view article

Figure 5
Schematic of microfabrication procedure (method 1) based on a closed-face lithography approach (Cabral et al., 2004BB16; Harrison et al., 2004BB37) and employed in flow-SANS (Lopez et al., 2015BB55). Photopolymerization is carried out between two ∼1 mm (boron-free) glass sheets (left). If a thin (∼100 µm) slide is used instead, for instance to enable SAXS measurements as well as SANS, the sandwich is reinforced with a thick glass plate to ensure mechanical integrity (right). The channel geometry is imposed by a photomask and development (see text for details).

Journal logoJOURNAL OF
ISSN: 1600-5767
Follow J. Appl. Cryst.
Sign up for e-alerts
Follow J. Appl. Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds