view article
Figure 5
Illustration of XSA on strongly curved surfaces. (a) The angle α marks the range of `local' orientations ψl that are captured by the primary beam for some `global' tilt angle ψ adjusted with the diffractometer setup (here ψ = 0). σϕϕ denotes the hoop stress component to be analyzed. (b) Correlation between the ratio q of the beam cross section d to the hole diameter D and the scaling factor [ {{\sin\alpha} /{\alpha}}] (α to be taken in radians).

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 1| February 2021| Pages 32-41
https://doi.org/10.1107/S1600576720014508
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS