view article
Figure 1
Front and cross-sectional views of the lid and body parts of the sample cell. (a) Lid with an integrated prism for the ATR sampling method. 1: ZnSe prism, 2: prism support plate, 3: through holes for lid–body coupling screws. (b) Body with a recess to accommodate the sample. 1: ZnSe plate, 2: O-ring, 3: pipes for heat-transfer fluid for temperature control, 4: threaded holes for lid–body coupling screws, 5: a recess to accommodate the sample. The ZnSe prism and the ZnSe plate are fixed to the lid and the body, respectively, using polyamide resin as adhesive material. The sample is held in a recess in the body section. The O-ring between the lid and the body ensures the tightness of this space.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 56| Part 5| October 2023| Pages 1522-1527
https://doi.org/10.1107/S1600576723007744
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS