Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
The title compound, C14H14ClN, is a chloro analogue of tacrine, an acetyl­cholinesterase inhibitor. The compound comprises a seven-membered alicyclic ring whose CH donor groups are engaged in extensive inter­molecular inter­actions. The important feature of this crystal structure is that, regardless of the presence of two typical hydrogen-bonding acceptors, viz. chlorine and nitro­gen, the corresponding C-H...Cl and C-H...N inter­actions take no significant role in crystal stabilization. The mol­ecules form dimers through [pi]-[pi] inter­actions with an inter­planar distance between inter­acting pyridine rings of 3.576 (1) Å. Within the dimers, the mol­ecules are additionally inter­connected by four C-H...[pi] inter­actions. The dimers arrange into regular columns via further inter­molecular C-H...[pi] inter­actions.

Supporting information

cif

Crystallographic Information File (CIF) https://doi.org/10.1107/S0108270108022221/sk3246sup1.cif
Contains datablocks global, I

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S0108270108022221/sk3246Isup2.hkl
Contains datablock I

CCDC reference: 703733

Comment top

Tacrine, (I), is the first reversible inhibitor of acetylcholinesterase (AChE, EC 3.1.1.7) approved by the US Federal Drug Administration for palliative treatment of Alzheimer's disease. Harel et al. (1993) have determined the TcAChE crystal structure (from Torpedo californica) complexed with (I) (Protein Data Bank code 1acj). Tacrine forms stacking interactions with Trp 84 and Phe 330 aromatic rings inside of the AChE active site gorge. Protonated aromatic N atoms form hydrogen bonds with carbonyl O atoms of His 440 (a part of the AChE catalytic triad), while amino N atoms form hydrogen bonds with conserved water molecules. However, the determined AChE–tacrine crystal structure does not reveal the nature of the cycloalkyl group's influence on the anticholinesterase activity. Severe hepatotoxicity has reduced the therapeutic use of (I), but the search for tacrine analogs with improved properties is of persistent interest (Munoz-Torrero & Camps, 2006).

In the past decade, approximately 100 homo- and heterodimeric tacrine analogs, (III) (n = 5–7 and m = 6–8), have been synthesized. These compounds are diverse in respect to the linker length, the substituents on the tetrahydroacridine nucleus and the size of the alicyclic ring. 4-Aminopyridine and 4-aminoquinoline, (IV), have very weak anticholinesterase activity, indicating the importance of the cycloalkyl ring for the inhibition potency (Kaul, 1962). The same is true for the homodimeric AChE inhibitors. 4-Aminoquinoline dimers are considerably weaker AChE inhibitors than tacrine homodimers (Han et al., 1999). Furthermore, a decrease in the size of the alicyclic ring to five-membered causes a 100-fold decrease in the AChE inhibition abilities, while their increase to seven-membered produces a negligible decrease (Hu et al., 2002). Different 9-chloro analogs of tacrine serve as synthones for the synthesis of dual homo- and heterodimeric tacrine derivatives. Having this in mind, we report here the molecular structure of the title compound, (II).

Compound (II) (Fig. 1) consists of a 4-chloroquinoline system and a cycloheptyl ring, which is fused to the aromatic moiety. As expected, the quinoline system is highly planar, having an r.m.s. deviation of fitted atoms of 0.016 Å. The Cl atom lies 0.067 (1) Å out of the quinoline plane, while atoms C6 and C10 of the fused cycloheptyl ring are coplanar within 0.083 (2) Å. The seven-membered ring adopts a quite regular chair conformation, where the C6—C5A—C10A—C10 torsion angle and the C6—C7···C9—C10 angle are 2.2 (2) and -1.6 (2)° respectively. The bond distances within the molecule (Table 1) are in good agreement with those reported for the two derivatives that contain an additional phenyl ring fused to the cycloheptyl ring, namely 10-chloro-6,7-dihydro-5H-benzo[6,7]cyclohepta[1,2-b]quinoline, (V), and 10-methyl-6,7-dihydro-5H-benzo[6,7]cyclohepta[1,2-b]-quinoline. (VI) (Ray et al., 1998).

Despite the presence of the typical hydrogen-bonding acceptors nitrogen and chlorine, the crystal structure of (II) lacks the expected intermolecular C—H···N and C—H···Cl hydrogen bonding. On the other hand, the crystal structure is characterized by a number of weak C—H···π interactions (Desiraju & Steiner, 1999), which involve all of the axial H atoms of the cycloheptyl fragment and the quinoline moiety as a π system (Table 2).

The cycloheptyl donors C6 and C10, which are the most coplanar with the quinoline system, are involved in the C—H···π interactions with the shortest H···Perp distances (Table 2). Two pairs of these interactions connect the centrosymmetrically related molecules into a dimer. The formation of dimers is also favored by π stacking interactions occurring between the pyridine rings of the molecular pair. Owing to inversion symmetry, the stacked pyridine rings have opposite orientations, with a Cg1···Cg1ii distance of 3.837 (1) Å and a slippage of 1.391 Å [Cg1 refers to the centroid of the pyridine ring; symmetry codes: (ii) -x + 1, -y, -z]. The pyridine rings are arranged in such a way that atom C10A is positioned above the center of the neighboring ring (Fig. 2). The interplanar separation between the rings is 3.576 (1) Å, while the shortest distance found between the atoms, C5A···C11ii [please check added symmetry code], is 3.567 (2) Å.

The additional C—H···π interactions (Table 2) formed from each side of the dimer engage the rest of the cycloheptyl C—H donors, connecting the dimers into a column extending along the b axis (Fig. 2). Although rather weak, the C—H···π interactions between the dimers imply simultaneous engagement of six CH donor groups and their clear directionality toward the two neighboring quinoline systems. The perpendicular distances of all interacting H atoms to quinoline planes are below 3.05 Å. The dimers within a column are strictly parallel; however, the size and chair-like conformation of the cycloheptyl ring increase the separation between the dimers in the b direction, preventing the potential ππ stacking between their aromatic parts. In this case, the interplanar distance between the quinoline rings is 5.035 (1) Å. The columns of dimers are further related through very weak, cyclic, C4—H4···N5iii and C8—H8b···Cl1iv interactions, forming a two-dimensional structure parallel to the ab plane [C4—H4 = 0.93 Å, H4···N5iii = 2.89 Å, C4···N5iii = 3.661 (4) Å, C4—H4···N5iii = 141° and C9—H9B = 0.97 Å, H9B···Cl1iv = 3.31 Å, C8···Cl1iv = 4.027 (4) Å, C9—H9b···Cl1iv = 132°; symmetry codes: (iii) -x + 2, -y + 1, -z; (v) -x, -y, -z; Fig. 3]. These are the shortest intermolecular interactions concerning the N5 and Cl1 acceptors.

The crystal arrangements in (V) and (VI), and also in 6,9-dichloro-1,2,3,4-tetrahydroacridine (Elsinghorst et al., 2007), which is the cyclohexyl analogue of (II), display a similar method of dimer formation. In each of these structures, the centrosymmetrically related molecules are associated by weak C—H···π interactions, where the cycloalkyl rings provide the donors and the quinoline cores serve as the acceptors. In addition to C—H···π interactions the dimers are stabilized by ππ stacking involving only the pyridine fragments of the molecules. The interplanar distances between the parallel quinoline systems in these structures range from 3.55 to 3.70 Å.

According to previous reports, weak C—H···π and ππ interactions play a dominant role in crystal structure of 11-chloro-7,8,9,10-tetrahydro-6H-cyclohepta[b]quinoline (reference?) as well as in similar crystal structures (references?).

Related literature top

For related literature, see: Desiraju & Steiner (1999); Elsinghorst et al. (2007); Han et al. (1999); Harel et al. (1993); Hu et al. (2002); Kaul (1962); Munoz-Torrero & Camps (2006); Ray et al. (1998).

Experimental top

All chemicals used were of analytical grade. To a mixture of anthranilic acid (2.4 g, 17.5 mmol) and cycloheptanone (2.1 ml, 17.5 mmol) in an ice-bath was carefully added phosphorous oxychloride (POCl3, 17.5 ml). The mixture was refluxed for 2 h and then cooled to room temperature. Surplus POCl3 was removed under reduced pressure and the resulting slurry was subsequently poured into an ice and solid K2CO3 mixture with vigorous stirring. The separated solid was taken up in ethyl acetate; the solution was evaporated and the crude residue was recrystallized from acetone to afford 3.20 g (39.42%) of (II) as yellow crystals. The single crystals that were submitted for single-crystal X-ray analysis were obtained after recrystalization from acetone (m.p. 367–369 K). Analysis found for C14H14ClN: C 72.06, H 6.17, N 6.04% (also give expected values?). 1H NMR: δ 1.67–1.95 (m, 6H); 3.17, 3.20, 3.22, 3.25 (m, 4H); 7.50, 7.53, 7.56 (triplet-like peaks, 1H); 7.62, 7.65, 7.69 (triplet-like peaks, 1H); 7.96, 8.00 (doublet-like peaks, 1H); 8.13, 8.17 (doublet-like peaks, 1H). 13C NMR: δ 26.78, 27.367, 30.26, 31.74, 40.148, 76.38, 77.00, 77.64, 124.45, 125.40, 126.62, 128.80, 129.07, 133.84, 139.63, 146.42, 164.76.

Refinement top

All H atoms were found in a difference Fourier map, but they were placed at geometrically calculated positions and refined using a riding model. C—H distances were fixed to 0.97 and 0.93 Å for Csp3 and Csp2 atoms, respectively. The Uiso values of all H atoms were set to 1.2Ueq of the parent atom.

Computing details top

Data collection: CAD-4 Software (Enraf–Nonius, 1989); cell refinement: CAD-4 Software (Enraf–Nonius, 1989); data reduction: XCAD4 (Harms & Wocadlo, 1995); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: ORTEP-3 (Farrugia, 1997); software used to prepare material for publication: WinGX (Farrugia, 1999) and PLATON (Spek, 2003).

Figures top
[Figure 1] Fig. 1. A view of the molecule of (II), with the atom-numbering scheme. Displacement ellipsoids are drawn at the 40% probability level.
[Figure 2] Fig. 2. Segment of a column of molecules generated by C—H···π and ππ interactions. [Ideally the atom labels should include symmetry codes in accordance with those given in the text.]
[Figure 3] Fig. 3. Columns of molecules connected by weak C4—H4···N5iii and C9—H9B···Cl1iv interactions, viewed approximately along the c axis. The interactions within the columns (presented in Fig. 2) have been omitted for clarity. [Ideally the atom labels should include symmetry codes in accordance with those given in the text.]
11-chloro-2,3,4,5-tetrahydro-1H-cyclohepta[b]quinoline top
Crystal data top
C14H14ClNZ = 2
Mr = 231.71F(000) = 244
Triclinic, P1Dx = 1.306 Mg m3
Hall symbol: -P 1Mo Kα radiation, λ = 0.71073 Å
a = 8.213 (2) ÅCell parameters from 25 reflections
b = 8.727 (2) Åθ = 11.5–15.2°
c = 9.042 (3) ŵ = 0.29 mm1
α = 90.50 (2)°T = 293 K
β = 95.32 (3)°Prism, yellow
γ = 113.86 (3)°0.56 × 0.44 × 0.42 mm
V = 589.4 (3) Å3
Data collection top
Enraf–Nonius CAD-4
diffractometer
Rint = 0.011
Radiation source: fine-focus sealed tubeθmax = 26.0°, θmin = 2.3°
Graphite monochromatorh = 010
ω/2θ scansk = 109
2548 measured reflectionsl = 1111
2309 independent reflections3 standard reflections every 60 min
2003 reflections with I > 2σ(I) intensity decay: none
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.037Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.107H-atom parameters constrained
S = 1.08 w = 1/[σ2(Fo2) + (0.0537P)2 + 0.133P]
where P = (Fo2 + 2Fc2)/3
2309 reflections(Δ/σ)max < 0.001
145 parametersΔρmax = 0.19 e Å3
0 restraintsΔρmin = 0.20 e Å3
Crystal data top
C14H14ClNγ = 113.86 (3)°
Mr = 231.71V = 589.4 (3) Å3
Triclinic, P1Z = 2
a = 8.213 (2) ÅMo Kα radiation
b = 8.727 (2) ŵ = 0.29 mm1
c = 9.042 (3) ÅT = 293 K
α = 90.50 (2)°0.56 × 0.44 × 0.42 mm
β = 95.32 (3)°
Data collection top
Enraf–Nonius CAD-4
diffractometer
Rint = 0.011
2548 measured reflections3 standard reflections every 60 min
2309 independent reflections intensity decay: none
2003 reflections with I > 2σ(I)
Refinement top
R[F2 > 2σ(F2)] = 0.0370 restraints
wR(F2) = 0.107H-atom parameters constrained
S = 1.08Δρmax = 0.19 e Å3
2309 reflectionsΔρmin = 0.20 e Å3
145 parameters
Special details top

Experimental. Melting point was obtained on Buchi apparatus in open capillary tube and is uncorrected. NMR spectra were recorded on Varian Gemini 200 (200/50 MHz) spectrometer in CDCl3, using tetramethylsilane (TMS) as internal standard.

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
C10.6756 (2)0.2078 (2)0.37705 (18)0.0508 (4)
H10.58540.16430.43950.061*
C20.8504 (3)0.2616 (2)0.43426 (19)0.0591 (4)
H20.87820.25270.53500.071*
C30.9886 (2)0.3302 (2)0.3424 (2)0.0601 (4)
H31.10740.36810.38280.072*
C40.9495 (2)0.3415 (2)0.19432 (19)0.0531 (4)
H41.04200.38770.13440.064*
C4A0.76991 (19)0.28386 (18)0.13073 (16)0.0407 (3)
C5A0.5718 (2)0.24434 (17)0.07907 (16)0.0415 (3)
C60.5489 (2)0.2602 (2)0.24480 (17)0.0533 (4)
H6A0.46970.15140.29080.064*
H6B0.66420.29170.28260.064*
C70.4727 (3)0.3889 (2)0.2919 (2)0.0645 (5)
H7A0.53070.48820.22560.077*
H7B0.50330.42170.39130.077*
C80.2719 (3)0.3287 (2)0.2915 (2)0.0664 (5)
H8B0.21390.23140.36020.080*
H8A0.23700.41610.32870.080*
C90.2027 (3)0.2822 (2)0.1411 (2)0.0629 (5)
H9B0.07530.25520.15100.075*
H9A0.26090.37900.07210.075*
C100.2338 (2)0.1327 (2)0.0748 (2)0.0582 (4)
H10B0.14700.08170.00470.070*
H10A0.21280.04930.15420.070*
C10A0.41920 (19)0.17982 (17)0.00316 (17)0.0425 (3)
C110.4537 (2)0.16740 (18)0.15295 (17)0.0425 (3)
C11A0.6304 (2)0.21762 (17)0.22388 (16)0.0398 (3)
Cl10.27868 (6)0.09149 (6)0.26571 (5)0.06761 (19)
N50.73866 (16)0.29468 (15)0.01926 (14)0.0437 (3)
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
C10.0615 (10)0.0509 (9)0.0416 (8)0.0232 (8)0.0118 (7)0.0098 (7)
C20.0713 (11)0.0645 (11)0.0413 (9)0.0292 (9)0.0028 (8)0.0058 (8)
C30.0520 (10)0.0675 (11)0.0575 (10)0.0235 (9)0.0065 (8)0.0015 (8)
C40.0433 (8)0.0588 (10)0.0548 (9)0.0177 (7)0.0070 (7)0.0075 (7)
C4A0.0432 (8)0.0376 (7)0.0428 (8)0.0173 (6)0.0077 (6)0.0068 (6)
C5A0.0493 (8)0.0341 (7)0.0418 (8)0.0176 (6)0.0047 (6)0.0057 (6)
C60.0658 (10)0.0544 (9)0.0411 (8)0.0262 (8)0.0042 (7)0.0042 (7)
C70.0870 (13)0.0565 (10)0.0489 (10)0.0297 (10)0.0022 (9)0.0138 (8)
C80.0837 (13)0.0572 (10)0.0618 (11)0.0381 (10)0.0205 (10)0.0007 (8)
C90.0568 (10)0.0638 (11)0.0726 (12)0.0328 (9)0.0101 (9)0.0014 (9)
C100.0458 (9)0.0519 (9)0.0687 (11)0.0132 (7)0.0033 (8)0.0087 (8)
C10A0.0430 (8)0.0339 (7)0.0499 (8)0.0152 (6)0.0034 (6)0.0064 (6)
C110.0424 (8)0.0363 (7)0.0507 (8)0.0159 (6)0.0139 (6)0.0106 (6)
C11A0.0475 (8)0.0338 (7)0.0407 (7)0.0184 (6)0.0087 (6)0.0071 (5)
Cl10.0522 (3)0.0795 (3)0.0717 (3)0.0225 (2)0.0281 (2)0.0234 (2)
N50.0456 (7)0.0440 (7)0.0417 (7)0.0175 (6)0.0092 (5)0.0090 (5)
Geometric parameters (Å, º) top
C1—C21.364 (2)C7—H7A0.9700
C1—C11A1.413 (2)C7—H7B0.9700
C1—H10.9300C8—C91.518 (3)
C2—C31.405 (3)C8—H8B0.9700
C2—H20.9300C8—H8A0.9700
C3—C41.361 (2)C9—C101.543 (2)
C3—H30.9300C9—H9B0.9700
C4—C4A1.413 (2)C9—H9A0.9700
C4—H40.9300C10—C10A1.508 (2)
C4A—N51.3680 (19)C10—H10B0.9700
C4A—C11A1.417 (2)C10—H10A0.9700
C5A—N51.3169 (19)C10A—C111.372 (2)
C5A—C10A1.432 (2)C11—C11A1.420 (2)
C5A—C61.508 (2)C11—Cl11.7485 (15)
C6—C71.537 (2)C8—H8A0.9700
C6—H6A0.9700C7—H7A0.9700
C6—H6B0.9700C7—H7B0.9700
C7—C81.515 (3)
C2—C1—C11A120.61 (15)H7A—C7—H7B107.5
C2—C1—H1119.7C7—C8—C9115.18 (15)
C11A—C1—H1119.7C7—C8—H8B108.5
C1—C2—C3120.58 (15)C9—C8—H8B108.5
C1—C2—H2119.7C7—C8—H8A108.5
C3—C2—H2119.7C9—C8—H8A108.5
C4—C3—C2120.24 (16)H8B—C8—H8A107.5
C4—C3—H3119.9C8—C9—C10114.14 (16)
C2—C3—H3119.9C8—C9—H9B108.7
C3—C4—C4A120.70 (15)C10—C9—H9B108.7
C3—C4—H4119.7C8—C9—H9A108.7
C4A—C4—H4119.7C10—C9—H9A108.7
N5—C4A—C4118.09 (13)H9B—C9—H9A107.6
N5—C4A—C11A122.82 (13)C10A—C10—C9113.83 (14)
C4—C4A—C11A119.09 (14)C10A—C10—H10B108.8
N5—C5A—C10A124.20 (13)C9—C10—H10B108.8
N5—C5A—C6115.23 (14)C10A—C10—H10A108.8
C10A—C5A—C6120.57 (14)C9—C10—H10A108.8
C5A—C6—C7114.31 (14)H10B—C10—H10A107.7
C5A—C6—H6A108.7C11—C10A—C5A116.21 (13)
C7—C6—H6A108.7C11—C10A—C10123.68 (14)
C5A—C6—H6B108.7C5A—C10A—C10120.10 (14)
C7—C6—H6B108.7C10A—C11—C11A122.32 (13)
H6A—C6—H6B107.6C10A—C11—Cl1120.60 (12)
C8—C7—C6115.12 (15)C11A—C11—Cl1117.07 (11)
C8—C7—H7A108.5C1—C11A—C4A118.76 (14)
C6—C7—H7A108.5C1—C11A—C11125.36 (14)
C8—C7—H7B108.5C4A—C11A—C11115.88 (13)
C6—C7—H7B108.5C5A—N5—C4A118.53 (13)

Experimental details

Crystal data
Chemical formulaC14H14ClN
Mr231.71
Crystal system, space groupTriclinic, P1
Temperature (K)293
a, b, c (Å)8.213 (2), 8.727 (2), 9.042 (3)
α, β, γ (°)90.50 (2), 95.32 (3), 113.86 (3)
V3)589.4 (3)
Z2
Radiation typeMo Kα
µ (mm1)0.29
Crystal size (mm)0.56 × 0.44 × 0.42
Data collection
DiffractometerEnraf–Nonius CAD-4
diffractometer
Absorption correction
No. of measured, independent and
observed [I > 2σ(I)] reflections
2548, 2309, 2003
Rint0.011
(sin θ/λ)max1)0.616
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.037, 0.107, 1.08
No. of reflections2309
No. of parameters145
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)0.19, 0.20

Computer programs: CAD-4 Software (Enraf–Nonius, 1989), XCAD4 (Harms & Wocadlo, 1995), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008), ORTEP-3 (Farrugia, 1997), WinGX (Farrugia, 1999) and PLATON (Spek, 2003).

Selected bond lengths (Å) top
C1—C21.364 (2)C5A—C61.508 (2)
C1—C11A1.413 (2)C6—C71.537 (2)
C2—C31.405 (3)C7—C81.515 (3)
C3—C41.361 (2)C8—C91.518 (3)
C4—C4A1.413 (2)C9—C101.543 (2)
C4A—N51.3680 (19)C10—C10A1.508 (2)
C4A—C11A1.417 (2)C10A—C111.372 (2)
C5A—N51.3169 (19)C11—C11A1.420 (2)
C5A—C10A1.432 (2)C11—Cl11.7485 (15)
Geometric parameters (Å, °) for C—H···π interactions top
C—H···CgH···CgC···CgH···PerpC-H···Cg
C8—H8a···Cg2i2.923.797 (2)2.88151
C10—H10a···Cg2ii2.973.872 (2)2.89155
C9—H9a···Cg1i3.123.907 (3)2.91140
C7—H7a···Cg1i3.384.126 (4)3.03135
C6—H6a···Cg1ii3.493.661 (4)2.77141
Notes: Cg1 is the centroid of the pyrdine ring; Cg2 is the centroid of the phenyl ring; H···Perp is the perpendicular distance from the H atom to the quinoline plane; symmetry codes: (i) -x+1, -y+1, z; (ii) -x+1, -y, -z.
 

Subscribe to Acta Crystallographica Section C: Structural Chemistry

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow Acta Cryst. C
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds