Figure 5
Linearly interpolated contour plots of the laboratory XRD RS measurements on the top surface of the specimens H0° and H45° along their L and T directions. The measurements were performed pre- (average measurement error H0° ≃ 27 MPa, H45° ≃ 34 MPa) and post-removal from the build plate (average measurement error H0° ≃ 29 MPa, H45° ≃ 32 MPa). Measurement positions are highlighted by the crosses and were distributed as depicted in Fig. 2(e). 0,0 is the center of the specimen top surface. |