view article
Figure 4
Schematic view showing the influence of a curved sample surface on the analysis of the hoop stress component by means of a [ \sin^{2}\psi] measurement. D – inner diameter of the tube or borehole; d1, d2 – small and large primary beam cross sections, respectively. The hoop stress is assumed as compressive and homogeneous along the circumferential direction.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 1| February 2021| Pages 32-41
https://doi.org/10.1107/S1600576720014508
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS