view article

Figure 27
Left: Danfysik `M1/M2 short' rotating coil assembly being inserted into an M1 magnet block. The frame with the outer bearing seat is mounted on the magnet. See also Fig. 3[link]. Right: Scanditronix magnet `long' rotating coil assembly being installed in a U4 magnet block. The top half is lifted up to allow access to the bearing seats. (See also Fig. 5[link], where part of the rotating coil shaft and one bearing holder can be seen.)

Journal logoJOURNAL OF
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds