view article

Figure 1
(a) Photograph of a machined fiber-optic taper inside mounting hardware without the bonded CCD chip. Yellow tape surrounding the taper is for the purposes of assembly and has no impact on operations. (b) Overhead light transmission through the taper. Dark areas are locations in the taper where the critical angle of internal reflection has been exceeded.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Follow J. Appl. Cryst.
Sign up for e-alerts
Follow J. Appl. Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds