organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

(Anthracen-9-ylmeth­yl)di­methyl­amine at 120 K

CROSSMARK_Color_square_no_text.svg

aDepartment of Chemistry, University of Aberdeen, Meston Walk, Aberdeen AB24 3UE, Scotland, and bFundaçâo Oswaldo Cruz, Far-Manguinhos, Rua Sizenando Nabuco 100, Manguinhos, 21041250 Rio de Janeiro, RJ, Brazil
*Correspondence e-mail: r.a.howie@abdn.ac.uk

(Received 26 April 2005; accepted 3 May 2005; online 14 May 2005)

In the structure of the title compound, C17H17N, the two mol­ecules in the asymmetric unit are confined to distinct layers, one for each type of mol­ecule. The layers differ in the orientation, relative to the edges of the unit cell, of the mol­ecules within them.

Comment

The determination of the structure of the title compound, (I)[link], reported here, follows on from the recent report of the structure of (anthracen-9-ylmeth­yl)diethyl­amine, (II) (Howie et al., 2005[Howie, R. A., Kindness, A., McKay, M. G. & Maguire, G. E. M. (2005). Acta Cryst. E61, o52-o54.]). Compound (I)[link] was unexpectedly isolated from a reaction mixture of 9-(chloro­meth­yl)anthracene and 1,4,8,11-tetra­aza­cyclo­tetra­deca­ne (cyclam) in N,N-dimethyl­formamide (DMF). Clearly, DMF had acted as a dimethyl­aminating reagent in the preparation of (I)[link]. There are scattered reports in the literature of DMF acting as a dimethyl­aminating agent in reactions with organic halides, activated for nucleophilic attack. Some examples include reactions with halohetero­arenes, such as chloro­pyridazines (Lee, Yoon & Kim, 2000[Lee, W. S., Yoon, Y. J. & Kim, S. K. (2000). J. Heterocycl. Chem. 37, 1591-1595.]) and bromo­pyridines (Watanabe et al., 1980[Watanabe, T., Tanaka, Y., Sekiya, K., Akita, Y. & Ohta A. (1980). Synthesis, pp. 39-43.]), ac­yl chlorides (Lee, Park & Yoon, 2000[Lee, W. S., Park, K. H. & Yoon, Y. J. (2000). Synth. Commun. 30, 4241-4245.]; Knunyants et al., 1966[Knunyants, Yu. A., Cheburkov, Yu. A. & Aronov, Yu. E. (1966). Izv. Akad. Nauk SSSR Ser. Khim. pp. 1038-1047.]), and (chloro­meth­yl)arenes (Min'kov & Kravtsov, 1976[Min'kov, V. A. & Kravtsov, V. S. (1976). Vopr. Khim. Khim. Tekhnol. 43, 1213-126.]). Subsequently, (I)[link] was synthesized successfully by the reaction of 9-(chloro­meth­yl)anthracene with excess Me2NH in CH2Cl2 with a procedure similar to that used for (II) (Howie et al., 2005[Howie, R. A., Kindness, A., McKay, M. G. & Maguire, G. E. M. (2005). Acta Cryst. E61, o52-o54.]), except that triethyl­amine was not added to the reaction mixture. The title compound has also been reported as the product of the Leuckart reaction between 9-anthracenecarboxaldehyde and DMF in 90% formic acid (Marcus & Fitzpatrick, 1959[Marcus, E. & Fitzpatrick, J. T. (1959). J. Org. Chem. pp. 1031-1032.]).

[Scheme 1]

The asymmetric unit of (I)[link] contains two mol­ecules, which have been labelled in an identical manner (Fig. 1[link]) and are distinguished by suffixes A and B. Leaving aside the difference in meth­yl and eth­yl N-substituents, the mol­ecular geometries of the mol­ecules A and B of (I)[link] and the mol­ecule of (II) are, as would be expected, virtually identical. For the mol­ecules of (I)[link], the C—N distances and the C—N—C angles lie in the ranges 1.454 (3)–1.470 (2) Å and 109.43 (14)–111.58 (14)°, respectively; the C—C bond lengths and inter­nal angles of the essentially planar anthracene ring systems (r.m.s. displacements for the atoms C1–C14 defining them of 0.0263 and 0.0376 Å) are in the ranges 1.352 (3)–1.446 (2) Å and 116.91 (15)–123.56 (16)°, respectively, and, finally, the C1—C15 bond length is 1.512 (2) Å in both mol­ecules. It is noticeable that the pairs of values, one from each of the mol­ecules in the bimolecular asymmetric unit from which the limiting values in the ranges given above are selected, always have the same designations, e.g. C5—C6 is the shortest bond in the anthracene ring system for both mol­ecules. This fact provides a crude indication of the close similarity of the mol­ecular geometries, as well as confirming the conformity of the labelling scheme as applied to the two mol­ecules. As shown by the torsion angles given in Table 1[link], the representative mol­ecules A and B of the asymmetric unit of (I)[link] are enantiomers. This arises purely from the choice of mol­ecules because the centrosymmetric space group requires that the structure be completely racemic. In (I)[link], the displacements of the atoms of the methyl­amine substituent from the least-squares plane defined by C1–C14, with the values for mol­ecule B in square brackets, are 0.033 (2) [0.024 (2)], 2.387 (2) [2.383 (2)], 1.201 (4) [1.067 (3)] and 1.322 (2) Å [1.257 (2) Å], respectively for the atoms in the order C15, C16, C17 and N1, and are very similar to the displacements of the corresponding atoms in the mol­ecule of (II). The anthracene moieties of mol­ecules A and B of (I)[link], as is the case for the mol­ecule of (II), are in fact very slightly U shaped, as shown by the dihedral angles between the outer and inner rings, which are in the range 1.38 (10)–2.30 (10)°. Mol­ecules A and B of (I)[link] are found in separate layers parallel to (100), which differ (Fig. 2[link]) in the orientation of the mol­ecules within the unit cell. As a consequence, the type A and type B mol­ecules differ slightly in the C—H⋯π inter­molecular inter­actions (see later) in which they participate. For the choice of origin used in the refinement of the structure, the layers of type A mol­ecules are centred on x = 0 and 1 and alternate with layers of type B mol­ecules at x = [{1\over 2}]. Contacts between the mol­ecules take the form of the C—H⋯π inter­actions given in Table 2[link] and occur entirely within the layers, as shown for type A mol­ecules in Fig. 3[link]. The connectivity within the layers in (I)[link] is identical in form to that observed in (II). However, in comparing (I)[link] and (II), the cell edges b and c are inter­changed in length, as is the orientation of the mol­ecules and therefore of the inter­molecular connectivity within the layers relative to the symmetry elements of the space group P21/c, which is common to both structures. Moreover, in (II), neighbouring layers are related by cell translation in the direction of a, whereas in (I)[link] they are not, and the cell edge a is therefore doubled in (I)[link] compared with (II). Overall, the structures of (I)[link] and (II) are closely related but the compounds are not isostructural.

[Figure 1]
Figure 1
Mol­ecule A of (I)[link], showing the labelling scheme used for both mol­ecules. Displacement ellipsoids are drawn at the 50% probability level and H atoms are shown as small circles of arbitrary radii.
[Figure 2]
Figure 2
A view of the unit cell contents of (I)[link]. Displacement ellipsoids are drawn at the 50% probability level and H atoms involved in C—H⋯π inter­actions (dashed lines) are shown as small circles of arbitrary radii. Labels indicate mol­ecule type. [Symmetry codes: (i) 1 − x, [{1\over 2}] + y, [{1\over 2}] − z; (ii) −x, [{1\over 2}] + y, [{1\over 2}] − z; (iii) −x, 1 − y, 1 − z; (iv) 1 − x, 1 − y, 1 − z; (v) x, [{1\over 2}] − y, [{1\over 2}] + z; (vi) 1 − x, [{1\over 2}] + y, [{1\over 2}] − z; (vii) 1 + x, y, z; (viii) 1 + x, [{1\over 2}] − y, [{1\over 2}] + z.]
[Figure 3]
Figure 3
A layer of type A mol­ecules of (I)[link]. Displacement ellipsoids are drawn at the 50% probability level and H atoms involved in C—H⋯π inter­actions (dashed lines) are shown as small circles of arbitrary radii. Selected atoms are labelled. [Symmetry codes: (ii) −x, [{1\over 2}] + y, [{1\over 2}] − z; (iv) 1 − x, 1 − y, 1 − z; (v) x, [{1\over 2}] − y, [{1\over 2}] + z; (ix) x, [{3\over 2}] − y, [{1\over 2}] + z; (x) x, [{3\over 2}] − y, z − [{1\over 2}]; (xi) x, [{1\over 2}] − y, z − [{1\over 2}]; (xii) −x, y − [{1\over 2}], [{1\over 2}] − z.]

Experimental

A solution of 9-chloro­methyl­anthracene and cyclam (each 2 mmol) in dry DMF (20 ml) was refluxed for 6 h. Much of the solvent was then removed under high vacuum and the residue was chromatographed on a silica column, using as eluant hexane/ethyl acetate (ethyl acetate increasing from 5 to 100%). The pure title compound was obtained from inter­mediate fractions and was recrystallized from EtOH (m. p. 348–350 K).

Crystal data
  • C17H17N

  • Mr = 235.32

  • Monoclinic, P 21 /c

  • a = 19.6924 (4) Å

  • b = 6.2383 (1) Å

  • c = 23.4415 (7) Å

  • β = 112.4743 (10)°

  • V = 2661.01 (11) Å3

  • Z = 8

  • Dx = 1.175 Mg m−3

  • Mo Kα radiation

  • Cell parameters from 28 370 reflections

  • θ = 2.9–27.5°

  • μ = 0.07 mm−1

  • T = 120 (2) K

  • Plate, pale yellow

  • 0.36 × 0.16 × 0.08 mm

Data collection
  • Enraf–Nonius KappaCCD area-detector diffractometer

  • φ and ω scans

  • Absorption correction: multi-scan(SORTAV; Blessing, 1995[Blessing, R. H. (1995). Acta Cryst. A51, 33-37.], 1997[Blessing, R. H. (1997). J. Appl. Cryst. 30, 421-426.])Tmin = 0.936, Tmax = 0.995

  • 28 370 measured reflections

  • 6034 independent reflections

  • 3938 reflections with I > 2σ(I)

  • Rint = 0.085

  • θmax = 27.5°

  • h = −23 → 25

  • k = −7 → 8

  • l = −30 → 30

Refinement
  • Refinement on F2

  • R[F2 > 2σ(F2)] = 0.055

  • wR(F2) = 0.140

  • S = 1.03

  • 6034 reflections

  • 329 parameters

  • H-atom parameters constrained

  • w = 1/[σ2(Fo2) + (0.062P)2 + 0.4189P] where P = (Fo2 + 2Fc2)/3

  • (Δ/σ)max < 0.001

  • Δρmax = 0.18 e Å−3

  • Δρmin = −0.22 e Å−3

Table 1
Selected torsion angles (°)[link]

C2A—C1A—C15A—N1A 71.54 (19)
C2B—C1B—C15B—N1B −68.23 (19)
C14A—C1A—C15A—N1A −109.24 (17)
C14B—C1B—C15B—N1B 114.10 (16)
C1A—C15A—N1A—C16A 65.22 (19)
C1B—C15B—N1B—C16B −66.82 (18)
C1A—C15A—N1A—C17A −172.65 (15)
C1B—C15B—N1B—C17B 170.50 (14)

Table 2
Geometry (Å, °) of the C—H⋯π contacts in (I)

C—H⋯Cga H⋯Cg Hperpb γc C—H⋯Cg C⋯Cg
C5B—H5BCg6i 3.114 3.087 8 125 3.745
C6A—H6ACg5ii 2.726 2.645 14 139 3.501
C6B—H6BCg2i 2.537 2.480 12 138 3.306
C8A—H8ACg1ii 2.879 2.819 12 144 3.688
C8B—H8BCg4i 2.858 2.858 1 148 3.701
C10A—H10ACg3ii 2.933 2.884 10 147 3.763
C16A—H16ACg5iii 3.176 2.850 26 128 3.861
C16B—H16DCg6iv 2.734 2.687 11 137 3.516
Notes: (a) Cgn, n = 1–6, are the centroids of the rings C1A/C2A/C7A–C9A/C14A, C1B/C2B/C7B–C9B/C14B, C2A–C7A, C2B–C7B, C9A–C14A and C9B–C14B, respectively; (b) Hperp is the perpendicular distance of the H atom from the mean plane of the ring; (c) γ is the angle at the H atom between H⋯Cg and Hperp. Symmetry codes: (i) 1-x, 1/2+y, 1/2-z; (ii) -x, 1/2+y, 1/2-z; (iii) -x, 1-y, 1-z; (iv) 1-x, 1-y, 1-z.

In the final stages of refinement, H atoms were placed in calculated positions, with C—H = 0.95, 0.98 and 0.99 Å for ar­yl, meth­yl and methyl­ene H atoms, respectively, and refined with a riding model with Uiso(H) = 1.5Ueq(C) for meth­yl H atoms and Uiso(H) = 1.2Ueq(C) otherwise. The rotational orientation of the meth­yl groups was also refined.

Data collection: COLLECT (Hooft, 1998[Hooft, R. W. W. (1998). COLLECT. Nonius BV, Delft, The Netherlands.]); cell refinement: DENZO (Otwinowski & Minor, 1997[Otwinowski, Z. & Minor, W. (1997). Methods in Enzymology, Vol. 276, Macromolecular Crystallography, Part A, edited by C. W. Carter Jr & R. M. Sweet, pp. 307-326. New York: Academic Press.]) and COLLECT; data reduction: DENZO and COLLECT; program(s) used to solve structure: SHELXS97 (Sheldrick, 1997[Sheldrick, G. M. (1997). SHELXS97 and SHELXL97. University of Göttingen, Germany.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 1997[Sheldrick, G. M. (1997). SHELXS97 and SHELXL97. University of Göttingen, Germany.]); molecular graphics: ORTEP-3 for Windows (Farrugia, 1997[Farrugia, L. J. (1997). J. Appl. Cryst. 30, 565.]); software used to prepare material for publication: SHELXL97 and PLATON (Spek, 2003[Spek, A. L. (2003). J. Appl. Cryst. 36, 7-13.]).

Supporting information


Computing details top

Data collection: COLLECT (Hooft, 1998); cell refinement: DENZO (Otwinowski & Minor, 1997) and COLLECT; data reduction: DENZO and COLLECT; program(s) used to solve structure: SHELXS97 (Sheldrick, 1997); program(s) used to refine structure: SHELXL97 (Sheldrick, 1997); molecular graphics: ORTEP-3 for Windows (Farrugia, 1997); software used to prepare material for publication: SHELXL97 and PLATON (Spek, 2003).

(Anthracen-9-ylmethyl)dimethylamine top
Crystal data top
C17H17NF(000) = 1008
Mr = 235.32Dx = 1.175 Mg m3
Monoclinic, P21/cMelting point = 348–350 K
Hall symbol: -P 2ybcMo Kα radiation, λ = 0.71073 Å
a = 19.6924 (4) ÅCell parameters from 28370 reflections
b = 6.2383 (1) Åθ = 2.9–27.5°
c = 23.4415 (7) ŵ = 0.07 mm1
β = 112.4743 (10)°T = 120 K
V = 2661.01 (11) Å3Plate, pale yellow
Z = 80.36 × 0.16 × 0.08 mm
Data collection top
Enraf–Nonius KappaCCD area-detector
diffractometer
6034 independent reflections
Radiation source: Enraf–Nonius FR591 rotating anode3938 reflections with I > 2σ(I)
10 cm confocal mirrors monochromatorRint = 0.085
Detector resolution: 9.091 pixels mm-1θmax = 27.5°, θmin = 3.2°
φ and ω scansh = 2325
Absorption correction: multi-scan
(SORTAV; Blessing, 1995, 1997)
k = 78
Tmin = 0.936, Tmax = 0.995l = 3030
28370 measured reflections
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.055Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.140H-atom parameters constrained
S = 1.03 w = 1/[σ2(Fo2) + (0.062P)2 + 0.4189P]
where P = (Fo2 + 2Fc2)/3
6034 reflections(Δ/σ)max < 0.001
329 parametersΔρmax = 0.18 e Å3
0 restraintsΔρmin = 0.22 e Å3
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Least-squares planes (x,y,z in crystal coordinates) and deviations from them (* indicates atom used to define plane)

- 0.6341 (40) x + 3.3132 (23) y + 18.6289 (52) z = 7.9481 (8)

* 0.0299 (0.0014) C1A * 0.0255 (0.0015) C2A * 0.0098 (0.0015) C3A * -0.0317 (0.0016) C4A * -0.0446 (0.0016) C5A * -0.0060 (0.0015) C6A * 0.0213 (0.0015) C7A * 0.0251 (0.0015) C8A * 0.0283 (0.0016) C9A * 0.0121 (0.0015) C10A * -0.0325 (0.0016) C11A * -0.0386 (0.0016) C12A * -0.0134 (0.0015) C13A * 0.0147 (0.0015) C14A 0.0330 (0.0022) C15A 2.3866 (0.0024) C16A 1.2006 (0.0035) C17A 1.3221 (0.0022) N1A

Rms deviation of fitted atoms = 0.0263

- 11.7825 (45) x + 3.1263 (22) y + 18.9037 (43) z = 2.1947 (26)

Angle to previous plane (with approximate e.s.d.) = 35.44 (0.03)

* 0.0433 (0.0014) C1B * 0.0372 (0.0014) C2B * 0.0182 (0.0014) C3B * -0.0396 (0.0015) C4B * -0.0617 (0.0015) C5B * -0.0248 (0.0014) C6B * 0.0301 (0.0014) C7B * 0.0484 (0.0014) C8B * 0.0379 (0.0015) C9B * 0.0106 (0.0015) C10B * -0.0318 (0.0015) C11B * -0.0564 (0.0015) C12B * -0.0300 (0.0014) C13B * 0.0186 (0.0014) C14B 0.0236 (0.0021) C15B 2.3831 (0.0023) C16B 1.0672 (0.0032) C17B 1.2574 (0.0021) N1B

Rms deviation of fitted atoms = 0.0376

- 0.1452 (139) x + 3.3520 (37) y + 18.3338 (102) z = 7.9399 (11)

Angle to previous plane (with approximate e.s.d.) = 36.78 (0.05)

* -0.0055 (0.0011) C2A * 0.0068 (0.0012) C3A * -0.0012 (0.0013) C4A * -0.0060 (0.0013) C5A * 0.0070 (0.0012) C6A * -0.0011 (0.0012) C7A

Rms deviation of fitted atoms = 0.0052

- 0.6494 (132) x + 3.3130 (35) y + 18.6357 (94) z = 7.9740 (18)

Angle to previous plane (with approximate e.s.d.) = 1.52 (0.10)

* 0.0057 (0.0011) C1A * 0.0004 (0.0011) C2A * -0.0038 (0.0012) C7A * 0.0010 (0.0012) C8A * 0.0051 (0.0012) C9A * -0.0085 (0.0011) C14A

Rms deviation of fitted atoms = 0.0049

- 1.0916 (142) x + 3.2627 (38) y + 18.9201 (99) z = 8.0600 (33)

Angle to previous plane (with approximate e.s.d.) = 1.38 (0.10)

* -0.0015 (0.0012) C9A * 0.0059 (0.0013) C10A * -0.0054 (0.0013) C11A * 0.0003 (0.0013) C12A * 0.0040 (0.0012) C13A * -0.0033 (0.0012) C14A

Rms deviation of fitted atoms = 0.0040

- 12.0887 (105) x + 3.2295 (36) y + 18.4099 (97) z = 2.0021 (58)

Angle to previous plane (with approximate e.s.d.) = 35.74 (0.07)

* -0.0085 (0.0011) C2B * 0.0070 (0.0012) C3B * -0.0009 (0.0012) C4B * -0.0037 (0.0012) C5B * 0.0018 (0.0012) C6B * 0.0043 (0.0011) C7B

Rms deviation of fitted atoms = 0.0051

- 11.7773 (98) x + 3.1106 (33) y + 18.9504 (85) z = 2.2407 (66)

Angle to previous plane (with approximate e.s.d.) = 2.30 (0.10)

* 0.0111 (0.0011) C1B * 0.0004 (0.0011) C2B * -0.0104 (0.0011) C7B * 0.0089 (0.0011) C8B * 0.0028 (0.0011) C9B * -0.0127 (0.0011) C14B

Rms deviation of fitted atoms = 0.0090

- 11.5170 (109) x + 3.0215 (38) y + 19.3350 (92) z = 2.4863 (87)

Angle to previous plane (with approximate e.s.d.) = 1.74 (0.10)

* -0.0007 (0.0011) C9B * -0.0008 (0.0012) C10B * 0.0021 (0.0013) C11B * -0.0018 (0.0013) C12B * 0.0003 (0.0012) C13B * 0.0010 (0.0011) C14B

Rms deviation of fitted atoms = 0.0013

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
N1A0.12180 (8)0.1488 (2)0.47531 (7)0.0333 (4)
C1A0.04902 (9)0.3139 (3)0.37409 (7)0.0247 (4)
C2A0.10193 (9)0.4194 (3)0.35690 (7)0.0257 (4)
C3A0.17505 (9)0.3397 (3)0.37272 (8)0.0317 (4)
H3A0.18960.21290.39680.038*
C4A0.22424 (10)0.4418 (3)0.35401 (8)0.0373 (5)
H4A0.27220.38450.36470.045*
C5A0.20426 (11)0.6328 (3)0.31867 (8)0.0385 (5)
H5A0.23880.70220.30560.046*
C6A0.13624 (11)0.7163 (3)0.30357 (8)0.0357 (5)
H6A0.12390.84590.28060.043*
C7A0.08265 (9)0.6138 (3)0.32144 (7)0.0287 (4)
C8A0.01177 (10)0.6966 (3)0.30452 (8)0.0312 (4)
H8A0.00070.82540.28120.037*
C9A0.04113 (9)0.5958 (3)0.32082 (8)0.0290 (4)
C10A0.11383 (10)0.6799 (3)0.30250 (8)0.0353 (4)
H10A0.12580.81050.28000.042*
C11A0.16610 (10)0.5773 (3)0.31658 (9)0.0396 (5)
H11A0.21440.63470.30330.048*
C12A0.14879 (10)0.3849 (3)0.35107 (9)0.0365 (4)
H12A0.18560.31470.36110.044*
C13A0.08020 (9)0.2988 (3)0.37006 (8)0.0318 (4)
H13A0.07000.16970.39330.038*
C14A0.02282 (9)0.3985 (3)0.35580 (8)0.0264 (4)
C15A0.07100 (9)0.1096 (3)0.41135 (8)0.0277 (4)
H15A0.02630.03770.41170.033*
H15B0.09470.01180.39120.033*
C16A0.08701 (12)0.2721 (3)0.50934 (9)0.0450 (5)
H16A0.12280.30040.55110.067*
H16B0.04560.19060.51170.067*
H16C0.06910.40830.48810.067*
C17A0.14812 (12)0.0559 (4)0.50609 (11)0.0544 (6)
H17A0.17180.13710.48300.082*
H17B0.10650.13820.50780.082*
H17C0.18370.02980.54810.082*
N1B0.39723 (8)0.1841 (2)0.39976 (7)0.0277 (3)
C1B0.48528 (9)0.3584 (3)0.36158 (7)0.0218 (4)
C2B0.43857 (9)0.4833 (2)0.31150 (7)0.0215 (3)
C3B0.36472 (9)0.4218 (3)0.27462 (8)0.0262 (4)
H3B0.34500.29510.28480.031*
C4B0.32186 (9)0.5414 (3)0.22507 (8)0.0294 (4)
H4B0.27330.49560.20100.035*
C5B0.34912 (9)0.7332 (3)0.20918 (8)0.0290 (4)
H5B0.31890.81520.17460.035*
C6B0.41853 (9)0.7994 (3)0.24344 (8)0.0251 (4)
H6B0.43630.92840.23260.030*
C7B0.46527 (8)0.6791 (2)0.29538 (7)0.0207 (3)
C8B0.53689 (9)0.7461 (3)0.32991 (7)0.0244 (4)
H8B0.55390.87770.31980.029*
C9B0.58410 (9)0.6246 (3)0.37888 (7)0.0238 (4)
C10B0.65828 (9)0.6913 (3)0.41263 (8)0.0304 (4)
H10B0.67510.82240.40200.036*
C11B0.70529 (10)0.5711 (3)0.45957 (9)0.0362 (5)
H11B0.75430.61820.48160.043*
C12B0.68060 (10)0.3759 (3)0.47515 (8)0.0350 (4)
H12B0.71370.29190.50780.042*
C13B0.61039 (9)0.3045 (3)0.44460 (8)0.0291 (4)
H13B0.59560.17250.45650.035*
C14B0.55856 (9)0.4252 (3)0.39490 (7)0.0231 (4)
C15B0.45519 (9)0.1515 (3)0.37601 (8)0.0261 (4)
H15C0.43540.06370.33800.031*
H15D0.49590.07020.40690.031*
C16B0.42588 (10)0.2858 (3)0.46034 (8)0.0346 (4)
H16D0.38580.30740.47480.052*
H16E0.44760.42470.45740.052*
H16F0.46350.19380.48960.052*
C17B0.36320 (12)0.0213 (3)0.40245 (10)0.0460 (5)
H17D0.32320.00110.41700.069*
H17E0.40000.11720.43100.069*
H17F0.34350.08570.36120.069*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
N1A0.0254 (8)0.0407 (9)0.0295 (8)0.0005 (7)0.0056 (6)0.0096 (7)
C1A0.0245 (9)0.0252 (9)0.0212 (8)0.0005 (7)0.0051 (7)0.0035 (7)
C2A0.0250 (9)0.0290 (9)0.0194 (8)0.0037 (7)0.0045 (7)0.0035 (7)
C3A0.0256 (10)0.0422 (11)0.0251 (9)0.0016 (8)0.0072 (7)0.0000 (8)
C4A0.0244 (10)0.0582 (13)0.0265 (9)0.0066 (9)0.0065 (8)0.0025 (8)
C5A0.0342 (11)0.0516 (12)0.0288 (10)0.0175 (9)0.0112 (8)0.0046 (9)
C6A0.0441 (12)0.0344 (10)0.0248 (9)0.0131 (8)0.0089 (9)0.0004 (8)
C7A0.0320 (10)0.0279 (9)0.0221 (8)0.0051 (7)0.0059 (7)0.0030 (7)
C8A0.0384 (11)0.0249 (9)0.0249 (9)0.0002 (8)0.0061 (8)0.0018 (7)
C9A0.0302 (10)0.0283 (9)0.0223 (8)0.0042 (7)0.0031 (7)0.0030 (7)
C10A0.0366 (11)0.0317 (10)0.0300 (10)0.0098 (8)0.0045 (8)0.0003 (8)
C11A0.0285 (11)0.0475 (12)0.0359 (11)0.0134 (9)0.0045 (9)0.0040 (9)
C12A0.0242 (10)0.0459 (11)0.0372 (10)0.0011 (8)0.0092 (8)0.0035 (9)
C13A0.0277 (10)0.0344 (10)0.0297 (9)0.0001 (8)0.0070 (8)0.0009 (8)
C14A0.0243 (9)0.0279 (9)0.0232 (8)0.0008 (7)0.0048 (7)0.0035 (7)
C15A0.0223 (9)0.0269 (9)0.0326 (9)0.0010 (7)0.0090 (7)0.0007 (7)
C16A0.0511 (13)0.0529 (13)0.0279 (10)0.0017 (10)0.0118 (9)0.0005 (9)
C17A0.0436 (13)0.0628 (15)0.0560 (14)0.0198 (11)0.0182 (11)0.0327 (12)
N1B0.0261 (8)0.0282 (8)0.0290 (8)0.0047 (6)0.0105 (6)0.0030 (6)
C1B0.0242 (9)0.0223 (8)0.0220 (8)0.0030 (6)0.0122 (7)0.0016 (6)
C2B0.0231 (9)0.0231 (8)0.0212 (8)0.0009 (6)0.0118 (7)0.0022 (6)
C3B0.0257 (9)0.0263 (9)0.0269 (9)0.0044 (7)0.0106 (7)0.0008 (7)
C4B0.0221 (9)0.0362 (10)0.0283 (9)0.0028 (7)0.0077 (7)0.0021 (7)
C5B0.0267 (10)0.0358 (10)0.0251 (9)0.0046 (7)0.0104 (8)0.0079 (7)
C6B0.0260 (9)0.0251 (9)0.0281 (9)0.0004 (7)0.0144 (7)0.0036 (7)
C7B0.0219 (8)0.0211 (8)0.0225 (8)0.0016 (6)0.0124 (7)0.0006 (6)
C8B0.0274 (9)0.0230 (8)0.0274 (9)0.0009 (7)0.0157 (7)0.0019 (7)
C9B0.0224 (9)0.0285 (9)0.0235 (8)0.0007 (7)0.0121 (7)0.0038 (7)
C10B0.0262 (9)0.0390 (10)0.0275 (9)0.0039 (8)0.0121 (8)0.0047 (8)
C11B0.0222 (10)0.0548 (12)0.0304 (10)0.0018 (8)0.0089 (8)0.0058 (9)
C12B0.0260 (10)0.0490 (12)0.0281 (9)0.0100 (8)0.0081 (8)0.0051 (8)
C13B0.0278 (10)0.0335 (10)0.0279 (9)0.0065 (7)0.0127 (8)0.0026 (7)
C14B0.0226 (9)0.0281 (9)0.0211 (8)0.0036 (7)0.0110 (7)0.0026 (6)
C15B0.0309 (10)0.0222 (9)0.0252 (8)0.0016 (7)0.0105 (7)0.0005 (7)
C16B0.0361 (11)0.0409 (11)0.0321 (10)0.0004 (8)0.0190 (8)0.0021 (8)
C17B0.0471 (13)0.0416 (12)0.0471 (12)0.0183 (10)0.0157 (10)0.0051 (10)
Geometric parameters (Å, º) top
N1A—C16A1.454 (3)N1B—C16B1.458 (2)
N1A—C17A1.461 (2)N1B—C17B1.458 (2)
N1A—C15A1.470 (2)N1B—C15B1.463 (2)
C1A—C14A1.414 (2)C1B—C14B1.416 (2)
C1A—C2A1.415 (2)C1B—C2B1.416 (2)
C1A—C15A1.512 (2)C1B—C15B1.512 (2)
C2A—C3A1.432 (2)C2B—C3B1.431 (2)
C2A—C7A1.437 (2)C2B—C7B1.436 (2)
C3A—C4A1.364 (3)C3B—C4B1.367 (2)
C3A—H3A0.9500C3B—H3B0.9500
C4A—C5A1.418 (3)C4B—C5B1.418 (2)
C4A—H4A0.9500C4B—H4B0.9500
C5A—C6A1.352 (3)C5B—C6B1.358 (2)
C5A—H5A0.9500C5B—H5B0.9500
C6A—C7A1.427 (2)C6B—C7B1.427 (2)
C6A—H6A0.9500C6B—H6B0.9500
C7A—C8A1.396 (2)C7B—C8B1.395 (2)
C8A—C9A1.390 (3)C8B—C9B1.393 (2)
C8A—H8A0.9500C8B—H8B0.9500
C9A—C10A1.428 (2)C9B—C10B1.432 (2)
C9A—C14A1.446 (2)C9B—C14B1.444 (2)
C10A—C11A1.356 (3)C10B—C11B1.361 (3)
C10A—H10A0.9500C10B—H10B0.9500
C11A—C12A1.414 (3)C11B—C12B1.410 (3)
C11A—H11A0.9500C11B—H11B0.9500
C12A—C13A1.361 (2)C12B—C13B1.366 (2)
C12A—H12A0.9500C12B—H12B0.9500
C13A—C14A1.436 (2)C13B—C14B1.434 (2)
C13A—H13A0.9500C13B—H13B0.9500
C15A—H15A0.9900C15B—H15C0.9900
C15A—H15B0.9900C15B—H15D0.9900
C16A—H16A0.9800C16B—H16D0.9800
C16A—H16B0.9800C16B—H16E0.9800
C16A—H16C0.9800C16B—H16F0.9800
C17A—H17A0.9800C17B—H17D0.9800
C17A—H17B0.9800C17B—H17E0.9800
C17A—H17C0.9800C17B—H17F0.9800
C16A—N1A—C17A110.12 (16)C16B—N1B—C17B110.70 (15)
C16A—N1A—C15A111.58 (14)C16B—N1B—C15B111.32 (13)
C17A—N1A—C15A109.45 (16)C17B—N1B—C15B109.43 (14)
C14A—C1A—C2A120.04 (15)C14B—C1B—C2B119.84 (14)
C14A—C1A—C15A121.46 (15)C14B—C1B—C15B122.14 (14)
C2A—C1A—C15A118.50 (15)C2B—C1B—C15B117.98 (14)
C1A—C2A—C3A122.84 (16)C1B—C2B—C3B122.79 (15)
C1A—C2A—C7A119.79 (15)C1B—C2B—C7B119.91 (14)
C3A—C2A—C7A117.37 (16)C3B—C2B—C7B117.29 (14)
C4A—C3A—C2A121.49 (18)C4B—C3B—C2B121.46 (16)
C4A—C3A—H3A119.3C4B—C3B—H3B119.3
C2A—C3A—H3A119.3C2B—C3B—H3B119.3
C3A—C4A—C5A120.49 (18)C3B—C4B—C5B120.73 (16)
C3A—C4A—H4A119.8C3B—C4B—H4B119.6
C5A—C4A—H4A119.8C5B—C4B—H4B119.6
C6A—C5A—C4A120.16 (18)C6B—C5B—C4B119.85 (15)
C6A—C5A—H5A119.9C6B—C5B—H5B120.1
C4A—C5A—H5A119.9C4B—C5B—H5B120.1
C5A—C6A—C7A121.36 (18)C5B—C6B—C7B121.30 (15)
C5A—C6A—H6A119.3C5B—C6B—H6B119.4
C7A—C6A—H6A119.3C7B—C6B—H6B119.4
C8A—C7A—C6A121.49 (17)C8B—C7B—C6B121.10 (14)
C8A—C7A—C2A119.38 (16)C8B—C7B—C2B119.52 (14)
C6A—C7A—C2A119.12 (16)C6B—C7B—C2B119.36 (14)
C9A—C8A—C7A121.85 (16)C9B—C8B—C7B121.55 (15)
C9A—C8A—H8A119.1C9B—C8B—H8B119.2
C7A—C8A—H8A119.1C7B—C8B—H8B119.2
C8A—C9A—C10A121.44 (17)C8B—C9B—C10B121.05 (15)
C8A—C9A—C14A119.38 (16)C8B—C9B—C14B119.59 (15)
C10A—C9A—C14A119.16 (17)C10B—C9B—C14B119.34 (15)
C11A—C10A—C9A121.36 (17)C11B—C10B—C9B121.44 (17)
C11A—C10A—H10A119.3C11B—C10B—H10B119.3
C9A—C10A—H10A119.3C9B—C10B—H10B119.3
C10A—C11A—C12A120.03 (17)C10B—C11B—C12B119.35 (17)
C10A—C11A—H11A120.0C10B—C11B—H11B120.3
C12A—C11A—H11A120.0C12B—C11B—H11B120.3
C13A—C12A—C11A120.95 (19)C13B—C12B—C11B121.73 (17)
C13A—C12A—H12A119.5C13B—C12B—H12B119.1
C11A—C12A—H12A119.5C11B—C12B—H12B119.1
C12A—C13A—C14A121.59 (18)C12B—C13B—C14B121.21 (17)
C12A—C13A—H13A119.2C12B—C13B—H13B119.4
C14A—C13A—H13A119.2C14B—C13B—H13B119.4
C1A—C14A—C13A123.56 (16)C1B—C14B—C13B123.54 (15)
C1A—C14A—C9A119.53 (16)C1B—C14B—C9B119.53 (14)
C13A—C14A—C9A116.91 (15)C13B—C14B—C9B116.92 (15)
N1A—C15A—C1A112.44 (14)N1B—C15B—C1B113.32 (13)
N1A—C15A—H15A109.1N1B—C15B—H15C108.9
C1A—C15A—H15A109.1C1B—C15B—H15C108.9
N1A—C15A—H15B109.1N1B—C15B—H15D108.9
C1A—C15A—H15B109.1C1B—C15B—H15D108.9
H15A—C15A—H15B107.8H15C—C15B—H15D107.7
N1A—C16A—H16A109.5N1B—C16B—H16D109.5
N1A—C16A—H16B109.5N1B—C16B—H16E109.5
H16A—C16A—H16B109.5H16D—C16B—H16E109.5
N1A—C16A—H16C109.5N1B—C16B—H16F109.5
H16A—C16A—H16C109.5H16D—C16B—H16F109.5
H16B—C16A—H16C109.5H16E—C16B—H16F109.5
N1A—C17A—H17A109.5N1B—C17B—H17D109.5
N1A—C17A—H17B109.5N1B—C17B—H17E109.5
H17A—C17A—H17B109.5H17D—C17B—H17E109.5
N1A—C17A—H17C109.5N1B—C17B—H17F109.5
H17A—C17A—H17C109.5H17D—C17B—H17F109.5
H17B—C17A—H17C109.5H17E—C17B—H17F109.5
C2A—C1A—C15A—N1A71.54 (19)C1A—C15A—N1A—C16A65.22 (19)
C2B—C1B—C15B—N1B68.23 (19)C1B—C15B—N1B—C16B66.82 (18)
C14A—C1A—C15A—N1A109.24 (17)C1A—C15A—N1A—C17A172.65 (15)
C14B—C1B—C15B—N1B114.10 (16)C1B—C15B—N1B—C17B170.50 (14)
Geometry (Å, °) of the C—H···π contacts in (I) top
C—H···CgaH···CgHperpbγcC—H···CgC···Cg
C5B—H5B···Cg6i3.1143.08781253.745
C6A—H6A···Cg5ii2.7262.645141393.501
C6B—H6B···Cg2i2.5372.480121383.306
C8A—H8A···Cg1ii2.8792.819121443.688
C8B—H8B···Cg4i2.8582.85811483.701
C10A—H10A···Cg3ii2.9332.884101473.763
C16A—H16A···Cg5iii3.1762.850261283.861
C16B—H16D···Cg6iv2.7342.687111373.516
Notes: (a) Cg(n), n = 1–6, are the centroids of the rings C1A/C2A/C7A–C9A/C14A, C1B/C2B/C7B–C9B/C14B, C2A–C7A, C2B–C7B, C9A–C14A and C9B–C14B, respectively; (b) Hperp is the perpendicular distance of the H atom from the mean plane of the ring; (c) γ is the angle at the H atom between H···Cg and Hperp. Symmetry codes: (i) 1-x, 1/2+y, 1/2-z; (ii) -x, 1/2+y, 1/2-z; (iii) -x, 1-y, 1-z; (iv) 1-x, 1-y, 1-z.
 

Acknowledgements

The use of the EPSRC X-ray crystallographic service at Southampton and the valuable assistance of the staff there is gratefully acknowledged.

References

First citationBlessing, R. H. (1995). Acta Cryst. A51, 33–37.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationBlessing, R. H. (1997). J. Appl. Cryst. 30, 421–426.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationFarrugia, L. J. (1997). J. Appl. Cryst. 30, 565.  CrossRef IUCr Journals Google Scholar
First citationHooft, R. W. W. (1998). COLLECT. Nonius BV, Delft, The Netherlands.  Google Scholar
First citationHowie, R. A., Kindness, A., McKay, M. G. & Maguire, G. E. M. (2005). Acta Cryst. E61, o52–o54.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationKnunyants, Yu. A., Cheburkov, Yu. A. & Aronov, Yu. E. (1966). Izv. Akad. Nauk SSSR Ser. Khim. pp. 1038–1047.  Google Scholar
First citationLee, W. S., Park, K. H. & Yoon, Y. J. (2000). Synth. Commun. 30, 4241–4245.  Web of Science CrossRef CAS Google Scholar
First citationLee, W. S., Yoon, Y. J. & Kim, S. K. (2000). J. Heterocycl. Chem. 37, 1591–1595.  CrossRef CAS Google Scholar
First citationMarcus, E. & Fitzpatrick, J. T. (1959). J. Org. Chem. pp. 1031–1032.  CrossRef Web of Science Google Scholar
First citationMin'kov, V. A. & Kravtsov, V. S. (1976). Vopr. Khim. Khim. Tekhnol. 43, 1213–126.  Google Scholar
First citationOtwinowski, Z. & Minor, W. (1997). Methods in Enzymology, Vol. 276, Macromolecular Crystallography, Part A, edited by C. W. Carter Jr & R. M. Sweet, pp. 307–326. New York: Academic Press.  Google Scholar
First citationSheldrick, G. M. (1997). SHELXS97 and SHELXL97. University of Göttingen, Germany.  Google Scholar
First citationSpek, A. L. (2003). J. Appl. Cryst. 36, 7–13.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationWatanabe, T., Tanaka, Y., Sekiya, K., Akita, Y. & Ohta A. (1980). Synthesis, pp. 39-43.  CrossRef Google Scholar

© International Union of Crystallography. Prior permission is not required to reproduce short quotations, tables and figures from this article, provided the original authors and source are cited. For more information, click here.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds