metal-organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

Poly[μ-bromido-μ-(2,2-di­methyl­propane-1,3-diyl diisocyanide)-silver(I)]: a powder diffraction study

aDepartment of Chemistry, Atomic Energy Commission of Syria (AECS), PO Box 6091, Damascus, Syrian Arab Republic
*Correspondence e-mail: cscientific@aec.org.sy

(Received 29 July 2010; accepted 1 November 2010; online 13 November 2010)

In the title compound, [AgBr(C7H10N2)]n, adjacent Ag(I) atoms are bridged by bidentate CNCH2C(CH3)2CH2NC ligands via the NC groups, forming [Ag{CNCH2C(CH3)2CH2NC}]n chains with the metal atom in a distorted tetrahedral coordination. The bromide counter-anions cross-link the Ag(I) atoms of the chains, forming a two-dimensional polymeric network {[AgI(CNCH2C(CH3)2CH2NC)]Br}n extend­ing parallel to (010). The polymeric structure is similar to that of the very recently reported Cl, I and NO3 analogues. This gives a strong indication that 2,2-dimethyl­propane-1,3-diyl diisocyanide is a potential ligand for giving polymeric structures on treatment with AgX (X = Cl, Br, I or NO3) regardless of the counter-anion used.

Related literature

For the preparation of the bidentate ligand CNCH2C(CH3)2CH2NC, see: Al-Ktaifani et al. (2008[Al-Ktaifani, M., Rukiah, M. & Shaaban, A. (2008). Pol. J. Chem. 82, 547-557.]). For similar polymeric structures, see: Al-Ktaifani et al. (2008[Al-Ktaifani, M., Rukiah, M. & Shaaban, A. (2008). Pol. J. Chem. 82, 547-557.]); Rukiah & Al-Ktaifani (2008[Rukiah, M. & Al-Ktaifani, M. (2008). Acta Cryst. C64, m170-m172.], 2009[Rukiah, M. & Al-Ktaifani, M. (2009). Acta Cryst. C65, m135-m138.]). For disocyano ligands and their coordination complexes, see: Harvey (2001[Harvey, P. D. (2001). Coord. Chem. Rev. 219, 17-52.]); Sakata et al. (2003[Sakata, K., Urabe, K., Hashimoto, M., Yanagi, T., Tsuge, A. & &Angelici, R. J. (2003). Synth. React. Inorg. Met. Org. Chem. 33, 11-22.]); Espinet et al. (2000[Espinet, P., Soulantica, K., Charmant, J. P. H. & Orpen, A. G. (2000). Chem. Commun. pp. 915-916.]); Moigno et al. (2002[Moigno, D., Callegas-Gaspar, B., Gil-Rubio, J., Brandt, C. D., Werner, H. & Kiefer, W. (2002). Inorg. Chim. Acta, 334, 355-364.]). For chelate complexing, see: Chemin et al. (1996[Chemin, N., D`hardemare, A., Bouquillon, S., Fagret, D. & Vidal, M. (1996). Appl. Radiat. Isot. 47, 479-487.]). Pseudo-Voigt profile coefficients as parameterized in Thompson et al. (1987[Thompson, P., Cox, D. E. & Hastings, J. B. (1987). J. Appl. Cryst. 20, 79-83.]). Asymmetry correction of Finger et al. (1994[Finger, L. W., Cox, D. E. & Jephcoat, A. P. (1994). J. Appl. Cryst. 27, 892-900.]). Microstrain broadening by Stephens (1999[Stephens, P. W. (1999). J. Appl. Cryst. 32, 281-289.]). Indexing was performed using the program DICVOL04 (Boultif & Louër, 2004[Boultif, A. & Louër, D. (2004). J. Appl. Cryst. 37, 724-731.]). The best estimated space group was determined with the help of the program Check Group inter­faced by WinPLOTR (Roisnel & Rodriguez-Carvajal, 2001[Roisnel, T. & Rodriguez-Carvajal, J. (2001). Mater. Sci. Forum, 378-381, 118-123.]). The powder diffraction pattern was subsequently refined using the LeBail method by the program FULLPROF (Rodriguez-Carvajal, 2001[Rodriguez-Carvajal, J. (2001). FULLPROF. CEA/Saclay, France.]). The program GSAS (Larson & Von Dreele, 2004[Larson, A. C. & Von Dreele, R. B. (2004). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.]) was inter­faced by EXPGUI (Toby, 2001[Toby, B. H. (2001). J. Appl. Cryst. 34, 210-213.]). The preferred orientation was modeled using a spherical-harmonics description (Von Dreele, 1997[Von Dreele, R. B. (1997). J. Appl. Cryst. 30, 517-525.]).

[Scheme 1]

Experimental

Crystal data
  • [AgBr(C7H10N2)]

  • Mr = 309.94

  • Orthorhombic, P b c a

  • a = 16.24649 (13) Å

  • b = 16.59379 (12) Å

  • c = 7.40433 (4) Å

  • V = 1996.14 (2) Å3

  • Z = 8

  • Cu Kα1 radiation, λ = 1.54060 Å

  • μ = 20.43 mm−1

  • T = 298 K

  • flat sheet, 7.0 × 7.0 mm

Data collection
  • STOE STADI P Transmission diffractometer

  • Specimen mounting: drifted powder between two Mylar foils

  • Data collection mode: transmission

  • Scan method: step

  • Absorption correction: for a cylinder mounted on the φ axis function for a flat sample in transmission geometry (GSAS; Larson & Von Dreele, 2004[Larson, A. C. & Von Dreele, R. B. (2004). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.]) Tmin = 0.139, Tmax = 0.192

  • 2θmin = 4.97°, 2θmax = 89.95°, 2θstep = 0.02°

Refinement
  • Rp = 0.020

  • Rwp = 0.027

  • Rexp = 0.021

  • R(F2) = 0.019

  • χ2 = 1.638

  • 4250 data points

  • 172 parameters

  • 40 restraints

  • H-atom parameters constrained

Table 1
Selected geometric parameters (Å, °)

Ag1—Br1 2.7680 (19)
Ag1—Br1i 2.832 (2)
Ag1—C1 2.140 (9)
Ag1—C7ii 2.162 (10)
Br1—Ag1—Br1i 106.50 (7)
Br1—Ag1—C1 107.1 (4)
Br1—Ag1—C7iii 98.9 (4)
Br1i—Ag1—C1 106.9 (4)
Br1i—Ag1—C7iii 94.6 (4)
C1—Ag1—C7iii 139.3 (6)
Ag1—Br1—Ag1iv 93.22 (6)
Symmetry codes: (i) [x, -y+{\script{3\over 2}}, z+{\script{1\over 2}}]; (ii) [x-{\script{1\over 2}}, -y+{\script{3\over 2}}, -z+1]; (iii) [x+{\script{1\over 2}}, -y+{\script{5\over 2}}, -z+1]; (iv) [x, -y+{\script{3\over 2}}, z-{\script{1\over 2}}].

Data collection: WinXPOW (Stoe & Cie, 1999[Stoe & Cie (1999). WinXPow. Stoe & Cie, Darmstadt, Germany.]); cell refinement: GSAS (Larson & Von Dreele, 2004[Larson, A. C. & Von Dreele, R. B. (2004). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.]); data reduction: WinXPOW; program(s) used to solve structure: FOX (Favre-Nicolin & Černý, 2002[Favre-Nicolin, V. & Černý, R. (2002). J. Appl. Cryst. 35, 734-743.]); program(s) used to refine structure: GSAS (Larson & Von Dreele, 2004[Larson, A. C. & Von Dreele, R. B. (2004). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.]); molecular graphics: ORTEP-3 (Farrugia, 1997[Farrugia, L. J. (1997). J. Appl. Cryst. 30, 565.]); software used to prepare material for publication: publCIF (Westrip, 2010[Westrip, S. P. (2010). J. Appl. Cryst. 43, 920-925.]).

Supporting information


Comment top

In order to better understand and further explore the chemistry of 2,2-dimethylpropane-1,3-diyl diisocyanide, the synthesis and solid state characterization of the polymeric complex {[AgI(CNCH2C(CH3)2CH2NC)]Br}n is presented. Treatment of AgBr with two equimolar amount of 2,2-dimethylpropane-1,3-diyl diisocyanide in dry EtOH at room temperature afforded a highly insoluble white powder (I) even in polar or coordinate solvents. These strongly gave an indication that the obtained compound (I) have a polymeric structure, which is very similar to the polymeric structure of {[AgI(CNCH2C(CH3)2CH2NC)]X}n (X = Cl- or I-) (Al-Ktaifani et al., 2008; Rukiah & Al-Ktaifani, 2009).

The solid state structure of (I) was confirmed by X-ray powder diffraction study exhibiting, as expected, a polymeric structure, which is very similar to the analogous Cl-, I- and NO3- polymers. In the obtained structure, the AgI centers are bridged with each of the two adjacent Ag neighbours by the bidentate ligands CNCH2C(CH3)2CH2NC via the NC groups to form {AgI(CNCH2C(CH3)2CH2NC)}n chains. The Br- counterpart anions are cross linked the Ag centres of the chains to form a polymeric 2-D network {[AgI(CNCH2C(CH3)2CH2NC)]Br}n (Fig. 1). In the same manner to the polymeric structure of Cl-, I- and NO3- analogues, the CNCH2C(CH3)2CH2NC in the complex just behaves as bis-monodentate and the chelate behaviour is completely absent. This is undoubtedly expected for steric reason as the distance between the two isocyanide groups in the CNCH2C(CH3)2CH2NC molecule are relatively too short to allow chelate complexing (Chemin et al., 1996) (Fig.2).

As the conformation of the bidentate ligand (CNCH2C(CH3)2CH2NC) in the three polymeric structures are almost alike, it can be concluded that their molecular structures are very similar. Therefore it can be stated the counterpart anion (Cl-, Br- or I-) have no effective role in changing the polymeric structure of the complex. It is also noteworthy, that the bidentate ligand exhibits a very strong tendency to form polymeric complexes rather than dimeric or trimeric complexes suggesting the 2,2-dimethylpropane-1,3-diyl diisocyanide to be a potential bidentate ligand in the syntheses of organometallic polymers of different transition metals.

Related literature top

For the preparation of the bidentate ligand CNCH2C(CH3)2CH2NC, see: Al-Ktaifani et al. (2008). For similar polymeric structures, see: Al-Ktaifani et al. (2008); Rukiah & Al-Ktaifani (2008, 2009). For related literature [on what subject?], see: Harvey (2001); Sakata et al., 2003; Espinet et al., 2000; Moigno et al., 2002). For chelate complexing, see: Chemin et al. (1996). Pseudovoigt profile coefficients as parameterized in (Thompson et al., 1987). Asymmetry correction of Finger et al. (1994). Microstrain broadening by Stephens (1999). Indexing was performed using the program DICVOL04 (Boultif & Louër, 2004). The best estimated space group was determined with the help of the program Check Group interfaced by WinPLOTR (Roisnel & Rodriguez-Carvajal, 2001). The powder diffraction pattern from 5 to 90° (2q) was subsequently refined with these cell and space group using LeBail method by the program FULLPROF (Rodriguez-Carvajal, 2001). The program GSAS (Larson & Von Dreele, 2004) was interfaced by EXPGUI (Toby, 2001. The preferred orientation was modeled using a spherical-harmonics description (Von Dreele, 1997).

Experimental top

All reactions and manipulations were carried out under inert atmosphere by using two fold vacuum line and schlenk technique. Solvents were dried and distilled over sodium wire; glassware dried and flamed before used. AgBr was a commercial sample and was used as received. IR spectra were operated on FTIR Jasco 300 E. Microanalysis was performed using EURO EA. Powder X-ray diffraction was performed by Stoe Transmission diffractometre (Stadi P).

A solution of CNCH2C(CH3)2CH2NC (0.30 g, 2.45 mmol) in EtOH (5 ml) was added to a suspension of AgBr (0.22 g, 1.19 mmol) in dry EtOH (10 ml) at room temperature. The resulting solution was stirred for overnight, and then filtered and volatiles were removed in vacuo. The obtained product was washed with ether to afford a white powder (0.29 g, yield 80%, m.p. starts to decompose at 395 K). Analytical data for AgC7H10N2Br: found C, 27.95%; H, 3.35%; N, 7.99%; required: C, 27.12%; H, 3.25%; N, 9.03%. IR (KBr) νcm-1: 2201.6 (N C).

Refinement top

The powder sample was slightly ground in a mortar, loaded into two foils of Mylar and fixed in the sample holder with a mask of suitable internal diameter (7.0 mm). Data were collected at room temperature and pressure in transmission geometry employing Cu Kα1 radiation. Indexing was performed using the program DICVOL04 (Boultif & Louër, 2004) with default options. An orthorhombic unit cell of reasonable volume (assuming Z=8) gave indexing figures of merit M20=18.0, F20=36.9(0.0090, 60). The best estimated space group in the orthorhombic system was Pcab which determined with the help of the program Check Group interfaced by WinPLOTR (Roisnel & Rodriguez-Carvajal, 2001). The parameters a and b were interchanged for working with the standard setting of space group i.e Pbca. The powder diffraction pattern from 5 to 90° (2q) was subsequently refined with these cell and space group using LeBail method by the program FULLPROF (Rodriguez-Carvajal, 2001). One line with very low intensity was not indexed with the previous cell and corresponds to the reflection (111) of the AgBr. The program FOX (Favre-Nicolin & Černý, 2002) was employed for structure solution. The powder pattern was truncated to 55° in 2θ (Cu Kα1 ), corresponding to real-space resolution of 1.67 Å. The Monte Carlo simulated annealing (parallel tempering algorithm) used to solve the crystal structure of compound (I) from powder pattern in direct space. One molecule of CNCH2C(CH3)2CH2NC ligand and two free atoms of Ag and Br were introduced randomly in the orthorhombic cell calculated by Le Bail refinement. The H atoms can be ignored during the structure solution process because they do not contribute significantly to the powder diffraction pattern, due to their low X-ray scattering power. During the parallel tempering calculations, the ligand had the possibility to translate, to rotate around its centre of mass and to modify its torsion angles and the atoms Ag and Br had the possibility to modify its position in the unit cell. The model found by FOX was introduced in the program GSAS (Larson & Von Dreele, 2004), interfaced by EXPGUI (Toby, 2001) for Rietveld refinements as a starting point. The background was refined using a shifted Chebyshev polynomial with 20 coefficients. The Thompson-Cox-Hastings (Thompson et al., 1987) pseudo-Voigt profile function was used with an axial divergence asymmetry correction of (Finger et al., 1994). The two asymmetry parameters of this function S/L and D/L were both fixed at 0.0215 during the Rietveld refinement.

Geometric soft restraints were applied to the C°N, N—C and C—C distances to guide them towards their normal values, but no restrains were imposed on the Ag—C and Ag—Br distances. Likewise, no restraints were imposed on bond angles. The hydrogen atoms were introduced at theoretical positions with CH2 and CH3 distances constrained to be 0.97 Å for CH3 and 0.98 Å for CH2. They were refined with restrains on their bonds distances and bond angles to their normal values. One isotropic atomic displacement parameter was introduced per types of atoms C, N and H. The final refinement cycles were performed using anisotropic displacement parameters for Ag and Br atoms. Intensities were corrected for absorption effects with a function for a flat plate sample in transmission geometry (function number 4 in GSAS). The value of with m.d was 0.8. The plate normal can be either perpendicular to the diffraction vector or tilted by some fixed angle φ in the diffraction plane. The preferred orientation was modeled using a spherical-harmonics description (Von Dreele, 1997) with 18 coefficients. In the course of the refinement, the structure of AgBr has been introduced in the final refinement. The unit-cell parameters, the atomic displacement parameters of Ag and Br and the profile parameters were allowed to vary of this compound. The amount of this impurity was about 0.1%. The observed and calculated diffraction patterns for the refined crystal structure are shown in Fig. 3.

Structure description top

In order to better understand and further explore the chemistry of 2,2-dimethylpropane-1,3-diyl diisocyanide, the synthesis and solid state characterization of the polymeric complex {[AgI(CNCH2C(CH3)2CH2NC)]Br}n is presented. Treatment of AgBr with two equimolar amount of 2,2-dimethylpropane-1,3-diyl diisocyanide in dry EtOH at room temperature afforded a highly insoluble white powder (I) even in polar or coordinate solvents. These strongly gave an indication that the obtained compound (I) have a polymeric structure, which is very similar to the polymeric structure of {[AgI(CNCH2C(CH3)2CH2NC)]X}n (X = Cl- or I-) (Al-Ktaifani et al., 2008; Rukiah & Al-Ktaifani, 2009).

The solid state structure of (I) was confirmed by X-ray powder diffraction study exhibiting, as expected, a polymeric structure, which is very similar to the analogous Cl-, I- and NO3- polymers. In the obtained structure, the AgI centers are bridged with each of the two adjacent Ag neighbours by the bidentate ligands CNCH2C(CH3)2CH2NC via the NC groups to form {AgI(CNCH2C(CH3)2CH2NC)}n chains. The Br- counterpart anions are cross linked the Ag centres of the chains to form a polymeric 2-D network {[AgI(CNCH2C(CH3)2CH2NC)]Br}n (Fig. 1). In the same manner to the polymeric structure of Cl-, I- and NO3- analogues, the CNCH2C(CH3)2CH2NC in the complex just behaves as bis-monodentate and the chelate behaviour is completely absent. This is undoubtedly expected for steric reason as the distance between the two isocyanide groups in the CNCH2C(CH3)2CH2NC molecule are relatively too short to allow chelate complexing (Chemin et al., 1996) (Fig.2).

As the conformation of the bidentate ligand (CNCH2C(CH3)2CH2NC) in the three polymeric structures are almost alike, it can be concluded that their molecular structures are very similar. Therefore it can be stated the counterpart anion (Cl-, Br- or I-) have no effective role in changing the polymeric structure of the complex. It is also noteworthy, that the bidentate ligand exhibits a very strong tendency to form polymeric complexes rather than dimeric or trimeric complexes suggesting the 2,2-dimethylpropane-1,3-diyl diisocyanide to be a potential bidentate ligand in the syntheses of organometallic polymers of different transition metals.

For the preparation of the bidentate ligand CNCH2C(CH3)2CH2NC, see: Al-Ktaifani et al. (2008). For similar polymeric structures, see: Al-Ktaifani et al. (2008); Rukiah & Al-Ktaifani (2008, 2009). For related literature [on what subject?], see: Harvey (2001); Sakata et al., 2003; Espinet et al., 2000; Moigno et al., 2002). For chelate complexing, see: Chemin et al. (1996). Pseudovoigt profile coefficients as parameterized in (Thompson et al., 1987). Asymmetry correction of Finger et al. (1994). Microstrain broadening by Stephens (1999). Indexing was performed using the program DICVOL04 (Boultif & Louër, 2004). The best estimated space group was determined with the help of the program Check Group interfaced by WinPLOTR (Roisnel & Rodriguez-Carvajal, 2001). The powder diffraction pattern from 5 to 90° (2q) was subsequently refined with these cell and space group using LeBail method by the program FULLPROF (Rodriguez-Carvajal, 2001). The program GSAS (Larson & Von Dreele, 2004) was interfaced by EXPGUI (Toby, 2001. The preferred orientation was modeled using a spherical-harmonics description (Von Dreele, 1997).

Computing details top

Data collection: WinXPOW (Stoe & Cie, 1999); cell refinement: GSAS (Larson & Von Dreele, 2004); data reduction: WinXPOW (Stoe & Cie, 1999); program(s) used to solve structure: FOX (Favre-Nicolin & Černý, 2002); program(s) used to refine structure: GSAS (Larson & Von Dreele, 2004); molecular graphics: ORTEP-3 (Farrugia, 1997); software used to prepare material for publication: publCIF (Westrip, 2010).

Figures top
[Figure 1] Fig. 1. A view, along the c axis of the crystal structure of compound (I), H atoms are not shown for clarity.
[Figure 2] Fig. 2. The asymmetric unit of (I) and atom-numbering are shown.
[Figure 3] Fig. 3. Final observed (points), calculated (line) and difference profiles for the Rietveled refinement of (I).
Poly[µ-bromido-µ-(2,2-dimethylpropane-1,3-diyl diisocyanide)-silver(I)] top
Crystal data top
[AgBr(C7H10N2)]F(000) = 1184.0
Mr = 309.94Dx = 2.063 Mg m3
Orthorhombic, PbcaCu Kα1 radiation, λ = 1.54060 Å
Hall symbol: -P 2ac 2abµ = 20.43 mm1
a = 16.24649 (13) ÅT = 298 K
b = 16.59379 (12) ÅParticle morphology: fine powder visual estimate
c = 7.40433 (4) ÅWhite
V = 1996.14 (2) Å3flat sheet, 7.0 × 7.0 mm
Z = 8Specimen preparation: Prepared at 298 K and 101.3 kPa
Data collection top
STOE STADI P Transmission
diffractometer
Scan method: step
Radiation source: sealed X-ray tube, C-TechAbsorption correction: for a cylinder mounted on the φ axis
function for a flat plate sample in transmission geometry absorption correction 'GSAS (Larson & Von Dreele, 2004)'
Ge 111 monochromatorTmin = 0.139, Tmax = 0.192
Specimen mounting: drifted powder between two Mylar foils2θmin = 4.970°, 2θmax = 89.950°, 2θstep = 0.02°
Data collection mode: transmission
Refinement top
Least-squares matrix: full172 parameters
Rp = 0.02040 restraints
Rwp = 0.027H-atom parameters constrained
Rexp = 0.021(Δ/σ)max = 0.02
R(F2) = 0.01907Background function: GSAS Background function number 1 with 20 terms. Shifted Chebyshev function of 1st kind 1: 1519.26 2: -1446.56 3: 737.807 4: -254.400 5: 19.2069 6: 34.2759 7: -57.6962 8: 44.0465 9: 4.23667 10: 15.2262 11: -36.4418 12: 19.8416 13: 11.6080 14: -21.7772 15: 7.42188 16: 2.13196 17: -8.09916 18: 10.4475 19: -3.62142 20: 2.86699
4250 data pointsPreferred orientation correction: Spherical harmonics function
Excluded region(s): none
Crystal data top
[AgBr(C7H10N2)]V = 1996.14 (2) Å3
Mr = 309.94Z = 8
Orthorhombic, PbcaCu Kα1 radiation, λ = 1.54060 Å
a = 16.24649 (13) ŵ = 20.43 mm1
b = 16.59379 (12) ÅT = 298 K
c = 7.40433 (4) Åflat sheet, 7.0 × 7.0 mm
Data collection top
STOE STADI P Transmission
diffractometer
Absorption correction: for a cylinder mounted on the φ axis
function for a flat plate sample in transmission geometry absorption correction 'GSAS (Larson & Von Dreele, 2004)'
Specimen mounting: drifted powder between two Mylar foilsTmin = 0.139, Tmax = 0.192
Data collection mode: transmission2θmin = 4.970°, 2θmax = 89.950°, 2θstep = 0.02°
Scan method: step
Refinement top
Rp = 0.0204250 data points
Rwp = 0.027172 parameters
Rexp = 0.02140 restraints
R(F2) = 0.01907H-atom parameters constrained
Special details top

Experimental. The sample was ground lightly in a mortar, loaded between two Myler foils and fixed in the sample holder with a mask of 7.0 mm intrnal diameter.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Ag10.38967 (9)0.80095 (7)0.4117 (2)0.05958
Br10.30684 (11)0.82642 (9)0.0900 (3)0.06015
C10.5098 (7)0.7575 (9)0.344 (2)0.057 (2)*
C20.6370 (3)0.6752 (3)0.2513 (6)0.057 (2)*
C30.6320 (4)0.5873 (3)0.3162 (7)0.057 (2)*
C40.5598 (2)0.5488 (2)0.2127 (5)0.057 (2)*
C50.6150 (2)0.5772 (2)0.5193 (5)0.057 (2)*
C60.7112 (3)0.5453 (3)0.2551 (6)0.057 (2)*
C70.8331 (7)0.6053 (8)0.4282 (19)0.057 (2)*
N10.5660 (5)0.7181 (6)0.3133 (11)0.044 (3)*
N20.7802 (6)0.5754 (5)0.3512 (12)0.044 (3)*
H2a0.686770.700430.300040.1*
H2b0.638720.676610.118950.1*
H6a0.706390.487210.276920.1*
H6b0.719370.554770.125730.1*
H4a0.578350.531890.093790.1*
H4b0.539850.502320.27930.1*
H4c0.515760.58780.199850.1*
H5a0.66220.5960.587680.1*
H5b0.566850.608610.55220.1*
H5c0.604990.520860.545820.1*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Ag10.0490 (14)0.0637 (13)0.0660 (12)0.0106 (10)0.0053 (16)0.0066 (11)
Br10.079 (2)0.0452 (15)0.0560 (16)0.0074 (12)0.011 (2)0.0034 (14)
Geometric parameters (Å, º) top
Ag1—Br12.7680 (19)C3—C51.538 (5)
Ag1—Br1i2.832 (2)C3—C61.533 (5)
Ag1—C12.140 (9)C4—H4a0.97
Ag1—C7ii2.162 (10)C4—H4b0.97
Br1—Ag12.7680 (19)C4—H4c0.97
Br1—Ag1iii2.832 (2)C5—H5a0.97
C1—N11.146 (16)C5—H5b0.97
C2—C31.538 (5)C5—H5c0.97
C2—N11.431 (5)C6—H6a0.98
C2—H2a0.98C6—H6b0.98
C2—H2b0.98C7—Ag1iv2.162 (10)
C3—C41.540 (5)C7—N21.144 (16)
Br1—Ag1—Br1i106.50 (7)C3—C4—H4b109.3
Br1—Ag1—C1107.1 (4)C3—C4—H4c109.5
Br1—Ag1—C7v98.9 (4)H4a—C4—H4b109.5
Br1i—Ag1—C1106.9 (4)H4a—C4—H4c109.4
Br1i—Ag1—C7v94.6 (4)H4b—C4—H4c109.4
C1—Ag1—C7v139.3 (6)C3—C5—H5a109.4
Ag1—Br1—Ag1iii93.22 (6)C3—C5—H5b109.4
Ag1—C1—N1164.9 (14)C3—C5—H5c109.4
C3—C2—N1109.2 (6)H5a—C5—H5b109.5
C3—C2—H2a109.5H5a—C5—H5c109.5
C3—C2—H2b109.7H5b—C5—H5c109.5
N1—C2—H2a109.5C3—C6—N2110.8 (6)
N1—C2—H2b109.4C3—C6—H6a109.3
H2a—C2—H2b109.5C3—C6—H6b109.2
C2—C3—C4106.1 (4)N2—C6—H6a109.1
C2—C3—C5114.7 (4)N2—C6—H6b109.1
C2—C3—C6107.1 (4)H6a—C6—H6b109.3
C4—C3—C5107.8 (4)Ag1vi—C7—N2154.8 (13)
C4—C3—C6107.7 (4)C1—N1—C2171.9 (13)
C5—C3—C6113.0 (4)C6—N2—C7174.9 (13)
C3—C4—H4a109.6
C1—Ag1—Br1—Ag1iii31.9 (5)N1—C2—C3—C468.0 (13)
C7ii—Ag1—Br1—Ag1iii179.7 (4)N1—C2—C3—C550.8 (14)
Br1i—Ag1—Br1—Ag1iii82.21 (8)N1—C2—C3—C6177.1 (10)
Br1—Ag1—C7ii—N2ii70 (3)C2—C3—C6—N268.7 (13)
C1—Ag1—C7ii—N2ii160 (3)C4—C3—C6—N2177.4 (10)
Br1—Ag1—Br1i—Ag1i168.31 (7)C5—C3—C6—N258.6 (14)
C1—Ag1—Br1i—Ag1i77.5 (4)
Symmetry codes: (i) x, y+3/2, z+1/2; (ii) x1/2, y+3/2, z+1; (iii) x, y+3/2, z1/2; (iv) x+1/2, y+3/2, z+1; (v) x+1/2, y+5/2, z+1; (vi) x+3/2, y+5/2, z+1.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
C2—H2A···N20.982.602.950 (17)101
C4—H4C···N10.972.452.908 (18)108
C5—H5A···N20.972.622.959 (18)101
C5—H5B···N10.972.532.903 (16)103
C6—H6A···Br1vii0.982.853.820 (13)169
C6—H6B···Br1viii0.982.913.671 (13)136
Symmetry codes: (vii) x+1/2, y+3/2, z; (viii) x+1, y1/2, z+1/2.

Experimental details

Crystal data
Chemical formula[AgBr(C7H10N2)]
Mr309.94
Crystal system, space groupOrthorhombic, Pbca
Temperature (K)298
a, b, c (Å)16.24649 (13), 16.59379 (12), 7.40433 (4)
V3)1996.14 (2)
Z8
Radiation typeCu Kα1, λ = 1.54060 Å
µ (mm1)20.43
Specimen shape, size (mm)Flat sheet, 7.0 × 7.0
Data collection
DiffractometerSTOE STADI P Transmission
Specimen mountingDrifted powder between two Mylar foils
Data collection modeTransmission
Scan methodStep
Absorption correctionFor a cylinder mounted on the φ axis
function for a flat plate sample in transmission geometry absorption correction 'GSAS (Larson & Von Dreele, 2004)'
Tmin, Tmax0.139, 0.192
2θ values (°)2θmin = 4.970 2θmax = 89.950 2θstep = 0.02
Refinement
R factors and goodness of fitRp = 0.020, Rwp = 0.027, Rexp = 0.021, R(F2) = 0.01907, χ2 = 1.638
No. of parameters172
No. of restraints40
H-atom treatmentH-atom parameters constrained

Computer programs: WinXPOW (Stoe & Cie, 1999), GSAS (Larson & Von Dreele, 2004), FOX (Favre-Nicolin & Černý, 2002), ORTEP-3 (Farrugia, 1997), publCIF (Westrip, 2010).

Selected geometric parameters (Å, º) top
Ag1—Br12.7680 (19)Ag1—C12.140 (9)
Ag1—Br1i2.832 (2)Ag1—C7ii2.162 (10)
Br1—Ag1—Br1i106.50 (7)Br1i—Ag1—C7iii94.6 (4)
Br1—Ag1—C1107.1 (4)C1—Ag1—C7iii139.3 (6)
Br1—Ag1—C7iii98.9 (4)Ag1—Br1—Ag1iv93.22 (6)
Br1i—Ag1—C1106.9 (4)
Symmetry codes: (i) x, y+3/2, z+1/2; (ii) x1/2, y+3/2, z+1; (iii) x+1/2, y+5/2, z+1; (iv) x, y+3/2, z1/2.
 

Acknowledgements

The authors thank Professors I. Othman, Director General, and T. Yassine, Head of the Chemistry Department, for their support and encouragement.

References

First citationAl-Ktaifani, M., Rukiah, M. & Shaaban, A. (2008). Pol. J. Chem. 82, 547–557.  CAS Google Scholar
First citationBoultif, A. & Louër, D. (2004). J. Appl. Cryst. 37, 724–731.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationChemin, N., D`hardemare, A., Bouquillon, S., Fagret, D. & Vidal, M. (1996). Appl. Radiat. Isot. 47, 479–487.  Google Scholar
First citationEspinet, P., Soulantica, K., Charmant, J. P. H. & Orpen, A. G. (2000). Chem. Commun. pp. 915–916.  Web of Science CSD CrossRef Google Scholar
First citationFarrugia, L. J. (1997). J. Appl. Cryst. 30, 565.  CrossRef IUCr Journals Google Scholar
First citationFavre-Nicolin, V. & Černý, R. (2002). J. Appl. Cryst. 35, 734–743.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationFinger, L. W., Cox, D. E. & Jephcoat, A. P. (1994). J. Appl. Cryst. 27, 892–900.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationHarvey, P. D. (2001). Coord. Chem. Rev. 219, 17–52.  Web of Science CrossRef Google Scholar
First citationLarson, A. C. & Von Dreele, R. B. (2004). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.  Google Scholar
First citationMoigno, D., Callegas-Gaspar, B., Gil-Rubio, J., Brandt, C. D., Werner, H. & Kiefer, W. (2002). Inorg. Chim. Acta, 334, 355–364.  Web of Science CSD CrossRef CAS Google Scholar
First citationRodriguez-Carvajal, J. (2001). FULLPROF. CEA/Saclay, France.  Google Scholar
First citationRoisnel, T. & Rodriguez-Carvajal, J. (2001). Mater. Sci. Forum, 378–381, 118–123.  CrossRef CAS Google Scholar
First citationRukiah, M. & Al-Ktaifani, M. (2008). Acta Cryst. C64, m170–m172.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationRukiah, M. & Al-Ktaifani, M. (2009). Acta Cryst. C65, m135–m138.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationSakata, K., Urabe, K., Hashimoto, M., Yanagi, T., Tsuge, A. & &Angelici, R. J. (2003). Synth. React. Inorg. Met. Org. Chem. 33, 11–22.  Web of Science CrossRef CAS Google Scholar
First citationStephens, P. W. (1999). J. Appl. Cryst. 32, 281–289.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationStoe & Cie (1999). WinXPow. Stoe & Cie, Darmstadt, Germany.  Google Scholar
First citationThompson, P., Cox, D. E. & Hastings, J. B. (1987). J. Appl. Cryst. 20, 79–83.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationToby, B. H. (2001). J. Appl. Cryst. 34, 210–213.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationVon Dreele, R. B. (1997). J. Appl. Cryst. 30, 517–525.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationWestrip, S. P. (2010). J. Appl. Cryst. 43, 920–925.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds