view article
Figure 2
(a) Cross section of MUP B, with the SANS (2 × 5 mm rectangles) measurement positions indicated. (b) Side view of MUP B, showing the SANS measurement positions with the 5 mm high beam. (c) View of the pipe sections installed on the ZOOM instrument. The steel safety shutter behind the samples is raised during the measurements. The samples could be rotated and translated in the neutron beam. In the image the right-hand edge of the right-hand pipe section has been rotated into normal incidence to the incoming neutron beam.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 5| October 2021| Pages 1394-1402
https://doi.org/10.1107/S1600576721008311
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS