view article
Figure 1
Specimen A6 instrumented with thermocouples (a) before and (b) after welding. (c) A schematic representation of the TG6 specimen showing the dimensions of the plate and machined slot, and (d) the coordinate system. Start and stop refer to the start positions and the measured lines (Smith et al., 2014BB60).

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 53| Part 5| October 2020| Pages 1181-1194
https://doi.org/10.1107/S1600576720009140
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS