organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

1,3-Bis(1-phenyl­eth­yl)imidazolidine-2-thione

aDepartment of Chemistry, University of Malakand, Pakistan, bUniversity of Sargodha, Department of Physics, Sargodha, Pakistan, cDepartment of Pharmacy, University of Malakand, Pakistan, and dDepartment of Biotechnology, University of Malakand, Pakistan
*Correspondence e-mail: dmntahir_uos@yahoo.com

(Received 18 March 2012; accepted 21 March 2012; online 24 March 2012)

The complete molecule of the title compound, C19H22N2S, is generated by crystallographic twofold symmetry with the C=S group lying on the rotation axis. The imidazolidine ring adopts a flattened twist conformation. The dihedral angle between the asymmetric part of the imidazolidine-2-thione fragment and the benzene ring is 89.49 (17)°.

Related literature

For a related structure, see: Umar et al. (2012[Umar, M. N., Tahir, M. N., Shoaib, M., Ali, A. & Ziauddin, (2012). Acta Cryst. E68, o743.]).

[Scheme 1]

Experimental

Crystal data
  • C19H22N2S

  • Mr = 310.45

  • Tetragonal, P 43 21 2

  • a = 5.8692 (5) Å

  • c = 50.637 (5) Å

  • V = 1744.3 (3) Å3

  • Z = 4

  • Mo Kα radiation

  • μ = 0.18 mm−1

  • T = 296 K

  • 0.28 × 0.24 × 0.20 mm

Data collection
  • Bruker Kappa APEXII CCD diffractometer

  • Absorption correction: multi-scan (SADABS; Bruker, 2005[Bruker (2005). SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]) Tmin = 0.957, Tmax = 0.966

  • 18956 measured reflections

  • 1717 independent reflections

  • 1150 reflections with I > 2σ(I)

  • Rint = 0.062

Refinement
  • R[F2 > 2σ(F2)] = 0.070

  • wR(F2) = 0.170

  • S = 1.11

  • 1717 reflections

  • 106 parameters

  • H atoms treated by a mixture of independent and constrained refinement

  • Δρmax = 0.18 e Å−3

  • Δρmin = −0.17 e Å−3

  • Absolute structure: Flack (1983[Flack, H. D. (1983). Acta Cryst. A39, 876-881.]), 569 Friedel pairs

  • Flack parameter: 0.1 (3)

Data collection: APEX2 (Bruker, 2007[Bruker (2007). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]); cell refinement: SAINT (Bruker, 2007[Bruker (2007). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]); data reduction: SAINT; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); molecular graphics: ORTEP-3 for Windows (Farrugia, 1997[Farrugia, L. J. (1997). J. Appl. Cryst. 30, 565.]) and PLATON (Spek, 2009[Spek, A. L. (2009). Acta Cryst. D65, 148-155.]); software used to prepare material for publication: WinGX (Farrugia, 1999[Farrugia, L. J. (1999). J. Appl. Cryst. 32, 837-838.]) and PLATON.

Supporting information


Comment top

The title compound, Fig. 1, has been synthesized as a part of our ongoing project related to imidazolidinethione.

Recently we have reported the crystal structure of 1,3-bis(1-cyclohexylethyl)imidazolidine (Umar et al., 2012) that is related to the title compound.

The molecule has twofold rotation symmetry about the C=S bond of imidazolidinethione fragment and therefore the asymmetric unit consists of half of the molecule. The asymmetric part of imidazolidinethione fragment A (S1/C1/N1/C2) and the benzene ring B (C6/C7/C9/C10) form the dihedral angle of 89.49 (17)°.

Related literature top

For a related structure, see: Umar et al. (2012).

Experimental top

(S)-1-Phenylethanamine (2.5 equiv.) and 1,2-dibromoethane (1 equiv.) were placed in a pressure vessel and heated at 393 K for 5 h, during which the reaction mixture solidified. The system was cooled to room temperature and NaOH (1 N, 20 ml) and ethyl acetate (20 ml) were added into the reaction mixture. After dissolving the reaction mixture, the crude product was extracted with ethyl acetate (3×25 ml). The combined organic layers were concentrated and subjected to column chromatography. The product obtained from column chromatography (1 equiv.) was added to toluene (0.4 M) in pressure vessel and thiocarbonyldiimidazol (1.1 equiv.) was added to it. This mixture was heated at about 373 K for 15 h. Again the extraction with ethyl acetate (3×25 ml) was carried out by using column chromatography to get the required product (yield: 80%).White prisms of of the title compound were obtained by recrystalization from methanol during 48 h (m.p. 416 K).

Refinement top

The H atoms were positioned geometrically (C–H = 0.93–0.98 Å) and refined as riding with Uiso(H) = xUeq(C), where x = 1.5 for methyl and x = 1.2 for all other H-atoms.

Structure description top

The title compound, Fig. 1, has been synthesized as a part of our ongoing project related to imidazolidinethione.

Recently we have reported the crystal structure of 1,3-bis(1-cyclohexylethyl)imidazolidine (Umar et al., 2012) that is related to the title compound.

The molecule has twofold rotation symmetry about the C=S bond of imidazolidinethione fragment and therefore the asymmetric unit consists of half of the molecule. The asymmetric part of imidazolidinethione fragment A (S1/C1/N1/C2) and the benzene ring B (C6/C7/C9/C10) form the dihedral angle of 89.49 (17)°.

For a related structure, see: Umar et al. (2012).

Computing details top

Data collection: APEX2 (Bruker, 2007); cell refinement: SAINT (Bruker, 2007); data reduction: SAINT (Bruker, 2007); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: ORTEP-3 for Windows (Farrugia, 1997) and PLATON (Spek, 2009); software used to prepare material for publication: WinGX (Farrugia, 1999) and PLATON (Spek, 2009).

Figures top
[Figure 1] Fig. 1. View of the title molecule with displacement ellipsoids drawn at the 50% probability level. H atoms are shown by small circles of arbitrary radii.
1,3-Bis(1-phenylethyl)imidazolidine-2-thione top
Crystal data top
C19H22N2SDx = 1.182 Mg m3
Mr = 310.45Mo Kα radiation, λ = 0.71073 Å
Tetragonal, P43212Cell parameters from 1150 reflections
Hall symbol: P 4nw 2abwθ = 3.2–26.0°
a = 5.8692 (5) ŵ = 0.18 mm1
c = 50.637 (5) ÅT = 296 K
V = 1744.3 (3) Å3Prism, white
Z = 40.28 × 0.24 × 0.20 mm
F(000) = 664
Data collection top
Bruker Kappa APEXII CCD
diffractometer
1717 independent reflections
Radiation source: fine-focus sealed tube1150 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.062
Detector resolution: 7.80 pixels mm-1θmax = 26.0°, θmin = 3.2°
ω scansh = 37
Absorption correction: multi-scan
(SADABS; Bruker, 2005)
k = 77
Tmin = 0.957, Tmax = 0.966l = 6262
18956 measured reflections
Refinement top
Refinement on F2Hydrogen site location: inferred from neighbouring sites
Least-squares matrix: fullH atoms treated by a mixture of independent and constrained refinement
R[F2 > 2σ(F2)] = 0.070 w = 1/[σ2(Fo2) + (0.0459P)2 + 1.2139P]
where P = (Fo2 + 2Fc2)/3
wR(F2) = 0.170(Δ/σ)max < 0.001
S = 1.11Δρmax = 0.18 e Å3
1717 reflectionsΔρmin = 0.17 e Å3
106 parametersExtinction correction: SHELXL97 (Sheldrick, 2008), Fc*=kFc[1+0.001xFc2λ3/sin(2θ)]-1/4
0 restraintsExtinction coefficient: 0.011 (3)
Primary atom site location: structure-invariant direct methodsAbsolute structure: Flack (1983), 569 Friedel pairs
Secondary atom site location: difference Fourier mapAbsolute structure parameter: 0.1 (3)
Crystal data top
C19H22N2SZ = 4
Mr = 310.45Mo Kα radiation
Tetragonal, P43212µ = 0.18 mm1
a = 5.8692 (5) ÅT = 296 K
c = 50.637 (5) Å0.28 × 0.24 × 0.20 mm
V = 1744.3 (3) Å3
Data collection top
Bruker Kappa APEXII CCD
diffractometer
1717 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2005)
1150 reflections with I > 2σ(I)
Tmin = 0.957, Tmax = 0.966Rint = 0.062
18956 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.070H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.170Δρmax = 0.18 e Å3
S = 1.11Δρmin = 0.17 e Å3
1717 reflectionsAbsolute structure: Flack (1983), 569 Friedel pairs
106 parametersAbsolute structure parameter: 0.1 (3)
0 restraints
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
S11.12952 (18)1.12952 (18)0.00000.0805 (6)
N10.8146 (6)0.8492 (6)0.02136 (5)0.0692 (10)
C10.9276 (6)0.9276 (6)0.00000.0598 (14)
C20.6343 (8)0.6919 (7)0.01411 (7)0.0723 (12)
H2A0.48580.76360.01540.087*
H2B0.63670.55710.02520.087*
C30.8267 (8)0.9498 (8)0.04762 (8)0.0687 (12)
H30.962 (7)1.038 (7)0.0469 (8)0.082*
C40.6154 (10)1.0894 (8)0.05338 (9)0.1018 (18)
H4A0.58841.19320.03910.153*
H4B0.63721.17380.06940.153*
H4C0.48680.98970.05530.153*
C50.8783 (7)0.7647 (7)0.06798 (7)0.0579 (10)
C61.0569 (8)0.6131 (9)0.06414 (9)0.0843 (14)
H61.14540.62190.04890.101*
C71.1034 (9)0.4468 (9)0.08326 (11)0.0963 (17)
H71.22130.34370.08050.116*
C80.9810 (11)0.4343 (9)0.10538 (10)0.1002 (19)
H81.01610.32530.11810.120*
C90.8049 (10)0.5808 (9)0.10942 (9)0.0949 (17)
H90.71570.57000.12460.114*
C100.7614 (8)0.7429 (8)0.09100 (7)0.0764 (12)
H100.64420.84560.09430.092*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
S10.0776 (8)0.0776 (8)0.0861 (11)0.0227 (10)0.0077 (7)0.0077 (7)
N10.085 (3)0.070 (2)0.0521 (17)0.0229 (18)0.0062 (16)0.0039 (17)
C10.062 (2)0.062 (2)0.056 (3)0.002 (3)0.007 (2)0.007 (2)
C20.084 (3)0.073 (3)0.060 (2)0.024 (2)0.003 (2)0.0031 (19)
C30.080 (3)0.063 (3)0.063 (2)0.005 (2)0.007 (2)0.006 (2)
C40.138 (5)0.081 (4)0.086 (3)0.046 (4)0.015 (3)0.008 (3)
C50.057 (2)0.063 (2)0.053 (2)0.001 (2)0.005 (2)0.0054 (18)
C60.070 (3)0.108 (4)0.074 (3)0.012 (3)0.003 (2)0.006 (3)
C70.089 (4)0.090 (4)0.110 (4)0.037 (3)0.024 (3)0.012 (3)
C80.140 (5)0.084 (4)0.077 (3)0.021 (4)0.034 (3)0.002 (3)
C90.123 (5)0.097 (4)0.065 (3)0.006 (4)0.003 (3)0.006 (3)
C100.092 (3)0.079 (3)0.058 (2)0.017 (2)0.004 (2)0.001 (2)
Geometric parameters (Å, º) top
S1—C11.676 (5)C4—H4C0.9600
N1—C11.350 (4)C5—C101.359 (5)
N1—C21.451 (5)C5—C61.388 (6)
N1—C31.456 (5)C6—C71.402 (7)
C1—N1i1.350 (4)C6—H60.9300
C2—C2i1.507 (7)C7—C81.333 (7)
C2—H2A0.9700C7—H70.9300
C2—H2B0.9700C8—C91.360 (7)
C3—C41.515 (6)C8—H80.9300
C3—C51.528 (6)C9—C101.357 (6)
C3—H30.95 (4)C9—H90.9300
C4—H4A0.9600C10—H100.9300
C4—H4B0.9600
C1—N1—C2111.9 (3)C3—C4—H4C109.5
C1—N1—C3124.7 (3)H4A—C4—H4C109.5
C2—N1—C3121.6 (3)H4B—C4—H4C109.5
N1i—C1—N1107.9 (4)C10—C5—C6116.2 (4)
N1i—C1—S1126.1 (2)C10—C5—C3123.1 (4)
N1—C1—S1126.1 (2)C6—C5—C3120.7 (4)
N1—C2—C2i102.7 (2)C5—C6—C7119.8 (4)
N1—C2—H2A111.2C5—C6—H6120.1
C2i—C2—H2A111.2C7—C6—H6120.1
N1—C2—H2B111.2C8—C7—C6120.9 (5)
C2i—C2—H2B111.2C8—C7—H7119.5
H2A—C2—H2B109.1C6—C7—H7119.5
N1—C3—C4110.8 (4)C7—C8—C9120.1 (5)
N1—C3—C5109.7 (3)C7—C8—H8120.0
C4—C3—C5114.6 (4)C9—C8—H8120.0
N1—C3—H3103 (2)C10—C9—C8118.9 (5)
C4—C3—H3113 (3)C10—C9—H9120.6
C5—C3—H3104 (3)C8—C9—H9120.6
C3—C4—H4A109.5C9—C10—C5124.1 (5)
C3—C4—H4B109.5C9—C10—H10117.9
H4A—C4—H4B109.5C5—C10—H10117.9
C2—N1—C1—N1i6.1 (2)C4—C3—C5—C107.4 (6)
C3—N1—C1—N1i171.0 (5)N1—C3—C5—C649.8 (5)
C2—N1—C1—S1173.9 (2)C4—C3—C5—C6175.2 (4)
C3—N1—C1—S19.0 (5)C10—C5—C6—C71.4 (7)
C1—N1—C2—C2i14.8 (5)C3—C5—C6—C7179.1 (4)
C3—N1—C2—C2i179.8 (4)C5—C6—C7—C81.2 (8)
C1—N1—C3—C4102.8 (5)C6—C7—C8—C91.5 (8)
C2—N1—C3—C460.7 (5)C7—C8—C9—C102.0 (8)
C1—N1—C3—C5129.6 (4)C8—C9—C10—C52.4 (8)
C2—N1—C3—C566.9 (5)C6—C5—C10—C92.1 (7)
N1—C3—C5—C10132.8 (4)C3—C5—C10—C9179.7 (4)
Symmetry code: (i) y, x, z.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
C3—H3···S10.95 (4)2.63 (4)3.176 (4)117 (3)

Experimental details

Crystal data
Chemical formulaC19H22N2S
Mr310.45
Crystal system, space groupTetragonal, P43212
Temperature (K)296
a, c (Å)5.8692 (5), 50.637 (5)
V3)1744.3 (3)
Z4
Radiation typeMo Kα
µ (mm1)0.18
Crystal size (mm)0.28 × 0.24 × 0.20
Data collection
DiffractometerBruker Kappa APEXII CCD
Absorption correctionMulti-scan
(SADABS; Bruker, 2005)
Tmin, Tmax0.957, 0.966
No. of measured, independent and
observed [I > 2σ(I)] reflections
18956, 1717, 1150
Rint0.062
(sin θ/λ)max1)0.617
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.070, 0.170, 1.11
No. of reflections1717
No. of parameters106
H-atom treatmentH atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å3)0.18, 0.17
Absolute structureFlack (1983), 569 Friedel pairs
Absolute structure parameter0.1 (3)

Computer programs: APEX2 (Bruker, 2007), SAINT (Bruker, 2007), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008), ORTEP-3 for Windows (Farrugia, 1997) and PLATON (Spek, 2009), WinGX (Farrugia, 1999) and PLATON (Spek, 2009).

 

Acknowledgements

The authors acknowledge the provision of funds for the purchase of the diffractometer and encouragement by Dr Muhammad Akram Chaudhary, Vice Chancellor, University of Sargodha, Pakistan. The authors from Malakand University also gratefully acknowledge the financial support provided by the Higher Education Commission (HEC), Islamabad, Pakistan.

References

First citationBruker (2005). SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationBruker (2007). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationFarrugia, L. J. (1997). J. Appl. Cryst. 30, 565.  CrossRef IUCr Journals Google Scholar
First citationFarrugia, L. J. (1999). J. Appl. Cryst. 32, 837–838.  CrossRef CAS IUCr Journals Google Scholar
First citationFlack, H. D. (1983). Acta Cryst. A39, 876–881.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSpek, A. L. (2009). Acta Cryst. D65, 148–155.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationUmar, M. N., Tahir, M. N., Shoaib, M., Ali, A. & Ziauddin, (2012). Acta Cryst. E68, o743.  Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds