view article
Figure 7
Parameters extracted from fitting SANS data from the four measurement areas on MUP A and MUP B to equation (1)[link]: Porod exponent (top); precipitate size (middle); precipitate spacing (bottom). The horizontal error bars reflect the width of the beam. The vertical error bars represent one standard deviation on the parameters as derived from the model fit. The position of the tungsten block is marked by a grey rectangle.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 5| October 2021| Pages 1394-1402
https://doi.org/10.1107/S1600576721008311
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS