view article
Figure 3
A top-view schematic showing the experimental setup for measuring the albedo F and scattering S(θ) in Section 2[link]. The three beam-stop support frames are shown in green, with frame #1 in the beam (red). Six different samples are mounted on each frame. The tube detectors are shown in blue, with 10B-Al shielding in black. The 48-tube vSANS detector panels are labeled FL, FR, ML and MR, where the panel label names use L and R to represent the left and right panels, respectively, and F and M to represent the front and middle detector carriages, respectively. The eight-tube array used for the albedo measurements is shown facing the beam stops. The beam is offset 50 mm from the side of the eight-tube array. The three beam-stop frames are at distances L = 0.36 (as shown), 0.44 and 0.49 m from the eight-tube array.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 2| April 2021| Pages 461-472
https://doi.org/10.1107/S1600576721001084
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS