view article
Figure 1
Photographs showing the LabDCT implementation on a conventional tomography setup using a (a) CCD (effective width × height = 50.0 × 50.0 mm) and (b) flat panel (effective width × height = 184.9 × 233.7 mm). A pinhole is placed between the sample and the nano source, and its position is controlled by three motors. A 2 mm-thick sheet of lead, covering the footprint of the direct beam, is attached onto the detector for DCT acquisition.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 56| Part 3| June 2023| Pages 810-824
https://doi.org/10.1107/S1600576723003874
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS