view article
Figure 3
Simulated relative transmission of the EQ-SANS optics compared with the alternative of using straight guides. For the simulations, neutrons are counted at the sample position (14 m) behind a 20 × 20 mm sample slit. A 40 × 40 mm collimation slit is located at 10 m. For the alternative straight guides, the multichannel bender is replaced with a straight guide of the same cross section. A 0.5 m gap is introduced between the guides as a place holder for a T0 chopper. For both simulations, the divergence at the source is limited to ±1°, which is enough to illuminate the guides fully at the simulated collimation length.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 43| Part 5| October 2010| Pages 1068-1077
https://doi.org/10.1107/S002188981002217X
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS