view article
Figure 6
Determination of detector parameters. Shown is the optimization error versus the eight considered parameters: the center channels of the detector and the width of the pixels in both directions, the detector tilt (azimuth and tilt angle), the detector rotation, and the offset of the outer goniometer stage. The found optimum is marked by a black circle. All other points correspond to fits that did not reach the global minimum; these were produced from various different starting parameters of the fit. Green lines are guides to the eye to visualize the minimum found in all the parameters. The points of the fits are colored to enable the identification of correlations.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 46| Part 4| July 2013| Pages 1162-1170
doi:10.1107/S0021889813017214
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS