view article
Figure 10
Strain mapping in a repaired weld on a steam header (Bouchard et al., 2005BB2). (a) Schematic diagram of the original pipe, produced by manual arc butt welding of two ex-steam-headers. (b) Axial and (c) hoop views of the repair introduced in the weld. A section of the original weld was removed, and subsequently filled with new material. (d) Axial strain mapped on plane BB′CC′ in the heat-affected zone of the repair. The symbols indicate the locations and values of the actual measurements. The profile of the cross section was produced using a coordinate-measuring machine.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 39| Part 6| December 2006| Pages 812-825
https://doi.org/10.1107/S0021889806042245
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS