view article
Figure 10
Example of the measurement sequence. Top: front and rear topographic surveys are carried out to infer the differential displacements. Middle: front and rear surveys are carried out to determine the surface stress induced by the Cu coating. Bottom: front and rear surveys are carried out to observe the displacements yielded by the Cu coating on the external surface of the splitter and analyser. The red lines indicate the coated surfaces. The orange marker indicates the interferometer front and rear orientations.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 56| Part 3| June 2023| Pages 716-724
https://doi.org/10.1107/S1600576723002832
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS