A simple goniometer-compatible flow cell for serial synchrotron X-ray crystallography

Ghosh, S.; Zorić, D.; Dahl, P.; Bjelčić, M.; Johannesson, J.; Sandelin, E.; Borjesson, P.; Björling, A.; Banacore, A.; Edlund, P.; Aurelius, O.; Milas, M.; Nan, J.; Shilova, A.; Gonzalez, A.; Mueller, U.; Brändén, G.; Neutze, R.

doi:10.1107/S1600576723001036

Journal of Applied Crystallography Journal of Applied
Crystallography

IUCr IT WDC

home archive editors for authors for readers submit subscribe open access

view article

Figure 2
Mounting and alignment of the 3D-printed flow cell on a macromolecular crystallography beamline. (a) Flow cell mounted on the goniometer magnet and aligned with the X-ray beam at BioMAX. (b) LCP crystals of ba₃-type CcO injected into the flow cell were observed through the glass capillary using the standard alignment optics of BioMAX. (c) Design of the catcher when the goniometer allows vertical mounting from above. This catcher is mounted by sliding over the flow cell and is held in place by friction. (d) Design of the catcher when the goniometer allows vertical mounting from below. In this case the sample also flows downwards. (e) Design of the catcher when the goniometer allows horizontal mounting.

JOURNAL OF
APPLIED
CRYSTALLOGRAPHY

ISSN: 1600-5767

Volume 56| Part 2| April 2023| Pages 449-460

https://doi.org/10.1107/S1600576723001036

Open

access

Follow J. Appl. Cryst.

Search IUCr Journals		doi		Advanced search
Author		volume	page