organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

2-[(4-Bromo­benzyl­­idene)amino]­ethanol

aSchool of Chemistry and Physics, University of KwaZulu-Natal, Westville Campus, Private Bag X54001, Durban 4000, South Africa
*Correspondence e-mail: vanzylw@ukzn.ac.za

(Received 18 October 2012; accepted 23 November 2012; online 28 November 2012)

In the crystal structure of the title compound, C9H10BrNO, molecules are linked via O—H⋯N hydrogen bonds of a moderate strength between the hy­droxy groups and the imine N atoms. These hydrogen bonds, as well as the planes of the bromo­phenyl rings, are situated in alternating planes parallel to (013) and (0-13). In addition, there are weak C—H⋯π inter­actions in the structure.

Related literature

For previous work on the preparation of imine-based ligands, by our group, see: Williams et al. (2007[Williams, D. B. G., Traut, T., Kriel, F. H. & Van Zyl, W. E. (2007). Inorg. Chem. Commun. 10, 538-542.]). For related structures and their preparation, see: Elslager et al. (1956[Elslager, E. F., Benton, E. L., Short, F. W. & Tendick, F. H. (1956). J. Am. Chem. Soc. 78, 3453-3457.]); Vennila et al. (2010[Vennila, J. P., Thiruvadigal, D. J., Kavitha, H. P., Gunasekaran, B. & Manivannan, V. (2010). Acta Cryst. E66, o316.]); Jafarpour et al. (2011[Jafarpour, M., Rezaeifard, A., Gazkar, S. & Danehchin, M. (2011). Transition Met. Chem. 36, 685-690.]). For imines, see: Morrison et al. (1987[Morrison, R. T. & Boyd, R. N. (1987). Organic Chemistry, 5th ed., pp. 945-946. Boston: Allyn and Bacon Inc.]); Tidwell (2007[Tidwell, T. T. (2007). Angew. Chem. Int. Ed. 46, 2-7.]) and for their biological activity, see: Solomon & Lowery (1993[Solomon, E. I. & Lowery, M. D. (1993). Science, 259, 1575-1581.]); Fioravanti et al. (1995[Fioravanti, R., Biava, M., Porretta, G. C., Landolfi, C., Simonetti, N., Villa, A., Conte, E. & Porta-Puglia, A. (1995). Eur. J. Med. Chem. 30, 123-132.]); Mallikarjun & Sangamesh (1997[Mallikarjun, S. Y. & Sangamesh, A. P. (1997). Transition Met. Chem. 22, 220-224.]); Samadhiya & Halve (2001[Samadhiya, S. & Halve, A. (2001). Orient. J. Chem. 17, 119-122.]); Gerdemann et al. (2002[Gerdemann, C., Eicken, C. & Krebs, B. (2002). Acc. Chem. Res. 35, 183-191.]); Veverková & Toma (2008[Veverková, E. & Toma, Š. (2008). Chem. Pap. 62, 334-338.]); Khan et al. (2009[Khan, K. M., Khan, M., Ali, M., Taha, M., Rasheed, S., Perveen, S. & Choudhary, M. I. (2009). Bioorg. Med. Chem. 17, 7795-7801.]). For classification of hydrogen bonds, see: Gilli & Gilli (2009[Gilli, G. & Gilli, P. (2009). The Nature of the Hydrogen Bond, p. 61. New York: Oxford University Press Inc.]).

[Scheme 1]

Experimental

Crystal data
  • C9H10BrNO

  • Mr = 228.09

  • Monoclinic, C c

  • a = 22.349 (4) Å

  • b = 6.0328 (10) Å

  • c = 7.3673 (12) Å

  • β = 107.980 (3)°

  • V = 944.8 (3) Å3

  • Z = 4

  • Mo Kα radiation

  • μ = 4.30 mm−1

  • T = 173 K

  • 0.36 × 0.15 × 0.02 mm

Data collection
  • Bruker Kappa DUO APEXII diffractometer

  • Absorption correction: multi-scan (SADABS; Sheldrick, 2008a[Sheldrick, G. M. (2008a). SADABS. University of Göttingen, Germany.]) Tmin = 0.305, Tmax = 0.919

  • 3713 measured reflections

  • 1651 independent reflections

  • 1550 reflections with I > 2σ(I)

  • Rint = 0.035

Refinement
  • R[F2 > 2σ(F2)] = 0.025

  • wR(F2) = 0.059

  • S = 1.00

  • 1651 reflections

  • 113 parameters

  • 1 restraint

  • H atoms treated by a mixture of independent and constrained refinement

  • Δρmax = 0.71 e Å−3

  • Δρmin = −0.45 e Å−3

  • Absolute structure: Flack (1983[Flack, H. D. (1983). Acta Cryst. A39, 876-881.]), 788 Friedel pairs

  • Flack parameter: 0.022 (12)

Table 1
Hydrogen-bond geometry (Å, °)

Cg1 is the centroid of the C1–C6 ring.

D—H⋯A D—H H⋯A DA D—H⋯A
O1—H1⋯N1i 0.97 (3) 1.83 (3) 2.791 (4) 172 (4)
C2—H2⋯Cg1ii 0.95 2.83 3.58 (3) 137
C5—H5⋯Cg1iii 0.95 2.79 3.512 (3) 134
Symmetry codes: (i) [x, -y+1, z+{\script{1\over 2}}]; (ii) [x, -y+1, z-{\script{1\over 2}}]; (iii) [x, -y+2, z+{\script{1\over 2}}].

Data collection: APEX2 (Bruker, 2006[Bruker (2006). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]); cell refinement: SAINT (Bruker, 2006[Bruker (2006). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]); data reduction: SAINT; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008b[Sheldrick, G. M. (2008b). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008b[Sheldrick, G. M. (2008b). Acta Cryst. A64, 112-122.]); molecular graphics: ORTEP-3 (Farrugia, 2012[Farrugia, L. J. (2012). J. Appl. Cryst. 45, 849-854.]); software used to prepare material for publication: SHELXL97.

Supporting information


Comment top

The title compound, 2-(4-bromobenzylideneamino)ethanol, was prepared and crystallized during our ongoing research on nitrogen-based ligands (Williams et al., 2007). The molecule belongs to the class of compounds known as the Schiff bases (Tidwell, 2007). The primary feature of all the Schiff bases is presence of a functional group that includes a carbon-nitrogen double bond, known as the imine group. The imine's nitrogen atom can be connected to a hydrogen atom, or aryl or alkyl groups (Jafarpour et al., 2011). In cases where the hydrogen atom is bonded to the nitrogen atom, i. e. RCHNH, the imine is an unstable chemical species (an intermediate) because it is prone to decomposition (through reaction with oxygen or moisture in air). This intermediate is formed during the reaction between an aldehyde and ammonia that leads to direct conversion into the amine product by a process called reductive amination (Morrison et al., 1987). In cases where an aryl- or alkyl group (as is the case in the present study) is bonded to the nitrogen atom, i. e. R CNR, the imine shows a significant improvement in stability and the compound can be isolated. In the present study, the alkyl group with a stabilizing effect (specifically, an ethyl group) is bonded to the nitrogen atom while the ethyl group also contains a hydroxyl moiety.

The Schiff bases have a number of useful applications such as their use as ligands in coordination chemistry and their role in forming supramolecular metallocycles and metallocages. In addition, the aryl Schiff bases, such as the title compound, are also commonly synthesized for pharmaceutical objectives or used in the synthesis of biologically useful compounds. These biological compounds include a range of applications in anti-fungal, anti-inflammatory, anti-HIV, anti-bacterial, herbicidal, and anti-cancer activities (Khan et al., 2009; Gerdemann et al., 2002; Samadhiya & Halve, 2001; Mallikarjun & Sangamesh, 1997; Fioravanti et al., 1995; Solomon & Lowery, 1993).

As a result of importance of the Schiff bases outlined above, new synthesis methods are being developed in order to obtain better yields at lower cost (Veverková & Toma, 2008).

The most commonly used procedure for the synthesis of the Schiff base compounds involves condensation of an amine with an aldehyde (Elslager et al., 1956). This was also the procedure that we have used in the present study. We have synthesized the title molecule with goal to use it as a ligand in metal complexation. As a result, we wanted to discover its 3-dimensional spatial arrangement in the solid-state so that we can determine whether appropriate binding sites through donor N and O atoms on the title compound has the potential to bind to a metal center. This hypothesis needs to be tested with future experimentation.

The basic structural features of the title structure (Fig. 1) agrees well with the geometric parameters of similar previously synthesized structures such as (E)-4-[(4-bromobenzylidene)amino]-phenol (Vennila et al., 2010). The C-Br bond distance in the title compound is 1.900 (3) Å, which is in agreement with the related value of 1.894 (2) Å (Vennila et al., 2010). The packing of the molecules is shown in Figs. 2 and 3. Fig 3 shows the O-H···N hydrogen bonds of a moderate strength (Gilli & Gilli, 2009; Table 1) between the hydroxyls and the imine N atoms. The hydrogen bonds as well as

the planes of the bromophenyl rings are situated in alternating planes parallel to (0 1 3) and (0 -1 3). In addition, there are weak C-H···π-electron ring interactions in the structure (Table 1).

Related literature top

For previous work by our group, see: Williams et al. (2007). For related structures and their preparation, see: Elslager et al. (1956); Vennila et al. (2010); Jafarpour et al. (2011). For imines, see: Morrison et al. (1987); Tidwell (2007) and for their biological activity, see: Solomon & Lowery (1993); Fioravanti et al. (1995); Mallikarjun & Sangamesh (1997); Samadhiya & Halve (2001); Gerdemann et al. (2002); Veverková & Toma (2008); Khan et al. (2009). For classification of hydrogen bonds, see: Gilli & Gilli (2009).

Experimental top

To a solution of 4-bromobenzaldehyde (2.031 g, 0.011 mol) in dry toluene (40 ml), ethanolamine (0.671 g, 0.011 mol), also dissolved in dry toluene (40 ml), was added dropwise in intervals of 30 minutes while stirring the formed suspension. The reaction mixture was stirred under ambient conditions for further 2 hrs, and then refluxed at 120 °C for 3 hrs. The water was removed by distillation in a Dean-Stark distillation receiver and the toluene was removed in vacuo. Upon cooling of the reaction mixture, the material precipitated. The viscous matter was dissolved in 20 ml of dichloromethane. The solution was then filtered through Celite (diatomaceous earth, a filter-aid) and dried over anhydrous magnesium sulfate to remove traces of water. Large, platelike colourless crystals with dimensions 0.36×0.15×0.02 mm and a hexagonal shape were grown from 200 mg of powder sample through slow diffusion of hexane solvent layered on top of dichloromethane solution. Yield: 1.516 g (60.4%); M.p. 81 - 82°C. 1H NMR: δ (p.p.m.): 3.69 (2H, t, J = 4.85 Hz, CH2OH), 3.86 (2H, d, J = 5.06 Hz, CH2-N), 7.51 (4H, dd, J = 6.24 Hz, 8.81 aryl-H), 8.61 (1H, s, CHN). 13C NMR: δ (p.p.m.): 62.119 (CH2OH), 63.331 (N—CH2), 125.314 (C-aryl) 129.607 (C-aryl), 131.860 (C-aryl), 134.629 (C-aryl), 162.009 (CN).

Refinement top

The hydrogen atoms were identified in the difference electron density map, after which the aryl and methyl H atoms were situated into idealized positions and constrained to ride on their parent atoms, with C···H = 0.95 and 0.98 Å, respectively. Uiso(Haryl) = 1.2×UeqCaryl and Uiso(Hmethyl) = 1.5×UeqCmethyl. The methyl groups were refined as rigid rotors in order to fit to the electron density. The positional parameters of the primary and the secondary amine H atoms were freely refined while their displacement parameters were constrained as 1.2 multiples of their carrier atoms. 788 Friedel pairs have been measured.

Computing details top

Data collection: APEX2 (Bruker, 2006); cell refinement: SAINT (Bruker, 2006); data reduction: SAINT (Bruker, 2006); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008b); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008b); molecular graphics: ORTEP-3 (Farrugia, 2012); software used to prepare material for publication: SHELXL97 (Sheldrick, 2008b).

Figures top
[Figure 1] Fig. 1. The molecule with the atom labelling scheme. The displacement ellipsoids are shown the 50% probability level.
[Figure 2] Fig. 2. The crystal packing of the title compound as seen approximately along the b axis.
[Figure 3] Fig. 3. The crystal structure of the title compound with the hydrogen bonds (Tab. 1) indicated as dashed lines. The structure is approximately viewed along the c axis. Symmetry code: (i) x, -y + 1, z + 1/2.
2-[(4-Bromobenzylidene)amino]ethanol top
Crystal data top
C9H10BrNOF(000) = 456
Mr = 228.09Dx = 1.604 Mg m3
Monoclinic, CcMo Kα radiation, λ = 0.71073 Å
Hall symbol: C -2ycCell parameters from 3713 reflections
a = 22.349 (4) Åθ = 3.5–25.3°
b = 6.0328 (10) ŵ = 4.30 mm1
c = 7.3673 (12) ÅT = 173 K
β = 107.980 (3)°Plate, colourless
V = 944.8 (3) Å30.36 × 0.15 × 0.02 mm
Z = 4
Data collection top
Bruker Kappa DUO APEXII
diffractometer
1651 independent reflections
Radiation source: fine-focus sealed tube1550 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.035
0.5° ϕ scans and ω scansθmax = 25.3°, θmin = 3.5°
Absorption correction: multi-scan
(SADABS; Sheldrick, 2008a)
h = 2426
Tmin = 0.305, Tmax = 0.919k = 77
3713 measured reflectionsl = 88
Refinement top
Refinement on F2Secondary atom site location: difference Fourier map
Least-squares matrix: fullHydrogen site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.025H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.059 w = 1/[σ2(Fo2) + (0.0174P)2]
where P = (Fo2 + 2Fc2)/3
S = 1.00(Δ/σ)max < 0.001
1651 reflectionsΔρmax = 0.71 e Å3
113 parametersΔρmin = 0.45 e Å3
1 restraintAbsolute structure: Flack (1983), 788 Friedel pairs
37 constraintsAbsolute structure parameter: 0.022 (12)
Primary atom site location: structure-invariant direct methods
Crystal data top
C9H10BrNOV = 944.8 (3) Å3
Mr = 228.09Z = 4
Monoclinic, CcMo Kα radiation
a = 22.349 (4) ŵ = 4.30 mm1
b = 6.0328 (10) ÅT = 173 K
c = 7.3673 (12) Å0.36 × 0.15 × 0.02 mm
β = 107.980 (3)°
Data collection top
Bruker Kappa DUO APEXII
diffractometer
1651 independent reflections
Absorption correction: multi-scan
(SADABS; Sheldrick, 2008a)
1550 reflections with I > 2σ(I)
Tmin = 0.305, Tmax = 0.919Rint = 0.035
3713 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.025H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.059Δρmax = 0.71 e Å3
S = 1.00Δρmin = 0.45 e Å3
1651 reflectionsAbsolute structure: Flack (1983), 788 Friedel pairs
113 parametersAbsolute structure parameter: 0.022 (12)
1 restraint
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Br10.682260 (18)0.64650 (5)0.71855 (2)0.04348 (12)
O10.34787 (17)0.6979 (5)1.1065 (4)0.0461 (7)
H10.359 (2)0.554 (4)1.165 (7)0.069*
N10.37448 (13)0.7338 (5)0.7440 (4)0.0352 (7)
C10.60169 (15)0.7091 (5)0.7424 (4)0.0304 (7)
C20.55354 (15)0.5562 (6)0.6774 (4)0.0302 (7)
H20.56100.41940.62440.036*
C30.49499 (17)0.6038 (5)0.6903 (5)0.0315 (7)
H30.46200.49890.64630.038*
C40.48338 (18)0.8054 (6)0.7676 (5)0.0287 (8)
C50.53236 (16)0.9557 (6)0.8318 (4)0.0315 (7)
H50.52491.09290.88440.038*
C60.59188 (17)0.9099 (6)0.8208 (5)0.0347 (8)
H60.62521.01340.86580.042*
C70.42189 (16)0.8625 (5)0.7886 (5)0.0310 (7)
H70.41731.00430.83860.037*
C80.31685 (17)0.8097 (6)0.7782 (6)0.0387 (8)
H8A0.28150.80340.65780.046*
H8B0.32200.96560.82240.046*
C90.30217 (18)0.6660 (6)0.9269 (6)0.0404 (8)
H9A0.26000.70430.93540.048*
H9B0.30160.50830.88930.048*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Br10.03404 (18)0.0539 (2)0.04599 (18)0.0060 (3)0.01748 (12)0.0006 (3)
O10.067 (2)0.0296 (13)0.0442 (18)0.0032 (15)0.0204 (15)0.0002 (12)
N10.0358 (17)0.0331 (16)0.0399 (16)0.0043 (13)0.0164 (12)0.0035 (13)
C10.0268 (18)0.0386 (18)0.0265 (16)0.0057 (14)0.0093 (13)0.0052 (14)
C20.0363 (19)0.0256 (16)0.0297 (16)0.0036 (14)0.0114 (14)0.0000 (14)
C30.040 (2)0.0247 (16)0.0302 (16)0.0039 (14)0.0115 (14)0.0020 (13)
C40.038 (2)0.0261 (16)0.0236 (17)0.0054 (16)0.0112 (15)0.0020 (13)
C50.039 (2)0.0265 (18)0.0300 (17)0.0017 (15)0.0117 (14)0.0028 (15)
C60.037 (2)0.0335 (17)0.0329 (17)0.0057 (15)0.0094 (14)0.0030 (15)
C70.0360 (19)0.0284 (17)0.0301 (16)0.0067 (14)0.0125 (14)0.0021 (13)
C80.0314 (19)0.0397 (18)0.047 (2)0.0041 (15)0.0153 (15)0.0024 (16)
C90.036 (2)0.0363 (18)0.054 (2)0.0014 (15)0.0212 (17)0.0019 (17)
Geometric parameters (Å, º) top
Br1—C11.900 (3)C4—C51.387 (5)
O1—C91.413 (5)C4—C71.471 (5)
O1—H10.968 (5)C5—C61.385 (5)
N1—C71.272 (4)C5—H50.9500
N1—C81.461 (4)C6—H60.9500
C1—C21.386 (5)C7—H70.9500
C1—C61.388 (5)C8—C91.510 (5)
C2—C31.371 (5)C8—H8A0.9900
C2—H20.9500C8—H8B0.9900
C3—C41.401 (5)C9—H9A0.9900
C3—H30.9500C9—H9B0.9900
C9—O1—H1108 (3)C5—C6—H6120.8
C7—N1—C8118.2 (3)C1—C6—H6120.8
C2—C1—C6121.3 (3)N1—C7—C4124.1 (3)
C2—C1—Br1119.5 (3)N1—C7—H7117.9
C6—C1—Br1119.2 (3)C4—C7—H7117.9
C3—C2—C1119.5 (3)N1—C8—C9110.2 (3)
C3—C2—H2120.2N1—C8—H8A109.6
C1—C2—H2120.2C9—C8—H8A109.6
C2—C3—C4120.7 (3)N1—C8—H8B109.6
C2—C3—H3119.7C9—C8—H8B109.6
C4—C3—H3119.7H8A—C8—H8B108.1
C5—C4—C3118.7 (3)O1—C9—C8110.2 (3)
C5—C4—C7118.4 (3)O1—C9—H9A109.6
C3—C4—C7122.8 (3)C8—C9—H9A109.6
C6—C5—C4121.4 (3)O1—C9—H9B109.6
C6—C5—H5119.3C8—C9—H9B109.6
C4—C5—H5119.3H9A—C9—H9B108.1
C5—C6—C1118.5 (3)
C6—C1—C2—C30.1 (5)C2—C1—C6—C50.5 (5)
Br1—C1—C2—C3178.4 (2)Br1—C1—C6—C5178.1 (2)
C1—C2—C3—C40.2 (5)C8—N1—C7—C4178.1 (3)
C2—C3—C4—C50.3 (5)C5—C4—C7—N1176.3 (3)
C2—C3—C4—C7178.6 (3)C3—C4—C7—N11.9 (5)
C3—C4—C5—C60.0 (5)C7—N1—C8—C9115.0 (4)
C7—C4—C5—C6178.3 (3)N1—C8—C9—O167.6 (4)
C4—C5—C6—C10.4 (5)
Hydrogen-bond geometry (Å, º) top
Cg1 is the centroid of the C1–C6 ring.
D—H···AD—HH···AD···AD—H···A
O1—H1···N1i0.97 (3)1.83 (3)2.791 (4)172 (4)
C2—H2···Cg1ii0.952.833.58 (3)137
C5—H5···Cg1iii0.952.793.512 (3)134
Symmetry codes: (i) x, y+1, z+1/2; (ii) x, y+1, z1/2; (iii) x, y+2, z+1/2.

Experimental details

Crystal data
Chemical formulaC9H10BrNO
Mr228.09
Crystal system, space groupMonoclinic, Cc
Temperature (K)173
a, b, c (Å)22.349 (4), 6.0328 (10), 7.3673 (12)
β (°) 107.980 (3)
V3)944.8 (3)
Z4
Radiation typeMo Kα
µ (mm1)4.30
Crystal size (mm)0.36 × 0.15 × 0.02
Data collection
DiffractometerBruker Kappa DUO APEXII
diffractometer
Absorption correctionMulti-scan
(SADABS; Sheldrick, 2008a)
Tmin, Tmax0.305, 0.919
No. of measured, independent and
observed [I > 2σ(I)] reflections
3713, 1651, 1550
Rint0.035
(sin θ/λ)max1)0.602
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.025, 0.059, 1.00
No. of reflections1651
No. of parameters113
No. of restraints1
H-atom treatmentH atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å3)0.71, 0.45
Absolute structureFlack (1983), 788 Friedel pairs
Absolute structure parameter0.022 (12)

Computer programs: APEX2 (Bruker, 2006), SAINT (Bruker, 2006), SHELXS97 (Sheldrick, 2008b), SHELXL97 (Sheldrick, 2008b), ORTEP-3 (Farrugia, 2012).

Hydrogen-bond geometry (Å, º) top
Cg1 is the centroid of the C1–C6 ring.
D—H···AD—HH···AD···AD—H···A
O1—H1···N1i0.97 (3)1.83 (3)2.791 (4)172 (4)
C2—H2···Cg1ii0.952.833.58 (3)137
C5—H5···Cg1iii0.952.793.512 (3)134
Symmetry codes: (i) x, y+1, z+1/2; (ii) x, y+1, z1/2; (iii) x, y+2, z+1/2.
 

Acknowledgements

The authors thank the National Research Foundation (NRF) and UKZN for financial support.

References

First citationBruker (2006). APEX2 and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationElslager, E. F., Benton, E. L., Short, F. W. & Tendick, F. H. (1956). J. Am. Chem. Soc. 78, 3453–3457.  CrossRef CAS Web of Science Google Scholar
First citationFarrugia, L. J. (2012). J. Appl. Cryst. 45, 849–854.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationFioravanti, R., Biava, M., Porretta, G. C., Landolfi, C., Simonetti, N., Villa, A., Conte, E. & Porta-Puglia, A. (1995). Eur. J. Med. Chem. 30, 123–132.  CrossRef CAS Web of Science Google Scholar
First citationFlack, H. D. (1983). Acta Cryst. A39, 876–881.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationGerdemann, C., Eicken, C. & Krebs, B. (2002). Acc. Chem. Res. 35, 183–191.  Web of Science CrossRef PubMed CAS Google Scholar
First citationGilli, G. & Gilli, P. (2009). The Nature of the Hydrogen Bond, p. 61. New York: Oxford University Press Inc.  Google Scholar
First citationJafarpour, M., Rezaeifard, A., Gazkar, S. & Danehchin, M. (2011). Transition Met. Chem. 36, 685–690.  Web of Science CrossRef CAS Google Scholar
First citationKhan, K. M., Khan, M., Ali, M., Taha, M., Rasheed, S., Perveen, S. & Choudhary, M. I. (2009). Bioorg. Med. Chem. 17, 7795–7801.  Web of Science CrossRef PubMed CAS Google Scholar
First citationMallikarjun, S. Y. & Sangamesh, A. P. (1997). Transition Met. Chem. 22, 220–224.  Google Scholar
First citationMorrison, R. T. & Boyd, R. N. (1987). Organic Chemistry, 5th ed., pp. 945–946. Boston: Allyn and Bacon Inc.  Google Scholar
First citationSamadhiya, S. & Halve, A. (2001). Orient. J. Chem. 17, 119–122.  CAS Google Scholar
First citationSheldrick, G. M. (2008a). SADABS. University of Göttingen, Germany.  Google Scholar
First citationSheldrick, G. M. (2008b). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSolomon, E. I. & Lowery, M. D. (1993). Science, 259, 1575–1581.  CrossRef CAS PubMed Web of Science Google Scholar
First citationTidwell, T. T. (2007). Angew. Chem. Int. Ed. 46, 2–7.  Google Scholar
First citationVennila, J. P., Thiruvadigal, D. J., Kavitha, H. P., Gunasekaran, B. & Manivannan, V. (2010). Acta Cryst. E66, o316.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationVeverková, E. & Toma, Š. (2008). Chem. Pap. 62, 334–338.  Google Scholar
First citationWilliams, D. B. G., Traut, T., Kriel, F. H. & Van Zyl, W. E. (2007). Inorg. Chem. Commun. 10, 538–542.  Web of Science CSD CrossRef CAS Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds