view article
Figure 11
(a) The measured distribution of the (110) edge width within the b.c.c. steel of the Al–steel weld. The edge width is obtained by fitting an analytical function into the measured spectra within the 1.1 × 1.1 mm area around each 55 µm pixel of the image. (b) A 0.5 mm-wide cross section through the map of edge width.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 49| Part 4| August 2016| Pages 1130-1140
doi:10.1107/S1600576716006725
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS