view article
Figure 8
Parameters extracted from fitting the SANS data from the high-heat-flux-exposed samples and reference pipe: Porod exponent (top); precipitate size (middle); precipitate spacing (bottom). The horizontal error bars reflect the width of the beam. The vertical error bars represent one standard deviation on the parameters as derived from the model fit. The reference data in all three orientations are plotted on the same x-axis scale for comparison, although in some cases values overlap. Filled symbols refer to the heat-flux-exposed top surface; open symbols refer to the bottom of the MUP pipe samples. The positions of the tungsten blocks are marked by grey rectangles.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 54| Part 5| October 2021| Pages 1394-1402
https://doi.org/10.1107/S1600576721008311
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS