view article
Figure 3
Scheme of the AeGe cooling and liquid supply cycles. Left: solution supply is regulated by defined pressure pulses in time, produced by the digital `AND' wiring of continuous pulses with the signal according to the optical measurement of crystal plus solution (Kiefersauer et al., 2014BB15). The AeGe is constantly operating during the experiment and the deposited solution is fully nebulized instantaneously. Right: temperature regulation is achieved by cooling parts resting on the top and bottom of the AeGe, which are connected to a cooling circuit, a heater and a temperature sensor. Additional air-cooling is directed to the AeGe.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 3| June 2021| Pages 895-902
https://doi.org/10.1107/S1600576721003551
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS