view article
Figure 2
The TDR moderator geometry, from Zanini et al. (2014BB27). (Left) Vertical cut. (Right) Horizontal cut through the upper moderator. The cold moderator has a diameter of 16 cm and the water wings are 11 cm wide. Both are viewable over a height of 12 cm. The lower moderator assembly is identical but is rotated clockwise by 60°, so that, between the two moderator assemblies, they allow instruments in 120° wide segments on both sides of the proton beam axis.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 51| Part 2| April 2018| Pages 264-281
https://doi.org/10.1107/S1600576718002406
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS