research papers\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoFOUNDATIONS
ADVANCES
ISSN: 2053-2733

A cloud platform for atomic pair distribution function analysis: PDFitc

CROSSMARK_Color_square_no_text.svg

aDepartment of Applied Physics and Applied Mathematics, Columbia University, New York, NY 10027, USA, bDepartment of Chemistry, Columbia University, New York, NY 10027, USA, cDepartment of Chemistry and Nanoscience Center, University of Copenhagen, Copenhagen, DK 2100, Denmark, dNeutron Scattering Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA, and eCondensed Matter Physics and Materials Science Department, Brookhaven National Laboratory, Upton, NY 11973, USA
*Correspondence e-mail: long.yang@columbia.edu, sb2896@columbia.edu

Edited by A. Altomare, Institute of Crystallography - CNR, Bari, Italy (Received 3 July 2020; accepted 26 September 2020)

A cloud web platform for analysis and interpretation of atomic pair distribution function (PDF) data (PDFitc) is described. The platform is able to host applications for PDF analysis to help researchers study the local and nanoscale structure of nanostructured materials. The applications are designed to be powerful and easy to use and can, and will, be extended over time through community adoption and development. The currently available PDF analysis applications, structureMining, spacegroupMining and similarity­Mapping, are described. In the first and second the user uploads a single PDF and the application returns a list of best-fit candidate structures, and the most likely space group of the underlying structure, respectively. In the third, the user can upload a set of measured or calculated PDFs and the application returns a matrix of Pearson correlations, allowing assessment of the similarity between different data sets. structureMining is presented here as an example to show the easy-to-use workflow on PDFitc. In the future, as well as using the PDFitc applications for data analysis, it is hoped that the community will contribute their own codes and software to the platform.

1. Introduction

Much modern computing is cloud-based. When a user submits an internet search from a lightweight mobile device, it invokes a job on a high-performance computing (HPC) cluster at a remote server farm and data center. Computation is not done on the local device, but the HPC task is handled without the user even knowing. With the aid of powerful cloud computing, this job can be finished in just milliseconds (Armbrust et al., 2010[Armbrust, M., Fox, A., Griffith, R., Joseph, A. D., Katz, R., Konwinski, A., Lee, G., Patterson, D., Rabkin, A., Stoica, I. & Zaharia, M. (2010). Commun. ACM, 53, 50-58.]; Yang et al., 2017[Yang, C., Huang, Q., Li, Z., Liu, K. & Hu, F. (2017). Int. J. Digit. Earth, 10, 13-53.]; Varghese & Buyya, 2018[Varghese, B. & Buyya, R. (2018). Future Generation Computer Systems, 79, 849-861.]). The trend in the whole information technology industry, not only the leading technology companies such as Google, Amazon and Microsoft, is to switch from running programs locally to cloud-based applications, yet in the physical sciences the adoption of this technology has been slower.

Deploying applications in the cloud brings a number of additional benefits beyond the ease of use and ready access to HPC resources, such as linking software to databases to allow for machine learning and recommender systems, automated software updates without user installation, and easily supporting many different operating systems and mobile devices (Kim & Korea, 2009[Kim, W. & Korea, S. (2009). J. Object Technol. pp. 65-72.]). In the scientific research area, it seems promising to take advantage of cloud applications for data analysis programs, though this has not been widely done.

The development of a scientific technique depends on the availability of accurate, reliable, trustworthy and fast software for data analysis, and benefits from it being easy to use. For instance, in the world of structure science from diffraction data, a series of reliable data analysis programs (Larson & Von Dreele, 1994[Larson, A. C. & Von Dreele, R. B. (1994). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.]; Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]; Rodríguez-Carvajal, 1993[Rodríguez-Carvajal, J. (1993). Physica B, 192, 55-69.]; Coelho, 2007[Coelho, A. (2007). TOPAS-Academic 4.1. Coelho Software, Brisbane, Australia.]; Altomare et al., 1999[Altomare, A., Burla, M. C., Camalli, M., Cascarano, G. L., Giacovazzo, C., Guagliardi, A., Moliterni, A. G. G., Polidori, G. & Spagna, R. (1999). J. Appl. Cryst. 32, 115-119.]) have easy-to-use graphical user interfaces (GUIs) (Toby, 2001[Toby, B. H. (2001). J. Appl. Cryst. 34, 210-213.]; Toby & Von Dreele, 2013[Toby, B. H. & Von Dreele, R. B. (2013). J. Appl. Cryst. 46, 544-549.]; Pape & Schneider, 2004[Pape, T. & Schneider, T. R. (2004). J. Appl. Cryst. 37, 843-844.]; Roisnel & Rodríquez-Carvajal, 2001[Roisnel, T. & Rodríquez-Carvajal, J. (2001). Mater. Sci. Forum, 378-381, 118-123.]; Coelho, 2018[Coelho, A. A. (2018). J. Appl. Cryst. 51, 210-218.]; Farrugia, 1999[Farrugia, L. J. (1999). J. Appl. Cryst. 32, 837-838.]), making the diffraction technique a more widely applied tool.

The atomic pair distribution function (PDF) is a diffraction technique that goes beyond just well-ordered crystals (Egami & Billinge, 2012[Egami, T. & Billinge, S. J. L. (2012). Underneath the Bragg Peaks: Structural Analysis of Complex Materials. 2nd ed. Amsterdam: Elsevier.]; Billinge, 2019[Billinge, S. J. L. (2019). International Tables of Crystallography, edited by C. Gilmore, J. Kaduk & H. Schenk, Vol. H, pp. 649-672. Chester: International Union of Crystallography.]). It does not presume period­icity, and gives the scaled probability of finding two atoms in a material a distance r apart and is related to the density of atom pairs in the material. PDF analysis is an excellent tool for studying structures of many advanced materials, especially when they are nanostructured (Neder & Korsunskiy, 2005[Neder, R. B. & Korsunskiy, V. I. (2005). J. Phys. Condens. Mater. 17, S125.]; Young & Goodwin, 2011[Young, C. A. & Goodwin, A. L. (2011). J. Mater. Chem. 21, 6464-6476.]; Terban et al., 2017[Terban, M. W., Shi, C., Silbernagel, R., Clearfield, A. & Billinge, S. J. L. (2017). Inorg. Chem. 56, 8837-8846.]; Laveda et al., 2018[Laveda, J. V., Johnston, B., Paterson, G. W., Baker, P. J., Tucker, M. G., Playford, H. Y., Jensen, K. M. Ø., Billinge, S. J. L. & Corr, S. A. (2018). J. Mater. Chem. A, 6, 127-137.]).

The current authors have also released a number of easy-to-use software packages for analyzing PDF data, such as PDFgetX2 (Qiu et al., 2004[Qiu, X., Thompson, J. W. & Billinge, S. J. L. (2004). J. Appl. Cryst. 37, 678.]) and PDFgetX3 (Juhás et al., 2013[Juhás, P., Davis, T., Farrow, C. L. & Billinge, S. J. L. (2013). J. Appl. Cryst. 46, 560-566.]) within xPDFsuite (Yang et al., 2015[Yang, X., Juhás, P., Farrow, C. & Billinge, S. J. L. (2015). arXiv:1402.3163.]) for PDF data processing, and PDFfit2 within PDFgui (Farrow et al., 2007[Farrow, C. L., Juhás, P., Liu, J., Bryndin, D., Božin, E. S., Bloch, J., Proffen, T. & Billinge, S. J. L. (2007). J. Phys. Condens. Matter, 19, 335219.]) for structure refinements. There are some developments that have been made to provide diffraction-related calculations over the internet (Campbell et al., 2006[Campbell, B. J., Stokes, H. T., Tanner, D. E. & Hatch, D. M. (2006). J. Appl. Cryst. 39, 607-614.]; Aroyo et al., 2006a[Aroyo, M. I., Kirov, A., Capillas, C., Perez-Mato, J. M. & Wondratschek, H. (2006a). Acta Cryst. A62, 115-128.],b[Aroyo, M. I., Perez-Mato, J. M., Capillas, C., Kroumova, E., Ivantchev, S., Madariaga, G., Kirov, A. & Wondratschek, H. (2006b). Z. Kristallogr. Cryst. Mater. 221, 15-27.], 2011[Aroyo, M. I., Perez-Mato, J. M., Orobengoa, D. & Tasci, E. (2011). Bulg. Chem. Commun. 43, 183-197.]; Proffen et al., 2001[Proffen, Th., Neder, R. B. & Billinge, S. J. L. (2001). J. Appl. Cryst. 34, 767-770.]), though these are not designed specifically for PDF data analysis and predate cloud computing. Here we report the development of a new easy-to-use cloud-based platform called PDF in the cloud (PDFitc) for users to analyze and interpret their PDF data. It initially presents three analysis applications but more are planned in the future.

2. PDFitc

PDFitc is a web-based platform that hosts applications (apps) for PDF analysis to study the local structure of nanostructured materials such as crystalline powders with disorder, nanoparticles and other nanomaterials. It is designed to be free, powerful and easy to use for chemists, materials scientists, earth scientists and anyone who needs to study the structure of materials beyond the average structure.

Beyond that, we hope that it will become a platform for the PDF community to use to share PDF tips, tricks and best practice. It will also be possible for users to `publish' data sets (for example, after the accompanying manuscript has been published), thus facilitating data sharing. Over time we will incorporate new functionality in the form of new apps coming from our group. It is also our plan to be able to host apps contributed by others for the broad use of the community in such a way that, when the community uses an app, proper credit is assigned to the app developer.

Currently, it offers three useful PDF analysis applications but more will be added over time:

(i) structureMining: given a PDF, structureMining (Yang et al., 2020[Yang, L., Juhás, P., Terban, M. W., Tucker, M. G. & Billinge, S. J. L. (2020). Acta Cryst. A76, 395-409.]) will discover candidate structures and return a list of them automatically, together with initial fit parameters for further analysis in structural modeling programs such as PDFgui (Farrow et al., 2007[Farrow, C. L., Juhás, P., Liu, J., Bryndin, D., Božin, E. S., Bloch, J., Proffen, T. & Billinge, S. J. L. (2007). J. Phys. Condens. Matter, 19, 335219.]) or DiffPy-CMI (Juhás et al., 2015[Juhás, P., Farrow, C., Yang, X., Knox, K. & Billinge, S. (2015). Acta Cryst. A71, 562-568.]).

(ii) spacegroupMining: given a PDF, the app will use a pre-trained convolutional neural network to predict the most likely space group of the structure that produces the PDF (Liu et al., 2019[Liu, C.-H., Tao, Y., Hsu, D., Du, Q. & Billinge, S. J. L. (2019). Acta Cryst. A75, 633-643.]).

(iii) similarityMapping: given a set of two or more PDFs, it will return a plot of the Pearson product–momentum correlation matrix (Myers & Well, 2010[Myers, J. L. & Well, A. D. (2010). Research Design and Statistical Analysis. 3rd ed. Hillsdale: Lawrence Erlbaum Associates.]), showing the similarity between all pairs of PDFs in the set. Users may use this to find and flag outliers in a large data set, to classify distinct PDFs into subsets, and to find things of interest such as variations in phase composition in time or space (Jacques et al., 2013[Jacques, S. D. M., Di Michiel, M., Kimber, S. A. J., Yang, X., Cernik, R. J., Beale, A. M. & Billinge, S. J. L. (2013). Nat. Commun. 4, 2536.]; Jensen et al., 2015[Jensen, K. M. Ø., Yang, X., Laveda, J. V., Zeier, W. G., See, K. A., Michiel, M. D., Melot, B. C., Corr, S. A. & Billinge, S. J. L. (2015). J. Electrochem. Soc. 162, A1310-A1314.]; Terban et al., 2016[Terban, M. W., Dabbous, R., Debellis, A. D., Pöselt, E. & Billinge, S. J. L. (2016). Macromolecules, 49, 7350-7358.]).

The web services make use of the PDF modeling program DiffPy-CMI (Juhás et al., 2015[Juhás, P., Farrow, C., Yang, X., Knox, K. & Billinge, S. (2015). Acta Cryst. A71, 562-568.]) and other Python packages such as TensorFlow (Abadi et al., 2016[Abadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., Devin, M., Ghemawat, S., Irving, G., Isard, M., Kudlur, M., Levenberg, J., Monga, R., Moore, S., Murray, D. G., Steiner, B., Tucker, P., Vasudevan, V., Warden, P., Wicke, M., Yu, Y. & Zheng, X. (2016). Proceedings of the 12th USENIX Symposium on Operating Systems Design and Implementation (OSDI 16), 2-4 November 2016, Savannah, Georgia, USA, pp. 265-283. Savannah, Georgia, USA: USENIX Association. https://www.usenix.org/conference/osdi16/technical-sessions/presentation/abadi.]) and SciPy.stats (Jones et al., 2001[Jones, E., Oliphant, T. & Peterson, P. (2001). SciPy: Open Source Scientific Tools for Python. https://www.scipy.org/.]). They are deployed on cloud computing services [currently the Google Cloud Platform (GCP)] using the Python Flask framework. This modular construction makes it easy to support more analysis apps in the future if they are written in Python or have a Python interface.

PDFitc is available at https://pdfitc.org. Its home web page is shown in Fig. 1[link]. The user can log in using the institution identifier account through Shibboleth (Morgan et al., 2004[Morgan, R. L., Cantor, S., Carmody, S., Hoehn, W. & Klingenstein, K. (2004). Educause Q. 27(4), 12-17.]), which allows secure access to web services from a number of academic research institutions and organizations over the world. Alternatively, the user can use a Google or GitHub account authentication through OAuth to log in. More third-party OAuth apps can be supported if necessary in the future. Once logged in, the user can use the web apps. For example, to use structureMining, the user simply uploads a PDF and gets the answer back once the calculation finishes in the cloud, as we summarize below. More detailed instructions for using PDFitc are available in an `Instructions' link in each app. We present structureMining as an illustrative example below.

[Figure 1]
Figure 1
The home web page of PDFitc.

3. PDFitc user interface using structureMining as an example

Here we use structureMining as an example to demonstrate the easy-to-use workflow on PDFitc for analyzing PDF data. After login, the user clicks on the app of choice to go to the application subpage that is shown in Fig. 2[link] for structureMining.

[Figure 2]
Figure 2
The subpage of the structureMining application.

If users are familiar with the interface they can simply browse for a .gr or similar text-format file containing a PDF on their file system and upload it. Otherwise they can follow the `Instructions' link to get more help.

We use an experimental X-ray PDF of barium titanate nanoparticles (Lombardi et al., 2019[Lombardi, J., Yang, L., Pearsall, F. A., Farahmand, N., Gai, Z., Billinge, S. J. L. & O'Brien, S. (2019). Chem. Mater. 31, 1318-1335.]) as an example data file here to illustrate the structureMining@PDFitc workflow in steps.

In the simplest usage, the user just uploads the .gr format file from their hard drive and clicks `Submit', and structureMining carries out the calculation and returns the result.

structureMining needs to know some composition information to do the calculation. If the file was generated using PDFgetX2 (Qiu et al., 2004[Qiu, X., Thompson, J. W. & Billinge, S. J. L. (2004). J. Appl. Cryst. 37, 678.]), PDFgetX3 (Juhás et al., 2013[Juhás, P., Davis, T., Farrow, C. L. & Billinge, S. J. L. (2013). J. Appl. Cryst. 46, 560-566.]), PDFgetN (Peterson et al., 2000[Peterson, P. F., Gutmann, M., Proffen, Th. & Billinge, S. J. L. (2000). J. Appl. Cryst. 33, 1192.]) or PDFgetN3 (Juhás et al., 2018[Juhás, P., Louwen, J. N., van Eijck, L., Vogt, E. T. C. & Billinge, S. J. L. (2018). J. Appl. Cryst. 51, 1492-1497.]) and the user entered the correct compositional information at the time of doing the data reduction to PDF, structureMining will find the information from the file header and use it. Files generated from other programs that contain a header with the metadata in the same form may be renamed as *.gr and used in the same way. In the future, we will also support other ways of delivering metadata such as composition.

If there are no compositional data in the header, or if they are incorrect, or if the user wants more control over the search heuristic that structureMining@PDFitc uses, the user can specify a chemical composition in the `Composition' text box. At the time of writing, the available structureMining heuristics are:

(i) Search using exact composition. Type it as, for example, BaTiO3;

(ii) Search using a complete list of the constituent elements without specifying stoichiometry, for example, Ba-Ti-O;

(iii) Search using a subset of the constituents, with one additional wild-card constituent, e.g. Ba-O-*;

(iv) Search using a subset of the constituents with two additional wild-card constituents, e.g. Ba-*-*. This pattern can be extended for any number of constituents. This information can be found under the `Instructions' link on the structureMining@PDFitc page.

Here we search for Ba-Ti-O as an example. After clicking the `Submit' button, the user will be redirected to an intermediate page, as shown in Fig. 3[link], to wait for the structureMining job to be finished in the cloud. It lists the input data filename and the found or specified chemical composition. It shows the total number of structures meeting the heuristic from all the connected structural databases and has an abort button to be used if anything is wrong in the specification or the search is taking too long and needs to be run with a tighter heuristic.

[Figure 3]
Figure 3
The intermediate waiting page after submitting a structureMining job.

Beyond composition, structureMining also takes a number of parameters it needs for the calculations from the file headers and, if it cannot find them, it uses reasonable defaults. structureMining@PDFitc allows the user to specify explicit values for any of these parameters in the `Optional Parameter' text box. The most common one that the user may want to vary is the r range of the fit (default values of 1.5 < r < 20 Å being taken by default), for example, but it is also possible to specify Qmin, Qmax, and the instrument resolution parameters Qdamp and Qbroad etc. The user can click on `Instructions' at PDFitc to see the syntax. This calculation job on 111 candidate structures took about 160 s to finish using two CPU cores on the cloud server, and could be easily speeded up by running on more cores.

When finished, structureMining@PDFitc returns a `Results' table sorted by the goodness of fit Rw value which can be toggled to a compact or expanded form, as shown in Fig. 4[link]. The compact table contains enough information to assess which structures the user may want to download for further study, with the expanded table additionally showing the most interesting starting and refined structural parameters for a slightly more in-depth review of the returned structures, such as the lattice parameters and the isotropic atomic displacement parameters for each element atom. In addition, an optional spherical particle diameter parameter can be refined if the PDF comes from nano-sized objects by having the experimenter specify an initial value (in units of ångströms). All the available optional structural parameters and their usage can be found in the `Instructions' link at structureMining@PDFitc. There is also a figure icon [Fig. 4[link](a) at the right-hand end of each row of the table] that will display the fit when clicked, e.g. Fig. 5[link] is the fit for the top-ranked structure in our Ba-Ti-O search.

[Figure 4]
Figure 4
The structureMining@PDFitc result page showing (a) the compact and (b) the expanded table forms.
[Figure 5]
Figure 5
The PDF of barium titanate nanoparticles (blue curve) with the best-fit calculated PDF (red) for the top-ranked structure from structureMining. The difference curve is shown offset below in green.

Users can then choose to download any of the found structures for further study. By clicking the download button they are provided with a zip file containing either database IDs of CIF files, or CIF files themselves (depending on licensing agreements with databases), of starting structures and refined structures, bibliographic references to the papers describing the original work where available,1 and a figure of the fit obtained by structureMining. A .csv file is also returned with all the initial and refined structural parameters from the structureMining fit.

For example, the top-ranked structure entry in our Ba-Ti-O example is the Crystallography Open Database (COD) (Gražulis et al., 2009[Gražulis, S., Chateigner, D., Downs, R. T., Yokochi, A. F. T., Quirós, M., Lutterotti, L., Manakova, E., Butkus, J., Moeck, P. & Le Bail, A. (2009). J. Appl. Cryst. 42, 726-729.]) ID 9014492 (Kwei et al., 1993[Kwei, G. H., Lawson, A. C., Billinge, S. J. L. & Cheong, S.-W. (1993). J. Phys. Chem. 97, 2368-2377.]) BaTiO3 structure with space group Amm2. This structure was also found to be the best-fit structure to the PDFs from the gel-synthesized nanoparticles in the original work (Lombardi et al., 2019[Lombardi, J., Yang, L., Pearsall, F. A., Farahmand, N., Gai, Z., Billinge, S. J. L. & O'Brien, S. (2019). Chem. Mater. 31, 1318-1335.]).

Finally, by clicking the `Download All Results' button, the user can download the results of all the structure fits found in the search for further investigation. We reiterate here that the main goal of structureMining is not to do high-quality fits, but to identify a set of candidate structures and return them for further study. It is highly likely that the quality of the fits may be improved by manual processing by the user after downloading.

4. Conclusions

A community cloud web platform, called PDF in the cloud (PDFitc), that hosts applications for pair distribution function (PDF) analysis is available at https://www.pdfitc.org. It will host an increasing number of web services over time, but currently has programs that, given just a PDF, can discover a list of likely structural candidates and predict the most likely space group of the underlying structure. It also provides a program that calculates the similarity from a set of PDFs. The user can simply upload PDFs to one of the available analysis applications and get the answer back once the calculation finishes in the cloud. The structure-finding program, structure­Mining, was used as an example application here to demonstrate the straightforward simple workflow on PDFitc.

Footnotes

1Note that the Materials Project Database does not usually return the reference to the original work but self-references instead.

Funding information

Work in the SJLB group was supported by the US National Science Foundation through grant DMREF-1534910. LY and MGT acknowledge support from the ORNL Graduate Opportunity (GO) program, which was funded by the Neutron Science Directorate, with support from the Scientific User Facilities Division, Office of Basic Energy Science, US Department of Energy (DOE). KMØJ and ETSK acknowledge funding from the European Research Council. This work is part of a project that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No. 804066).

References

First citationAbadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., Devin, M., Ghemawat, S., Irving, G., Isard, M., Kudlur, M., Levenberg, J., Monga, R., Moore, S., Murray, D. G., Steiner, B., Tucker, P., Vasudevan, V., Warden, P., Wicke, M., Yu, Y. & Zheng, X. (2016). Proceedings of the 12th USENIX Symposium on Operating Systems Design and Implementation (OSDI 16), 2–4 November 2016, Savannah, Georgia, USA, pp. 265–283. Savannah, Georgia, USA: USENIX Association. https://www.usenix.org/conference/osdi16/technical-sessions/presentation/abadiGoogle Scholar
First citationAltomare, A., Burla, M. C., Camalli, M., Cascarano, G. L., Giacovazzo, C., Guagliardi, A., Moliterni, A. G. G., Polidori, G. & Spagna, R. (1999). J. Appl. Cryst. 32, 115–119.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationArmbrust, M., Fox, A., Griffith, R., Joseph, A. D., Katz, R., Konwinski, A., Lee, G., Patterson, D., Rabkin, A., Stoica, I. & Zaharia, M. (2010). Commun. ACM, 53, 50–58.  Web of Science CrossRef Google Scholar
First citationAroyo, M. I., Kirov, A., Capillas, C., Perez-Mato, J. M. & Wondratschek, H. (2006a). Acta Cryst. A62, 115–128.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationAroyo, M. I., Perez-Mato, J. M., Capillas, C., Kroumova, E., Ivantchev, S., Madariaga, G., Kirov, A. & Wondratschek, H. (2006b). Z. Kristallogr. Cryst. Mater. 221, 15–27.  Web of Science CrossRef CAS Google Scholar
First citationAroyo, M. I., Perez-Mato, J. M., Orobengoa, D. & Tasci, E. (2011). Bulg. Chem. Commun. 43, 183–197.  CAS Google Scholar
First citationBillinge, S. J. L. (2019). International Tables of Crystallography, edited by C. Gilmore, J. Kaduk & H. Schenk, Vol. H, pp. 649–672. Chester: International Union of Crystallography.  Google Scholar
First citationCampbell, B. J., Stokes, H. T., Tanner, D. E. & Hatch, D. M. (2006). J. Appl. Cryst. 39, 607–614.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationCoelho, A. (2007). TOPAS-Academic 4.1. Coelho Software, Brisbane, Australia.  Google Scholar
First citationCoelho, A. A. (2018). J. Appl. Cryst. 51, 210–218.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationEgami, T. & Billinge, S. J. L. (2012). Underneath the Bragg Peaks: Structural Analysis of Complex Materials. 2nd ed. Amsterdam: Elsevier.  Google Scholar
First citationFarrow, C. L., Juhás, P., Liu, J., Bryndin, D., Božin, E. S., Bloch, J., Proffen, T. & Billinge, S. J. L. (2007). J. Phys. Condens. Matter, 19, 335219.  Web of Science CrossRef PubMed Google Scholar
First citationFarrugia, L. J. (1999). J. Appl. Cryst. 32, 837–838.  CrossRef CAS IUCr Journals Google Scholar
First citationGražulis, S., Chateigner, D., Downs, R. T., Yokochi, A. F. T., Quirós, M., Lutterotti, L., Manakova, E., Butkus, J., Moeck, P. & Le Bail, A. (2009). J. Appl. Cryst. 42, 726–729.  Web of Science CrossRef IUCr Journals Google Scholar
First citationJacques, S. D. M., Di Michiel, M., Kimber, S. A. J., Yang, X., Cernik, R. J., Beale, A. M. & Billinge, S. J. L. (2013). Nat. Commun. 4, 2536.  Web of Science CrossRef PubMed Google Scholar
First citationJensen, K. M. Ø., Yang, X., Laveda, J. V., Zeier, W. G., See, K. A., Michiel, M. D., Melot, B. C., Corr, S. A. & Billinge, S. J. L. (2015). J. Electrochem. Soc. 162, A1310–A1314.  Web of Science CrossRef CAS Google Scholar
First citationJones, E., Oliphant, T. & Peterson, P. (2001). SciPy: Open Source Scientific Tools for Python. https://www.scipy.org/Google Scholar
First citationJuhás, P., Davis, T., Farrow, C. L. & Billinge, S. J. L. (2013). J. Appl. Cryst. 46, 560–566.  Web of Science CrossRef IUCr Journals Google Scholar
First citationJuhás, P., Farrow, C., Yang, X., Knox, K. & Billinge, S. (2015). Acta Cryst. A71, 562–568.  Web of Science CrossRef IUCr Journals Google Scholar
First citationJuhás, P., Louwen, J. N., van Eijck, L., Vogt, E. T. C. & Billinge, S. J. L. (2018). J. Appl. Cryst. 51, 1492–1497.  Web of Science CrossRef IUCr Journals Google Scholar
First citationKim, W. & Korea, S. (2009). J. Object Technol. pp. 65–72.  CrossRef Google Scholar
First citationKwei, G. H., Lawson, A. C., Billinge, S. J. L. & Cheong, S.-W. (1993). J. Phys. Chem. 97, 2368–2377.  CrossRef ICSD CAS Web of Science Google Scholar
First citationLarson, A. C. & Von Dreele, R. B. (1994). GSAS. Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA.  Google Scholar
First citationLaveda, J. V., Johnston, B., Paterson, G. W., Baker, P. J., Tucker, M. G., Playford, H. Y., Jensen, K. M. Ø., Billinge, S. J. L. & Corr, S. A. (2018). J. Mater. Chem. A, 6, 127–137.  Web of Science CrossRef CAS Google Scholar
First citationLiu, C.-H., Tao, Y., Hsu, D., Du, Q. & Billinge, S. J. L. (2019). Acta Cryst. A75, 633–643.  Web of Science CrossRef IUCr Journals Google Scholar
First citationLombardi, J., Yang, L., Pearsall, F. A., Farahmand, N., Gai, Z., Billinge, S. J. L. & O'Brien, S. (2019). Chem. Mater. 31, 1318–1335.  Web of Science CrossRef CAS Google Scholar
First citationMorgan, R. L., Cantor, S., Carmody, S., Hoehn, W. & Klingenstein, K. (2004). Educause Q. 27(4), 12–17.  Google Scholar
First citationMyers, J. L. & Well, A. D. (2010). Research Design and Statistical Analysis. 3rd ed. Hillsdale: Lawrence Erlbaum Associates.  Google Scholar
First citationNeder, R. B. & Korsunskiy, V. I. (2005). J. Phys. Condens. Mater. 17, S125.  Web of Science CrossRef Google Scholar
First citationPape, T. & Schneider, T. R. (2004). J. Appl. Cryst. 37, 843–844.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationPeterson, P. F., Gutmann, M., Proffen, Th. & Billinge, S. J. L. (2000). J. Appl. Cryst. 33, 1192.  Web of Science CrossRef IUCr Journals Google Scholar
First citationProffen, Th., Neder, R. B. & Billinge, S. J. L. (2001). J. Appl. Cryst. 34, 767–770.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationQiu, X., Thompson, J. W. & Billinge, S. J. L. (2004). J. Appl. Cryst. 37, 678.  CrossRef IUCr Journals Google Scholar
First citationRodríguez-Carvajal, J. (1993). Physica B, 192, 55–69.  CrossRef Web of Science Google Scholar
First citationRoisnel, T. & Rodríquez-Carvajal, J. (2001). Mater. Sci. Forum, 378–381, 118–123.  Web of Science CrossRef CAS Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationTerban, M. W., Dabbous, R., Debellis, A. D., Pöselt, E. & Billinge, S. J. L. (2016). Macromolecules, 49, 7350–7358.  Web of Science CrossRef CAS Google Scholar
First citationTerban, M. W., Shi, C., Silbernagel, R., Clearfield, A. & Billinge, S. J. L. (2017). Inorg. Chem. 56, 8837–8846.  Web of Science CrossRef CAS PubMed Google Scholar
First citationToby, B. H. (2001). J. Appl. Cryst. 34, 210–213.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationToby, B. H. & Von Dreele, R. B. (2013). J. Appl. Cryst. 46, 544–549.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationVarghese, B. & Buyya, R. (2018). Future Generation Computer Systems, 79, 849–861.  Web of Science CrossRef Google Scholar
First citationYang, C., Huang, Q., Li, Z., Liu, K. & Hu, F. (2017). Int. J. Digit. Earth, 10, 13–53.  Web of Science CrossRef Google Scholar
First citationYang, L., Juhás, P., Terban, M. W., Tucker, M. G. & Billinge, S. J. L. (2020). Acta Cryst. A76, 395–409.  Web of Science CrossRef IUCr Journals Google Scholar
First citationYang, X., Juhás, P., Farrow, C. & Billinge, S. J. L. (2015). arXiv:1402.3163.  Google Scholar
First citationYoung, C. A. & Goodwin, A. L. (2011). J. Mater. Chem. 21, 6464–6476.  Web of Science CrossRef CAS Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoFOUNDATIONS
ADVANCES
ISSN: 2053-2733
Follow Acta Cryst. A
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds