view article
Figure 5
Left: Object used in the test experiment. The steel rods appear grey; the other two rods are made of Cu. The top steel cylinder used as a cover is not shown. Right: Schematic detector layout of the SXD instrument. The square in the middle corresponds to the detector at the bottom of the instrument. Four detectors are situated and inclined 45° below the equatorial plane and six in the equatorial plane. Each detector spans approximately ±23° vertically and horizontally around the detector centre.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 39| Part 1| February 2006| Pages 82-89
https://doi.org/10.1107/S0021889805041580
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS