journal menu
![[Figure 2]](tz5111fig2mag.jpg)
|
|
Figure 2
Procedure for anaerobic chip assembly. (a) Assembling tool with chip tray. (b) The first chip is loaded into the assembling tool. (c) 2 µl of sample slurry is gently loaded onto the chip. (d) Small drops of superglue are added to all four corners of the chip. (e) A second chip is placed on top to create a sealed chip sandwich. (f) Chips are gently pressed with the lever of the assembling tool to secure the seal between them. |
![[Figure 2]](tz5111fig2.jpg)
 | STRUCTURAL BIOLOGY |
ISSN: 2059-7983
Open 
access
access
