![cross.png](/logos/buttonlogos/cross.png)
![cross.png](/logos/buttonlogos/cross.png)
research papers
Progress in rational methods of cryoprotection in macromolecular crystallography
aProgram in Biochemistry, Biophysics and Molecular Biology, Whitman College, Walla Walla, WA 99362, USA, and bDepartment of Physics, Whitman College, Walla Walla, WA 99362, USA
*Correspondence e-mail: juersdh@whitman.edu
Cryogenic cooling of macromolecular crystals is commonly used for X-ray data collection both to reduce crystal damage from radiation and to gather functional information by cryogenically trapping intermediates. However, the cooling process can damage the crystals. Limiting cooling-induced crystal damage often requires cryoprotection strategies, which can involve substantial screening of solution conditions and cooling protocols. Here, recent developments directed towards rational methods for cryoprotection are described. Crystal damage is described in the context of the temperature response of the crystal as a thermodynamic system. As such, the internal and external parts of the crystal typically have different cryoprotection requirements. A key physical parameter, the thermal contraction, of 26 different cryoprotective solutions was measured between 294 and 72 K. The range of contractions was 2–13%, with the more polar cryosolutions contracting less. The potential uses of these results in the development of cryocooling conditions, as well as recent developments in determining minimum cryosolution soaking times, are discussed.
Keywords: cryoprotection; cryosolutions; thermal contraction; crystal damage; domain structure.
1. Introduction
Most macromolecular crystal structures are now determined at cryogenic temperature (∼100 K) as a way of limiting the radiation damage to the crystal during the diffraction experiment (Low et al., 1966; Haas & Rossmann, 1970
; Dewan & Tilton, 1987
; Hope, 1988
). However, it is common for the cooling process to disrupt the crystal order and decrease the diffraction quality. To address this problem, the crystal is often treated with a cryoprotective solution prior to cooling (Haas & Rossmann, 1970
; Hope, 1988
; Henderson, 1990
; Rodgers, 1994
; Garman & Schneider, 1997
; Schneider, 1997
; Garman, 1999
, 2003
; Kriminski et al., 2002
; Juers & Matthews, 2004b
; Garman & Owen, 2006
). Finding the optimal cryoprotective conditions is largely dependent on the and often involves substantial screening. Here, we discuss recent developments in the understanding of cooling-induced damage and its prevention, with the long-term goal of reducing the trial-and-error aspect of cryoprotection.
Cooling-induced crystal damage has been described using the domain model, in which the actual imperfect crystal is composed of perfect subcrystals which may have different sizes, orientations and cell dimensions. Each of these aspects of the domain structure can become exaggerated with cooling, causing broadening of the Bragg spots (Nave, 1998; Dobrianov et al., 1999
; Kriminski et al., 2002
; Vahedi-Faridi et al., 2003
, 2005
; Lovelace et al., 2004
, 2006
; Jenner et al., 2007
; Juers et al., 2007
).
The underlying cause of the domain exaggerations is under investigation. In some cases, especially for large plunge-cooled crystals, temperature gradients can develop within the crystal as it is cooled (Kriminski et al., 2003). If one part of the crystal undergoes its cooling-induced change before another part, defects may be produced between these two regions. Experiments show that a `cooling zone' can propagate along the crystal and create a pulse of strain, possibly leaving behind a trail of exaggerated domain structure (Snell et al., 2002
; Lovelace et al., 2006
). Such inhomogeneous effects are more likely to be relevant for larger crystals and can be limited by cooling more slowly (Kriminski et al., 2003
), as has been observed experimentally (Yao et al., 2004
).
Even if the crystal is cooled uniformly without large temperature gradients, as is common for cooling in cold gas streams (Kriminski et al., 2003), damage can still result. In this context, an important factor appears to be thermal contraction compensation among the different constituents of the crystal (Juers & Matthews, 2001
; Kriminski et al., 2002
; Juers & Matthews, 2004a
,b
; Lovelace et al., 2006
; Fig. 1
). Because the crystal is a thermodynamic system, it undergoes a response to the decrease in temperature. The macromolecules contract, as would be expected (Frauenfelder et al., 1987
), as do the interstices within the crystal (Juers & Matthews, 2001
). Consequently, the liquid contained within the interstices must adjust or damage will result. The adjustment could take place via contraction as an inherent temperature response of the liquid, compression of the liquid by the contracting protein lattice or flowing of the liquid to other places in the crystal. Here, the inherent thermal contraction of the liquid will be considered.
![]() | Figure 1 Model for cooling-induced crystal damage. Cooling triggers contraction of the protein, lattice repacking and the consequent contraction and reshaping of the solvent channel (black outline; Juers & Matthews, 2001 ![]() |
The thermal contractions of cryosolutions have been determined for a few cases (Juers & Matthews, 2004a). In order to achieve a more complete picture of the range of behaviors, the thermal contractions of most of the common cryosolutions used in macromolecular crystallography were measured and a range of contractions of 2–13% was found. In this paper, the cryocooling problem is discussed in the context of these and other recent results.
2. Materials and methods
2.1. Preparation of solutions
Unless otherwise noted, all chemicals were purchased from Sigma–Aldrich (St Louis, Missouri, USA). Fomblin YR-1800 was obtained from Lancaster Synthesis (Ward Hill, Massachusetts, USA). Polyethylene glycol 4000, D-sorbitol, D-(+)-xylose, polyvinylpyrrolidone K 15, lithium nitrate and sodium formate were from Fluka (Steinheim, Germany). Water was purified using an E-Pure deionization system (Barnstead International, Boston, Massachusetts, USA). Binary solutions between water and the cryoprotective agent of interest were made gravimetrically.
2.2. Measurement of thermal contraction
The thermal contraction was characterized using as a metric the fractional change in the specific volume (ν),
which is related to the fractional change in the density (ρ = 1/ν),
This requires density measurements of the cryosolution at the two temperatures of interest (294 and ∼77 K). Room-temperature measurements were made with either a 25 ml volumetric flask or a 1 ml pipette (VWR, West Chester, Pennsylvania, USA) calibrated with degassed deionized water at room temperature (294 K) and an electronic balance (PG503-S DeltaRange from Mettler-Toledo, Columbus, Ohio, USA). Each solution was measured 3–19 times at room temperature (highly viscous polyethylene glycol solutions required many trials) and 5–10 times at low temperature. Low-temperature measurements were made using a buoyancy-based technique with liquid nitrogen as the displaced liquid with one variation from the method previously described (Dewar, 1902; Juers & Matthews, 2001
, 2004a
). Briefly, the pipette portion of a polyethylene transfer pipette (Samco Scientific, San Francisco, California, USA) was used to make an ∼0.7 ml tube with one end closed by melting. This tube was then suspended horizontally beneath a scale and its weight was measured in air and also when submerged in liquid nitrogen with and without the cryosolution in the tube. These four measurements permit the density at 77 K to be determined,
where Waircryosol is the weight of the cryosolution in air, Vol is the volume of the cryosolution at low temperature, is the density of liquid nitrogen and WN2 is the weight of liquid nitrogen displaced by the cryosolution.
In some cases, extra buoyancy was created from bubbles forming in the liquid nitrogen in the tube, which decreases the measured weight and causes a systematic underestimation of the density. This problem was addressed by placing the Dewar of liquid nitrogen in a bell jar attached to a vacuum pump for ∼10 min. This created supercooled nitrogen (about 67 K), which was then used as the displaced liquid, inhibiting bubble formation. This method was adopted for all solutions and the temperature of the nitrogen was measured at the same height as the tube with a platinum resistance temperature device (P/N 1PT100KN1515CLA, Omega Engineering, Inc., Stamford, Connecticut, USA; resistance was measured using a four-wire ohmmeter from Fluke Electronics, Everett, Washington, USA). This thermometer was calibrated by fitting the Callendar–Van Dusen equation describing the temperature dependence of the platinum resistance device to measurements of the resistance at four known temperatures (Childs, 2001): the melting point of nitrogen at 97.94 kPa (T = 63.17 K; R = 14.30 Ω), the boiling point of nitrogen at 96.34 kPa (T = 77.07 K; R = 20.32 Ω), the melting point of crystalline ice (T = 273.15 K, R = 100.26 Ω) and the boiling point of water (T = 373 K, R = 138.5 Ω) (Younglove, 1982
). Solid nitrogen was made via evaporative cooling. The measured resistance was corrected for self-heating by comparing the temperature measured in still liquid with the temperature measured in flowing liquid. The density of the liquid at the measured temperature was then calculated from a fit of tabulated ρ versus T data from the nitrogen equation of state (Younglove, 1982
). Because the temperature of the nitrogen varied between 67 and 77 K, the densities reported for these solutions may be treated as being at approximately 72 ± 5 K. The method was tested using deionized degassed water, with two different measuring tubes, yielding values of 0.932 ± 0.005 and 0.931 ± 0.003 g cm−3 as expected from the first buoyancy-based experiments (Dewar, 1902
) and X-ray measurements on hexagonal ice (Röttger et al., 1994
).
2.3. Calculations
Solvent-accessible surface areas were determined using the program EdPDB (Zhang & Matthews, 1995). Ideal coordinates for the cryoprotective agents were downloaded from the Protein Data Bank (Berman et al., 2000
) and the solvent-accessible surface areas (SAS) of each of the atoms in the molecule were determined using the following radii (in Å): C = 1.8, N = 1.7, O = 1.4, S = 2.0, probe = 1.4. The polarities of the cryoprotective agent and the cryoprotective solution were calculated as SAS(N, O, S)/SAS(C, N, O, S) either for the cryoprotective agent alone or the cryoprotective agent plus an equal weight of water molecules.
The correlations between the physical characteristics of the cryoprotective agents and the solutions were calculated according to
Here, x and y represent two different physical characteristics. Since not all characteristics are defined or could be found for all cryoprotective agents, the sum and averages were carried out over only the agents for which both x and y were known.
3. Results
Table 1 lists the measured values of the thermal contraction for 26 different cryosolutions. In all cases the concentrations used were 50%(w/w) or the solubility limit, whichever was lower. This concentration, which is relatively high for a typical macromolecular crystallography experiment, was chosen to ensure the vitrification of as many solutions as possible. Despite this, several solutions were tested that failed to vitrify completely, as indicated by opacity from small ice crystals forming in the solution during cooling. These solutions were 50%(w/w) sucrose, 50%(w/w) HEPES buffer, 25%(w/w) lithium sulfate, 25%(w/w) sodium chloride, 45%(w/w) sodium nitrate, 30%(w/w) lithium nitrate, 27%(w/w) lithium formate and 45%(w/w) D-(+)-trehalose. The expected contraction of some of these solutions upon full vitrification can be interpolated from our results (see below).
‡All solutions were created to be 50%(w/w) at RT or, if this was not possible, at the maximum solubility. These concentrations can be converted to other measures as follows: %(w/v) = %(w/w) × ρRT and %(v/v) = %(w/w) × (ρRT/ρliq). §RT, room temperature (294 K); LT, low temperature (liquid nitrogen at ∼72 K); 3–19 measurements were made at each temperature and σ represents the statistical variation in the measurements. ¶Density of pure liquid at ∼298 K from the literature (Yaws, 1999 ![]() ††The fractional change in the specific volume with cooling, (Δν/νRT) = (−Δρ/ρLT); σ is the propagated uncertainty. ‡‡DP6 is a commonly used solution for cryogenic cooling of tissues (Rabin et al., 1998 ![]() |
4. Discussion
4.1. Cryosolutions show a range of contractions
The contractions, which range from 2 to 13%, are related to the average bulk
coefficient,Thus, with our temperature change of ΔT ≃ 222 K, the range of expansion coefficients observed is = 1–6 × 10−4 K−1. β values for some other materials are 12 × 10−4 K−1 for liquid ethanol at 298 K, 5 × 10−4 K−1 for liquid glycerol at 293 K, 2.4 × 10−4 K−1 for glassy glycerol below the at ∼180 K, 2.5 × 10−4 K−1 for water at 298 K, 1.5 × 10−4 K−1 for hexagonal ice at 250 K and 0.5 × 10−4 K−1 for copper at 298 K (Lide, 2004
; Röttger et al., 1994
; Kauzmann, 1948
). The measured contractions are thus bracketed by the values for liquid ethanol and solid ice, which is a reasonable result since on average over the whole temperature range the materials can be viewed as being between a liquid and a solid.
4.1.1. Predicting the contraction of other cryosolutions
To predict the contraction produced by other potential cryoprotective agents, we looked for correlations between the measured contractions and other physical characteristics of the cryoprotective agents or solutions. The results are shown in Table 2. The best correlation is with the calculated polarity of the cryosolution, which is plotted in Fig. 2
. Generally, as the polarity of the solution increases its contraction decreases. Therefore, a reasonable estimation of the contractions of other potential neutral cryosolutions can probably be determined using this calculation. For example, the polarities of 50%(w/w) solutions of sucrose and trehalose are 0.92–0.93, about the same as for glucose, which indicates that the contractions of these solutions would be likely to be 2–3% if they vitrified. Salts and charged molecules were not included and their contractions cannot be predicted from Fig. 2
. These contraction values, in combination with other recent results (Chinte et al., 2005
; Geremia et al., 2006
; Berejnov et al., 2006
), offer new methods of approaching the cryocooling problem.
‡Excluding PEG. |
![]() | Figure 2 Plot of the measured thermal contraction (Δν/νRT) versus the calculated polar surface area of the cryosolution. Data are shown for the solutions from Table 1 ![]() |
4.2. Cryocooling: initial diffraction assessment
It is helpful to first assess crystal quality via a room-temperature diffraction measurement. While the classical capillary-mounting method can be technically challenging, especially for fragile crystals, easier methods of determining room-temperature diffraction quality have appeared in recent years. The simplest method is to use a standard cryoloop sealed by slipping it into a transparent capillary sleeve (Skrzypczak-Jankun et al., 1996; Mac Sweeney & D'Arcy, 2003
). This method typically requires less handling than standard capillary-mounting methods and can be carried out relatively quickly. Once the ambient temperature test has been completed, the crystal can be used for low-temperature diffraction by removing the sleeve. A version of this using thin-walled polyester tubing is commercially available (Kalinin et al., 2005
). For more fragile crystals, even less handling is possible by collecting room-temperature data from crystals as grown in situ, either in the capillary tube (Phillips, 1985
) or in the crystal-growth tray. This room-temperature assessment experiment can prove very important for the following reasons. Firstly, it provides a benchmark for subsequent steps in the analysis. Poor room-temperature diffraction indicates that it may not be worth spending significant effort on finding good cooling conditions, since cooling is usually disruptive to crystal order. Good room-temperature diffraction, on the other hand, represents a target for the optimal cooling scheme. Secondly, the room-temperature measurement is needed for determination of the thermal contraction characteristics of the crystal, as discussed further below.
4.3. Cryocooling: choosing the cryosolution
4.3.1. Internal versus external cryosolutions
In the model for crystal damage discussed in §1, the key role of the liquid within the crystals is to contract by the appropriate amount to compensate for the inherent contraction of the interstitial spaces (Juers & Matthews, 2001
; Kriminski et al., 2002
; Juers & Matthews, 2004a
,b
; Lovelace et al., 2006
). This liquid contraction can be modulated by adjusting the identity (Table 1
and Fig. 2
) and the concentration of the cryoprotective agent.
There is substantial evidence that the internal and external parts of the crystal may require different cryoprotection conditions. Firstly, the thermal behavior of the liquid inside the crystal depends on the diameter of the solvent channels, with smaller channels inhibiting bulk behavior (Weik et al., 2001, 2005
). Kwong and Liu found that in some cases the required concentration of aqueous-based cryoprotective agents could be reduced if they were used in combination with an external oil (Kwong & Liu, 1999
). This suggests that lower concentrations of cryoprotective solutions are required for vitrification and cryosolution contraction within the solvent channels than when these solutions are in bulk. Secondly, because the interstitial spaces usually contract more than the (see below), the contraction needed for the liquid within the solvent channels is probably greater than the contraction needed for the external liquid. For these reasons, it is useful to consider the cryoprotection of macromolecular crystals in two phases: equilibration with an internal cryosolution followed by the replacement of the external solution with a cryoprotective buffer (Fig. 3
).
![]() | Figure 3 Often the crystal-growth buffer (dots) needs to be exchanged for a different solution for successful cooling. The required internal cryoprotective solution (light gray) may be different from the external cryoprotective solution (dark gray). |
4.3.2. Choosing the internal cryosolution: qualitative considerations
The internal cryosolution should contain penetrating cryoprotective agents that can diffuse along the solvent channels and modulate the thermal contraction of the liquid to match the contraction of the internal spaces themselves. In the search for effective cryoprotective agents, Table 1 and Fig. 2
allow various classes of contractors to be considered. For example, sugars all give relatively low contractions, while polyethylene give higher contractions. According to the model for cryoprotection described above, one would expect that if xylose is ineffective, glucose, sucrose and other sugars would also be ineffective, but that a different result might be expected with a low-molecular-weight polyethylene glycol (PEG).
It is also generally true that higher concentrations of cryoprotective agents cause greater contraction (Juers & Matthews, 2004a), which helps to explain the observation that there can be an optimal concentration of cryoprotective agent (Mitchell & Garman, 1994
). This further suggests that a lower concentration of the better contractors would be required for the same result and there is some evidence that is consistent with this idea (Juers & Matthews, 2004b
).
The choice of the internal cryosolution should also take into consideration its compatibility with the crystal. For example, many precipitants can also act as penetrating cryoprotective agents [e.g. 2-methyl-2,4-pentanediol (MPD), low-molecular-weight PEGs, pentaerythritol propoxylate (PEP) 426, malonate, formate and salts]. In these cases, adjusting the concentration of the precipitant may be sufficient to provide the correct thermal contraction. Larger molecules, such as high-molecular-weight PEGs, are less able to penetrate the solvent channels and often require an additional cryoprotective agent, such as a low-molecular-weight PEG. Further discussion of this topic can be found in some recent reviews (Garman, 1999; Garman & Owen, 2006
).
4.3.3. Choosing the internal cryosolution: a potential quantitative method
In principle, we should be able to choose the cryosolution by matching its contraction to the contraction of the solvent channel. The fractional unit-cell volume contraction [Δcell = (Vltcell − Vrtcell)/Vrtcell] may be written as a weighted sum of the contractions of the protein (Δprot) and the solvent channel (Δch): Δcell = υprotΔprot + (1 − υprot)Δch, where υprot is the of the occupied by the protein. This yields
Δcell can be determined by making diffraction measurements at room and low temperature, which of course requires some initial success with cryocooling the crystal. υprot can be determined from the unit-cell parameters, and the molecular weight of the macromolecule (υprot ≃ 1.23/VM, where VM is the crystal-packing parameter; Matthews, 1968). Using an average value of Δprot = −0.013 (Juers & Matthews, 2001
), one can then estimate Δch (the contraction of the channels). Table 1
can then be used to pick a cryosolution with the same contraction as the channels.
Using published average values for the contraction parameters (Δcell = −0.042, Δprot = −0.013, υprot = 0.47; Matthews, 1968; Juers & Matthews, 2001
; Kantardjieff & Rupp, 2003
), an average value of Δcell is found to be −0.068. At the same time, for a sample of 18 crystals (Juers & Matthews, 2001
) the range of Δcell was between +0.034 and −0.151. From Table 1
, this suggests that the optimal cryosolution for the average protein crystal is 50%(w/w) ethylene glycol, but also that a variety of cryosolutions will be required to optimally cool all protein crystals.
It is interesting to note that the cryosolution based on glycerol, the most commonly used cryoprotective agent (Garman & Doublié, 2003), appears in the lowest fifth of the measured contraction range. This suggests that if another cryoprotective agent, such as ethylene glycol, was adopted as the first choice rather than glycerol, lower concentrations would be necessary. Ethylene glycol is also a little smaller than glycerol and is less viscous: thus it is easier to work with and, based on its diffusion constant, should equilibrate at least 15% faster than glycerol.
Here, several assumptions are made: the unit-cell contraction is independent of the cryosolution, the contraction of the liquid in the actual protein crystal is unaffected by other components of the crystal buffer and the magnitude of the solvent contraction is unaffected by the confining nature of the solvent channels. Additionally, the contraction measurements were carried out by cooling to ∼72 K, whereas most crystals are cooled to ∼100 K for X-ray measurements. This means that the values in Table 1 are probably an overestimation of the contraction when cooling to ∼100 K, but this is likely to be by less than 10% since the extra cooling between 72 and 100 K occurs in the already vitrified state, where the contraction is lower than in the liquid state.
It remains to be determined whether or not this is a generally effective method of choosing the cryosolution. Empirical results from an earlier study using crystals of thermolysin and β-galactosidase implied that the required bulk value of the contraction may be somewhat smaller than Δch (Juers & Matthews, 2004a), which suggests that the predicted cryosolution should be used at a lower concentration than 50%(w/w). This would be helpful since most crystals probably will not tolerate such high concentrations of cryoprotective agents. In any case, the findings presented here should help in the optimization of the cryoprotective solution and with the further development of predictive methods of cryoprotective agent selection.
We further note that the list of cryosolutions in Table 1 is not exhaustive. Because the cryosolution properties may be modulated inside the solvent channels and the critical concentration for vitrification should be lower (Berejnov et al., 2006
) than in the ∼1 ml samples used for the contraction measurements, solutions that did not vitrify during these measurements can still be effective penetrating cryoprotective agents. Their expected contractions can be estimated by calculating the polar surface area of the solution (e.g. based on this idea, sucrose and trehalose solutions are expected to cause contractions similar to the glucose solution).
4.3.4. Choosing the external cryosolution
The external cryosolution need not contain penetrating cryoprotective agents, but should prevent ice formation. Critical concentrations for ice prevention in crystal-sized samples of various solutions have been reported (Garman & Mitchell, 1996; McFerrin & Snell, 2002
; Chinte et al., 2005
; Berejnov et al., 2006
). Thus, if the internal cryosolution is above this concentration, it will probably be an effective external cryosolution as well. Another option, which may be especially useful in cases where the optimal internal cryosolution has a relatively low concentration of cryoprotective agent, is to use an oil, such as Paratone N, NVH oil, mineral oil or a perfluoropolyether (Hope, 1988
; Riboldi-Tunnicliffe & Hilgenfeld, 1999
). This can be employed to eliminate bulk water on the outside of the crystal without affecting the composition of the internal cryosolution. In either case it seems to be helpful to remove as much of the external solution as possible prior to transferring to the cold stream.
In some cases involving very fragile crystals a relatively large volume of cryosolution is needed to support the crystal. Although no studies have been reported, in these cases some consideration may need to be given to the forces exerted on the crystal from the contracting external cryosolution and it may therefore be helpful to screen a variety of cryosolutions and concentrations, with the idea being to test a range of contractions of the external cryosolution. If the internal cryosolution is chosen correctly then the model above predicts that the external cryosolution should be chosen so that (Δν/νRT) = Δcell.
4.4. Cooling: equilibrating the crystal
Macromolecular crystals show a wide range of robustness to changes in pH, via dialysis can permit equilibration with cryosolutions without exposure to air (Darcy et al., 1996; Fernandez et al., 2000
).
If the ), equilibrate via vapor diffusion (David & Burley, 1991
; Wierenga et al., 1992
) and to adjust the composition of the cryobuffer so the osmotic pressures are identical (David, 1999
). In all cases, an important question to consider is the time necessary for full equilibration with the cryosolution.
Diffusion times for small molecules through protein crystals have been measured in several different cases. For example, diffusion of glycerol into the active sites in galectin-3 crystals was recently determined to take less than 1 min (Collins et al., 2007), while pyrenesulfonate took about 10 h to diffuse through lysozyme crystals (Velev et al., 2000
). Recently, the experiments measuring diffusion of small molecules through protein crystals were nicely summarized and simulated using a diffusion model that accounts for the protein crystal geometry (Geremia et al., 2006
).
The diffusion times depend on the size of the cryoprotective molecule, the solvent content of the crystal and the size of the solvent channels. Using software made available in the public domain by Geremia and coworkers, we calculated the times needed for crystals of thermolysin to equilibrate with cryosolutions of ethanol and sucrose (among the smallest and largest of the penetrating cryoprotective agents from Table 1; Geremia et al., 2006
). These crystals require penetrating cryoprotective agents for successful cooling, are about 50%(v/v) solvent and have tube-shaped channels that are ∼20 Å in diameter. The calculated times varied from approximately 10 s to 10 min and are summarized in Table 3
.
|
This suggests that with some crystal/cryoprotective agent combinations soaking times will need to be several minutes or longer for full equilibration. If shorter soaks are initially tried without success, it may be helpful to increase the soaking time. On the other hand, equilibration with the external cryosolution requires no diffusion through the solvent channels and can be accomplished in less than a few seconds.
4.5. Other considerations
Here, we have mainly discussed the thermal contraction of the cryosolution. More precisely, we have considered the average
over the temperature range ∼294→∼100 K. Ideally, one would consider the continuous
curve,and try to design a cryosolution such that over the whole temperature range the thermal expansions of the cryosolvent and the solvent channel are identical, or βCS(T) = βCH(T). Additionally, we have not considered some physical characteristics of the cryosolution that may have an effect on the outcome, including the compressibility, viscosity and A highly compressible liquid with low viscosity will give the cryosolution the ability to respond to changes in the crystal packing as the crystal is cooled by compressing or flowing into or out of solvent reservoirs either within the crystal or external to it. This might allow for successful cooling even when βCS(T) and βCH(T) are not identical over the whole temperature range. These may be useful properties of the cryosolution to consider in the future and could, for example, form the basis of cryosolution cocktails that combine multiple cryoprotective agents to provide optimal contraction and flow properties.
5. Summary and conclusions
Cryocooling is a necessary step for most macromolecular crystallography projects. Progress has been made over the last few years to make cryoprotection more predictable. We have described measurements of the thermal contraction of a range of cryosolutions, which provide new information for researchers to utilize in designing cryocooling procedures. These contraction measurements have led us to propose a method for choosing the optimal cryosolution that is based on simple measurements of the crystal diffraction at room temperature and low temperature. Recent work also suggests that the required soaking times for cryosolution equilibration will depend on the crystal. Together, these advances hold the potential to improve predictive possibilities in cryoprotective agent selection and protocol design in macromolecular crystallography.
Footnotes
‡Current address: American Red Cross, 3131 North Vancouver Avenue, Portland, OR 97227, USA.
Acknowledgements
We would like to thank many people at the Diffraction Methods in Structural Biology Gordon Conference 2008 for helpful discussion, as well as Larry North for technical assistance.
References
Berejnov, V., Husseini, N. S., Alsaied, O. A. & Thorne, R. E. (2006). J. Appl. Cryst. 39, 244–251. Web of Science CrossRef CAS IUCr Journals Google Scholar
Berman, H. M., Westbrook, J., Feng, Z., Gilliland, G. L., Bhat, T. N., Weissig, H., Shindyalov, I. N. & Bourne, P. E. (2000). Nucleic Acids Res. 28, 235–242. Web of Science CrossRef PubMed CAS Google Scholar
Childs, P. R. N. (2001). Practical Temperature Measurement, 1st ed. Oxford: Butterworth–Heinemann. Google Scholar
Chinte, U., Shah, B., DeWitt, K., Kirschbaum, K., Pinkerton, A. A. & Schall, C. (2005). J. Appl. Cryst. 38, 412–419. Web of Science CrossRef CAS IUCr Journals Google Scholar
Collins, P. M., Hidari, K. I. P. J. & Blanchard, H. (2007). Acta Cryst. D63, 415–419. Web of Science CrossRef IUCr Journals Google Scholar
Darcy, A., Elmore, C., Stihle, M. & Johnston, J. E. (1996). J. Cryst. Growth, 168, 175–180. CAS Google Scholar
David, P. R. (1999). Practical Protein Crystallography, edited by D. E. McRee, pp. 410–441. New York: Academic Press. Google Scholar
David, P. R. & Burley, S. K. (1991). J. Appl. Cryst. 24, 1073–1074. CrossRef CAS Web of Science IUCr Journals Google Scholar
Dewan, J. C. & Tilton, R. F. (1987). J. Appl. Cryst. 20, 130–132. CrossRef CAS Web of Science IUCr Journals Google Scholar
Dewar, J. (1902). Proc. R. Soc. Lond. 70, 237–247. CrossRef Google Scholar
Dobrianov, I., Caylor, C., Lemay, S. G., Finkelstein, K. D. & Thorne, R. E. (1999). J. Cryst. Growth, 196, 511–523. Web of Science CrossRef CAS Google Scholar
Fernandez, E. J., Joachimiak, A. & Lolis, E. (2000). J. Appl. Cryst. 33, 168–171. Web of Science CrossRef CAS IUCr Journals Google Scholar
Frauenfelder, H., Hartmann, H., Karplus, M., Kuntz, I. D. Jr, Kuriyan, J., Parak, F., Petsko, G. A., Ringe, D., Tilton, R. F. Jr, Connolly, M. L. & Max, N. (1987). Biochemistry, 26, 254–261. CrossRef CAS PubMed Web of Science Google Scholar
Garman, E. (1999). Acta Cryst. D55, 1641–1653. Web of Science CrossRef CAS IUCr Journals Google Scholar
Garman, E. (2003). Curr. Opin. Struct. Biol. 13, 545–551. Web of Science CrossRef PubMed CAS Google Scholar
Garman, E. F. & Doublié, S. (2003). Methods Enzymol. 368, 188–216. Web of Science CrossRef PubMed CAS Google Scholar
Garman, E. F. & Mitchell, E. P. (1996). J. Appl. Cryst. 29, 584–587. CrossRef CAS Web of Science IUCr Journals Google Scholar
Garman, E. F. & Owen, R. L. (2006). Acta Cryst. D62, 32–47. Web of Science CrossRef CAS IUCr Journals Google Scholar
Garman, E. F. & Schneider, T. R. (1997). J. Appl. Cryst. 30, 211–237. CrossRef Web of Science IUCr Journals Google Scholar
Geremia, S., Campagnolo, M., Demitri, N. & Johnson, L. N. (2006). Structure, 14, 393–400. Web of Science CrossRef PubMed CAS Google Scholar
Haas, D. J. & Rossmann, M. G. (1970). Acta Cryst. B26, 998–1004. CrossRef CAS IUCr Journals Web of Science Google Scholar
Henderson, R. (1990). Proc. R. Soc. Lond. B, 241, 6–8. CrossRef CAS Web of Science Google Scholar
Hope, H. (1988). Acta Cryst. B44, 22–26. CrossRef CAS Web of Science IUCr Journals Google Scholar
Jenner, M. J., Wright, J. P., Margiolaki, I. & Fitch, A. N. (2007). J. Appl. Cryst. 40, 121–124. Web of Science CrossRef CAS IUCr Journals Google Scholar
Juers, D. H., Lovelace, J., Bellamy, H. D., Snell, E. H., Matthews, B. W. & Borgstahl, G. E. O. (2007). Acta Cryst. D63, 1139–1153. Web of Science CrossRef CAS IUCr Journals Google Scholar
Juers, D. H. & Matthews, B. W. (2001). J. Mol. Biol. 311, 851–862. Web of Science CrossRef PubMed CAS Google Scholar
Juers, D. H. & Matthews, B. W. (2004a). Acta Cryst. D60, 412–421. Web of Science CrossRef CAS IUCr Journals Google Scholar
Juers, D. H. & Matthews, B. W. (2004b). Q. Rev. Biophys. 37, 105–119. Web of Science CrossRef PubMed CAS Google Scholar
Kalinin, Y., Kmetko, J., Bartnik, A., Stewart, A., Gillilan, R., Lobkovsky, E. & Thorne, R. (2005). J. Appl. Cryst. 38, 333–339. Web of Science CrossRef CAS IUCr Journals Google Scholar
Kantardjieff, K. A. & Rupp, B. (2003). Protein Sci. 12, 1865–1871. Web of Science CrossRef PubMed CAS Google Scholar
Kauzmann, W. (1948). Chem. Rev. 43, 219–256. CrossRef CAS Web of Science Google Scholar
Kriminski, S., Caylor, C. L., Nonato, M. C., Finkelstein, K. D. & Thorne, R. E. (2002). Acta Cryst. D58, 459–471. Web of Science CrossRef CAS IUCr Journals Google Scholar
Kriminski, S., Kazmierczak, M. & Thorne, R. E. (2003). Acta Cryst. D59, 697–708. Web of Science CrossRef CAS IUCr Journals Google Scholar
Kwong, P. D. & Liu, Y. (1999). J. Appl. Cryst. 32, 102–105. Web of Science CrossRef CAS IUCr Journals Google Scholar
Lide, D. R. (2004). Editor. Handbook of Chemistry and Physics. Boca Raton: CRC Press. Google Scholar
Lovelace, J. J., Murphy, C. R., Pahl, R., Brister, K. & Borgstahl, G. E. O. (2006). J. Appl. Cryst. 39, 425–432. Web of Science CrossRef CAS IUCr Journals Google Scholar
Lovelace, J. J., Soares, A. S., Bellamy, H. D., Sweet, R. M., Snell, E. H. & Borgstahl, G. E. O. (2004). J. Appl. Cryst. 37, 481–485. Web of Science CrossRef CAS IUCr Journals Google Scholar
Low, B. W., Chen, C. C. H., Berger, J. E., Singman, L. & Pletcher, J. F. (1966). Proc. Natl Acad. Sci. USA, 56, 1746–1750. CrossRef PubMed CAS Web of Science Google Scholar
Mac Sweeney, A. & D'Arcy, A. (2003). J. Appl. Cryst. 36, 165–166. Web of Science CrossRef CAS IUCr Journals Google Scholar
Matthews, B. W. (1968). J. Mol. Biol. 33, 491–497. CrossRef CAS PubMed Web of Science Google Scholar
McFerrin, M. B. & Snell, E. H. (2002). J. Appl. Cryst. 35, 538–545. Web of Science CrossRef CAS IUCr Journals Google Scholar
Mitchell, E. P. & Garman, E. F. (1994). J. Appl. Cryst. 27, 1070–1074. CrossRef CAS IUCr Journals Google Scholar
Nave, C. (1998). Acta Cryst. D54, 848–853. Web of Science CrossRef CAS IUCr Journals Google Scholar
Phillips, G. N. (1985). Methods Enzymol. 114, 128–131. CrossRef PubMed Google Scholar
Rabin, Y., Taylor, M. J. & Wolmark, N. (1998). J. Biomech. Eng. 120, 259–266. Web of Science CrossRef PubMed CAS Google Scholar
Riboldi-Tunnicliffe, A. & Hilgenfeld, R. (1999). J. Appl. Cryst. 32, 1003–1005. Web of Science CrossRef CAS IUCr Journals Google Scholar
Rodgers, D. W. (1994). Structure, 2, 1135–1140. CrossRef CAS PubMed Web of Science Google Scholar
Röttger, K., Endriss, A., Ihringer, J., Doyle, S. & Kuhs, W. F. (1994). Acta Cryst. B50, 644–648. CSD CrossRef Web of Science IUCr Journals Google Scholar
Schneider, T. R. (1997). Acta Phys. Pol. A, 91, 739–744. CAS Google Scholar
Skrzypczak-Jankun, E., Bianchet, M. A., Mario Amzel, L. & Funk, M. O. (1996). Acta Cryst. D52, 959–965. CrossRef CAS Web of Science IUCr Journals Google Scholar
Snell, E. H., Judge, R. A., Larson, M. & van der Woerd, M. J. (2002). J. Synchrotron Rad. 9, 361–367. Web of Science CrossRef CAS IUCr Journals Google Scholar
Vahedi-Faridi, A., Lovelace, J., Bellamy, H. D., Snell, E. H. & Borgstahl, G. E. O. (2003). Acta Cryst. D59, 2169–2182. Web of Science CrossRef CAS IUCr Journals Google Scholar
Vahedi-Faridi, A., Stojanoff, V. & Yeh, J. I. (2005). Acta Cryst. D61, 982–989. Web of Science CrossRef CAS IUCr Journals Google Scholar
Velev, O. D., Kaler, E. W. & Lenhoff, A. M. (2000). J. Phys. Chem. B, 104, 9267–9275. Web of Science CrossRef CAS Google Scholar
Weik, M., Kryger, G., Schreurs, A. M. M., Bouma, B., Silman, I., Sussman, J. L., Gros, P. & Kroon, J. (2001). Acta Cryst. D57, 566–573. Web of Science CrossRef CAS IUCr Journals Google Scholar
Weik, M., Schreurs, A. M. M., Leiros, H.-K. S., Zaccai, G., Ravelli, R. B. G. & Gros, P. (2005). J. Synchrotron Rad. 12, 310–317. Web of Science CrossRef CAS IUCr Journals Google Scholar
Wierenga, R. K., Zeelan, J. P. & Noble, M. E. (1992). J. Cryst. Growth, 122, 231–234. CrossRef CAS Web of Science Google Scholar
Yao, M., Yasutake, Y. & Tanaka, I. (2004). Acta Cryst. D60, 39–45. Web of Science CrossRef CAS IUCr Journals Google Scholar
Yaws, C. L. (1999). Editor. Chemical Properties Handbook. New York: McGraw–Hill. Google Scholar
Younglove, B. A. (1982). J. Phys. Chem. Ref. Data, 11, 1-4–1-351. Google Scholar
Zhang, X.-J. & Matthews, B. W. (1995). J. Appl. Cryst. 28, 624–630. CrossRef CAS Web of Science IUCr Journals Google Scholar
This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.