view article
Figure 2
Photographs of dissimilar alloy weld samples used in this study. (a) Weld between Ti and stainless steel plates with copper filler (bottom sample) and two steel to aluminium weld samples (steel parts of the weld are visible). (b) All three weld samples installed in front of the neutron counting detector in the edge-on orientation.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 49| Part 4| August 2016| Pages 1130-1140
doi:10.1107/S1600576716006725
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS