view article

Figure 7
Schematic figure of the optics set-up. Movements required of each of the four components (crystals X1 and X2, and mirrors M1 and M2) are shown by yellow arrows. The relevant dimensions used in calculating the optics elements' positions are also given. The beam offset after exiting the mirror chamber is Δy = 20 mm.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds