view article
Figure 6
Intensity versus azimuth angle for the 0.7 mm thick mold and various injection velocities. Curves have been progressively offset by 5 arbitrary units along the y axis with decreasing injection velocity.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 40| Part s1| April 2007| Pages s393-s396
doi:10.1107/S0021889807005080
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS