organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

Crystal structure of 1,5-di­ethyl-1H-1,5-benzodiazepine-2,4(3H,5H)-di­thione

aLaboratoire de Synthèse Organique et des Procédés Éxtraction, Université Ibn Tofail, Faculté des Sciences, 14000 Kénitra, Morocco, bLaboratoire de Synthèse Organique et Organométallique et Théorique, Université Ibn Tofail, Faculté des Sciences, 14000 Kénitra, Morocco, cLaboratoire de Physico-chimie du Solide, Université Ibn Tofail, Faculté des Sciences, 14000 Kénitra, Morocco, dCentre Universtaire d'Analyse, d'Expertise, de Transfert de Technologie et d'Incubateur, Université Ibn Tofail, BP 242, Kénitra, Morocco, eLaboratoire d'Electrochimie, Corrosion et Environnement, Université Ibn Tofail, Faculté des Sciences, 14000 Kénitra, Morocco, and fDépartement de Chimie, Université Laval, Québec, QC, G1V 0A6, Canada
*Correspondence e-mail: hafid.zouihri@gmail.com

Edited by E. R. T. Tiekink, University of Malaya, Malaysia (Received 20 December 2014; accepted 22 December 2014; online 3 January 2015)

In the title compound, C13H16N2S2, the seven-membered ring adopts a boat conformation, with the two phenyl­ene C atoms representing the stern and the methyl­ene C atom as the prow. The thione S atoms and N-bound ethyl groups lie on the opposite side of the mol­ecule to the phenyl­ene ring so that the mol­ecule approximates mirror symmetry. In the crystal, supra­molecular layers in the bc plane are sustained by a pair of C—H⋯S inter­actions to the same S atom acceptor.

1. Related literature

For the biological activity of benzodiazepine derivatives, see: Kumar et al. (2006[Kumar, R., Chaudhary, P., Nimesh, S., Verma, A. K. & Chandra, R. (2006). Green Chem. 8, 519-521.]); Swamy et al. (2008[Swamy, G. Y. S. K., Sridhar, B., Ravikumar, K., Reddy, K. S. & Reddy, V. V. N. (2008). J. Struct. Chem. 49, 775-779.]). For a related structure, see: Ourahou et al. (2010[Ourahou, S., Zouihri, H., Essassi, E. M. & Ng, S. W. (2010). Acta Cryst. E66, o1653.]).

[Scheme 1]

2. Experimental

2.1. Crystal data

  • C13H16N2S2

  • Mr = 264.40

  • Monoclinic, C 2/c

  • a = 19.8896 (2) Å

  • b = 8.8743 (1) Å

  • c = 15.5361 (2) Å

  • β = 104.087 (1)°

  • V = 2659.75 (5) Å3

  • Z = 8

  • Mo Kα radiation

  • μ = 0.38 mm−1

  • T = 150 K

  • 0.44 × 0.28 × 0.26 mm

2.2. Data collection

  • Bruker APEXII CCD area-detector diffractometer

  • Absorption correction: multi-scan (SADABS; Bruker, 2009[Bruker (2009). APEX2, SADABS and SAINT-Plus. Bruker AXS Inc., Madison, Wisconsin, USA.]) Tmin = 0.880, Tmax = 0.906

  • 14634 measured reflections

  • 3312 independent reflections

  • 2963 reflections with I > 2σ(I)

  • Rint = 0.022

2.3. Refinement

  • R[F2 > 2σ(F2)] = 0.029

  • wR(F2) = 0.083

  • S = 1.05

  • 3312 reflections

  • 154 parameters

  • H-atom parameters constrained

  • Δρmax = 0.39 e Å−3

  • Δρmin = −0.21 e Å−3

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
C3—H3⋯S1i 0.95 2.86 3.6474 (13) 141
C12—H12A⋯S1ii 0.99 2.87 3.4887 (13) 121
Symmetry codes: (i) [x, -y+2, z+{\script{1\over 2}}]; (ii) [x, -y+1, z+{\script{1\over 2}}].

Data collection: APEX2 (Bruker, 2009[Bruker (2009). APEX2, SADABS and SAINT-Plus. Bruker AXS Inc., Madison, Wisconsin, USA.]); cell refinement: SAINT-Plus (Bruker, 2009[Bruker (2009). APEX2, SADABS and SAINT-Plus. Bruker AXS Inc., Madison, Wisconsin, USA.]); data reduction: SAINT-Plus; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); molecular graphics: PLATON (Spek, 2009[Spek, A. L. (2009). Acta Cryst. D65, 148-155.]); software used to prepare material for publication: publCIF (Westrip, 2010[Westrip, S. P. (2010). J. Appl. Cryst. 43, 920-925.]).

Supporting information


Introduction top

Benzodiazepines and their derivatives are an important class of bioactive compound. They have attracted attention of chemists in the field of pharmaceuticals (Kumar et al., 2006). Some benzodiazepine derivatives have been widely used as anti-bacterial, anti-fungal, analgesic and anti-convulsant agents (Swamy et al. 2008).

Synthesis and crystallization top

In a round flask, the 1,5 dietthyl benzodiazepine-2,4-diones (2,22 g, 10 ml) and P2S5 (4.44 g, 20 ml) were mixed in aceto­nitrile (50 ml). The mixture was refluxed for 4 h. After this time, the solvent was evaporated, and the residue formed was washed with HCl (2 N) solution and distilled water, dried and recrystallised from toluene-chloro­form (90/10). After some days, pale-yellow crystals were isolated (yield: 92.1 %, 2.34 g).

Refinement top

Crystal data, data collection and structure refinement details are summarized in Table 1. H-atoms were placed in calculated positions (C—H 0.95–0.99 Å) and were included in the refinement in the riding model approximation, with Uiso(H) = 1.5Ueq(C) for methyl H atoms and 1.2Ueq(C) for all other H atoms.

Results and discussion top

The title compound crystallizes in the space group C2/c with one independent molecule in the asymmetric unit (Fig. 1). In the molecule, the diazepine ring system adopts a boat conformation with the two C1 and C6 atoms representing the stern and the C8 atom the prow with maximum deviation of 0.6626 (12)Å. The puckering parameters are: q2=0.9557 (11) Å, q3 = 0.2328 (11) Å, ϕ2 = 29.60 (7)° and ϕ3 = 128.4 (3)°. The mean plane of the diazepine ring is twisted with respect to that of the benzene ring by 32.27 (5)°. The geometric parameters of the title compound are comparable to those reported for similar structures (Ourahou et al., 2010).

Related literature top

For the biological activity of benzodiazepine derivatives, see: Kumar et al. (2006); Swamy et al. (2008). For a similar compound, see: Ourahou et al. (2010).

Computing details top

Data collection: APEX2 (Bruker, 2009); cell refinement: SAINT-Plus (Bruker, 2009); data reduction: SAINT-Plus (Bruker, 2009); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: PLATON (Spek, 2009); software used to prepare material for publication: publCIF (Westrip, 2010).

Figures top
[Figure 1] Fig. 1. The structure of the title compound, showing atom labelling and 30% probability displacement ellipsoids.
1,5-Diethyl-1H-1,5-benzodiazepine-2,4(3H,5H)-dithione top
Crystal data top
C13H16N2S2F(000) = 1120
Mr = 264.40Dx = 1.321 Mg m3
Monoclinic, C2/cMo Kα radiation, λ = 0.71073 Å
Hall symbol: -C 2ycCell parameters from 7669 reflections
a = 19.8896 (2) Åθ = 2.5–28.3°
b = 8.8743 (1) ŵ = 0.38 mm1
c = 15.5361 (2) ÅT = 150 K
β = 104.087 (1)°Block, pale-yellow
V = 2659.75 (5) Å30.44 × 0.28 × 0.26 mm
Z = 8
Data collection top
Bruker APEXII CCD area-detector
diffractometer
3312 independent reflections
Radiation source: fine-focus sealed tube2963 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.022
ϕ and ω scansθmax = 28.3°, θmin = 2.1°
Absorption correction: multi-scan
(SADABS; Bruker, 2009)
h = 2626
Tmin = 0.880, Tmax = 0.906k = 119
14634 measured reflectionsl = 2020
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.029Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.083H-atom parameters constrained
S = 1.05 w = 1/[σ2(Fo2) + (0.0451P)2 + 1.6941P]
where P = (Fo2 + 2Fc2)/3
3312 reflections(Δ/σ)max = 0.001
154 parametersΔρmax = 0.39 e Å3
0 restraintsΔρmin = 0.21 e Å3
Crystal data top
C13H16N2S2V = 2659.75 (5) Å3
Mr = 264.40Z = 8
Monoclinic, C2/cMo Kα radiation
a = 19.8896 (2) ŵ = 0.38 mm1
b = 8.8743 (1) ÅT = 150 K
c = 15.5361 (2) Å0.44 × 0.28 × 0.26 mm
β = 104.087 (1)°
Data collection top
Bruker APEXII CCD area-detector
diffractometer
3312 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2009)
2963 reflections with I > 2σ(I)
Tmin = 0.880, Tmax = 0.906Rint = 0.022
14634 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0290 restraints
wR(F2) = 0.083H-atom parameters constrained
S = 1.05Δρmax = 0.39 e Å3
3312 reflectionsΔρmin = 0.21 e Å3
154 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
S10.389586 (17)0.69948 (4)0.221477 (18)0.02667 (9)
S20.401294 (17)0.32244 (3)0.37615 (2)0.02698 (9)
N10.38266 (5)0.81930 (10)0.37619 (6)0.01868 (19)
N20.38030 (5)0.54640 (10)0.48109 (6)0.01790 (19)
C10.39904 (5)0.82159 (12)0.47124 (7)0.0180 (2)
C20.41810 (6)0.95882 (13)0.51444 (8)0.0236 (2)
H20.42221.04620.48080.028*
C30.43116 (6)0.96826 (15)0.60624 (8)0.0270 (3)
H30.44431.06180.63530.032*
C40.42499 (6)0.84098 (15)0.65542 (8)0.0258 (3)
H40.43230.84820.71800.031*
C50.40829 (6)0.70361 (14)0.61388 (7)0.0217 (2)
H50.40550.61640.64830.026*
C60.39547 (5)0.69179 (12)0.52125 (7)0.0176 (2)
C70.41267 (5)0.49358 (12)0.42024 (7)0.0183 (2)
C80.45893 (6)0.60552 (13)0.38859 (7)0.0196 (2)
H8A0.48980.65750.43960.024*
H8B0.48780.55410.35390.024*
C90.41007 (5)0.71650 (12)0.33112 (7)0.0185 (2)
C100.32917 (6)0.92648 (13)0.32921 (8)0.0255 (2)
H10A0.33800.95210.27090.031*
H10B0.33201.02050.36420.031*
C110.25747 (7)0.85946 (17)0.31559 (9)0.0341 (3)
H11A0.22300.93230.28460.051*
H11B0.24850.83530.37330.051*
H11C0.25440.76730.28010.051*
C120.32830 (6)0.45201 (14)0.50965 (8)0.0245 (2)
H12A0.32620.48140.57040.029*
H12B0.34270.34500.51120.029*
C130.25706 (7)0.46914 (18)0.44750 (10)0.0374 (3)
H13A0.22390.40540.46810.056*
H13B0.25880.43850.38750.056*
H13C0.24240.57460.44670.056*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
S10.03626 (18)0.02858 (17)0.01620 (14)0.00172 (12)0.00835 (11)0.00226 (10)
S20.03522 (18)0.01756 (15)0.02775 (16)0.00255 (11)0.00685 (12)0.00303 (10)
N10.0206 (4)0.0171 (5)0.0179 (4)0.0015 (3)0.0039 (3)0.0023 (3)
N20.0195 (4)0.0165 (4)0.0182 (4)0.0003 (3)0.0055 (3)0.0014 (3)
C10.0159 (5)0.0196 (5)0.0186 (5)0.0016 (4)0.0044 (4)0.0005 (4)
C20.0233 (5)0.0197 (5)0.0279 (6)0.0003 (4)0.0064 (4)0.0024 (4)
C30.0249 (6)0.0270 (6)0.0289 (6)0.0001 (5)0.0062 (4)0.0108 (5)
C40.0221 (5)0.0356 (7)0.0196 (5)0.0033 (5)0.0047 (4)0.0066 (5)
C50.0193 (5)0.0274 (6)0.0191 (5)0.0030 (4)0.0059 (4)0.0009 (4)
C60.0145 (5)0.0192 (5)0.0191 (5)0.0019 (4)0.0044 (4)0.0006 (4)
C70.0188 (5)0.0180 (5)0.0168 (4)0.0043 (4)0.0017 (4)0.0031 (4)
C80.0181 (5)0.0218 (5)0.0198 (5)0.0028 (4)0.0063 (4)0.0013 (4)
C90.0190 (5)0.0185 (5)0.0188 (5)0.0020 (4)0.0065 (4)0.0020 (4)
C100.0309 (6)0.0198 (5)0.0237 (5)0.0078 (5)0.0027 (4)0.0046 (4)
C110.0255 (6)0.0398 (8)0.0349 (7)0.0099 (6)0.0035 (5)0.0022 (6)
C120.0267 (6)0.0230 (6)0.0254 (5)0.0043 (5)0.0097 (4)0.0039 (4)
C130.0243 (6)0.0473 (8)0.0403 (7)0.0084 (6)0.0071 (5)0.0031 (6)
Geometric parameters (Å, º) top
S1—C91.6591 (11)C5—H50.9500
S2—C71.6587 (11)C7—C81.5150 (15)
N1—C91.3437 (15)C8—C91.5131 (15)
N1—C11.4329 (13)C8—H8A0.9900
N1—C101.4803 (14)C8—H8B0.9900
N2—C71.3506 (14)C10—C111.5118 (18)
N2—C61.4329 (14)C10—H10A0.9900
N2—C121.4805 (14)C10—H10B0.9900
C1—C21.3976 (15)C11—H11A0.9800
C1—C61.4008 (15)C11—H11B0.9800
C2—C31.3886 (17)C11—H11C0.9800
C2—H20.9500C12—C131.5157 (17)
C3—C41.3858 (19)C12—H12A0.9900
C3—H30.9500C12—H12B0.9900
C4—C51.3815 (17)C13—H13A0.9800
C4—H40.9500C13—H13B0.9800
C5—C61.4030 (15)C13—H13C0.9800
C9—N1—C1121.84 (9)C9—C8—H8B110.7
C9—N1—C10120.88 (9)C7—C8—H8B110.7
C1—N1—C10117.06 (9)H8A—C8—H8B108.8
C7—N2—C6122.11 (9)N1—C9—C8114.72 (9)
C7—N2—C12120.02 (10)N1—C9—S1124.58 (8)
C6—N2—C12117.86 (9)C8—C9—S1120.56 (8)
C2—C1—C6119.65 (10)N1—C10—C11110.88 (10)
C2—C1—N1118.31 (10)N1—C10—H10A109.5
C6—C1—N1122.03 (9)C11—C10—H10A109.5
C3—C2—C1120.45 (11)N1—C10—H10B109.5
C3—C2—H2119.8C11—C10—H10B109.5
C1—C2—H2119.8H10A—C10—H10B108.1
C4—C3—C2119.84 (11)C10—C11—H11A109.5
C4—C3—H3120.1C10—C11—H11B109.5
C2—C3—H3120.1H11A—C11—H11B109.5
C5—C4—C3120.34 (11)C10—C11—H11C109.5
C5—C4—H4119.8H11A—C11—H11C109.5
C3—C4—H4119.8H11B—C11—H11C109.5
C4—C5—C6120.55 (11)N2—C12—C13111.43 (10)
C4—C5—H5119.7N2—C12—H12A109.3
C6—C5—H5119.7C13—C12—H12A109.3
C1—C6—C5119.09 (10)N2—C12—H12B109.3
C1—C6—N2122.18 (9)C13—C12—H12B109.3
C5—C6—N2118.72 (10)H12A—C12—H12B108.0
N2—C7—C8115.48 (9)C12—C13—H13A109.5
N2—C7—S2124.50 (9)C12—C13—H13B109.5
C8—C7—S2119.93 (8)H13A—C13—H13B109.5
C9—C8—C7105.35 (9)C12—C13—H13C109.5
C9—C8—H8A110.7H13A—C13—H13C109.5
C7—C8—H8A110.7H13B—C13—H13C109.5
C9—N1—C1—C2131.40 (11)C12—N2—C6—C547.51 (13)
C10—N1—C1—C254.03 (14)C6—N2—C7—C87.63 (14)
C9—N1—C1—C649.55 (15)C12—N2—C7—C8173.63 (9)
C10—N1—C1—C6125.02 (11)C6—N2—C7—S2175.84 (8)
C6—C1—C2—C32.23 (17)C12—N2—C7—S22.90 (14)
N1—C1—C2—C3176.84 (10)N2—C7—C8—C971.66 (11)
C1—C2—C3—C40.26 (18)S2—C7—C8—C9105.04 (9)
C2—C3—C4—C52.27 (18)C1—N1—C9—C80.07 (15)
C3—C4—C5—C61.77 (17)C10—N1—C9—C8174.43 (10)
C2—C1—C6—C52.70 (16)C1—N1—C9—S1175.67 (8)
N1—C1—C6—C5176.34 (10)C10—N1—C9—S11.30 (15)
C2—C1—C6—N2176.18 (10)C7—C8—C9—N177.46 (11)
N1—C1—C6—N24.78 (16)C7—C8—C9—S198.46 (10)
C4—C5—C6—C10.73 (16)C9—N1—C10—C1187.54 (13)
C4—C5—C6—N2178.20 (10)C1—N1—C10—C1187.08 (12)
C7—N2—C6—C147.63 (15)C7—N2—C12—C1385.53 (13)
C12—N2—C6—C1133.60 (11)C6—N2—C12—C1395.68 (12)
C7—N2—C6—C5131.26 (11)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
C3—H3···S1i0.952.863.6474 (13)141
C12—H12A···S1ii0.992.873.4887 (13)121
Symmetry codes: (i) x, y+2, z+1/2; (ii) x, y+1, z+1/2.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
C3—H3···S1i0.952.863.6474 (13)141
C12—H12A···S1ii0.992.873.4887 (13)121
Symmetry codes: (i) x, y+2, z+1/2; (ii) x, y+1, z+1/2.
 

References

First citationBruker (2009). APEX2, SADABS and SAINT-Plus. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationKumar, R., Chaudhary, P., Nimesh, S., Verma, A. K. & Chandra, R. (2006). Green Chem. 8, 519–521.  CrossRef CAS Google Scholar
First citationOurahou, S., Zouihri, H., Essassi, E. M. & Ng, S. W. (2010). Acta Cryst. E66, o1653.  CSD CrossRef IUCr Journals Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSpek, A. L. (2009). Acta Cryst. D65, 148–155.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSwamy, G. Y. S. K., Sridhar, B., Ravikumar, K., Reddy, K. S. & Reddy, V. V. N. (2008). J. Struct. Chem. 49, 775–779.  CrossRef CAS Google Scholar
First citationWestrip, S. P. (2010). J. Appl. Cryst. 43, 920–925.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds