metal-organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

Tribenzoatobismuth(III): a new ­polymorph

aREC–008, Novosibirsk State University, Pirogova 2, Novosibirsk 630090, Russian Federation, and bInstitute of Solid State Chemistry and Mechanochemistry SB RAS, Kutateladze 18, Novosibirsk 630128, Russian Federation
*Correspondence e-mail: n.tumanov@gmail.com

(Received 26 July 2010; accepted 3 September 2010; online 11 September 2010)

A new polymorph (β) was obtained for an active pharmaceutical ingredient, bis­muth tribenzoate, [Bi(C6H5CO2)3]. The new β-polymorph is 1.05 times denser than the previously known polymorph [Rae et al. (1998[Rae, A. D., Gainsford, G. J. & Kemmitt, T. (1998). Acta Cryst. B54, 438-442.]). Acta Cryst. B54, 438–442]. In the β-polymorph, the Bi atom is linked with three benzoate anions, each of them acting as a bidentate ligand, and these assemblies with C3 point symmetry can be considered as `mol­ecules'. The structure of the β-polymorph has no polymeric chains, in contrast to the previously known polymorph. The `mol­ecules' in the β-polymorph are stacked along [001], so that the phenyl rings of the neighbouring mol­ecules are parallel to each other. Based on the pronounced difference in the crystal structures, one can suppose that two polymorphs should differ in the dissolution kinetics and bioavailability.

Related literature

The synthesis of the complex is described by Timakova et al. (2010[Timakova, E. V., Udalova, T. A. & Yuhin, Yu. M. (2010). Chem. Sustainable Dev. 18, 79-86.]). For background to bismuth complexes, see: Mehring (2007[Mehring, M. (2007). Coord. Chem. Rev. 251, 974-1006.]); Kislichenko (1999[Kislichenko, V. S. (1999). Provizor, 12, 38-40.]); Goddard et al. (2003[Goddard, P. J., Klinger, J. D., Dhal, P. K., Mandeville, H. W. III, Fitzpatrick, R. J. & Neenan, X. T. (2003). US Patent 6565895.]); Alcock (1972[Alcock, N. W. (1972). Advances in Inorganic Chemistry and Radiochemistry, edited by H. J. Emeleus & A. G. Sharpe, pp. 1-58. New York: Academic Press.]). For the previously known polymorph, see: Rae et al. (1998[Rae, A. D., Gainsford, G. J. & Kemmitt, T. (1998). Acta Cryst. B54, 438-442.]). For related structures, see: Hanawalt et al. (1938[Hanawalt, J. D., Rihh, H. W. & Frevel, L. K. (1938). Ind. Eng. Chem. 10, 457-512.]); Rosmann et al. (1995[Rosmann, D., Hiibler, K. & Schmidt, A. (1995). Monatsh. Chem. 126, 1045-1050.]).

[Scheme 1]

Experimental

Crystal data
  • [Bi(C7H5O2)3]

  • Mr = 572.31

  • Trigonal, R 3

  • a = 19.5608 (19) Å

  • c = 4.0967 (5) Å

  • V = 1357.5 (2) Å3

  • Z = 3

  • Mo Kα radiation

  • μ = 9.77 mm−1

  • T = 295 K

  • 0.07 × 0.01 × 0.01 mm

Data collection
  • Oxford Diffraction Gemini R Ultra diffractometer

  • Absorption correction: multi-scan (CrysAlis PRO; Oxford Diffraction, 2010[Oxford Diffraction (2010). CrysAlis PRO. Oxford Diffraction Ltd, Yarnton, England.]) Tmin = 0.954, Tmax = 1.000

  • 3909 measured reflections

  • 1355 independent reflections

  • 1076 reflections with I > 2σ(I)

  • Rint = 0.087

Refinement
  • R[F2 > 2σ(F2)] = 0.042

  • wR(F2) = 0.049

  • S = 0.76

  • 1355 reflections

  • 84 parameters

  • H-atom parameters constrained

  • Δρmax = 1.52 e Å−3

  • Δρmin = −0.68 e Å−3

  • Absolute structure: Flack (1983[Flack, H. D. (1983). Acta Cryst. A39, 876-881.]), 622 Friedel pairs

  • Flack parameter: −0.034 (12)

Data collection: CrysAlis PRO (Oxford Diffraction, 2010[Oxford Diffraction (2010). CrysAlis PRO. Oxford Diffraction Ltd, Yarnton, England.]); cell refinement: CrysAlis PRO; data reduction: CrysAlis PRO; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); molecular graphics: Mercury (Macrae et al., 2006[Macrae, C. F., Edgington, P. R., McCabe, P., Pidcock, E., Shields, G. P., Taylor, R., Towler, M. & van de Streek, J. (2006). J. Appl. Cryst. 39, 453-457.]); software used to prepare material for publication: publCIF (Westrip, 2010[Westrip, S. P. (2010). J. Appl. Cryst. 43, 920-925.]) and enCIFer (Allen et al., 2004[Allen, F. H., Johnson, O., Shields, G. P., Smith, B. R. & Towler, M. (2004). J. Appl. Cryst. 37, 335-338.]).

Supporting information


Comment top

Bismuth tribenzoate, as other bismuth salts, is an active pharmaceutical ingredient, which has anti–infective and analgesic effects on lymphatic tissue and mucous tunic (Kislichenko, 1999), (Goddard et al., 2003). Besides, it can be used as precursor for fine–dispersed powders of the metallic bismuth and its oxides (Mehring, 2007).

While developing a new method of synthesis of the title salt (Timakova et al., 2010), we have discovered, that the powder diffraction pattern of the compound obtained in our experiments I did not match the one calculated based on the single–crystal diffraction data for the known monoclinic polymorph of bismuth tribenzoate, which was prepared by anionic exchange of bismuth triacetate with benzoic acid (Rae et al., 1998). At the same time, the powder diffraction pattern of I agreed well with the powder diffraction pattern reported in a much earlier publication (Hanawalt et al., 1938). We have managed to select a small crystal from the batch of the synthesized compound I of quality suitable for a single–crystal diffraction study. The powder diffraction pattern calculated based on the results of the structure solution using this single–crystal agreed well with the diffraction pattern of the whole polycrystalline batch, thus proving, that the crystal was representative for the whole sample. We report herein the crystal structure of the β-polymorph of bismuth tribenzoate.

The new β-polymorph I is 1.05 times denser than the previously known polymorph II with the space group P21/m (Rae et al., 1998): the density of I at room temperature is 2.098 g/cm3, and that of II at 173 K is 1.99 g/cm3. The structure of I is isomorphous to the structure of antimony tribenzoate (Rosmann et al., 1995). In I each bismuth atom is linked to three benzoate anions, which act as bidentate ligands (Bi1—O1 distance is 2.254 (5)Å) and Bi1—O2 distance is 2.513 (5)Å). These assemblies with C3 point symmetry can be considered as `molecules' (Fig. 1). The `molecules' in I are stacked along [0 0 1], so that the phenyl rings of the neighbouring `molecules' are parallel to each other (Fig. 2). The carboxylate group in a ligand is rotated at 13.3 (3)° relative to phenyl ring. The neighbouring `molecules' can be supposed to interact noticeably with each other, as far as one can judge from the intermolecular Bi1···O1i [symmetry code: (i) x, y, z-1] distances (3.110 (6)Å), which are shorter, than the sum of van der Waals radii of Bi and O (3.67Å; Alcock, 1972). Still, the structure of I has no polymeric chains, in contrast to the II. Phenyl ring of each benzoic anion is placed between two benzoic cations of neighbouring `molecules' (Fig. 3). In the structure of II each bismuth atom is also linked to three benzoate ligands, however, O atoms act as bridges between the neighbouring Bi atoms, thus forming infinite polymeric chains along a axis. No individual molecules can be selected in II. Based on the pronounced difference in the crystal structures, one can suppose that two polymorphs should differ in the dissolution kinetics and bioavailability.

Related literature top

The synthesis of the complex is described by Timakova et al. (2010). For background to busmuth complexes, see: Mehring (2007); Kislichenko (1999); Goddard et al. (2003); Alcock, (1972). For the previously known polymorph, see: Rae et al. (1998). For related structures, see: Hanawalt et al. (1938); Rosmann et al. (1995).

Experimental top

The title salt was precipitated from bismuth perchloric acid solution (prepared from 217 ml of distilled water, 483 ml of concentrated perchloric acid and 850 g of bismuth oxide, then diluted to 1:10 with water) by benzoic acid with the mole ratio of benzoate–ions to bismuth being equal to 3. The reaction was carried out at 343 K during 1 h. The obtained white powder of bismuth tribenzoate was filtered and washed once with water and dried at room temperature.

Analysis found: Bi 36.6 (7), C 43.9 (4), H 2.65 (4); calculated Bi 36.5, C 44.07, H 2.64.

The typical particle size in the powder sample was in the range 0.002–0.01 mm, but a few larger crystals could be found. The largest of the selected crystals (0.07× 0.01×0.01 mm) was fixed at a Mitigen MicroMesh holder with cryoil and used for a single–crystal X–ray diffraction study. Powder X–ray diffraction (Stoe Stadi MP, Cu Kα1, curved germanium monochromator (111), linear PSD) has proved that the selected crystal was representative for the whole powder sample batch.

Refinement top

After the positions of Bi atoms were determined by direct methods, carbon and oxygen atoms could be located from difference Fourier maps one after another in several cycles of refinement. Hydrogen atoms of the aromatic ring were placed geometrically with C—H distance 0.93Å with Uiso(H) = 1.2Ueq(C). The highest peak at the electron density map is located at 1.23Å distance from Bi1 atom and could be a consequence of the Fourier sum truncation.

Computing details top

Data collection: CrysAlis PRO, (Oxford Diffraction, 2010); cell refinement: CrysAlis PRO, (Oxford Diffraction, 2010); data reduction: CrysAlis PRO, (Oxford Diffraction, 2010); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: Mercury (Macrae et al., 2006); software used to prepare material for publication: publCIF (Westrip, 2010) and enCIFer (Allen et al., 2004).

Figures top
[Figure 1] Fig. 1. An ellipsoid plot of the title compound, showing the atom–numbering scheme and 50% probability displacement ellipsoids. Hydrogen atoms were shown as s small spheres of arbitrary radii and were not labeled for clarity. Symmetry codes: (i) -1-x+y, 1-x, z; (ii) 1-y, 2+x-y, z.
[Figure 2] Fig. 2. The stacking of bismuth tribenzoate `molecules' along [001] in the title compound. Intermolecular Bi1···O1 contacts shown as blue dashed lines. Hydrogen atoms were omitted for clarity.
[Figure 3] Fig. 3. The crystal packing of the title compound viewed along the c axis. Hydrogen atoms were omitted for clarity.
Tribenzoatobismuth(III) top
Crystal data top
[Bi(C7H5O2)3]Dx = 2.098 Mg m3
Mr = 572.31Mo Kα radiation, λ = 0.71073 Å
Trigonal, R3Cell parameters from 964 reflections
Hall symbol: R 3θ = 3.6–28.0°
a = 19.5608 (19) ŵ = 9.77 mm1
c = 4.0967 (5) ÅT = 295 K
V = 1357.5 (2) Å3Needle, colourless
Z = 30.07 × 0.01 × 0.01 mm
F(000) = 816
Data collection top
Oxford Diffraction Gemini R Ultra
diffractometer
1355 independent reflections
Radiation source: fine–focus sealed tube1076 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.087
Detector resolution: 10.3457 pixels mm-1θmax = 28.0°, θmin = 3.6°
ω scansh = 2520
Absorption correction: multi-scan
(CrysAlis PRO; Oxford Diffraction, 2010)
k = 1625
Tmin = 0.954, Tmax = 1.000l = 55
3909 measured reflections
Refinement top
Refinement on F2Secondary atom site location: difference Fourier map
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.042H-atom parameters constrained
wR(F2) = 0.049 w = 1/[σ2(Fo2) + (0.P)2]
where P = (Fo2 + 2Fc2)/3
S = 0.76(Δ/σ)max < 0.001
1355 reflectionsΔρmax = 1.52 e Å3
84 parametersΔρmin = 0.68 e Å3
0 restraintsAbsolute structure: Flack (1983), 622 Friedel pairs
Primary atom site location: structure-invariant direct methodsAbsolute structure parameter: 0.034 (12)
Crystal data top
[Bi(C7H5O2)3]Z = 3
Mr = 572.31Mo Kα radiation
Trigonal, R3µ = 9.77 mm1
a = 19.5608 (19) ÅT = 295 K
c = 4.0967 (5) Å0.07 × 0.01 × 0.01 mm
V = 1357.5 (2) Å3
Data collection top
Oxford Diffraction Gemini R Ultra
diffractometer
1355 independent reflections
Absorption correction: multi-scan
(CrysAlis PRO; Oxford Diffraction, 2010)
1076 reflections with I > 2σ(I)
Tmin = 0.954, Tmax = 1.000Rint = 0.087
3909 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.042H-atom parameters constrained
wR(F2) = 0.049Δρmax = 1.52 e Å3
S = 0.76Δρmin = 0.68 e Å3
1355 reflectionsAbsolute structure: Flack (1983), 622 Friedel pairs
84 parametersAbsolute structure parameter: 0.034 (12)
0 restraints
Special details top

Geometry. All s.u.'s (except the s.u. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell s.u.'s are taken into account individually in the estimation of s.u.'s in distances, angles and torsion angles; correlations between s.u.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell s.u.'s is used for estimating s.u.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R–factor wR and goodness of fit S are based on F2, conventional R–factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R–factors(gt) etc. and is not relevant to the choice of reflections for refinement. R–factors based on F2 are statistically about twice as large as those based on F, and R–factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Bi10.00001.00000.00000.02741 (15)
O10.0761 (3)0.9819 (3)0.3632 (14)0.0364 (15)
O20.0144 (3)0.8798 (3)0.0486 (14)0.0401 (15)
C10.0647 (5)0.9145 (5)0.271 (2)0.0275 (19)
C20.1132 (4)0.8836 (4)0.4092 (19)0.0264 (19)
C70.1798 (5)0.9308 (5)0.585 (2)0.036 (2)
H70.19520.98350.62220.043*
C60.2236 (5)0.8990 (5)0.7059 (19)0.038 (2)
H60.26820.93070.83070.045*
C30.0925 (5)0.8056 (5)0.3449 (19)0.041 (2)
H30.04830.77390.21840.049*
C40.1376 (6)0.7756 (5)0.469 (2)0.048 (3)
H40.12330.72320.43090.058*
C50.2038 (6)0.8234 (6)0.649 (2)0.043 (2)
H50.23490.80380.73110.052*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Bi10.02780 (19)0.02780 (19)0.0267 (3)0.01390 (9)0.0000.000
O10.035 (4)0.030 (4)0.043 (4)0.015 (3)0.005 (3)0.001 (3)
O20.034 (4)0.045 (4)0.042 (4)0.020 (3)0.000 (3)0.013 (3)
C10.027 (5)0.028 (5)0.030 (5)0.016 (4)0.006 (4)0.007 (4)
C20.023 (5)0.026 (5)0.029 (5)0.011 (4)0.003 (4)0.001 (4)
C70.040 (6)0.036 (5)0.040 (6)0.025 (5)0.002 (4)0.000 (4)
C60.035 (5)0.040 (6)0.040 (6)0.020 (5)0.002 (4)0.001 (5)
C30.055 (6)0.046 (6)0.035 (6)0.035 (5)0.002 (5)0.005 (5)
C40.066 (7)0.035 (6)0.056 (7)0.035 (6)0.009 (5)0.014 (5)
C50.050 (6)0.061 (7)0.040 (6)0.043 (6)0.008 (5)0.019 (5)
Geometric parameters (Å, º) top
Bi1—O12.254 (5)C5—C61.349 (10)
Bi1—O22.513 (5)C6—C71.379 (10)
Bi1—C12.782 (8)C7—C21.364 (10)
O1—C11.280 (8)C7—H70.9300
O2—C11.260 (8)C6—H60.9300
C1—C21.472 (10)C3—H30.9300
C2—C31.394 (10)C4—H40.9300
C3—C41.378 (10)C5—H50.9300
C4—C51.372 (12)
O1—Bi1—O1i81.2 (2)C4—C5—C6119.8 (8)
O1—Bi1—O2i76.50 (17)C5—C6—C7122.0 (8)
O1—Bi1—O253.78 (18)C6—C7—C2118.8 (8)
O1i—Bi1—O2131.88 (18)C7—C2—C3119.8 (8)
O2i—Bi1—O2119.38 (4)C2—C7—H7120.6
C1—O1—Bi1100.2 (5)C6—C7—H7120.6
C1—O2—Bi188.5 (4)C5—C6—H6119.0
O2—C1—O1117.2 (7)C7—C6—H6119.0
O2—C1—C2123.1 (7)C4—C3—H3120.0
O1—C1—C2119.5 (8)C2—C3—H3120.0
C1—C2—C7121.2 (7)C5—C4—H4120.2
C1—C2—C3118.9 (7)C3—C4—H4120.2
C2—C3—C4120.0 (8)C6—C5—H5120.1
C3—C4—C5119.6 (8)C4—C5—H5120.1
O1i—Bi1—O1—C1165.2 (4)O2—C1—C2—C7163.1 (8)
O1ii—Bi1—O1—C182.8 (5)O1—C1—C2—C712.8 (11)
O2i—Bi1—O1—C1140.1 (5)O2—C1—C2—C313.7 (11)
O1—Bi1—O2—C13.1 (4)O1—C1—C2—C3170.4 (7)
O2ii—Bi1—O1—C1102.3 (5)C3—C2—C7—C62.5 (12)
O1i—Bi1—O2—C127.3 (5)C1—C2—C7—C6179.2 (7)
O1ii—Bi1—O2—C192.0 (5)C2—C7—C6—C51.7 (13)
O2i—Bi1—O2—C138.8 (5)C7—C2—C3—C42.4 (12)
O2ii—Bi1—O2—C1125.6 (4)C1—C2—C3—C4179.2 (8)
Bi1—O2—C1—O15.0 (7)C2—C3—C4—C51.5 (13)
Bi1—O2—C1—C2171.0 (7)C7—C6—C5—C40.9 (13)
Bi1—O1—C1—O25.7 (8)C3—C4—C5—C60.8 (13)
Bi1—O1—C1—C2170.5 (6)
Symmetry codes: (i) y+1, xy+2, z; (ii) x+y1, x+1, z.

Experimental details

Crystal data
Chemical formula[Bi(C7H5O2)3]
Mr572.31
Crystal system, space groupTrigonal, R3
Temperature (K)295
a, c (Å)19.5608 (19), 4.0967 (5)
V3)1357.5 (2)
Z3
Radiation typeMo Kα
µ (mm1)9.77
Crystal size (mm)0.07 × 0.01 × 0.01
Data collection
DiffractometerOxford Diffraction Gemini R Ultra
diffractometer
Absorption correctionMulti-scan
(CrysAlis PRO; Oxford Diffraction, 2010)
Tmin, Tmax0.954, 1.000
No. of measured, independent and
observed [I > 2σ(I)] reflections
3909, 1355, 1076
Rint0.087
(sin θ/λ)max1)0.661
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.042, 0.049, 0.76
No. of reflections1355
No. of parameters84
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)1.52, 0.68
Absolute structureFlack (1983), 622 Friedel pairs
Absolute structure parameter0.034 (12)

Computer programs: CrysAlis PRO, (Oxford Diffraction, 2010), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008), Mercury (Macrae et al., 2006), publCIF (Westrip, 2010) and enCIFer (Allen et al., 2004).

 

Acknowledgements

This work was supported by a grant from BRHE (RUX0–008–NO–06) and the program of the Presidium of Russian Academy of Sciences `Basic research for medicine'; the diffractometer was purchased using money from the Innovation Project of Rosobrazovanie #456 (2007–2009).

References

First citationAlcock, N. W. (1972). Advances in Inorganic Chemistry and Radiochemistry, edited by H. J. Emeleus & A. G. Sharpe, pp. 1–58. New York: Academic Press.  Google Scholar
First citationAllen, F. H., Johnson, O., Shields, G. P., Smith, B. R. & Towler, M. (2004). J. Appl. Cryst. 37, 335–338.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationFlack, H. D. (1983). Acta Cryst. A39, 876–881.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationGoddard, P. J., Klinger, J. D., Dhal, P. K., Mandeville, H. W. III, Fitzpatrick, R. J. & Neenan, X. T. (2003). US Patent 6565895.  Google Scholar
First citationHanawalt, J. D., Rihh, H. W. & Frevel, L. K. (1938). Ind. Eng. Chem. 10, 457–512.  CAS Google Scholar
First citationKislichenko, V. S. (1999). Provizor, 12, 38–40.  Google Scholar
First citationMacrae, C. F., Edgington, P. R., McCabe, P., Pidcock, E., Shields, G. P., Taylor, R., Towler, M. & van de Streek, J. (2006). J. Appl. Cryst. 39, 453–457.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationMehring, M. (2007). Coord. Chem. Rev. 251, 974–1006.  Web of Science CrossRef CAS Google Scholar
First citationOxford Diffraction (2010). CrysAlis PRO. Oxford Diffraction Ltd, Yarnton, England.  Google Scholar
First citationRae, A. D., Gainsford, G. J. & Kemmitt, T. (1998). Acta Cryst. B54, 438–442.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationRosmann, D., Hiibler, K. & Schmidt, A. (1995). Monatsh. Chem. 126, 1045–1050.  CSD CrossRef CAS Web of Science Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationTimakova, E. V., Udalova, T. A. & Yuhin, Yu. M. (2010). Chem. Sustainable Dev. 18, 79–86.  CAS Google Scholar
First citationWestrip, S. P. (2010). J. Appl. Cryst. 43, 920–925.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds