On the calculation of the gauge volume size for energy-dispersive X-ray diffraction. Erratum

Rowles, M.R.

doi:10.1107/S0909049511053878

Volume 19
Part 1
Page 136
January 2012

Received 13 December 2011
Accepted 13 December 2011
Online 20 December 2011

On the calculation of the gauge volume size for energy-dispersive X-ray diffraction. Erratum

Matthew R. Rowles ^a,^b,^c ^*

^aCSIRO Process Science and Engineering, Box 312, Clayton South, Victoria 3169, Australia,^bDepartment of Mechanical Engineering, The University of Melbourne, Parkville, Vic 3010, Australia, and ^cCSIRO Light Metals National Research Flagship, Box 312, Clayton South, Victoria 3168, Australia
Correspondence e-mail: matthew.rowles@csiro.au

An equation in the paper by Rowles [(2011), J. Synchrotron Rad. 18, 938-941] is corrected.

In the paper by Rowles (2011), there is an error in equation (32): the equation should read

$[p=-{h\over{2\tan\gamma}}.\eqno(32)]$

References

Rowles, M. R. (2011). J. Synchrotron Rad. 18, 938-941.

addenda and errata

On the calculation of the gauge volume size for energy-dispersive X-ray diffraction. Erratum

References