research papers
The structure of Serratia marcescens Lip, a membrane-bound component of the type VI secretion system
aCollege of Life Sciences, University of Dundee, Dundee DD1 5EH, Scotland
*Correspondence e-mail: w.n.hunter@dundee.ac.uk
Lip is a membrane-bound lipoprotein and a core component of the type VI secretion system found in Gram-negative bacteria. The structure of a Lip construct (residues 29–176) from Serratia marcescens (SmLip) has been determined at 1.92 Å resolution. Experimental phases were derived using a single-wavelength approach on a sample cocrystallized with iodide. The membrane localization of the native protein was confirmed. The structure is that of the globular domain lacking only the lipoprotein signal peptide and the lipidated N-terminus of the mature protein. The protein fold is dominated by an eight-stranded β-sandwich and identifies SmLip as a new member of the transthyretin family of proteins. Transthyretin and the only other member of the family fold, 5-hydroxyisourate hydrolase, form homotetramers important for their function. The of SmLip is a tetramer with 222 symmetry, but the assembly is distinct from that previously noted for the transthyretin protein family. However, structural comparisons and bacterial two-hybrid data suggest that the SmLip tetramer is not relevant to its role as a core component of the type VI secretion system, but rather reflects a propensity for SmLip to participate in protein–protein interactions. A relatively low level of sequence conservation amongst Lip homologues is noted and is restricted to parts of the structure that might be involved in interactions with physiological partners.
Keywords: β-sandwich; Gram-negative pathogens; lipoproteins; protein secretion; transthyretin; virulence.
PDB reference: Lip, 4a1r
1. Introduction
Protein secretion systems are critical to the virulence and host-interaction processes of Gram-negative pathogens. Different bacterial species possess different combinations of one or more specialized proteinaceous machines that secrete toxins, adhesins, hydrolytic enzymes and proteins able to manipulate eukaryotic signalling pathways (Gerlach & Hensel, 2007; Holland, 2010). The most recently discovered system, the type VI secretion system (T6SS), is present in many Gram-negative bacteria and is implicated in virulence in important human pathogens including Pseudomonas aeruginosa (Cascales, 2008; Filloux et al., 2008; Jani & Cotter, 2010). It has also been shown to contribute to the virulence of economically significant animal and plant pathogens (Liu et al., 2008; Blondel et al., 2010; Sarris et al., 2010). Some T6SSs appear to target other bacterial cells instead of, or in addition to, eukaryotic cells (Hood et al., 2010; MacIntyre et al., 2010; Murdoch et al., 2011). This suggests that T6SSs may contribute to allowing pathogens to proliferate in polymicrobial infection sites and/or to persist in different environmental reservoirs (Schwarz et al., 2010; Murdoch et al., 2011). Serratia marcescens is an opportunistic pathogen, a significant cause of hospital-acquired infections and an important reservoir of antibiotic-resistance determinants in the clinical environment (Hejazi & Falkiner, 1997). It is also a tractable model organism in which to dissect the structure–function relationships in the T6SS (Murdoch et al., 2011).
Studies of the T6SS have started to reveal information on the components and the biological role of this recently discovered system (Cascales, 2008; Filloux et al., 2008; Pukatzki et al., 2009; Bönemann et al., 2010). T6SSs are large multiprotein complexes encoded on variable gene clusters characterized by the presence of genes encoding 13 `core' components. These are thought to form the basic secretion apparatus, which is coupled with `accessory' components that are conserved across many or only a few systems. Key core components include the putative extracellular Hcp/VgrG assembly, which is thought to form a cell-puncturing device similar to that of bacteriophage tail structures (Pukatzki et al., 2009). There are a number of predicted cytoplasmic proteins (e.g. an ATPase called ClpV) and several inner membrane proteins (e.g. IcmF and IcmH). Additionally, and the subject of this work, the only outer membrane component reported to date is a periplasmic-facing outer membrane lipoprotein (Lip; Aschtgen et al., 2008).
Genetic studies indicate that in S. marcescens this lipoprotein (SmLip) makes an essential contribution to the basic function of the T6SS and to T6SS-dependent antibacterial killing activity (Murdoch et al., 2011). We now report the high-resolution structure of SmLip determined following phase determination using single-wavelength (SAD) measurements based on the scattering properties of iodide ions. The localization of the protein in S. marcescens itself and bacterial two-hybrid data are reported to investigate the propensity for self-association. The structure reveals a remarkable similarity to transthyretin, a vertebrate hormone-distribution protein, and comparisons suggest which parts of SmLip may be involved in protein–protein interactions with partner components of the T6SS.
2. Methods
2.1. Protein expression and purification
The S. marcescens lip gene (SMA2252; Murdoch et al., 2011) encoding amino-acid residues 30–176 was amplified from genomic DNA (strain Db10) using the forward primer 5′-catatgGCCAAAAGCGTGCCGTCGCGTTACAG-3′ and the reverse primer 5′-ggatccTCAGTCGACCTTTTTTACGGGGCGCAGGC-3′ (the lower-case sequences correspond to the NdeI/BamHI restriction sites used for cloning). The PCR product was ligated into PCR-BluntII-TOPO using the Zero Blunt TOPO Cloning Kit (Invitrogen) and then cloned into a pET15b (Novagen) cloning vector modified to encode a tobacco etch virus (TEV) protease cleavage site in place of the thrombin protease cleavage site. The construct was verified by DNA sequencing (DNA Sequencing Unit, University of Dundee).
The recombinant protein was produced in Escherichia coli BL21 (DE3) pLysS cells (Stratagene). Cultures were grown for 3 h at 310 K in auto-induction medium (Studier, 2005) supplemented with 50 µg l−1 carbenicillin before overnight growth at 295 K. Cells were harvested by centrifugation (3500g at 277 K for 30 min). The cell pellet was resuspended in buffer A (25 mM Tris–HCl pH 7.5, 500 mM NaCl, 20 mM imidazole pH 8.5) supplemented with an EDTA-free Protease Inhibitor Cocktail Tablet (Roche) and 0.2 mg DNase I (Sigma–Aldrich). Cells were lysed using a continuous-flow cell disrupter (Constant Systems) at 207 MPa and cell debris was removed following centrifugation (40 000g at 277 K for 30 min). SmLip was purified using nickel-affinity with a 5 ml HisTrap HP column (GE Healthcare) pre-charged with Ni2+. A step gradient of 5% buffer B (25 mM Tris–HCl pH 7.5, 500 mM NaCl, 500 mM imidazole) was used to remove histidine-rich proteins. A linear concentration gradient of imidazole from 5 to 50% buffer B was applied to elute the product, which was then dialyzed against buffer C (25 mM Tris–HCl, 250 mM NaCl pH 7.5) at 277 K overnight in the presence of His-tagged TEV protease. The resulting mixture was applied onto the HisTrap column, which bound the cleaved His tag, TEV protease and uncleaved SmLip. The SmLip sample from which the His tag had been cleaved was present in the flowthrough. Fractions were analyzed using SDS–PAGE and those containing SmLip were pooled. The protein was further purified by using a Superdex 75 26/60 column (GE Healthcare) equilibrated with buffer C on an ÄKTApurifier (GE Healthcare). The column had previously been calibrated with the molecular-weight standards blue dextran (>2000 kDa), thyroglobulin (669 kDa), ferritin (440 kDa), aldolase (158 kDa), conalbumin (75 kDa), ovalbumin (43 kDa), carbonic anhydrase (29.5 kDa), ribonuclease A (13.7 kDa) and aprotinin (6.5 kDa) (GE Healthcare; data not shown). The protein eluted as one peak of approximate mass 17 kDa, corresponding to a monomer. Fractions containing the protein were pooled and concentrated to 10 mg ml−1 using Amicon Ultra devices (Millipore) for subsequent use. The purity of the protein was confirmed by SDS–PAGE and (Fingerprint Proteomics Facility, University of Dundee). A theoretical extinction coefficient of 16 960 M−1 cm−1 at 280 nm was used to estimate the protein concentration (ProtParam; Gasteiger et al., 2005); the theoretical mass of one subunit was estimated as 16.1 kDa with a calculated of 5.4. The purified protein sample was stored at 277 K until further use.
2.2. Crystallization, data collection and structure determination
Initial crystallization screens were carried out at 293 K by the sitting-drop vapour-diffusion method in 96-well plates. This was achieved using a Phoenix liquid-handling system (Rigaku, Art Robbins Instruments) and the commercially available PEG (Qiagen) and JCSG+ (Molecular Dimensions) screens. Crystallization occurred in two conditions, which were further optimized using the hanging-drop vapour-diffusion method with drops consisting of 1 µl protein solution at 10 mg ml−1 in 25 mM Tris–HCl pH 7.5, 250 mM NaCl and 1 µl reservoir solution. The two conditions involved reservoirs consisting of 20% polyethylene glycol 3350, 200 mM KI and of 15% polyethylene glycol 3350, 200 mM NaCl. Monoclinic blocks with minimum dimensions of approximately 0.3 mm grew over 2 d and the addition of glycerol to 10% proved to be a suitable cryoprotectant.
Crystals from the iodide-containing condition were characterized first and data set I was measured in-house using a Rigaku MicroMax-007 rotating-anode X-ray generator (Cu Kα, λ = 1.541 Å) coupled to an R-AXIS IV++ image-plate detector. A crystal from the second condition was stored in liquid N2 and subsequently used to measure a high-resolution data set (data set II) on beamline ID29 at the European Synchrotron Radiation Facility (ESRF; Grenoble, France) using an ADSC Q315R detector. All data were indexed and integrated using XDS (Kabsch, 2010) and scaled using SCALA (Evans, 2006) from the CCP4 program suite (Winn et al., 2011).
Data set I was used to solve the structure by SAD methods targeting the iodides present in the crystallization conditions and to acquire a fairly complete model. The sites of potential PHENIX (Adams et al., 2010) and experimental phases were calculated using Phaser (McCoy et al., 2007). Density modification was carried out using histogram matching, averaging on the basis of (NCS), and model building was carried out using RESOLVE (Terwilliger, 2003). NCS restraints were employed in the initial calculations, which were performed using REFMAC5 (Murshudov et al., 2011). Inspection of the model and the fit to electron-density and difference density maps was carried out in Coot (Emsley et al., 2010). The analysis then switched to the high-resolution synchrotron data set II when it became available and this was used to complete the MolProbity (Chen et al., 2010) was used to investigate model geometry in combination with the validation tools provided in Coot. Analyses of surface areas and interactions were made using the PISA (Krissinel & Henrick, 2007) web service and secondary-structure analysis was performed using DSSP (Kabsch & Sander, 1983). Crystallographic statistics are summarized in Table 1.
ions or atoms were identified using
‡Rwork = , where Fobs is the observed and Fcalc is the calculated §Rfree is the same as Rcryst except calculated with a subset (5%) of data that were excluded from the calculations. ¶Cruickshank (1999). ††Engh & Huber (1991). |
2.3. Bacterial two-hybrid analyses
For generation of the plasmid pSC072, the gene fragment encoding SmLip amino acids 27–176 was PCR-amplified using primers 5′-TATAgcatgcGTAAAGAGGAGGCTGCATGTCTTCCGCCAAAAGC-3′ and 5′-TATAtctagaGAGTCGACCTTTTTTACGGGGC-3′ and cloned into the vector pUT18 (Karimova et al., 2001) using SphI and XbaI restriction sites. The restriction sites are shown in lower case. For generation of another plasmid, pSC080, the same gene fragment was PCR-amplified using primers 5′-TATAggatccAATGTCTTCCGCCAAAAGCG-3′ and 5′-TATAggtaccAATGATGACGACCCCTATCGC-3′ and cloned into vector pT25 (Karimova et al., 1998) using BamHI and KpnI restriction sites (again shown in lower case). Bacterial two-hybrid analyses were performed following established protocols (Karimova et al., 1998, 2000). E. coli BTH101 was transformed with pSC072 (or pUT18 control) and pSC080 (or pT25 control) and the colour of the resulting transformants was scored on MacConkey media with 0.2% maltose (with a positive result being red). For quantitative measurement of the interaction, β-galactosidase assays were performed as described by Murdoch et al. (2011) on double-transformed BTH101 grown at 303 K in Luria–Bertani broth (LB) and permeabilized with toluene. Replicate assays were performed on independent transformants.
2.4. Cellular localization of Lip
Wild-type S. marcescens strain Db10 and the lip mutant SJC10 (Murdoch et al., 2011) were grown for 8 h at 303 K in LB. Subcellular fractionation was performed following an established method (Hatzixanthis et al., 2003). In brief, following isolation of clean supernatant by centrifugation, washed cell pellets were resuspended in 50 mM Tris–HCl pH 7.5, 40%(w/v) sucrose at 10 ml per gram of cells. EDTA was then added to 5 mM (final concentration) and lysozyme was added to 0.6 mg ml−1 before incubation at 310 K for 30 min. Sphaeroplasts were harvested by centrifugation and taken up in an equivalent volume of 50 mM Tris–HCl pH 7.5 before French pressure treatment. Following ultracentrifugation of the resultant crude extract, the isolated membranes were again taken up in an equivalent volume of 50 mM Tris–HCl pH 7.5. This protocol ensured that equivalent proportions of each cell fraction were assayed. 4 µl of each fraction was mixed with SDS sample buffer (100 mM Tris–HCl pH 6.8, 3.2% SDS, 3.2 mM EDTA, 16% glycerol, 0.2 mg ml−1 Bromophenol blue, 2.5% β-mercaptoethanol) and separated by 15% SDS–PAGE prior to anti-Lip immunoblotting. Whole-cell samples comparing wild-type versus SJC10 were prepared by resuspending cells from 100 ml culture in 100 µl SDS sample buffer and boiling for 5 min prior to loading 6 µl onto the gel. Following SDS–PAGE, proteins were electroblotted onto polyvinylidine fluoride membrane (Millipore). SmLip was detected by of the primary antibody polyclonal rabbit anti-Lip (1:4000) followed by the secondary antibody HRP-conjugated goat anti-rabbit (Thermo; 1:10000) and the use of an enhanced chemiluminescent detection kit (Millipore).
3. Results and discussion
3.1. Structure determination
Full-length SmLip consists of 176 residues. A truncated version of SmLip consisting of an N-terminal hexahistidine tag plus a TEV protease followed by residues Ala30–Asp176 was obtained in recombinant form and purified. The N-terminal 29 amino acids, which include the lipidation signal peptide and the first four residues of the mature protein, have been omitted. This sample gave monoclinic crystals. The consists of four polypeptide chains, labelled A–D, with an estimated solvent content of 45% and a VM of 2.27 Å3 Da−1.
Medium-resolution diffraction data were recorded in-house and the RESOLVE consisted of 293 residues, with a of 0.55 and Rwork and Rfree values of 46% and 49%, respectively. The first round of model building in Coot extended this to 467 residues, with a of 0.72 and Rwork and Rfree values of 33% and 37%, respectively. At this point the high-resolution synchrotron data (1.92 Å resolution) became available and were used to continue the analysis. The proceeded with the release of NCS restraints and the incorporation of water molecules, an Na+ ion, ethylene glycol and a number of side chains with dual rotamer conformations. This data set was derived from crystals grown in the presence of chloride instead of iodide. However, we did not assign any chloride ions to the structure, noting that typical water molecules occupy the previously identified iodide-binding sites. The was terminated when there were no significant changes in Rwork and Rfree and inspection of the difference density map suggested that no further corrections or additions were justified. Several dual rotamers are incorporated into the model. Disorder was evident at several positions, for example the N-terminus, where it was not possible to interpret diffuse and weak electron density. Consequently, several residues are absent from the model. Molecule A consists of residues 32–173; molecule B of residues 33–142 and 147–176; molecule C of residues 34–50, 53–143 and 147–175; and molecule D of residues 33–50 and 55–175. The geometry of the model is acceptable (Table 1).
information was used in a SAD approach to phasing. 13 potential iodide positions were identified and produced a figure of merit of 0.43 to 2.35 Å resolution. Subsequently, 12 of these positions were confirmed by with this data set. The initial model constructed in3.2. Self-association and localization in vivo
Previous work on SciN, the Lip homologue from enteroaggregative E. coli, showed that the protein is localized in the outer membrane, facing the periplasm (Aschtgen et al., 2008). Examination of the amino-acid sequence of the N-terminus of SmLip predicts that this is also an outer-membrane lipoprotein. The LipoP 1.0 algorithm (Juncker et al., 2003) predicts that SmLip has a lipoprotein signal peptide and that signal peptidase II cleavage occurs between Gly25 and Cys26, with the cysteine subsequently being lipidated. Additionally, the residue at the +2 position following cleavage is Met27 (i.e. it is not an aspartate, which directs retention in the inner membrane); therefore, SmLip should proceed to the outer membrane via the Lol system (Bos et al., 2007).
In order to investigate whether SmLip undergoes self-interaction, the bacterial two-hybrid system (Karimova et al., 2000) was utilized in E. coli. This assay involves reconstitution of adenylate cyclase activity from two non-interacting cyclase fragments, called T18 and T25, from Bordetella pertussis. The presence of cyclic AMP activates the transcription of maltose and lactose catabolic operons by E. coli. This can be detected by direct measurement of β-galactosidase activity or by using the observation that bacteria capable of fermenting maltose acidify the medium and thus generate a red colour on MacConkey–maltose indicator plates.
SmLip was introduced as both bait and prey by encoding on plasmids pUT18 and pT25, and a strong positive result was observed (Fig. 1). Mature SmLip (lacking the N-terminal signal peptide) was used for this experiment, firstly to correspond to the form of SmLip for which the structure was solved and secondly to ensure that both partners were localized together in the cytoplasm after fusion with T18 or T25. This positive result indicates that Lip does indeed self-associate within the cell and that neither localization in the outer membrane nor other components of the type VI secretion apparatus are required for self-interaction. We note, however, that this system is unable to distinguish between dimerization or higher order oligomerization.
As a control for any propensity of SmLip to form nonspecific interactions, in addition to the lack of interaction with the T18 and T25 proteins demonstrated in Fig. 1 we tested whether SmLip gave a positive bacterial two-hybrid result with several cytoplasmic components of the T6SS (with which, as a periplasmic protein, it should not interact). SmLip gave a negative result (indistinguishable from the T25 + T18 negative control) when tested against the proteins VipB, TssK and TssL (data not shown).
In order to confirm the localization of the native Lip protein in S. marcescens, we utilized an anti-Lip polyclonal antibody to probe each of the major cellular fractions in this organism. As shown in Fig. 2, native SmLip is found exclusively in the membrane fraction, confirming the predicted localization of the protein and the functionality of the signal peptide.
3.3. Overall structure
The SmLip polypeptide can be classified as a new member of the transthyretin-like superfamily and a detailed comparison will be given below. The protein displays a compact globular structure dominated by an eight-stranded β-sandwich (Fig. 3; Supplementary Fig. S11). The order of the strands is 8–7–1–4 and 6–5–2–3. There are three short α-helical segments and three 310-helix turns. The four SmLip polypeptide chains in the are similar, with the root-mean-square (r.m.s.) deviations between superimposed Cα atoms ranging from 1.3 Å (monomers A and B) to 0.8 Å (monomers A and D) with an average value of 0.95 Å.
Although a set of core conserved proteins are encoded by the T6SS gene clusters in different Gram-negative bacteria (data not shown), there is a large degree of variation in the amino-acid sequences of these proteins. Lip and its orthologues, for example, are relatively poorly conserved. Excluding the signal peptide and lipobox motif (Fig. 4), SmLip shares only about 20% sequence identity with SciN, the homologue from enteroaggregative E. coli. This increases to near 40% in comparison with the homologue from the P. aeruginosa HSI-1 T6SS. Sequence conservation is noted in loop 1, near α1 and α2, in loop 2 and in the loop 4–β6 region (Fig. 4).
An alignment of SmLip with eight orthologues (Supplementary Fig. S21) reinforces the observation of a low level of sequence identity for this protein. Excluding two residues in the lipobox motif, only six residues are strictly conserved: Asn48, Leu99-X-Pro101-Gly102, Gly120 and Ala124. All six residues appear to contribute to the conformation of specific parts of the fold (data not shown). The side chain of Asn48 accepts a hydrogen bond from the main-chain amide of Gln126, helping to define the conformation of loop 4. The Leu99-X-Pro101-Gly102 segment defines the structure of the turn after β3 leading into loop 2. Gly120 and Ala124 occur in β5 and contribute hydrogen bonds to form interactions with β2 and β6 on either side. An increase in size of the side chain at either of these positions would be likely to be disruptive to the formation of this β-sheet, which forms one side of the structure. There is no obvious hydrophobic, basic or acidic surface feature on SmLip that is likely to be conserved within the Lip proteins since the few conserved residues are mainly buried.
The information provided in §3.2 identifies that the N-terminus of the structure is placed close to the outer membrane, hence the assignment of the orientation of SmLip with respect to the outer membrane (Fig. 3). By extension, we note that the areas of SmLip in which sequence conservation is observed mainly appear to contribute to stabilizing parts of the structure that jut out into the periplasm. They may therefore serve to define the structure of parts of Lip that are responsible for interaction with other molecules in the periplasm.
3.4. The tetramer is likely to be a crystallographic artefact
Gel-filtration data acquired during purification indicated that SmLip is a monomer in solution (data not shown). In contrast, the bacterial two-hybrid data revealed a propensity for self-interaction and the is a tetramer displaying 222 point-group symmetry (Fig. 5). The accessible surface area (ASA) of the SmLip polypeptide averages out at approximately 8350 Å2; the range is from 8200 Å2 for molecule D to 8510 Å2 for molecule A. Each molecule in the interacts with two of the other three and two types of protein–protein interface are formed between molecules A–B and C–D (interface I) and between molecules A–C and B–D (interface II). The type I interface, which is larger, covers an area that is approximately 13% of the ASA of the SmLip molecule. Such coverage certainly indicates potential for a biologically relevant dimer. This interface is primarily formed by the antiparallel alignment of two β7 strands. Three aromatic residues, Phe147, Trp151 and Phe153, contribute van der Waals interactions to the association and, by virtue of their relative bulk, also to the ASA (data not shown). The type II interface covers about 6.5% of the ASA of a molecule, a level typical of the values observed simply owing to molecular packing in a This interface is formed by the antiparallel alignment of two β4 strands. The areas of SmLip involved in forming a tetramer are not conserved in the homologues from E. coli or P. aeruginosa (Fig. 4) and it is unlikely that such a tetramer is a generic feature of this lipoprotein.
The spatial placement of the N-terminal residues in the A and D are on the same side of the tetrameric assembly but are opposite to those of molecules B and C. As explained, there are no direct interactions formed between molecules A and D or molecules B and C. That the bacterial two-hybrid experiments reveal a propensity for self-interaction of the truncated protein in the cytoplasm is in one sense consistent with the of the truncated version of SmLip, which shows a tetrameric assembly containing a plausible dimer. On the other hand, the structure of the tetramer is incompatible with dimeric or tetrameric structures if the N-terminus is membrane-bound. These observations may be a result of the different concentrations and experimental conditions used. We suggest that SmLip is a membrane-bound monomer but displays a propensity to interact with itself.
is such that it is unlikely that an oligomeric assembly could form when the protein is anchored in the membrane by the lipidated Cys26 at the N-terminus. The N-termini of moleculesA reviewer commented on the possibility that the SmLip tetramer might represent an inactive or alternative state of the protein. This is an intriguing suggestion and raises questions about how conversion to an active form might occur and how the T6SS itself is regulated. We have no data to address this issue and further studies would be required to investigate such a possibility.
3.5. Comparisons with structural homologues
A search for structural neighbours in the Protein Data Bank using the PDBeFold (https://pdbe.org/fold) and ProFunc servers (Laskowski et al., 2005) gives a Z score of 6.1 with sea bream transthyretin (Eneqvist et al., 2004; PDB entry 1sn0). This matched 84 residues with an r.m.s.d. of 2.7 Å. The β-sheet structures align well (Supplementary Fig. S31). The r.m.s.d. and relatively low Z score reflect the low sequence identity shared between the two proteins of approximately 7%. Nevertheless, the structural relationship is clear and SmLip can be classed as a new member of the transthyretin-like protein family. The only other member of this protein family is 5-hydroxyisourate hydrolase (EC 3.5.2.17; Hennebry et al., 2006), an enzyme that is found only in prokaryotes, leading to the conclusion that this represents an example of divergent evolution (Hennebry, 2009). The sequence identity shared between this hydrolase and SmLip is only 6%, but the similarity in fold is evident (data not shown). We carried out further comparisons seeking to inform on Lip function.
Transthyretin binds the hormone thyroxine, self-interacts to form a tetramer and also forms a complex with retinol-binding protein (Blake et al., 1978; Wojtczak et al., 1992; Monaco et al., 1995; Zanotti et al., 2008). In common with transthyretin, SmLip forms a tetrameric assembly. However, the SmLip oligomer is distinct and an overlay of one SmLip polypeptide with a subunit from transthyretin does not produce an overlap of any of the other (data not shown).
Transthyretin forms a dimer by antiparallel self-association of the β6 and β8 strands, creating a curved eight-stranded β-sheet (Blake et al., 1978). The binding of the hormone thyroxine occurs at the tetramer interface created by the convex surfaces of two of these eight-stranded β-sheets as the protein assembles as a dimer of dimers. The thyroxine-binding residues in transthyretin are not conserved in SmLip and an overlay of an SmLip polypeptide and transthyretin subunit places the ligand-binding site on the surface of the former (Supplementary Fig. S31). It is unlikely that SmLip acts to bind hydrophobic ligands of the type that transthyretin can bind.
Transthyretin associates with retinol-binding protein using residues in three turns: two from one subunit that link β1 to β2 and β4 to β5, and one from another subunit that links β1 to β2 (Monaco et al., 1995). These parts of the transthyretin structure correspond to loops 1 and 3 of SmLip. Loop 1 is directed out from the globular fold into the periplasmic space; it is placed to interact with physiological partners and may represent a binding site for other proteins/molecules.
In a recent study of Klebsiella pneumoniae 5-hydroxyisourate hydrolase, the residues important for catalytic function were confirmed as His7, Arg41, His92 and Ser108, which together with Tyr105 form a polar and symmetric active site at a dimer interface (French & Ealick, 2011). A structure-based sequence alignment matches four of these catalytic residues (with the exception being Ser108) to Asp42, Gly105, His161 and Val172, respectively, in SmLip. The do not overlay in the vicinity of Ser108 (data not shown) and it is unlikely that Lip has any hydrolase activity.
The biological role of SmLip or its orthologues in the T6SS has yet to be unambiguously defined. Structural comparisons appear to rule out, rather than assign, a function. The propensity to self-associate using parts of the SmLip structure that will be exposed in the periplasm suggests that this protein, exploiting the lipid anchor, helps to bind and position different components of the secretion apparatus at the outer membrane. Future experiments, aided by the structural model, can address this hypothesis.
Supporting information
Supporting information file. DOI: https://doi.org/10.1107/S0907444911046300/mn5005sup1.pdf
Acknowledgements
This work was funded by the European Commission Seventh Framework Programme (FP7/2007-2013), the Aeropath project, the Wellcome Trust (grants 082596 and 083481 and a PhD studentship to GE) and a Royal Society Project Grant and a Royal Society of Edinburgh Personal Research Fellowship (SJC). We acknowledge the contribution of the Pathogen Sequencing Unit at the Wellcome Trust Sanger Institute, Hinxton, England for performing the S. marcescens Db11 genome-sequencing project.
References
Adams, P. D. et al. (2010). Acta Cryst. D66, 213–221. Web of Science CrossRef CAS IUCr Journals Google Scholar
Aschtgen, M. S., Bernard, C. S., De Bentzmann, S., Lloubès, R. & Cascales, E. (2008). J. Bacteriol. 190, 7523–7531. Web of Science CrossRef PubMed CAS Google Scholar
Blake, C. C., Geisow, M. J., Oatley, S. J., Rérat, B. & Rérat, C. (1978). J. Mol. Biol. 121, 339–356. CrossRef CAS PubMed Web of Science Google Scholar
Blondel, C. J., Yang, H.-J., Castro, B., Chiang, S., Toro, C. S., Zaldívar, M., Contreras, I., Andrews-Polymenis, H. L. & Santiviago, C. A. (2010). PLoS One, 5, e11724. Web of Science CrossRef PubMed Google Scholar
Bond, C. S. & Schüttelkopf, A. W. (2009). Acta Cryst. D65, 510–512. Web of Science CrossRef CAS IUCr Journals Google Scholar
Bönemann, G., Pietrosiuk, A. & Mogk, A. (2010). Mol. Microbiol. 76, 815–821. Web of Science PubMed Google Scholar
Bos, M. P., Robert, V. & Tommassen, J. (2007). Annu. Rev. Microbiol. 61, 191–214. Web of Science CrossRef PubMed CAS Google Scholar
Cascales, E. (2008). EMBO Rep. 9, 735–741. Web of Science CrossRef PubMed CAS Google Scholar
Chen, V. B., Arendall, W. B., Headd, J. J., Keedy, D. A., Immormino, R. M., Kapral, G. J., Murray, L. W., Richardson, J. S. & Richardson, D. C. (2010). Acta Cryst. D66, 12–21. Web of Science CrossRef CAS IUCr Journals Google Scholar
Cruickshank, D. W. J. (1999). Acta Cryst. D55, 583–601. Web of Science CrossRef CAS IUCr Journals Google Scholar
Di Tommaso, P., Moretti, S., Xenarios, I., Orobitg, M., Montanyola, A., Chang, J.-M., Taly, J.-F. & Notredame, C. (2011). Nucleic Acids Res. 39, W13–W17. Web of Science CrossRef CAS PubMed Google Scholar
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. (2010). Acta Cryst. D66, 486–501. Web of Science CrossRef CAS IUCr Journals Google Scholar
Eneqvist, T., Lundberg, E., Karlsson, A., Huang, S., Santos, C. R., Power, D. M. & Sauer-Eriksson, A. E. (2004). J. Biol. Chem. 279, 26411–26416. Web of Science CrossRef PubMed CAS Google Scholar
Engh, R. A. & Huber, R. (1991). Acta Cryst. A47, 392–400. CrossRef CAS Web of Science IUCr Journals Google Scholar
Evans, P. (2006). Acta Cryst. D62, 72–82. Web of Science CrossRef CAS IUCr Journals Google Scholar
Filloux, A., Hachani, A. & Bleves, S. (2008). Microbiology, 154, 1570–1583. Web of Science CrossRef PubMed CAS Google Scholar
French, J. B. & Ealick, S. E. (2011). Acta Cryst. D67, 671–677. Web of Science CrossRef IUCr Journals Google Scholar
Gasteiger, E., Hoogland, C., Gattiker, A., Duvaud, S., Wilkins, M. R., Appel, R. D. & Bairoch, A. (2005). The Proteomics Protocols Handbook, edited by J. M. Walker, pp. 571–607. Totowa: Humana Press. Google Scholar
Gerlach, R. G. & Hensel, M. (2007). Int. J. Med. Microbiol. 297, 401–415. Web of Science CrossRef PubMed CAS Google Scholar
Hatzixanthis, K., Palmer, T. & Sargent, F. (2003). Mol. Microbiol. 49, 1377–1390. Web of Science CrossRef PubMed CAS Google Scholar
Hejazi, A. & Falkiner, F. R. (1997). J. Med. Microbiol. 46, 903–912. CrossRef CAS PubMed Web of Science Google Scholar
Hennebry, S. C. (2009). FEBS J. 276, 5367–5379. Web of Science CrossRef PubMed CAS Google Scholar
Hennebry, S. C., Law, R. H., Richardson, S. J., Buckle, A. M. & Whisstock, J. C. (2006). J. Mol. Biol. 359, 1389–1399. Web of Science CrossRef PubMed CAS Google Scholar
Holland, I. B. (2010). Methods Mol. Biol. 619, 1–20. CrossRef CAS PubMed Google Scholar
Hood, R. D. et al. (2010). Cell Host Microbe, 7, 25–37. Web of Science CrossRef CAS PubMed Google Scholar
Jani, A. J. & Cotter, P. A. (2010). Cell Host Microbe, 8, 2–6. Web of Science CrossRef CAS PubMed Google Scholar
Juncker, A. S., Willenbrock, H., Von Heijne, G., Brunak, S., Nielsen, H. & Krogh, A. (2003). Protein Sci. 12, 1652–1662. Web of Science CrossRef PubMed CAS Google Scholar
Kabsch, W. (2010). Acta Cryst. D66, 125–132. Web of Science CrossRef CAS IUCr Journals Google Scholar
Kabsch, W. & Sander, C. (1983). Biopolymers, 22, 2577–2637. CrossRef CAS PubMed Web of Science Google Scholar
Karimova, G., Pidoux, J., Ullmann, A. & Ladant, D. (1998). Proc. Natl Acad. Sci. USA, 95, 5752–5756. Web of Science CrossRef CAS PubMed Google Scholar
Karimova, G., Ullmann, A. & Ladant, D. (2000). Methods Enzymol. 328, 59–73. Web of Science CrossRef PubMed CAS Google Scholar
Karimova, G., Ullmann, A. & Ladant, D. (2001). J. Mol. Microbiol. Biotechnol. 3, 73–82. Web of Science PubMed CAS Google Scholar
Krissinel, E. & Henrick, K. (2007). J. Mol. Biol. 372, 774–797. Web of Science CrossRef PubMed CAS Google Scholar
Laskowski, R. A., Watson, J. D. & Thornton, J. M. (2005). Nucleic Acids Res. 33, W89–W93. Web of Science CrossRef PubMed CAS Google Scholar
Liu, H., Coulthurst, S. J., Pritchard, L., Hedley, P. E., Ravensdale, M., Humphris, S., Burr, T., Takle, G., Brurberg, M. B., Birch, P. R., Salmond, G. P. & Toth, I. K. (2008). PLoS Pathog. 4, e1000093. Web of Science CrossRef PubMed Google Scholar
MacIntyre, D. L., Miyata, S. T., Kitaoka, M. & Pukatzki, S. (2010). Proc. Natl Acad. Sci. USA, 107, 19520–19524. Web of Science CrossRef CAS PubMed Google Scholar
McCoy, A. J., Grosse-Kunstleve, R. W., Adams, P. D., Winn, M. D., Storoni, L. C. & Read, R. J. (2007). J. Appl. Cryst. 40, 658–674. Web of Science CrossRef CAS IUCr Journals Google Scholar
Monaco, H. L., Rizzi, M. & Coda, A. (1995). Science, 268, 1039–1041. CrossRef CAS PubMed Web of Science Google Scholar
Murdoch, S. L., Trunk, K., English, G., Fritsch, M. J., Pourkarimi, E. & Coulthurst, S. J. (2011). J. Bacteriol. 193, 6057–6069. Web of Science CrossRef CAS PubMed Google Scholar
Murshudov, G. N., Skubák, P., Lebedev, A. A., Pannu, N. S., Steiner, R. A., Nicholls, R. A., Winn, M. D., Long, F. & Vagin, A. A. (2011). Acta Cryst. D67, 355–367. Web of Science CrossRef CAS IUCr Journals Google Scholar
Pukatzki, S., McAuley, S. B. & Miyata, S. T. (2009). Curr. Opin. Microbiol. 12, 11–17. Web of Science CrossRef PubMed CAS Google Scholar
Sarris, P. F., Skandalis, N., Kokkinidis, M. & Panopoulos, N. J. (2010). Mol. Plant Pathol. 11, 795–804. Web of Science CAS PubMed Google Scholar
Schwarz, S., Hood, R. D. & Mougous, J. D. (2010). Trends Microbiol. 18, 531–537. Web of Science CrossRef CAS PubMed Google Scholar
Studier, F. W. (2005). Protein Expr. Purif. 41, 207–234. Web of Science CrossRef PubMed CAS Google Scholar
Terwilliger, T. C. (2003). Acta Cryst. D59, 38–44. Web of Science CrossRef CAS IUCr Journals Google Scholar
Winn, M. D. et al. (2011). Acta Cryst. D67, 235–242. Web of Science CrossRef CAS IUCr Journals Google Scholar
Wojtczak, A., Luft, J. & Cody, V. (1992). J. Biol. Chem. 267, 353–357. PubMed CAS Web of Science Google Scholar
Zanotti, G., Folli, C., Cendron, L., Alfieri, B., Nishida, S. K., Gliubich, F., Pasquato, N., Negro, A. & Berni, R. (2008). FEBS J. 275, 5841–5854. Web of Science CrossRef PubMed CAS Google Scholar
This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.