 2009); cell refinement: SAINT (Bruker, 2009); data reduction: SAINT (Bruker, 2009); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: SHELXTL (Sheldrick, 2008); software used to prepare material for publication: UdMX (Maris, 2004).

Figures top
[Figure 1] Fig. 1. The molecular structure of the title compound (50% probability displacement ellipsoids).
[Figure 2] Fig. 2. A pair of molecules linked through intermolecular N—H···O bonds [Symmetry code: (i)1 - x,1 - y, 2 - z]. Hydrogen bonds are shown as dashed lines.
4-Bromo-N-phenylbenzamidoxime top
Crystal data top
C13H11BrN2OF(000) = 584
Mr = 291.15Dx = 1.606 Mg m3
Monoclinic, P21/nCu Kα radiation, λ = 1.54178 Å
Hall symbol: -P 2ynCell parameters from 11676 reflections
a = 6.1752 (1) Åθ = 2.9–71.9°
b = 15.2628 (3) ŵ = 4.53 mm1
c = 13.1312 (2) ÅT = 200 K
β = 103.415 (1)°Block, yellow
V = 1203.86 (4) Å30.18 × 0.15 × 0.09 mm
Z = 4
Data collection top
Bruker APEXII
diffractometer
2356 independent reflections
Radiation source: Rotating Anode2273 reflections with I > 2σ(I)
Montel 200 optics monochromatorRint = 0.033
Detector resolution: 5.5 pixels mm-1θmax = 72.5°, θmin = 4.5°
ω scansh = 77
Absorption correction: multi-scan
(SADABS; Sheldrick, 1996)
k = 1818
Tmin = 0.532, Tmax = 0.665l = 1516
15615 measured reflections
Refinement top
Refinement on F2Secondary atom site location: difference Fourier map
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.037H-atom parameters constrained
wR(F2) = 0.090 w = 1/[σ2(Fo2) + (0.0601P)2 + 0.3484P]
where P = (Fo2 + 2Fc2)/3
S = 1.11(Δ/σ)max = 0.001
2356 reflectionsΔρmax = 0.39 e Å3
155 parametersΔρmin = 0.68 e Å3
0 restraintsExtinction correction: SHELXL97 (Sheldrick, 2008), Fc*=kFc[1+0.001xFc2λ3/sin(2θ)]-1/4
Primary atom site location: structure-invariant direct methodsExtinction coefficient: 0.0212 (8)
Crystal data top
C13H11BrN2OV = 1203.86 (4) Å3
Mr = 291.15Z = 4
Monoclinic, P21/nCu Kα radiation
a = 6.1752 (1) ŵ = 4.53 mm1
b = 15.2628 (3) ÅT = 200 K
c = 13.1312 (2) Å0.18 × 0.15 × 0.09 mm
β = 103.415 (1)°
Data collection top
Bruker APEXII
diffractometer
2356 independent reflections
Absorption correction: multi-scan
(SADABS; Sheldrick, 1996)
2273 reflections with I > 2σ(I)
Tmin = 0.532, Tmax = 0.665Rint = 0.033
15615 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0370 restraints
wR(F2) = 0.090H-atom parameters constrained
S = 1.11Δρmax = 0.39 e Å3
2356 reflectionsΔρmin = 0.68 e Å3
155 parameters
Special details top

Experimental. X-ray crystallographic data for (I) were collected from a single-crystal sample, which was mounted on a loop fiber. Data were collected using a Bruker Platform diffractometer, equipped with a Bruker SMART 4 K Charged-Coupled Device (CCD) Area Detector using the program APEX2 and a Nonius FR591 rotating anode equiped with a Montel 200 optics The crystal-to-detector distance was 5.0 cm, and the data collection was carried out in 512 x 512 pixel mode. The initial unit-cell parameters were determined by a least-squares fit of the angular setting of strong reflections, collected by a 10.0 degree scan in 33 frames over four different parts of the reciprocal space (133 frames total). One complete sphere of data was collected, to better than 0.80Å resolution.

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Br1.22913 (4)0.643427 (14)0.618702 (18)0.04819 (16)
O10.4208 (2)0.40817 (9)0.94989 (11)0.0393 (3)
H10.37520.43750.99490.059*
N10.5789 (3)0.45874 (10)0.91086 (12)0.0340 (3)
N20.4624 (3)0.36287 (11)0.77216 (14)0.0410 (4)
H20.34310.35170.79580.049*
C10.5957 (3)0.42884 (11)0.82101 (14)0.0313 (4)
C20.7549 (3)0.47517 (11)0.77017 (13)0.0299 (4)
C30.9510 (3)0.50983 (12)0.83173 (14)0.0346 (4)
H30.98730.49940.90510.041*
C41.0932 (3)0.55912 (13)0.78747 (15)0.0368 (4)
H41.22610.58280.82990.044*
C51.0391 (3)0.57343 (12)0.68075 (15)0.0353 (4)
C60.8484 (4)0.53857 (14)0.61731 (15)0.0408 (4)
H60.81530.54790.54380.049*
C70.7060 (3)0.48970 (13)0.66248 (15)0.0381 (4)
H70.57380.46590.61960.046*
C80.4934 (3)0.31015 (12)0.68770 (14)0.0337 (4)
C90.3113 (3)0.29434 (13)0.60544 (16)0.0386 (4)
H90.17030.31890.60620.046*
C100.3362 (4)0.24228 (13)0.52181 (16)0.0417 (4)
H100.21170.23090.46560.050*
C110.5407 (4)0.20724 (13)0.52029 (16)0.0414 (4)
H110.55770.17260.46260.050*
C120.7220 (3)0.22247 (14)0.60292 (17)0.0418 (5)
H120.86290.19800.60170.050*
C130.6989 (3)0.27319 (13)0.68740 (15)0.0384 (4)
H130.82260.28260.74460.046*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Br0.0483 (2)0.0459 (2)0.0568 (2)0.00414 (8)0.02515 (13)0.00910 (8)
O10.0486 (8)0.0365 (7)0.0400 (7)0.0037 (6)0.0248 (6)0.0008 (5)
N10.0401 (8)0.0326 (8)0.0336 (7)0.0003 (6)0.0173 (6)0.0020 (6)
N20.0419 (9)0.0438 (9)0.0439 (10)0.0102 (7)0.0235 (8)0.0114 (7)
C10.0353 (8)0.0289 (8)0.0315 (8)0.0025 (7)0.0113 (7)0.0001 (6)
C20.0346 (8)0.0272 (8)0.0300 (8)0.0029 (6)0.0118 (7)0.0004 (6)
C30.0399 (9)0.0362 (9)0.0280 (8)0.0020 (7)0.0088 (7)0.0005 (7)
C40.0353 (9)0.0370 (9)0.0380 (9)0.0008 (7)0.0086 (7)0.0007 (7)
C50.0383 (9)0.0304 (8)0.0409 (10)0.0017 (7)0.0170 (7)0.0038 (7)
C60.0492 (11)0.0437 (10)0.0298 (9)0.0029 (9)0.0101 (8)0.0063 (8)
C70.0422 (10)0.0403 (10)0.0306 (9)0.0052 (8)0.0061 (7)0.0018 (7)
C80.0394 (9)0.0307 (8)0.0344 (9)0.0060 (7)0.0156 (7)0.0028 (7)
C90.0377 (9)0.0352 (9)0.0439 (10)0.0029 (7)0.0113 (8)0.0017 (8)
C100.0479 (11)0.0383 (10)0.0373 (10)0.0075 (8)0.0065 (8)0.0035 (8)
C110.0565 (12)0.0332 (9)0.0389 (10)0.0079 (8)0.0199 (9)0.0072 (7)
C120.0410 (10)0.0356 (10)0.0534 (11)0.0016 (7)0.0203 (9)0.0058 (8)
C130.0374 (9)0.0372 (9)0.0409 (10)0.0031 (7)0.0099 (8)0.0046 (8)
Geometric parameters (Å, º) top
Br—C51.9040 (18)C6—C71.387 (3)
O1—N11.430 (2)C6—H60.9500
O1—H10.8400C7—H70.9500
N1—C11.292 (2)C8—C91.388 (3)
N2—C11.363 (2)C8—C131.390 (3)
N2—C81.419 (2)C9—C101.393 (3)
N2—H20.8800C9—H90.9500
C1—C21.489 (2)C10—C111.376 (3)
C2—C71.394 (2)C10—H100.9500
C2—C31.394 (3)C11—C121.386 (3)
C3—C41.383 (3)C11—H110.9500
C3—H30.9500C12—C131.387 (3)
C4—C51.381 (3)C12—H120.9500
C4—H40.9500C13—H130.9500
C5—C61.382 (3)
N1—O1—H1109.5C7—C6—H6120.5
C1—N1—O1110.06 (15)C6—C7—C2120.66 (17)
C1—N2—C8127.65 (17)C6—C7—H7119.7
C1—N2—H2116.2C2—C7—H7119.7
C8—N2—H2116.2C9—C8—C13120.19 (17)
N1—C1—N2121.56 (17)C9—C8—N2118.38 (18)
N1—C1—C2116.31 (16)C13—C8—N2121.42 (17)
N2—C1—C2121.95 (16)C8—C9—C10119.66 (19)
C7—C2—C3118.85 (16)C8—C9—H9120.2
C7—C2—C1121.35 (16)C10—C9—H9120.2
C3—C2—C1119.67 (15)C11—C10—C9120.21 (19)
C4—C3—C2120.89 (17)C11—C10—H10119.9
C4—C3—H3119.6C9—C10—H10119.9
C2—C3—H3119.6C10—C11—C12120.06 (18)
C5—C4—C3119.02 (17)C10—C11—H11120.0
C5—C4—H4120.5C12—C11—H11120.0
C3—C4—H4120.5C11—C12—C13120.36 (19)
C4—C5—C6121.51 (17)C11—C12—H12119.8
C4—C5—Br119.69 (15)C13—C12—H12119.8
C6—C5—Br118.80 (14)C12—C13—C8119.50 (18)
C5—C6—C7119.05 (17)C12—C13—H13120.3
C5—C6—H6120.5C8—C13—H13120.3
O1—N1—C1—N24.8 (2)Br—C5—C6—C7178.10 (16)
O1—N1—C1—C2179.94 (14)C5—C6—C7—C20.5 (3)
C8—N2—C1—N1164.13 (19)C3—C2—C7—C60.7 (3)
C8—N2—C1—C221.0 (3)C1—C2—C7—C6175.18 (18)
N1—C1—C2—C7141.09 (18)C1—N2—C8—C9135.4 (2)
N2—C1—C2—C734.0 (3)C1—N2—C8—C1346.0 (3)
N1—C1—C2—C334.7 (2)C13—C8—C9—C100.9 (3)
N2—C1—C2—C3150.13 (18)N2—C8—C9—C10179.53 (17)
C7—C2—C3—C41.1 (3)C8—C9—C10—C110.5 (3)
C1—C2—C3—C4174.82 (16)C9—C10—C11—C121.1 (3)
C2—C3—C4—C50.3 (3)C10—C11—C12—C130.2 (3)
C3—C4—C5—C61.0 (3)C11—C12—C13—C81.3 (3)
C3—C4—C5—Br178.52 (14)C9—C8—C13—C121.8 (3)
C4—C5—C6—C71.4 (3)N2—C8—C13—C12179.64 (18)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O1—H1···N1i0.841.992.733 (2)147
Symmetry code: (i) x+1, y+1, z+2.

Experimental details

Crystal data
Chemical formulaC13H11BrN2O
Mr291.15
Crystal system, space groupMonoclinic, P21/n
Temperature (K)200
a, b, c (Å)6.1752 (1), 15.2628 (3), 13.1312 (2)
β (°) 103.415 (1)
V3)1203.86 (4)
Z4
Radiation typeCu Kα
µ (mm1)4.53
Crystal size (mm)0.18 × 0.15 × 0.09
Data collection
DiffractometerBruker APEXII
Absorption correctionMulti-scan
(SADABS; Sheldrick, 1996)
Tmin, Tmax0.532, 0.665
No. of measured, independent and
observed [I > 2σ(I)] reflections
15615, 2356, 2273
Rint0.033
(sin θ/λ)max1)0.619
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.037, 0.090, 1.11
No. of reflections2356
No. of parameters155
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)0.39, 0.68

Computer programs: APEX2 (Bruker, 2009), SAINT (Bruker, 2009), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008), SHELXTL (Sheldrick, 2008), UdMX (Maris, 2004).

Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O1—H1···N1i0.841.992.733 (2)147.0
Symmetry code: (i) x+1, y+1, z+2.
 

Acknowledgements

The authors are grateful to the Natural Sciences and Engineering Research Council of Canada and the University of Montreal for financial assistance and to the Canadian Post-Doctoral Research Fellowship Program (PDRF).

References

First citationAllen, F. H., Kennard, O., Watson, D. G., Brammer, L., Orpen, A. G. & Taylor, R. (1987). J. Chem. Soc. Perkin Trans 2, pp. S1–19.  CrossRef Web of Science Google Scholar
First citationBriggs, L. H., Cambie, R. C., Dean, C. & Rutledge, P. S. (1976). Aust. J. Chem. 29, 357–366.  CrossRef CAS Google Scholar
First citationBruker (2009). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationDeb, M. K., Mishra, N., Patel, K. S. & Mishra, R. K. (1991). Analyst, 116, 332–335.  CrossRef Web of Science Google Scholar
First citationDondoni, A., Barbaro, G. & Battaglia, A. (1977). J. Org. Chem. 42, 3372–3377.  CrossRef CAS Web of Science Google Scholar
First citationDondoni, A., Lunazzi, L., Giorgianni, P. & Macciantelli, D. (1975). J. Org. Chem. 40, 2979–2981.  CrossRef CAS Web of Science Google Scholar
First citationDürüst, Y., Ackan, M., Martiskainen, O., Siirola, E. & Phlaja, K. (2008). Polyhedron, 27, 999–1007.  Google Scholar
First citationDürüst, N., Akay, M. A., Dürüst, Y. & Kilic, E. (2000). Anal. Sci. 16, 825–827.  Google Scholar
First citationExner, O., Jehlicka, V., Dondoni, A. & Boicelli, A. C. (1974). J. Chem. Soc. Perkin Trans. 2, pp. 561–571.  Google Scholar
First citationKrajete, A., Steiner, G., Kopacka, H., Ongania, K.-H., Wurst, K., Kristen, M. O., Preishuber-Pflugl, P. & Bildstein, B. (2004). Eur. J. Inorg. Chem. pp. 1740–1752.  Web of Science CSD CrossRef Google Scholar
First citationMaris, T. (2004). UdMX. University of Montréal, Montréal, QC, Canada.  Google Scholar
First citationSheldrick, G. M. (1996). SADABS. University of Göttingen, Germany.  Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSrivastava, R. M., Brinn, I. M., Machuca-Herrera, J. O., Faria, H. B., Carpenter, G. B., Andrade, D., Vankatesh, C. G. & de Morais, L. P. F. (1997). J. Mol. Struct. 406, 159–167.  CSD CrossRef CAS Web of Science Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds