research papers\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoSTRUCTURAL
BIOLOGY
ISSN: 2059-7983

Structure and function of a glycoside hydrolase family 8 endoxylanase from Teredinibacter turnerae

CROSSMARK_Color_square_no_text.svg

aYork Structural Biology Laboratory, Department of Chemistry, The University of York, York YO10 5DD, England, bSchool of Molecular and Cellular Biology, The Faculty of Biological Sciences, University of Leeds, Leeds LS2 9JT, England, cSchool of Natural and Environmental Science, Newcastle University, Newcastle upon Tyne NE1 7RU, England, dInstitute for Cell and Molecular Biosciences, Newcastle University, Newcastle upon Tyne NE2 4HH, England, and eDepartment of Chemistry, The University of York, York YO10 5DD, England
*Correspondence e-mail: gideon.davies@york.ac.uk

Edited by C. S. Bond, University of Western Australia, Crawley, Australia (Received 20 March 2018; accepted 9 July 2018; online 2 October 2018)

The biological conversion of lignocellulosic matter into high-value chemicals or biofuels is of increasing industrial importance as the sector slowly transitions away from nonrenewable sources. Many industrial processes involve the use of cellulolytic enzyme cocktails – a selection of glycoside hydrolases and, increasingly, polysaccharide oxygenases – to break down recalcitrant plant polysaccharides. ORFs from the genome of Teredinibacter turnerae, a symbiont hosted within the gills of marine shipworms, were identified in order to search for enzymes with desirable traits. Here, a putative T. turnerae glycoside hydrolase from family 8, hereafter referred to as TtGH8, is analysed. The enzyme is shown to be active against β-1,4-xylan and mixed-linkage (β-1,3,β-1,4) marine xylan. Kinetic parameters, obtained using high-performance anion-exchange chromatography with pulsed amperometric detection and 3,5-dinitrosalicyclic acid reducing-sugar assays, show that TtGH8 catalyses the hydrolysis of β-1,4-xylohexaose with a kcat/Km of 7.5 × 107M−1 min−1 but displays maximal activity against mixed-linkage polymeric xylans, hinting at a primary role in the degradation of marine polysaccharides. The three-dimensional structure of TtGH8 was solved in uncomplexed and xylobiose-, xylotriose- and xylohexaose-bound forms at approximately 1.5 Å resolution; the latter was consistent with the greater kcat/Km for hexasaccharide substrates. A 2,5B boat conformation observed in the −1 position of bound xylotriose is consistent with the proposed conformational itinerary for this class of enzyme. This work shows TtGH8 to be effective at the degradation of xylan-based substrates, notably marine xylan, further exemplifying the potential of T. turnerae for effective and diverse biomass degradation.

1. Introduction

The demand for biofuels is increasing amid positive shifts in political and public opinion regarding the growing need for more sustainable fuel sources (discussed, for example, in Somerville, 2007[Somerville, C. (2007). Curr. Biol. 17, R115-R119.]; Pauly & Keegstra, 2008[Pauly, M. & Keegstra, K. (2008). Plant J. 54, 559-568.]). A barrier towards the sustainable and efficient usage of plant biomass for fuel conversion lies in the complexity and recalcitrance of plant cell walls (Himmel et al., 2007[Himmel, M. E., Ding, S.-Y., Johnson, D. K., Adney, W. S., Nimlos, M. R., Brady, J. W. & Foust, T. D. (2007). Science, 315, 804-807.]; Bomble et al., 2017[Bomble, Y. J., Lin, C.-Y., Amore, A., Wei, H., Holwerda, E. K., Ciesielski, P. N., Donohoe, B. S., Decker, S. R., Lynd, L. R. & Himmel, M. E. (2017). Curr. Opin. Chem. Biol. 41, 61-70.]). The heterogeneous matrix of various carbohydrate compounds hinders the enzymatic breakdown of plant cell walls into energy-rich carbohydrate monomers. Crystalline cellulose regions are interspersed with a web of more soluble polysaccharides, known as hemicelluloses. The plant cell-wall matrix is strengthened by a hydrophobic and insoluble barrier: a mixture of phenolic compounds known as lignin (Li et al., 2015[Li, C., Zhao, X., Wang, A., Huber, G. W. & Zhang, T. (2015). Chem. Rev. 115, 11559-11624.]). In nature, the breakdown of lignocellulosic material is achieved through the synergistic action of a wide variety of different enzymes, including glycoside hydrolases and polysaccharide oxygenases (Hemsworth et al., 2015[Hemsworth, G. R., Johnston, E. M., Davies, G. J. & Walton, P. H. (2015). Trends Biotechnol. 33, 747-761.]; Walton & Davies, 2016[Walton, P. H. & Davies, G. J. (2016). Curr. Opin. Chem. Biol. 31, 195-207.]). A single organism can produce a consortium of enzymes capable of lignocellulosic degradation or can utilize the symbiotic behaviour of other smaller organisms such as bacteria and fungi (Cragg et al., 2015[Cragg, S. M., Beckham, G. T., Bruce, N. C., Bugg, T. D. H., Distel, D. L., Dupree, P., Etxabe, A. G., Goodell, B. S., Jellison, J., McGeehan, J. E., McQueen-Mason, S. J., Schnorr, K., Walton, P. H., Watts, J. E. M. & Zimmer, M. (2015). Curr. Opin. Chem. Biol. 29, 108-119.]). One organism of increasing interest is the marine symbiont Teredinibacter turnerae, which has been found in the gills (Fig. 1[link]) of at least 24 species of bivalve molluscs (Ekborg et al., 2007[Ekborg, N. A., Morrill, W., Burgoyne, A. M., Li, L. & Distel, D. L. (2007). Appl. Environ. Microbiol. 73, 7785-7788.]; Horak & Montoya, 2014[Horak, R. E. A. & Montoya, J. P. (2014). J. Mar. Biol. Assoc. UK, 94, 177-185.]).

[Figure 1]
Figure 1
Basic diagram of a shipworm (image not to scale) showing the general layout of the main organs within the animal. More information on shipworm physiology can be found in Betcher (2011[Betcher, M. A. (2011). Thesis. Oregon Health and Science University, Portland, Oregon, USA.]), Gallager et al. (1981[Gallager, S. M., Turner, R. D. & Berg, C. J. (1981). J. Exp. Mar. Biol. Ecol. 52, 63-77.]) and Waterbury et al. (1983[Waterbury, J. B., Calloway, C. B. & Turner, R. D. (1983). Science, 221, 1401-1403.]), and in-depth illustrations and descriptions can be found in Turner (1966[Turner, R. D. (1966). A Survey and Illustrated Catalogue of the Teredinidae (Mollusca: Bivalvia). Cambridge: The Museum of Comparative Biology.]).

Marine bivalve molluscs of the family Teredinidae, more commonly referred to as shipworms (Fig. 1[link]), are considered pests by the maritime community as they inflict damage onto wooden structures such as piers and ship hulls by burrowing into the material (Cragg et al., 2015[Cragg, S. M., Beckham, G. T., Bruce, N. C., Bugg, T. D. H., Distel, D. L., Dupree, P., Etxabe, A. G., Goodell, B. S., Jellison, J., McGeehan, J. E., McQueen-Mason, S. J., Schnorr, K., Walton, P. H., Watts, J. E. M. & Zimmer, M. (2015). Curr. Opin. Chem. Biol. 29, 108-119.]). In 1927, Boynton and Miller observed the disappearance of 80% of cellulose and 15–56% of hemicellulose from Douglas fir piling during its transit through the digestive tract of Teredo navalis (Boynton & Miller, 1927[Boynton, L. C. & Miller, R. C. (1927). J. Biol. Chem. 75, 613-618.]), highlighting the ability of these organisms to degrade recalcitrant plant biomass. Much later, in 1983, Waterbury and coworkers observed, isolated and cultured the symbiotic bacterium T. turnerae (Waterbury et al., 1983[Waterbury, J. B., Calloway, C. B. & Turner, R. D. (1983). Science, 221, 1401-1403.]) from specialized cells called bacteriocytes found inside an internal region of the shipworm's gills. In its genome, T. turnerae encodes >100 glycoside hydrolases, enzymes that are capable of breaking glycosidic bonds, 54% of which have been classed as `wood-specific' (Yang et al., 2009[Yang, J. C. et al. (2009). PLoS One, 4, e6085.]). Furthermore, T. turnerae enzymes have been identified in the shipworm gut (O'Connor et al., 2014[O'Connor, R. M. et al. (2014). Proc. Natl Acad. Sci. USA, 111, E5096-E5104.]), thus establishing the resident bacteria and the enzymes that they produce as key players in shipworm biology. It is therefore now clear that lignocellulose degradation may occur through the synergistic action of host enzymes and enzymes from this community of endosymbiotic bacteria housed within the gills of the shipworm.

In this light, we sought to mine the uncharacterized T. turnerae glycoside hydrolases to find enzymes that would be active under more biotechnologically relevant conditions and on useful substrates. T. turnerae exists primarily in high-salt conditions, and so its enzymes may be additionally stabilized towards harsher environments such as might be experienced in a biorefinery. As a proof of principle, we chose to focus on the consortia of enzymes harnessed by this organism to degrade xylans, given the interest in this substrate in the context of biofuels (Somerville, 2007[Somerville, C. (2007). Curr. Biol. 17, R115-R119.]; Pauly & Keegstra, 2008[Pauly, M. & Keegstra, K. (2008). Plant J. 54, 559-568.]; Biely et al., 2016[Biely, P., Singh, S. & Puchart, V. (2016). Biotechnol. Adv. 34, 1260-1274.]), and also in the pulp and paper, animal feed and bread-making sectors. Additionally, following the recent insights gained from studying xylan-degrading enzyme consortia from new ecological niches (Rogowski et al., 2015[Rogowski, A. et al. (2015). Nature Commun. 6, 7481.]), work that revealed both new enzymes and specificities, the study of xylan-degrading enzymes from this shipworm symbiont represents fertile new ground for further discoveries in this area.

Applying the CAZY classification for carbohydrate-active enzymes (https://www.cazy.org; see Lombard et al., 2014[Lombard, V., Golaconda Ramulu, H., Drula, E., Coutinho, P. M. & Henrissat, B. (2014). Nucleic Acids Res. 42, D490-D495.]) to the T. turnerae genome reveals many potential xylanases, including ten GH10 enzymes, five GH11 enzymes and two enzymes from the potential xylanase-containing family GH30 (all of these glycoside hydrolase families are reviewed in CAZypedia; for a review, see The CAZypedia Consortium, 2018[The CAZypedia Consortium (2018). Glycobiology, 28, 3-8.]). We were particularly drawn to family GH8, a cellulase/xylanase-containing family, from which T. turnerae has just a single representative, TtGH8. We sought to use this enzyme as an exemplar for whether T. turnerae can provide enzymes with biological and chemical utility, cast in terms of three-dimensional structure and notably, in this case, in the context of a diverse array of other potential xylanolytic enzymes.

Here, we report the cloning, expression and characterization of this GH8 carbohydrate-active enzyme (Lombard et al., 2014[Lombard, V., Golaconda Ramulu, H., Drula, E., Coutinho, P. M. & Henrissat, B. (2014). Nucleic Acids Res. 42, D490-D495.]). We show that TtGH8 is a xylan-active endoxylanase with six catalytically relevant subsites and notably a maximal activity towards mixed-linkage (β-1,3,β-1,4) marine xylan. The three-dimensional structure of TtGH8, determined to 1.5 Å resolution, reveals intimate details of the substrate-binding sites and the distortions of xylose within the catalytic centre. The work thus highlights the potential of the T. turnerae genome for enzyme discovery and adds to the growing toolbox of enzymes that may be used to tackle the recalcitrant hemicellulose xylan (Biely et al., 2016[Biely, P., Singh, S. & Puchart, V. (2016). Biotechnol. Adv. 34, 1260-1274.]).

2. Materials and methods

2.1. Purification of TtGH8 and catalytic mutants

The sequence of TtGH8 (TERTU_4506; UniProt C5BJ89) was analysed, and the catalytic domain was identified (Supplementary Table S1) and truncated to remove the original signal peptide and linker region and to include an N-terminal hexahistadine tag and 3C protease cleavage site. The sequence was codon-optimized and synthesized for expression in Escherichia coli by GenScript (New Jersey, USA) and the plasmid was transformed into E. coli BL21 competent cells (Supplementary Table S2). Catalytic residues were identified using the literature and structures of similar GH8 proteins deposited in the PDB. The mutations were designed using custom primers and implemented using the Q5 site-directed mutagenesis kit (NEB) to alter Asp281 to Asn (TtGH8 D281N; Supplementary Table S3). Expression testing for both constructs was carried out prior to large-scale production. Cultures (6 × 500 ml LB, 30 mg ml−1 kanamycin) were inoculated with 500 µl overnight culture and grown at 37°C and 200 rev min−1 until an OD of 0.6 was obtained. IPTG (1 mM final concentration) was then added and the cultures were cooled to 16°C and left shaking overnight. The cultures were harvested by centrifugation and the pellet was resuspended in 50 mM HEPES, 250 mM NaCl, 30 mM imidazole pH 7. The cells were lysed by sonication and centrifuged at 15g for 30 min. The supernatant was collected and loaded onto a pre-equilibrated Nickel HiTrap Crude 5 ml affinity column. Nickel-affinity chromatography was run on an ÄKTA start, with an elution gradient of 30–300 mM imidazole over 25 column volumes. The collected protein sample was treated with a 1:100 ratio of 3C protease to TtGH8 and 5 mM DTT and left shaking at room temperature overnight. The sample was loaded onto a pre-equilibrated Nickel HiTrap Crude 5 ml affinity column and the flowthrough and wash were collected. The collected sample was buffer-exchanged into 20 mM HEPES, 200 mM NaCl before being concentrated to approximately 300 µl and loaded onto a Superdex 200 gel-filtration column. Pure fractions were combined, concentrated and buffer-exchanged into 10 mM HEPES. To check their purity, samples were analysed by SDS–PAGE throughout purification and the final sample was analysed by electrospray ionization mass spectrometry.

2.2. Thermal shift analysis (TSA)

Samples (30 µl total) containing SYPRO Orange dye (15 µl) and enzyme (final concentration of 1 mg ml−1) with either buffer or substrate were prepared and thermal shift analyses were run on a Stratagene Mx3005P qPCR device. The substrates tested included the solid substrates (small amount, unmeasured) tamarind xyloglucan, rye arabinoxylan, birchwood xylan, shrimp shell chitin and Avicel, and the soluble oligosaccharides cellohexaose, cellobiose, xylobiose and xylohexaose (10 mM). Samples were heated from 20 to 91°C in increments of 1°C over 71 cycles. The fluorescence of SYPRO Orange was monitored throughout and the data were used to calculate the melting temperature of the protein (Supplementary Fig. S1). The data were analysed using the JTSA fitting program developed by Paul Bond, which is available at https://paulsbond.co.uk/jtsa/#/input.

2.3. Thin-layer chromatography (TLC) and liquid chromatography–mass spectrometry (LCMS)

Xylo-oligosaccharides were purchased commercially: xylobiose (X2) from Sigma and TCP, and xylotriose (X3), xylotetraose (X4), xylopentaose (X5), xylohexaose (X6) and polysaccharides from Megazyme (unless stated otherwise). Overnight hydrolysis reactions with the xylo-oligosaccharides X2–X6 (1 mM), wheat arabinoxylan (WAX), rye arabinoxylan (RAX), corn arabinoxylan (CAX), birchwood xylan (BX), mixed-linkage β1–3,β1–4 xylan (MLX, purchased from Elicityl/Oligotech) and xyloglucan (XG) at 1 mg ml−1 were incubated at 37°C with 1 µM TtGH8. The samples were heated at 90°C prior to spotting onto a TLC plate (total 4 µl). Standards containing X2–X6 at 1 mM each were run on the same plate. TLC plates were placed in chromatography tanks containing the running buffer [50%(v/v) n-butanol, 25%(v/v) acetic acid, 25%(v/v) water]. Plates were run once, dried and then re-run to improve the separation of sugars. The plates were visualized using a staining solution [3%(v/v) sulfuric acid, 75%(v/v) ethanol, 0.1%(w/v) orcinol monohydrate], dried and then heated to approximately 100°C (Fig. 2[link]a). Hydrolysis samples for LCMS were prepared using 50 mM ammonium acetate buffer pH 6, approximately 1 mg ml−1 substrate and 1 µM enzyme. Samples were incubated at 37°C overnight and shaken at 500 rev min−1. If required, samples were centrifuged to remove any solid materials and 100 µl was loaded onto a Cosmosil Sugar-D HPLC column using the LC-MS Dionex system, where the separated products were analysed by ESI or PAD mass spectrometry. Running buffers were a mixture of water and acetronitrile, with some test runs also including 1% formic acid (Supplementary Figs. S2 and S3).

[Figure 2]
Figure 2
(a) TtGH8 activity was explored on a range of substrates using thin-layer chromatography. Hydrolysis activity can be observed on WAX, RAX, BX and MLX, as well as on the oligosaccharides xylotetraose (X4), xylopentaose (X5) and xylohexaose (X6). Activity analysis of TtGH8 on xylohexaose (b), xylopentaose (c) and xylotetraose (d) was carried out with HPAEC-PAD by substrate depletion. The peak areas observed in the HPAEC-PAD traces were normalized against a fucose internal standard and values for ln(S0/St), where S0 is the substrate-peak area at time 0 and St is the substrate-peak area at time t, were plotted against time. Linear regression analysis was used to calculate kcat/Km (in M−1 min−1).

2.4. Kinetics measurements using high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD)

Substrate-depletion kinetics measurements were performed on TtGH8 with xylohexaose, xylopentaose and xylotetraose and were measured using an HPAEC-PAD Dionex system. Hydrolysis reactions were run at 37°C using different substrate and enzyme concentrations, with aliquots removed at set time points and boiled to inactivate TtGH8. All samples were mixed with a fucose internal standard and run on an anion-exchange column (CarboPac) using a sodium acetate gradient. The depletion of substrate during the reaction can be related to kcat/Km through

[kt = \ln\left({{S_{0}}\over{S_{t}}}\right), \eqno (1)]

where k = (kcat/Km)[enzyme], t is time and S0 and St are the substrate-peak areas at time 0 and t, respectively. The substrate-peak areas observed in the HPAEC PAD traces were normalized against both an external and internal fucose standard and the resulting values for ln(S0/St) were plotted against time, producing positive gradients (the change in the substrate-peak area increases from 0, as the substrate-peak area at t = 0 is at its maximum). Linear regression analysis was used to measure the gradient that represents the rate of reaction, and kcat/Km (M−1 min−1) was determined by dividing this gradient by the enzyme concentration (Figs. 2[link]b, 2[link]c and 2[link]d). The use of substrate depletion to obtain kcat/Km has been widely used in the glycoside hydrolase field (see, for example, Pell et al., 2004[Pell, G., Szabo, L., Charnock, S. J., Xie, H., Gloster, T. M., Davies, G. J. & Gilbert, H. J. (2004). J. Biol. Chem. 279, 11777-11788.]; Charnock et al., 1998[Charnock, S. J., Spurway, T. D., Xie, H., Beylot, M. H., Virden, R., Warren, R. A., Hazlewood, G. P. & Gilbert, H. J. (1998). J. Biol. Chem. 273, 32187-32199.]; Matsui et al., 1991[Matsui, I., Ishikawa, K., Matsui, E., Miyairi, S., Fukui, S. & Honda, K. (1991). J. Biochem. 109, 566-569.]).

2.5. Reducing-sugar assay

The activity of TtGH8 towards several polysaccharides was tested using the 3,5-dinitrosalicyclic acid (DNSA) reducing-sugar assay. Hydrolysis reactions with enzyme and substrate were run at 37°C and 150 µl aliquots were removed and immediately mixed in a 1:1 volume ratio with the DNSA agent [comprising 1%(w/v) DNSA, 0.2%(v/v) phenol, 1%(w/v) NaOH, 0.002% glucose and 0.05%(w/v) Na2SO3] at set time points to stop the reaction. The aliquots were heated at 90°C for 20 min and cooled on ice for 10 min. The absorbance of each sample was measured at 575 nm. A standard curve of 0–500 µg ml−1 xylose (plus 1 mg ml−1 polysaccharide substrate) was used to quantify the released reducing sugar. Reaction rates determined for each different substrate-concentration condition were plotted against the substrate concentration, where the gradient divided by the enzyme concentration is kcat/Km (Fig. 3[link]).

[Figure 3]
Figure 3
TtGH8 activity on polysaccharides was determined using the 3,5-dinitrosalicyclic acid (DNSA) reducing-sugar assay. (a) Photograph of the plate containing aliquots representing different reaction time points (0–25 min) and substrate concentrations [mixed-linkage xylan (MLX) and wheat arabinoxylan (WAX) at 0.5–2.0 mg ml−1]. Reaction of the DNSA agent with reducing sugars causes a visible colour change from light yellow to deep brown, with the amount of colour change measured by the absorbance at 510 nm being equivalent to the amount of reducing sugar (chain ends) produced during the enzyme reaction. Standard curves were calculated using the free xylose controls in the top and bottom rows of the plate. These were MLX (1 mg ml−1) + xylose (0–500 µg ml−1) and WAX (1 mg ml−1) + xylose (0–500 µg ml−1). TtGH8 is more active on MLX than on WAX as there is a greater colour change. Absorption measurements taken for each reaction aliquot can be converted into the amount of reducing sugar present using the standard curve [shown in (a)] and plotted against time to give a rate (µM min−1, not shown). The rates for each reaction condition are plotted against the substrate concentration, where the gradient divided by the enzyme concentration is equivalent to kcat/Km. (b) Activity of TtGH8 and TtGH8 catalytic mutant on MLX, (c) activity of TtGH8 on WAX and (d) activity of TtGH8 on BX.

2.6. Crystallization and X-ray crystallography of TtGH8 and mutants

Initial crystallization screening was performed robotically using a Mosquito crystal robot and commercial screens, including Crystal Screen HT and Index from Hampton Research and PACT from Molecular Dimensions. Several crystal hits were obtained for TtGH8 and TtGH8 D281N. A 24-well optimization screen containing 0.1 M sodium acetate pH 4.6–5.2, 0.2 M NaCl, 14–24% polyethylene glycol (PEG) 6000 was used to produce the final crystallization condition for TtGH8: 0.1 M sodium acetate pH 5.0, 0.2 M NaCl, 16% polyethylene glycol. Thin rod-shaped crystals were harvested in nylon loops and cryoprotected by soaking them in mother liquor plus 30%(v/v) ethylene glycol. The TtGH8 crystals containing xylobiose and xylotriose were both soaked for 30 s in a solution consisting of the well solution, 30% ethylene glycol and 150 mM xylobiose/xylotriose. TtGH8 mutant crystals were soaked in 20 mM xylohexose (0.1 M HEPES pH 6.8, 0.2 M ammonium sulfate, 20% PEG 6000) for 15 min to produce a product complex and for 10 s to produce a substrate complex and were dipped in a cryosolution consisting of 30% ethylene glycol before cooling. Crystal data sets were collected on beamlines I02 and I04 at Diamond Light Source.

Data sets were processed using xia2/DIALS (Winter, 2010[Winter, G. (2010). J. Appl. Cryst. 43, 186-190.]; Winter et al., 2018[Winter, G., Waterman, D. G., Parkhurst, J. M., Brewster, A. S., Gildea, R. J., Gerstel, M., Fuentes-Montero, L., Vollmar, M., Michels-Clark, T., Young, I. D., Sauter, N. K. & Evans, G. (2018). Acta Cryst. D74, 85-97.]), with the outer resolution limits defined by CC1/2 > 0.5. Molecular replacement (Phaser; McCoy et al., 2007[McCoy, A. J., Grosse-Kunstleve, R. W., Adams, P. D., Winn, M. D., Storoni, L. C. & Read, R. J. (2007). J. Appl. Cryst. 40, 658-674.]) and refinement (REFMAC; Murshudov et al., 2011[Murshudov, G. N., Skubák, P., Lebedev, A. A., Pannu, N. S., Steiner, R. A., Nicholls, R. A., Winn, M. D., Long, F. & Vagin, A. A. (2011). Acta Cryst. D67, 355-367.]) were carried out using the CCP4i2 pipeline (Potterton et al., 2018[Potterton, L. et al. (2018). Acta Cryst. D74, 68-84.]). The TtGH8 structure was solved by molecular replace­ment using the CCP4 implementation of MOLREP (Vagin & Teplyakov, 2010[Vagin, A. & Teplyakov, A. (2010). Acta Cryst. D66, 22-25.]) and default parameters with the protein atoms only of PDB entry 1wu4, the GH8 reducing-end-xylose releasing exo-oligo­xylanase from Bacillus halodurans C-125 (Fushinobu et al., 2005[Fushinobu, S., Hidaka, M., Honda, Y., Wakagi, T., Shoun, H. & Kitaoka, M. (2005). J. Biol. Chem. 280, 17180-17186.]). Manual manipulation in Coot (Emsley et al., 2010[Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. (2010). Acta Cryst. D66, 486-501.]) followed by refinement using REFMAC was cycled several times to a give a final R factor and Rfree of 0.15 and 0.17, respectively. Protein–ligand complex structures were solved by molecular replacement using the CCP4 implementation of MOLREP (Vagin & Teplyakov, 2010[Vagin, A. & Teplyakov, A. (2010). Acta Cryst. D66, 22-25.]) with the unliganded TtGH8 enzyme structure as the search model. Ligands were modelled using JLigand (Lebedev et al., 2012[Lebedev, A. A., Young, P., Isupov, M. N., Moroz, O. V., Vagin, A. A. & Murshudov, G. N. (2012). Acta Cryst. D68, 431-440.]). Structural analysis and figure preparation was carried out in CCP4mg (McNicholas et al., 2011[McNicholas, S., Potterton, E., Wilson, K. S. & Noble, M. E. M. (2011). Acta Cryst. D67, 386-394.]).

3. Results

3.1. Catalytic activity of TtGH8

T. turnerae possesses a wide variety of glycoside hydrolases spanning many different families and potential substrate specificities. Given its possible relevance to xylan degradation and perhaps even marine colonization of wood, DNA encoding the predicted catalytic domain (residues 41–436; Supplementary Table S1) of the GH8 enzyme of the bacterium (TtGH8; locus tag TERTU_4506) was cloned into an E. coli expression vector. The gene sequence was codon-optimized by GenScript (DNA sequence given in Supplementary Table S2) and designed with a 3C protease-removable N-terminal hexahistidine tag. E. coli containing the recombinant plasmid produced high levels of soluble TtGH8, which was purified using nickel-affinity chromatography and gel-filtration chromatography. The identity of pure TtGH8, as judged by SDS–PAGE, was confirmed by electrospray ionization mass spectrometry (ESI-MS, data not shown).

Initial screening for likely binding ligands/substrates was performed using thermal shift analysis and a panel of oligo/polysaccharides (xyloglucan, rye arabinoxylan, birchwood xylan, shrimp shell chitin, Avicel, cellohexaose, cellobiose, xylobiose and xylohexaose). Significant increases in melting temperature were only observed in conditions containing xylan or xylohexaose, which resulted in a 2.1°C (apo 55.2°C, with xylan 57.3°C) and 2.9°C (apo 57.2°C, with xylohexaose 60.1°C) increase in melting temperature, respectively (Supplementary Fig. S1).

Given the known specificities of family GH8 members (available at https://www.cazy.org/GH8.html), chitosanase (EC 3.2.1.132), cellulase (EC 3.2.1.4), licheninase (EC 3.2.1.73), endo-1,4-β-xylanase (EC 3.2.1.8) and reducing-end xylose-releasing exo-oligoxylanase (EC 3.2.1.156), the increase in melting temperature for TtGH8 suggested activity as a xylan­ase. TtGH8 was therefore incubated (18 h) with a variety of potential substrates and the reaction products were monitored by thin-layer chromatography (Fig. 2[link]a). TtGH8 was tested against wheat arabinoxylan (WAX), rye arabinoxylan (RAX), corn arabinoxylan (in the aleurone layer coating the seeds known as the bran fraction; CAX), birchwood xylan (BX), mixed-linkage xylan (MLX), xyloglucan (XG) and also β-1,4-linked xylo-oligosaccharides with degrees of polymerization (DP) from 2 to 6. TLC clearly demonstrated that TtGH8 acts as a xylanase, with xylotriose (X3) the predominant product and with activity on WAX, RAX, BX and MLX clearly evident. Xylotetraose (X4) was the minimal length xylooligosaccharide that could act as a substrate for TtGH8 observable by TLC. The TLC results were confirmed using liquid chromatography linked to mass spectrometry (Supplementary Fig. S2). TtGH8 was observed to cleave X6 into X3, X5 into X3 and X2, and X4 into X3 (X1 could not be observed). Analysis of the soluble products removed by centrifugation after incubation of the protein with birchwood xylan (1 mg ml−1, 37°C, 18 h) indeed confirmed X3 as the dominant product (Supplementary Fig. S3).

With the knowledge that TtGH8 acts as a xylanase, we next sought to determine the kinetic parameters for the action of TtGH8 both by substrate-depletion analysis using high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and by reducing-sugar assays with 3,5-dinitrosalicyclic acid (DNSA). HPAEC-PAD analysis (Figs. 2[link]b and 2[link]c) yielded a maximal activity, kcat/Km, of 7.5 × 107M−1 min−1 for X6, with X5 and X4 being considerably worse substrates, with kcat/Km values some five and 123 times lower, respectively (Table 1[link]). Such values are typical for endo-xylanases, falling as they do between the kcat/Km values reported for GH10 enzymes such as CjXyn10A and CyXyn10C (Pell et al., 2004[Pell, G., Szabo, L., Charnock, S. J., Xie, H., Gloster, T. M., Davies, G. J. & Gilbert, H. J. (2004). J. Biol. Chem. 279, 11777-11788.]). TtGH8 activity against xylose-based polysaccharides was determined using the DNSA reducing-sugar assay (Fig. 3[link]a). Enzyme activity was monitored over time at five different substrate concentrations, allowing the determination of kcat/Km (Figs. 3[link]b, 3[link]c and 3[link]d). An apparent preference for MLX was observed (1.6 × 108 mg−1 ml min−1; Table 1[link]).

Table 1
Catalytic activities of TtGH8 on xylan substrates as determined by HPAEC-PAD (oligosaccharides) or DNSA reducing-sugar assay (polysaccharides)

Substrate kcat/Km
Oligosaccharides
 Xylohexaose 7.5 × 107 ± 1.1 × 106
 Xylopentaose 1.4 × 107 ± 1.4 × 106
 Xylotetraose 6.1 × 105 ± 3.1 × 104
Polysaccharides
 BX 1.8 × 107 ± 4 × 106
 WAX 6.3 × 106 ± 5 × 105
 MLX (wild type) 1.6 × 108 ± 4 × 106
 MLX (Asp281Asn) 1.8 × 104 ± 1 × 103
†Values for oligosaccharides are given in M−1 min−1 and those for polysaccharides are given in mg−1 ml min−1.

3.2. Three-dimensional structure of TtGH8

In order to provide molecular insight into its catalytic properties, as described above, the three-dimensional structure of TtGH8 was determined. TtGH8 was initially crystallized in an apo (unliganded) form and the structure was determined by molecular replacement at a resolution of 1.4 Å (Tables 2[link] and 3[link]), using the protein coordinates only from the structure of the GH8 reducing-end xylose-releasing exo-oligoxylanase from B. halodurans C-125 (PDB entry 1wu4; Fushinobu et al., 2005[Fushinobu, S., Hidaka, M., Honda, Y., Wakagi, T., Shoun, H. & Kitaoka, M. (2005). J. Biol. Chem. 280, 17180-17186.]) as the search model.

Table 2
Data-collection and processing statistics for TtGH8 and the TtGH8 mutant with and without ligands, and the TtGH8 mutant–X6 complex

Values in parentheses are for the outer shell.

  Native TtGH8 TtGH8–X2 TtGH8–X3 TtGH8 mutant–X6
Diffraction source Diamond Light Source Diamond Light Source Diamond Light Source Diamond Light Source
Wavelength (Å) 0.98 0.98 0.98 0.98
Temperature (K) 100 100 100 100
Space group P212121 P212121 P212121 P212121
a, b, c (Å) 61.5, 73.0, 90.9 61.7, 79.0, 87.6 59.7, 80.5, 88.0 62.0, 79.7, 88.0
α, β, γ (°) 90.0, 90.0, 90.0 90.0, 90.0, 90.0 90.0, 90.0, 90.0 90.0, 90.0, 90.0
Resolution range (Å) 51.0–1.40 (1.42–14.0) 50.4–1.40 (1.42–1.40) 59.4–1.80 (1.84–1.80) 60.97–1.80 (1.84–1.80)
Total No. of reflections 342816 530153 316157 313138
No. of unique reflections 80610 84123 40092 40046
Completeness (%) 99.4 (99.9) 99.1 (89.6) 100.0 (100.0) 99.0 (98.0)
Multiplicity 4.3 (4.3) 6.3 (4.1) 7.9 (7.7) 7.8 (8.0)
I/σ(I)〉 9.6 (1.7) 10.1 (1.3) 8.5 (1.6) 8.2 (2.0)
CC1/2 0.997 (0.670) 0.997 (0.503) 0.994 (0.528) 0.992 (0.639)
Rp.i.m. 0.045 (0.414) 0.051 (0.549) 0.080 (0.611) 0.109 (0.970)
Overall B factor from Wilson plot (Å2) 9 9 13 12

Table 3
Structure solution and refinement of TtGH8 and the TtGH8 mutant with and without ligands, and the TtGH8 mutant–X6 complex

Values in parentheses for the outer shell.

  Native TtGH8 TtGH8–X2 TtGH8–X3 TtGH8 mutant–X6
Resolution range (Å) 51.0–1.40 (1.42–1.40) 50.4–1.40 (1.42–1.40) 59.4–1.80 (1.84–1.80) 60.97–1.80 (1.84–1.80)
Completeness (%) 99.4 (99.9) 99.1 (89.6) 100.0 (100.0) 99.0 (98.0)
No. of reflections, working set 80540 84054 40032 39993
No. of reflections, test set 3924 4274 1868 1942
Final Rcryst 0.15 0.16 0.17 0.17
Final Rfree 0.17 0.18 0.20 0.20
Cruickshank DPI 0.052 0.051 0.111 0.116
No. of non-H atoms
 Protein 3163 3145 3125 3136
 Ion 1
 Ligand 25 23 28 61
 Water 310 330 164 194
R.m.s. deviations
 Bonds (Å) 0.017 0.016 0.012 0.012
 Angles (°) 1.70 1.68 1.51 1.50
Average B factors (Å2)
 Protein 14 12 17 16
 Ion 18
 Ligand 28 15 20 26
 Water 27 22 24 22
Ramachandran plot
 Most favoured (%) 98.2 97.5 98.0 97.5
 Allowed (%) 1.8 2.5 2.0 2.5
PDB code 6g00 6g09 6g0b 6g0n

The first three-dimensional structure of a CAZY family GH8 member was that of Clostridium thermocellum CelA (Alzari et al., 1996[Alzari, P. M., Souchon, H. & Dominguez, R. (1996). Structure, 4, 265-275.]). Consistent with the defining family member, TtGH8 exhibits a classical (α/α)6 fold with a clear deep substrate-binding groove (Fig. 4[link]a). PDBeFold (Krissinel & Henrick, 2004[Krissinel, E. & Henrick, K. (2004). Acta Cryst. D60, 2256-2268.]) analysis reveals that TtGH8 shares close structural similarity to the reducing-end xylose-releasing exo-oligoxylanase from B. halodurans C-125 (Fushinobu et al., 2005[Fushinobu, S., Hidaka, M., Honda, Y., Wakagi, T., Shoun, H. & Kitaoka, M. (2005). J. Biol. Chem. 280, 17180-17186.]). TtGH8 shares 43% sequence identity, overlaying 344 Cα atoms with an r.m.s.d. of 1.1 Å, a Q score of 0.7 and a Z score of 15.9. The next closest match is the cold-adapted GH8 xylanase from Pseudoalteromonas haloplanktis (Collins et al., 2005[Collins, T., De Vos, D., Hoyoux, A., Savvides, S. N., Gerday, C., Van Beeumen, J. & Feller, G. (2005). J. Mol. Biol. 354, 425-435.]) with 35% sequence identity, an r.m.s.d. of 1.4 Å over 341 Cα atoms, a Q score of 0.6 and a Z score of 14.7.

[Figure 4]
Figure 4
(a) Apo TtGH8 ribbon structure (coloured from blue to red) with the overall surface transparent, clearly showing the classical (α/α)6 fold. (b) TtGH8–xylotriose complex, showing xylotriose bound in sites −3 to −1, with the corresponding maximum-likelihood-weighted FoFc `difference' electron density, calculated prior to any incorporation of ligands in refinement, at a contour level of 0.35 e Å−3 (approximately 2.5σ). The catalytic residues from the apo form (light blue) and X3 complex (pink) are shown to highlight the position of the scission site and the shift in the catalytic acid (Glu73). The nucleophilic water is shown as a blue sphere, with bonding distances to Asp281 and the catalytic cleavage site (were the substrate longer) depicted. (c) TtGH8 D281N–X6 complex shown as a surface (coloured by electrostatic potential), in which xylohexaose can be observed spanning the deep binding cleft. (d) TtGH8 D281N–X6 complex shown with xylohexaose spanning the six binding positions −3 to +3 with the associated electron density (contour level 0.35 e Å−3; approximately 2.5σ). The catalytic acid and mutated base are shown in light blue. Here, it can be clearly seen that the position normally taken by the nucleophilic water (sitting below and in line with C1) is unavailable owing to the occupation of O2 caused by a ring flip. (e) TtGH8 D281N–X6 complex, showing the nearest neighbours of the X6 ligand (coloured by blending through model); waters are shown in blue, the cryoprotectant ethylene glycol (blue) is shown on the left and hydrogen bonds are depicted by dashed lines. (f) Close-up views of the sugar conformations found in the −1 position of the two TtGH8 complexes, showing the conformations, with C1 and C4 labelled, as 2,5B and 1C4 for xylotriose and xylohexaose, respectively. All images were produced using CCP4mg (McNicholas et al., 2011[McNicholas, S., Potterton, E., Wilson, K. S. & Noble, M. E. M. (2011). Acta Cryst. D67, 386-394.]).

3.3. Mechanism of GH8 endoxylanses

Glycoside hydrolases may act through one of two main mechanisms, leading to retention or inversion of anomeric configuration (reviewed, for example, in Davies & Henrissat, 1995[Davies, G. & Henrissat, B. (1995). Structure, 3, 853-859.]; Henrissat & Davies, 1997[Henrissat, B. & Davies, G. (1997). Curr. Opin. Struct. Biol. 7, 637-644.]; Rye & Withers, 2000[Rye, C. S. & Withers, S. G. (2000). Curr. Opin. Chem. Biol. 4, 573-580.]). CAZY GH8 enzymes act with inversion of anomeric configuration (Fierobe et al., 1993[Fierobe, H. P., Bagnara-Tardif, C., Gaudin, C., Guerlesquin, F., Sauve, P., Belaich, A. & Belaich, J.-P. (1993). Eur. J. Biochem. 217, 557-565.]) and thus feature two essential catalytic residues: a base to activate the water for nucleophilic attack and an acid to protonate the leaving group for departure. Previous studies on GH8 enzymes have identified a conserved glutamic acid found on helix α2 which functions as the catalytic acid in the inverting mechanism (Alzari et al., 1996[Alzari, P. M., Souchon, H. & Dominguez, R. (1996). Structure, 4, 265-275.]). The equivalent in TtGH8 is Glu73. As in many inverting enzyme families, the location of the base is less clear, and it has been proposed that GH8 may, in fact, be subdivided into groupings based upon the location of the catalytic base (Adachi et al., 2004[Adachi, W., Sakihama, Y., Shimizu, S., Sunami, T., Fukazawa, T., Suzuki, M., Yatsunami, R., Nakamura, S. & Takénaka, A. (2004). J. Mol. Biol. 343, 785-795.]). The classical xylanases and endoglucanases (as first reported by Alzari et al., 1996[Alzari, P. M., Souchon, H. & Dominguez, R. (1996). Structure, 4, 265-275.]) are believed to have the base at the end of helix α8, with the equivalent residue in TtGH8 being Asp281. In order to clarify the catalytic residues in TtGH8, crystals were soaked in both xylobiose (X2) and xylotriose (X3) and the resulting structures were refined at 1.4 and 1.8 Å resolution, respectively (Tables 2[link] and 3[link]).

X2 was bound in the −2 and −3 subsites (Supplementary Fig. S4; subsite nomenclature is as discussed by Davies et al., 1997[Davies, G. J., Wilson, K. S. & Henrissat, B. (1997). Biochem. J. 321, 557-559.]), hinting at the strength of the −3 subsite, and consistent with the product profiles (Fig. 2[link]a). X3 was observed bound in the −3 to −1 subsites (Fig. 4[link]b) and confirms the catalytic residue proposals, with Glu73 (which has rotated from its position in the apo structure into this more catalytically relevant position) interacting with the O1 hydroxyl and with Asp281 interacting with a water molecule `below' C1 in a position mimicking that which would be expected for hydrolysis with inversion of anomeric configuration. Notably, the −1 subsite sugar is not observed in its low-energy 4C1 chair conformation, but is instead observed distorted into a 2,5B conformation (Fig. 4[link]b), consistent with proposals for the catalytic itinerary of GH8 enzymes discussed below.

Enzymatic glycoside hydrolysis involves the distortion of the reactive, −1 subsite, sugar into a variety of skew-boat and boat conformations, reflecting the requirements of inline attack and the stereoelectronic requirements of an oxo­carbenium-ion-like transition state (for reviews, see Davies & Williams, 2016[Davies, G. J. & Williams, S. J. (2016). Biochem. Soc. Trans. 44, 79-87.]; Speciale et al., 2014[Speciale, G., Thompson, A., Davies, G. J. & Williams, S. J. (2014). Curr. Opin. Chem. Biol. 28, 1-13.]; Davies et al., 2003[Davies, G. J., Ducros, V. M.-A., Varrot, A. & Zechel, D. L. (2003). Biochem. Soc. Trans. 31, 523-527.], 2012[Davies, G. J., Planas, A. & Rovira, C. (2012). Acc. Chem. Res. 45, 227-234.]). The GH8 family has been proposed to go through a 2,5B-like transition state, notably because of the observation of sugars with 2SO and 2,5B conformations in complexes of the CelA endoglucanase (Guérin et al., 2002[Guérin, D. M., Lascombe, M. B., Costabel, M., Souchon, H., Lamzin, V., Béguin, P. & Alzari, P. M. (2002). J. Mol. Biol. 316, 1061-1069.]) that were subsequently analysed by QM/MM metadynamics (Petersen et al., 2009[Petersen, L., Ardèvol, A., Rovira, C. & Reilly, P. J. (2009). J. Phys. Chem. B, 113, 7331-7339.]).

The previous X3 complex, that of the P. haloplanktis cold-adapted xylanase (Collins et al., 2005[Collins, T., De Vos, D., Hoyoux, A., Savvides, S. N., Gerday, C., Van Beeumen, J. & Feller, G. (2005). J. Mol. Biol. 354, 425-435.]; De Vos et al., 2006[De Vos, D., Collins, T., Nerinckx, W., Savvides, S. N., Claeyssens, M., Gerday, C., Feller, G. & Van Beeumen, J. (2006). Biochemistry, 45, 4797-4807.]), revealed binding in the +1 to +3 subsites, which together with the −3 to −1 observations here approximately defined binding through the six subsites of the enzyme, which is consistent with the inactive-variant (Asp144Ala) complex with X5 observed for the P. haloplanktis enzyme by De Vos et al. (2006[De Vos, D., Collins, T., Nerinckx, W., Savvides, S. N., Claeyssens, M., Gerday, C., Feller, G. & Van Beeumen, J. (2006). Biochemistry, 45, 4797-4807.]). In order to observe the hexasaccharide complex of TtGH8 we first made a catalytic variant at the proposed base, TtGH8 D281N; however, this appeared to retain around 0.1% of the catalytic activity (kcat/Km of 1.8 × 104 mg−1 ml min−1; Table 1[link]) in the reducing-sugar assay with MLX as substrate, which is consistent with similar mutants in other GH8 systems (Collins et al., 2005[Collins, T., De Vos, D., Hoyoux, A., Savvides, S. N., Gerday, C., Van Beeumen, J. & Feller, G. (2005). J. Mol. Biol. 354, 425-435.]; De Vos et al., 2006[De Vos, D., Collins, T., Nerinckx, W., Savvides, S. N., Claeyssens, M., Gerday, C., Feller, G. & Van Beeumen, J. (2006). Biochemistry, 45, 4797-4807.]). In addition, structures with X6, with long soak times, all revealed xylotriose product complexes (not shown). A complex with unhydrolysed X6 was therefore obtained by rapid soaking/cooling with a total time of approximately 10 s. Thus, a TtGH8 D281N structure in complex with X6 was obtained at 1.6 Å resolution, revealing X6 bound across the entire substrate-binding groove from subsites −3 to +3 (Figs. 4[link]c, 4[link]d and 4[link]e; Tables 2[link] and 3[link]).

The complex of TtGH8 with xylotriose showed distortion of the −1 xylose into a boat configuration, consistent with past work by others on the conformational itinerary in this family. To our surprise, the TtGH8 D281N–X6 complex revealed something different; namely, the −1 subsite sugar in a completely ring-flipped, southern hemisphere 1C4 chair conformation (Fig. 4[link]f). Although this allowed access to a hexasaccharide complex structure, the ring-flipped −1 sugar is unlikely to be representative of a catalytically relevant conformation since its position neither allows protonation of the leaving group by Glu73 nor is there a potential reactive water. Indeed, in the 1C4 chair conformation the now axial (and `down') O2 occupies the position that should instead be occupied by the nucleophilic water. Indeed, the only other structure in this family in which a substrate spanning the −1 subsite has been observed in anything other than the boat conformation was in the X5 complex of the P. haloplanktis GH8 (PDB entry 2b4f; De Vos et al., 2006[De Vos, D., Collins, T., Nerinckx, W., Savvides, S. N., Claeyssens, M., Gerday, C., Feller, G. & Van Beeumen, J. (2006). Biochemistry, 45, 4797-4807.]). Here, the −1 xylose was undistorted 4C1 (although with scant density) and featured a position of the catalytic acid (akin to the TtGH8 apo structure) that was not commensurate with its role as a proton donor. This work, together with our current study, therefore highlights the difficulty in analysing substrate-complex structures with xylose-containing oligosaccharides which may be influenced by the integral conformational flexibility of xylose. Importantly, whilst the Asp281Asn variant has allowed definition of the interactions of the −3 to −2 and +1 to +3 subsites well, it highlights the occasional dangers of using inactive variants to study substrate distortion in the −1 site.

4. Discussion

As with recent studies on xylan utilization by the human microbiota (Rogowski et al., 2015[Rogowski, A. et al. (2015). Nature Commun. 6, 7481.]), the digestive system of bivalve molluscs such as marine wood-boring shipworms has the potential to provide a wealth of carbohydrate-active enzymes with potentially beneficial applications. Here, we have studied a potential GH8 xylanase from the shipworm symbiont T. turnerae, the genome sequence of which (Yang et al., 2009[Yang, J. C. et al. (2009). PLoS One, 4, e6085.]) unveiled a treasure chest of carbohydrate-active enzymes. We have shown that TtGH8 is a single-domain endo-xylanase with six catalytically relevant subsites that hydrolyses X6 to yield predominantly xylotriose. The enzyme is active on diverse classical β-1,4-xylans, likely reflecting its role in the host digestion of woody biomass after the possible translocation of bacterial proteins from the gills to the connected gastrointestinal tract of its Teredinidae shipworm host (O'Connor et al., 2014[O'Connor, R. M. et al. (2014). Proc. Natl Acad. Sci. USA, 111, E5096-E5104.]). The enzyme thus bears similarities to the well studied P. haloplanktis `cold-adapted' xylanase, with which TtGH8 shares 33% identity. Intriguingly, TtGH8 shows the highest activity on mixed-linkage β-1,3,β-1,4 xylans, which may reflect a genuine biological adaption to, or at least an accommodation of, these marine substrates. The mixed-linkage marine xylan used in this study is found as a component of the red alga Palmaria palmata, and is a polysaccharide that is involved in mechanical support, development and defence (Viana et al., 2011[Viana, A. G., Noseda, M. D., Gonçalves, A. G., Duarte, M. E. R., Yokoya, N., Matulewicz, M. C. & Cerezo, A. S. (2011). Carbohydr. Res. 346, 1023-1028.]). Analysis of this polysaccharide suggests a 1:3 ratio of β-1,3:β-1,4 moieties. Whilst pure β-1,4 bonding of xylose residues would result in a threefold screw-axis helical structure, the irregular distribution of β-1,3 sections between variable lengths of β-1,4 sections may cause disruption of this regular conformation (Viana et al., 2011[Viana, A. G., Noseda, M. D., Gonçalves, A. G., Duarte, M. E. R., Yokoya, N., Matulewicz, M. C. & Cerezo, A. S. (2011). Carbohydr. Res. 346, 1023-1028.]). Optical rotation alignment further suggests that mixed-linkage xylan exhibits a `random-coil' structure; unlike linear β-1,4-xylan, which may form interactions with other chains, the presence of β-1,3 linkages introduces flexibility which may assist in the solubility (Viana et al., 2011[Viana, A. G., Noseda, M. D., Gonçalves, A. G., Duarte, M. E. R., Yokoya, N., Matulewicz, M. C. & Cerezo, A. S. (2011). Carbohydr. Res. 346, 1023-1028.]; Cerezo et al., 1971[Cerezo, A. S., Lezerovich, A., Labriola, R. & Rees, D. A. (1971). Carbohydr. Res. 19, 289-296.]). Flexibility may improve the fitting of the polysaccharide into the V-shaped binding site of TtGH8. Improvement in solu­bility owing to the flexible nature of the xylan chain may be a factor in the increased degradation rate exhibited by TtGH8. We would argue, therefore, that the increased activity on MLX may not necessarily reflect the requirement for a β-1,3-linked xylose at one or more of the subsites, but confers increased solubility and thus enzyme access. It is also possible, given its marine environment, that the specificity of the enzyme has adapted to potential terrestrial xylans (β-1,4-xylans) and marine xylans (MLXs). It should be noted, however, that only kcat/Km values were determined and not the individual kinetic constants. This was because the maximum soluble substrate concentration was much lower than Km, as indicated by the linear relationship between the rate and the substrate concentration. It is possible, therefore, that the difference in activity reflects a variation in Km values that may not reflect the binding affinities but the actual concentrations of available substrate in two very different xylans. MLX has not been extensively used as a substrate in the analysis of xylanase activity. Exploring whether MLXs feature as the optimum substrate for all xylanases, or only those enzymes exposed to a marine system, will provide insight into the environmental selection pressures that influence glycoside hydrolase activity. In a discussion of shipworm larvae, Turner states that whilst shipworm larvae are quick to settle into burrows after extrusion from the adult, most wooden structures are covered in a `protective forest' of various organisms, including algae, in which the young shipworm larvae may swim before settlement (Turner, 1966[Turner, R. D. (1966). A Survey and Illustrated Catalogue of the Teredinidae (Mollusca: Bivalvia). Cambridge: The Museum of Comparative Biology.]). Bacterial symbionts are passed onto shipworm young, so it is possible that algal particles are digested using enzymes such as TtGH8 before or during larvae settlement. Such analyses highlight how shipworms and their symbionts offer a plethora of possibilities for novel enzyme discovery and application for biotechnology and biofuels.

Acknowledgements

The authors would also like to thank Diamond Light Source for beamtime (proposals mx-9948 and mx-13587) and the staff of beamlines I04 and I02 for assistance with crystal testing and data collection.

Funding information

This project was funded by the BBSRC (grant BB/L001926/1). GJD is a Royal Society Ken Murray Research Professor.

References

First citationAdachi, W., Sakihama, Y., Shimizu, S., Sunami, T., Fukazawa, T., Suzuki, M., Yatsunami, R., Nakamura, S. & Takénaka, A. (2004). J. Mol. Biol. 343, 785–795.  CrossRef PubMed Google Scholar
First citationAlzari, P. M., Souchon, H. & Dominguez, R. (1996). Structure, 4, 265–275.  CrossRef CAS PubMed Web of Science Google Scholar
First citationBetcher, M. A. (2011). Thesis. Oregon Health and Science University, Portland, Oregon, USA.  Google Scholar
First citationBiely, P., Singh, S. & Puchart, V. (2016). Biotechnol. Adv. 34, 1260–1274.  Web of Science CrossRef PubMed Google Scholar
First citationBomble, Y. J., Lin, C.-Y., Amore, A., Wei, H., Holwerda, E. K., Ciesielski, P. N., Donohoe, B. S., Decker, S. R., Lynd, L. R. & Himmel, M. E. (2017). Curr. Opin. Chem. Biol. 41, 61–70.  CrossRef PubMed Google Scholar
First citationBoynton, L. C. & Miller, R. C. (1927). J. Biol. Chem. 75, 613–618.  Google Scholar
First citationCerezo, A. S., Lezerovich, A., Labriola, R. & Rees, D. A. (1971). Carbohydr. Res. 19, 289–296.  CrossRef Google Scholar
First citationCharnock, S. J., Spurway, T. D., Xie, H., Beylot, M. H., Virden, R., Warren, R. A., Hazlewood, G. P. & Gilbert, H. J. (1998). J. Biol. Chem. 273, 32187–32199.  Web of Science CrossRef CAS PubMed Google Scholar
First citationCollins, T., De Vos, D., Hoyoux, A., Savvides, S. N., Gerday, C., Van Beeumen, J. & Feller, G. (2005). J. Mol. Biol. 354, 425–435.  Web of Science CrossRef PubMed CAS Google Scholar
First citationCragg, S. M., Beckham, G. T., Bruce, N. C., Bugg, T. D. H., Distel, D. L., Dupree, P., Etxabe, A. G., Goodell, B. S., Jellison, J., McGeehan, J. E., McQueen-Mason, S. J., Schnorr, K., Walton, P. H., Watts, J. E. M. & Zimmer, M. (2015). Curr. Opin. Chem. Biol. 29, 108–119.  Web of Science CrossRef CAS PubMed Google Scholar
First citationDavies, G. J., Ducros, V. M.-A., Varrot, A. & Zechel, D. L. (2003). Biochem. Soc. Trans. 31, 523–527.  CrossRef PubMed Google Scholar
First citationDavies, G. & Henrissat, B. (1995). Structure, 3, 853–859.  CrossRef CAS PubMed Web of Science Google Scholar
First citationDavies, G. J., Planas, A. & Rovira, C. (2012). Acc. Chem. Res. 45, 227–234.  Google Scholar
First citationDavies, G. J. & Williams, S. J. (2016). Biochem. Soc. Trans. 44, 79–87.  CrossRef PubMed Google Scholar
First citationDavies, G. J., Wilson, K. S. & Henrissat, B. (1997). Biochem. J. 321, 557–559.  CrossRef CAS PubMed Web of Science Google Scholar
First citationDe Vos, D., Collins, T., Nerinckx, W., Savvides, S. N., Claeyssens, M., Gerday, C., Feller, G. & Van Beeumen, J. (2006). Biochemistry, 45, 4797–4807.  Web of Science CrossRef PubMed CAS Google Scholar
First citationEkborg, N. A., Morrill, W., Burgoyne, A. M., Li, L. & Distel, D. L. (2007). Appl. Environ. Microbiol. 73, 7785–7788.  CrossRef PubMed Google Scholar
First citationEmsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. (2010). Acta Cryst. D66, 486–501.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationFierobe, H. P., Bagnara-Tardif, C., Gaudin, C., Guerlesquin, F., Sauve, P., Belaich, A. & Belaich, J.-P. (1993). Eur. J. Biochem. 217, 557–565.  CrossRef PubMed Google Scholar
First citationFushinobu, S., Hidaka, M., Honda, Y., Wakagi, T., Shoun, H. & Kitaoka, M. (2005). J. Biol. Chem. 280, 17180–17186.  Web of Science CrossRef PubMed CAS Google Scholar
First citationGallager, S. M., Turner, R. D. & Berg, C. J. (1981). J. Exp. Mar. Biol. Ecol. 52, 63–77.  CrossRef Google Scholar
First citationGuérin, D. M., Lascombe, M. B., Costabel, M., Souchon, H., Lamzin, V., Béguin, P. & Alzari, P. M. (2002). J. Mol. Biol. 316, 1061–1069.  PubMed Google Scholar
First citationHemsworth, G. R., Johnston, E. M., Davies, G. J. & Walton, P. H. (2015). Trends Biotechnol. 33, 747–761.  Web of Science CrossRef CAS PubMed Google Scholar
First citationHenrissat, B. & Davies, G. (1997). Curr. Opin. Struct. Biol. 7, 637–644.  CrossRef CAS PubMed Web of Science Google Scholar
First citationHimmel, M. E., Ding, S.-Y., Johnson, D. K., Adney, W. S., Nimlos, M. R., Brady, J. W. & Foust, T. D. (2007). Science, 315, 804–807.  Web of Science CrossRef PubMed CAS Google Scholar
First citationHorak, R. E. A. & Montoya, J. P. (2014). J. Mar. Biol. Assoc. UK, 94, 177–185.  CrossRef Google Scholar
First citationKrissinel, E. & Henrick, K. (2004). Acta Cryst. D60, 2256–2268.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationLebedev, A. A., Young, P., Isupov, M. N., Moroz, O. V., Vagin, A. A. & Murshudov, G. N. (2012). Acta Cryst. D68, 431–440.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationLi, C., Zhao, X., Wang, A., Huber, G. W. & Zhang, T. (2015). Chem. Rev. 115, 11559–11624.  CrossRef PubMed Google Scholar
First citationLombard, V., Golaconda Ramulu, H., Drula, E., Coutinho, P. M. & Henrissat, B. (2014). Nucleic Acids Res. 42, D490–D495.  Web of Science CrossRef CAS PubMed Google Scholar
First citationMatsui, I., Ishikawa, K., Matsui, E., Miyairi, S., Fukui, S. & Honda, K. (1991). J. Biochem. 109, 566–569.  CrossRef PubMed Google Scholar
First citationMcCoy, A. J., Grosse-Kunstleve, R. W., Adams, P. D., Winn, M. D., Storoni, L. C. & Read, R. J. (2007). J. Appl. Cryst. 40, 658–674.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationMcNicholas, S., Potterton, E., Wilson, K. S. & Noble, M. E. M. (2011). Acta Cryst. D67, 386–394.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationMurshudov, G. N., Skubák, P., Lebedev, A. A., Pannu, N. S., Steiner, R. A., Nicholls, R. A., Winn, M. D., Long, F. & Vagin, A. A. (2011). Acta Cryst. D67, 355–367.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationO'Connor, R. M. et al. (2014). Proc. Natl Acad. Sci. USA, 111, E5096–E5104.  PubMed Google Scholar
First citationPauly, M. & Keegstra, K. (2008). Plant J. 54, 559–568.  Web of Science CrossRef PubMed Google Scholar
First citationPell, G., Szabo, L., Charnock, S. J., Xie, H., Gloster, T. M., Davies, G. J. & Gilbert, H. J. (2004). J. Biol. Chem. 279, 11777–11788.  Web of Science CrossRef PubMed CAS Google Scholar
First citationPetersen, L., Ardèvol, A., Rovira, C. & Reilly, P. J. (2009). J. Phys. Chem. B, 113, 7331–7339.  CrossRef PubMed Google Scholar
First citationPotterton, L. et al. (2018). Acta Cryst. D74, 68–84.  Web of Science CrossRef IUCr Journals Google Scholar
First citationRogowski, A. et al. (2015). Nature Commun. 6, 7481.  Web of Science CrossRef Google Scholar
First citationRye, C. S. & Withers, S. G. (2000). Curr. Opin. Chem. Biol. 4, 573–580.  Web of Science CrossRef PubMed CAS Google Scholar
First citationSomerville, C. (2007). Curr. Biol. 17, R115–R119.  Web of Science CrossRef PubMed Google Scholar
First citationSpeciale, G., Thompson, A., Davies, G. J. & Williams, S. J. (2014). Curr. Opin. Chem. Biol. 28, 1–13.  Google Scholar
First citationThe CAZypedia Consortium (2018). Glycobiology, 28, 3–8.  Web of Science CrossRef PubMed Google Scholar
First citationTurner, R. D. (1966). A Survey and Illustrated Catalogue of the Teredinidae (Mollusca: Bivalvia). Cambridge: The Museum of Comparative Biology.  Google Scholar
First citationVagin, A. & Teplyakov, A. (2010). Acta Cryst. D66, 22–25.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationViana, A. G., Noseda, M. D., Gonçalves, A. G., Duarte, M. E. R., Yokoya, N., Matulewicz, M. C. & Cerezo, A. S. (2011). Carbohydr. Res. 346, 1023–1028.  CrossRef PubMed Google Scholar
First citationWalton, P. H. & Davies, G. J. (2016). Curr. Opin. Chem. Biol. 31, 195–207.  Web of Science CrossRef CAS PubMed Google Scholar
First citationWaterbury, J. B., Calloway, C. B. & Turner, R. D. (1983). Science, 221, 1401–1403.  CrossRef PubMed Google Scholar
First citationWinter, G. (2010). J. Appl. Cryst. 43, 186–190.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationWinter, G., Waterman, D. G., Parkhurst, J. M., Brewster, A. S., Gildea, R. J., Gerstel, M., Fuentes-Montero, L., Vollmar, M., Michels-Clark, T., Young, I. D., Sauter, N. K. & Evans, G. (2018). Acta Cryst. D74, 85–97.  Web of Science CrossRef IUCr Journals Google Scholar
First citationYang, J. C. et al. (2009). PLoS One, 4, e6085.  CrossRef PubMed Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoSTRUCTURAL
BIOLOGY
ISSN: 2059-7983
Follow Acta Cryst. D
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds