view article
Figure 6
Geometry calibration module. Peaks shown in red are clustered into multiple rings. The centers of rings are shown as small green `+' symbols, while the fitted beam center is shown as a large green `+' symbol. Detailed results of clustering and fitting are shown in the bottom-right table.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 52| Part 3| June 2019| Pages 674-682
https://doi.org/10.1107/S1600576719005363
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS