view article
Figure 4
The angular distances between lattice directions defined by four axes of HOLZ rings [schreibersite, (Fe,Ni)3P]. (a) The blue cross marks the pattern centre PC′ as initially derived using the Channel5 software (Oxford Instruments). (b) The dashed blue frame is used to calibrate the size of the Hilton net and consider the real position of PC′. The intersections of the lattice-plane traces (red lines) are used to define the correct positions of the wanted zone axes (corners of the black quadrangle). The Hilton net is aligned to enable measurement of the angle between two [uvw]i, yielding a value of ∼48°.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 53| Part 2| April 2020| Pages 435-443
https://doi.org/10.1107/S1600576720000692
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS