Anharmonicity and isomorphic phase transition: a multi-temperature X-ray single-crystal and powder diffraction study of 1-(2′-amino­phenyl)-2-methyl-4-nitro­imidazole

The harmonic model of atomic nuclear motions is usually enough for multipole modelling of high-resolution X-ray diffraction data; however, in some molecular crystals, such as 1-(2′-aminophenyl)-2-methyl-4-nitro-1H-imidazole [Paul, Kubicki, Jelsch et al. (2011). Acta Cryst. B67, 365–378], it may not be sufficient for a correct description of the charge-density distribution. Multipole refinement using harmonic atom vibrations does not lead to the best electron density model in this case and the so-called `shashlik-like' pattern of positive and negative residual electron density peaks is observed in the vicinity of some atoms. This slight disorder, which cannot be modelled by split atoms, was solved using third-order anharmonic nuclear motion (ANM) parameters. Multipole refinement of the experimental high-resolution X-ray diffraction data of 1-(2′-aminophenyl)-2-methyl-4-nitro-1H-imidazole at three different temperatures (10, 35 and 70 K) and a series of powder diffraction experiments (20 ≤ T ≤ 300 K) were performed to relate this anharmonicity observed for several light atoms (N atoms of amino and nitro groups, and O atoms of nitro groups) to an isomorphic phase transition reflected by a change in the b cell parameter around 65 K. The observed disorder may result from the coexistence of domains of two phases over a large temperature range, as shown by low-temperature powder diffraction.

1. Introduction

When using accurate ultra-high-resolution X-ray diffraction data, the most commonly used harmonic model of the atomic nuclear motions may not be sufficient for some molecular crystals, even for lighter atoms. Therefore, multipole refinement without modelling anharmonic nuclear motions (ANMs) does not lead to the best electron density (ED) model, as revealed by peaks and holes in residual maps; these peaks arranged in a `shashlik-like' pattern in the vicinity of the anharmonic atoms are an indicator of third-order ANMs (Herbst-Irmer et al., 2013; Meindl et al., 2010) and can be modelled by introducing Gram–Charlier or cumulant expansions (Johnson & Levy, 1974).

Despite the fact that ANMs have been previously discussed in the literature (e.g. Kuhs, 1988, 1992), their reliable separation from the static charge-density distribution parameters, disorder or librations was questioned (Mallinson et al., 1988; Restori & Schwarzenbach, 1996). Although Iversen et al. (1999) distinguished anharmonic nuclear motions from static electron density features in a thorium complex structure using extremely high-resolution (1.7 Å⁻¹) data from two very low-temperature experiments (at 9 and 27 K), Henn et al. (2010) were able to separate both contributions for lighter atoms (namely P atoms) at lower resolution (1.15 Å⁻¹) at 100 K. Birkedal et al. (2004) successfully refined the multipolar electron density of urea, while Scheins et al. (2010) showed that ANMs are necessary for the correct description of the charge density of a Zn atom. Finally, Zhurov et al. (2011) showed that neglecting ANMs in the case of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) results in unrealistic charge-density deformation and Laplacian maps in the region of the nitro group. For a similar compound, 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX), which has a slightly more compact crystal structure, the refined ANM parameters were statistically significant, however, their effect on the resulting charge-density deformation and Laplacian maps was rather negligible.

The effects related to ANMs are visible only at high-resolution data and the values representing the corresponding refined Gram–Charlier coefficients are often hardly statistically significant. Correlatively, the agreement factors do not improve noticeably upon the introduction of these new parameters. Nevertheless, such a physical model considerably reduces residual peak heights (Paul, Kubicki, Jelsch et al., 2011; see Figs. 4 and 5 therein). To avoid possible correlations between ANMs and the remaining ED parameters, the former ones should be refined first against high-resolution data and then by a joint refinement of both anharmonic and electron density parameters in the subsequent refinement steps (Mallinson et al., 1988).

Standard resolution crystal structures of numerous 4-nitroimidazole derivatives have been investigated in our laboratories, with special attention paid to the weak intermolecular interactions present in these molecular crystals (Kubicki et al., 2001; Kubicki, 2004a,b; Kubicki & Wagner, 2007, 2008; Wagner et al., 2007; Wagner & Kubicki, 2007). Further investigations of the high-resolution diffraction data using the Hansen–Coppens model (Hansen & Coppens, 1978) and quantum theory of atoms in molecules (QTAIM; Bader, 1994) topological analysis were performed for 1-phenyl-4-nitroimidazole (Kubicki et al., 2002), 1-(2′-aminophenyl)-2-methyl-4-nitroimidazole (Paul, Kubicki, Jelsch et al., 2011), 2-methyl-4-nitro-1-phenyl-1H-imidazole-5-carbonitrile (Poulain-Paul et al., 2012; Paul, Kubicki, Kubas et al., 2011) and for the solid solution of 1-(4′-chlorophenyl)-2-methyl-4-nitro-1H-imidazole-5-carbonitrile (97.5%) with 5-bromo-1-(4′-chlorophenyl)-2-methyl-4-nitro-1H-imidazole (2.5%; Poulain et al., 2014).

After high-resolution crystal structure determination and multipolar refinement of 1-(2′-aminophenyl)-2-methyl-4-nitroimidazole, 1, at 100 K (Paul, Kubicki, Jelsch et al., 2011), unexpected high residual-density peaks arranged in a `shashlik-like' pattern appeared at high-order residual maps ( ≥ 0.7 Å⁻¹) in the planes bisecting the amino groups of two symmetry-independent molecules, and a distorted static deformation density was observed for one of the nitro groups involved in the weaker hydrogen bonds. Thus, third-order ANMs were used to model the two fragments of the molecules (a split-atom refinement did not succeed). Such a procedure resulted in virtually featureless residual electron density maps and symmetrical arrangement of the static electron density of the NO₂ fragment.

In the next step powder diffraction experiments at different temperatures (20 ≤ T ≤ 300 K) were performed. The data collected revealed an isomorphic phase transition (see for example Bendeif et al., 2009) as reflected by an abrupt change of the b unit-cell parameter around 65 K. Forbidden reflections in P2₁/c did not appear, which suggests that the space group was conserved.

The aim of this paper is an attempt to relate this anharmonic refinement to the isomorphic phase transition by analysing several additional X-ray single-crystal diffraction experiments performed for 1, including a high-resolution full data collection at 10 K on an Agilent Technologies SuperNova diffractometer, accurate full data collections at 35 and 70 K using the homemade mini-goniometer system implemented on an Orange top-loading cryostat on the CRM² Bruker AXS APEX II diffractometer (Fertey et al., 2007), and temperature-dependent unit-cell parameter determination from powder diffraction patterns collected on a Panalytical X'Pert Pro diffractometer. As careful crystal structure and topological analyses of the electron density have already been performed for the title compound (Paul, Kubicki, Jelsch et al., 2011; Kubicki & Wagner, 2008), they are not repeated in this paper.

2. Materials and methods

2.1. Experimental details of X-ray single-crystal diffraction measurements

A yellowish transparent cube-shaped crystal (0.20 × 0.17 × 0.13 mm) was chosen for data collection at 10 K on an Agilent Technologies SuperNova four-circle diffractometer equipped with a CCD detector. The temperature was controlled with an Oxford Cryosystems cooling device. A total of 2970 frames were collected in 35 runs to obtain the high redundancy data and 32 additional reference frames were measured to verify the stability of the crystal. Diffraction data up to = 1.10 Å⁻¹ were collected using the ω-scan method with a rotation width of = 1°. Different exposure times were chosen depending on the 2θ settings of the detector: 5 s for = 1.25°, and 20 s for = −65.45 and 67.95°, with a 55 mm crystal-to-detector distance. Details of the data collection and crystallographic statistics are collected in Table 1.

Table 1
Experimental details for single-crystal measurements at 10, 35 and 70 K – all refinement parameters are given for the multipole model

Crystal data
Chemical formula	C10H10N4O2
Mr	436.4
Temperature (K)	10	35	70
Wavelength (Å)	0.71073, graphite-monochromated
Crystal system, space group	Monoclinic, P21/c
a, b, c (Å)	11.0104 (3), 10.0398 (2), 18.6040 (4)	10.9784 (14), 10.0056 (13), 18.488 (3)	11.0470 (12), 10.1293 (11), 18.652 (2)
β (°)	97.320 (2)	97.223 (4)	97.223 (3)
V (Å^3)	2039.77 (8)	2014.7 (5)	2070.6 (4)
Z	8
Dx (g cm^−3)	1.42	1.44	1.40
F000	912
Absorption coefficient (mm^−1)	0.104	0.105	0.102
Crystal to detector distance (mm)	55	40	40
Data collection
Absorption correction	Analytical	Multi-scan	Multi-scan
Tmin, Tmax	0.983, 0.989	0.915, 1.105	0.932, 1.028
Crystal size (mm)	0.20 × 0.17 × 0.13	0.12 × 0.14 × 0.15	0.12 × 0.14 × 0.15
range (Å^−1)	0.07–1.10	0.07–0.90	0.07–1.20
Limiting indices	−24 → h → 25, −22 → k → 22, −41 → l → 41	−19 → h → 16, −15 → k → 17, −32 → l → 32	−23 → h → 25, −23 → k → 22, −44 → l → 44
Reflections collected, unique, unique with σ cut-off	305 420, 22 731, 15 217 [I > 2σ(I)]	41 665, 11 032, 9475 [I > 1.25σ(I)]	121 651, 26 563, 17 738 [I > 2σ(I)]
Rint	0.059	0.065	0.087
Data completeness (%)	100	96.7	88.5
No. of parameters	945	945	995†
Refinement
Weighting scheme
Goodness of fit on F^2	0.90	0.92	0.95
Final R(F) indices‡	R1 = 0.032, wR2 = 0.028	R1 = 0.029, wR2 = 0.028	R1 = 0.029, wR2 = 0.028
Δρmax, Δρmin (e Å^−3)	0.32 (6), −0.34 (6)	0.25 (6), −0.30 (6)	0.29 (6), −0.27 (6)

†Different number of refined parameters due to additional ANMs required only at 70 K.
‡.

Another yellowish crystal (0.12 × 0.14 × 0.15 mm) from the same crystallization batch was chosen for the 35 and 70 K measurements on a CRM² Nonius Kappa CCD diffractometer equipped with a homemade universal low-temperature mini-goniometer, helium top-loading Orange cryostat (Fertey et al., 2007). A total of 4074 (35 K) and 8240 (70 K) frames were collected in 8 (35 K) and 25 runs (70 K). Diffraction data up to = 0.90 Å⁻¹ (35 K) and = 1.20 Å⁻¹ (70 K) – the lower resolution for the 35 K measurement resulted from time and liquid helium restrictions – were collected using ω- and φ-scan methods with 0.25° rotation widths, the χ angle being fixed at 43.37° and the crystal-to-detector distance at 40 mm. Two positions (−30 and −90°) were used to collect all the reflections with exposure times of 3 and 60 s for the 35 K data, and 10 s and 60 s for the 70 K data. Details of the data collections and measurement statistics are given in Table 1. Despite some geometrical constraints due to the cryostat orientation, the completeness of the data is very close to 100%, and the internal agreement factors are very good compared with typical charge-density quality X-ray data.

Unit-cell parameter determination, integration of the reflection intensities, data reduction and Lorentz–polarization corrections were performed using CrysAlis PRO (Agilent Technologies, 2013) for the 10 K data, and APEX2 (Bruker, 2012) for the 35 and 70 K data. An analytical numerical absorption correction using a multi-faced crystal model (Clark & Reid, 1995) was applied to the 10 K data, while a multi-scan absorption correction (Blessing, 1995) was applied to the 35 and 70 K data. Data sorting, scaling and merging of reflections were performed with SORTAV (Blessing, 1997, 1989, 1987) for all three datasets.

As shown in Table 1, all the multipolar models (10, 35 and 70 K) converge to very good R factors. This shows the possibility of collecting accurate charge density data using the mini-goniometer and cryostat system (Fertey et al., 2007), i.e. performing very low-temperature high-resolution accurate X-ray data collections with very small helium consumption. One of the problems not yet resolved for the mini-goniometer data is the precision of the cell parameters (Table 1) possibly due to the difficulty in centering the crystal inside the cryostat, and to the anisotropy of the data collection needed to avoid possible collisions; as shown below, this has some consequences on the quality of the bond distances and angles.

2.2. Powder diffraction measurements (PXRD)

All PXRD measurements were performed using a Panalytical X'Pert Pro diffractometer equipped with a Cu tube, a Ge(111) incident-beam monochromator (λ = 1.5406 Å) and an X'Celerator detector. Temperature-controlled diffractograms were collected on cooling with an Oxford Cryosystems cryostat (Phenix) from 300 to 125 K (under vacuum, cooling rate 6 K min⁻¹; 25 K increments; temperature stabilization: 5 min), then from 120 to 15 K (under vacuum, cooling rate 6 K min⁻¹, 5 K increments, temperature stabilization: 5 min). Temperature-controlled diffractograms were collected on heating from 20 to 120 K with the same cryostat and then from 125 to 300 K under the same conditions.

Data collection was carried out in the scattering angle range θ = 5–50° with a 0.0167° step over 4 h. The program GSAS/EXGUI (Toby, 2001; Larson & Von Dreele, 1994) was used for the Le Bail extraction in space group P2₁/c. Owing to the complexity of the structure and since powder X-ray diffraction (PXRD) is less sensitive than single-crystal measurements, single-crystal atomic parameters were used as the structural model. Only the cell dimensions, parameters of the pseudo-Voigt profile shape function and the zero shift were refined.

2.3. Structure determination and refinement

Crystal structures of 1 for the three datasets (10, 35 and 70 K) were solved using SIR92 (Altomare et al., 1993) and first refined with SHELXL (Sheldrick, 2008) applying the independent atom model (IAM), with isotropic and anisotropic treatment of H and non-H atoms, respectively. Geometry constraints (C_Ar—H = 1.083 Å; C_Me—H = 1.059 Å; N—H = 1.009 Å), atomic thermal motion parameters (initial values of U_iso^H = y×U_eq^X; y = 1.2 for Ar and NH₂ groups; y = 1.5 for Me group) were initially imposed on H atoms to preserve the physical meaningfulness of the models. Fig. 1 shows the two symmetry-independent molecules of 1 with labelling scheme (see Paul, Kubicki, Jelsch et al., 2011, for more details).

Figure 1 Anisotropic ellipsoid representation of the two symmetry-independent molecules of 1 with atom-labelling scheme. Ellipsoids are drawn at the 50% probability level, H atoms are depicted as capped sticks (MERCURY; Macrae et al., 2008). The labels of the second molecule are ordered in the same way and marked with an A (e.g. C1A, N1A etc.). The strongest interactions are indicated by turquoise dashed lines.

Subsequently the multipolar refinement strategy previously presented was applied, with restraints on symmetry and chemical equivalency defined as optimal from R_free-factor calculations (see Paul, Kubicki, Jelsch et al., 2011, and references therein). The main points of the refinement strategy were the following: (a) scale factor refined continuously with all parameters; (b) anharmonicity parameters refined against the high-order data ( ≥ 0.7 Å⁻¹; only deemed necessary for the 70 K data); (c) thermal motion and positional parameters for non-H atoms against high-order data alternatively with H-atom coordinates and distances constrained to standard neutron values (Allen & Bruno, 2010); (d) refinement of multipolar parameters followed by valence populations (constraints imposed on chemically equivalent atoms in a similar environment) and then both together; (e) κ parameters for non-H atoms (constraints imposed on chemically equivalent atoms in similar environment); (f) points (d) and (e) performed until convergence is achieved; (g) anharmonicity parameters (only for 70 K data) alternatively with thermal motion and positional parameters for all atoms against all data (H atoms still constrained); (h) valence and multipole populations alternatively with κ for non-H atoms and positional parameters plus thermal motion; (i) anharmonicity parameters (only for 70 K data); constraints on valence and multipole populations together with κ, coefficients changed into restraints at the R_free level; (j) non-H atoms alternatively with valence and multipole populations; (k) κ of H atoms; (l) points (h) and (i) alternatively; (m) for H atoms; (n) point (l) repeated; (n) SHADE estimation of the thermal motion of H atoms (Madsen, 2006; Madsen et al., 2013); (o) valence and multipole populations alternatively with κ H atoms, κ non-H atoms, coordinates and thermal motion; (p) point (j) repeated; (q) point (h) repeated; successive refinement of κ non-H, κ H-atoms, non-H, H atoms; (r) final simultaneous refinement of all parameters.

As mentioned above, only the 70 K data required the third-order anharmonic corrections (Kuhs, 1992; Sørensen et al., 2003) for a correct modelling of three atoms of one NO₂ group (N81, O81 and O82) and two amino N atoms (N6 and N6A) in order to reduce the typical `shashlik-like' pattern usually found at high-order residual density maps. Stronger interactions, in which the second nitro group (N81A, O81A and O82A) is involved, seem to restrict vibrations and therefore an harmonic model was sufficient.

3. Results and discussion

3.1. Powder diffraction data

Along with the temperature decrease from 300 to 100 K, a linear evolution of the unit-cell volume is observed reaching a minimum at ∼ 60–65 K (Fig. 2), followed by a slight volume increase from 50 to 20 K. The b parameter decreases linearly from room temperature (RT) to 60 K with the temperature (T) ( = −3 × 10⁻⁵T + 0.99) and then increases for T < 60 K ( = 2 × 10⁵T + 0.99), in agreement with previous findings (Paul, Kubicki, Jelsch et al., 2011). The c parameter remains almost constant, as already noted by Paul, Kubicki, Jelsch et al. (2011). Contrary to the observation of Bendeif et al. (2009) no hysteresis phenomenon was found or if it exists the temperature difference is smaller than 5 K.

Figure 2 Unit-cell parameter variation with temperature decrease from 300 to 20 K normalized to 300 K.

When increasing T in the range 15–100 K, a splitting of the 100 and 200 reflections appears, which may suggest a second-order phase transition (Fig. 3). The phenomenon is more pronounced at 100 K, while at 300 K the diffraction peaks are practically symmetrical. Such a splitting is not visible on the 020 reflection due to its very small intensity (Fig. S2 ). Two crystal phases seem to coexist along a large temperature range. This can explain the observed disorder at 100 K, which was solved using anharmonic atom treatment.

Figure 3 Splitting of the 100 and 200 diffraction peaks with temperature increase.

3.2. Charge-density distribution modelling

According to our previous findings (Paul, Kubicki, Jelsch et al., 2011) for the 100 K data, the largest residual peaks in the residual density Fourier maps ( ≤ 0.9 Å⁻¹) lie in the planes bisecting the H61—N6—H62 moiety, at a distance of ca 0.5 Å from the N atoms (0.37 e Å⁻³ for N6A, and 0.28 e Å⁻³ for N6 atoms). They disappear at a resolution of ≤ 0.7 Å⁻¹ and therefore cannot be interpreted as missing H atoms, because they only appear when high-order reflections are included, while H atoms scatter at very low . The refined third-order anharmonic parameters are statistically not significant, but reduce substantially the residual peak heights.

The first important result of this report is that the 10 and 35 K data do not need any anharmonic motion modelling (ANM) of both amino and nitro groups, whereas ANM refinement is still necessary at 70 K as peaks and holes in the `shashlik-like' pattern appear close to the N6 atom: +0.42 (6) and −0.32 (6) e Å<sup>−3</sup> [compared with +0.56 (5) and −0.27 (5) e Å<sup>−3</sup> for the 100 K data (Paul, Kubicki, Jelsch et al., 2011)]. The lower resolution of the 35 K (0.9 Å<sup>−1</sup>) dataset compared with the 10 K (1.1 Å<sup>−1</sup>) and 70 K (1.2 Å<sup>−1</sup>) ones does not affect the detectability of the `shashlik-like' pattern, since such a distortion is already observed at 100 K at 0.9 Å⁻¹ cut-off (Paul, Kubicki, Jelsch et al., 2011). Moreover, the cut-off at 35 K was reduced to 1.25 compared with 2.0 for 10 and 70 K in order to improve the data-to-parameter ratio.

Fig. 4 gives residual density maps obtained after harmonic (left panel) and anharmonic (right panel) treatment of the 70 K data. Similar to the 100 K data, residual peaks at 70 K are more pronounced for one of the two amino groups (N6A) and mostly at higher resolution (1.2 Å⁻¹). The residual peaks at 100 K are slightly higher than those observed for the 70 K data. Application of the ANMs of third-order significantly reduced the positive and negative residual electron density peaks and restored the expected valence-density arrangement around O atoms in the NO₂ group.

Figure 4 Residual and static electron density maps at 70 K after multipole refinement in the planes bisecting NH2 and NO2 groups (cutoff 1.2 and 0.9 Å resolution) neglecting (left panel) or including (right panel) ANMs; contours set to 0.05 e Å^−3, blue dashed lines – negative contours, red solid lines – positive contours; 1.2 and 0.9 values indicate the resolution (Å^−1).

Comparison of the third-order ANM parameters for the 100 and 70 K data is given in Table 2 for C_ijk above the 3σ criterion. There is a general trend that the significant parameters at 100 K drop considerably at 70 K (e.g. C₁₁₁ for N6 and N6A atoms). However, surprisingly, some parameters seem to be significant only at 70 K (e.g. C₂₂₂, C₂₂₃ and C₂₃₃ for N6A).

Table 2
Anharmonic nuclear motion parameters greater than 3σ for the 100 K and 70 K data

100 K
C111	N6	−0.001724 (81)†	N6A	0.000657 (47)†	N8	–	O81	0.000787 (60)†	O82	0.000494 (66)
C222	N6	0.000264 (49)	N6A	–	N8	−0.001359 (69)†	O81	0.000246 (63)	O82	0.000379 (95)
C333	N6	–	N6A	–	N8	−0.000232 (10)†	O81	−0.000044 (9)	O82	−0.000034 (8)
C112	N6	0.002705 (157)†	N6A	−0.000538 (93)	N8	−0.000386 (91)	O81	0.000655 (138)	O82	−0.000725 (165)
C122	N6	−0.001220 (128)	N6A	0.000432 (92)	N8	0.000902 (119)	O81	0.000411 (141)	O82	0.000856 (192)
C113	N6	–	N6A	0.000268 (51)	N8	−0.000303 (50)	O81	0.000324 (71)	O82	–
C133	N6	–	N6A	–	N8	0.000295 (34)	O81	–	O82	–
C223	N6	–	N6A	–	N8	−0.002084 (85)†	O81	–	O82	−0.000378 (101)
C233	N6	–	N6A	–	N8	−0.001178 (45)†	O81	–	O82	0.000386 (44)
C123	N6	–	N6A	–	N8	0.000991 (102)	O81	−0.000511 (114)	O82	–
70 K
C111	N6	−0.000475 (56)	N6A	0.000135 (39)	N8	0.000313 (41)	O81	0.000466 (48)	O82	0.000519 (52)†
C222	N6	–	N6A	0.000422 (34)†	N8	–	O81	–	O82	–
C333	N6	–	N6A	−0.000061 (4)†	N8	–	O81	–	O82	–
C112	N6	−0.000874 (81)†	N6A	–	N8	0.000245 (58)	O81	−0.000604 (76)	O82	0.000770 (90)
C122	N6	−0.000247 (64)	N6A	–	N8	0.000321 (51)	O81	0.000308 (70)	O82	0.000713 (87)
C113	N6	–	N6A	–	N8	0.000175 (33)	O81	0.000348 (42)	O82	0.000237 (42)
C133	N6	–	N6A	0.000095 (17)	N8	0.000081 13)	O81	0.000100 (18)	O82	0.000064 (17)
C223	N6	–	N6A	−0.000627 (36)†	N8	0.000113 (23)	O81	0.000210 (33)	O82	–
C233	N6	–	N6A	0.000361 (18)†	N8	–	O81	−0.000084 (16)	O82	−0.000136 (17)
C123	N6	–	N6A	−0.000435 (51)	N8	0.000123 (38)	O81	–	O82	–

†10σ level.

The quality of the four (10, 35, 70 and 100 K) data refinements is comparable, with insignificant differences between the corresponding agreement factors (Table 1): R₁ = 0.029–0.032, wR₂ = 0.025–0.028 and S (goodness-of-fit) = 0.90 (10 K)–1.07 (100 K), and (from +0.25 e Å⁻³ to +0.32 e Å⁻³), (from −0.22 e Å⁻³ to −0.34 e Å⁻³), which in fact depends on the data collection resolution (lowest for 35 K data).

In conclusion, diffraction experiments at 35 and 10 K did not require any special anharmonic treatment, as the harmonic approximation is sufficient for all the atoms concerned (Fig. 5). It is in line with the isomorphic phase transition, which occurs around 60 K. ANH modelling of the 70 and 100 K data enables modelling of the residual density accounting for the disorder which may be due to the co­existence of both LT and HT crystal phases existing in this temperature range.

Figure 5 Residual electron density and static deformation maps after harmonic modelling of 35 and 10 K data drawn in the planes bisecting both amino groups and one nitro group prone to geometrical distortion; contours set at 0.05 e Å^−3, blue solid lines – positive contours, red dashed lines – negative contours, ≤ 0.9 Å^−1.

3.3. Electron density model validation via topological analysis of the covalent bonds

In order to compare and validate the model correctness at different temperatures (10, 35, 70 and 100 K) the covalent bond critical points (CPs) of the aryl ring (that should be unchanged and prove consistency of these four data treatments), together with those of the anharmonic fragments, are collected in Table S1 . In general, the distance between the two involved atoms is ∼ 0.01 Å longer for the 70 K structure, but this lengthening is not significant enough to be reflected in the respective distances to the critical points and, as seen below, is a result of a less accurate estimation of the cell parameters derived from the mini-goniometer data. For the C—C bonds of the aryl ring the total electron density value differences for a given bond are ≤ 0.1 e Å⁻³, about 2σ, while the Laplacian values are systematically higher for the 70–100 K data, but within the usually accepted estimated error (up to 4.0 e Å⁻⁵).

For bonds involving the anharmonic atoms the total density at CP is on average larger for the datasets, which were corrected for anharmonic treatment (maximal change 0.2 e Å⁻³ for the N8—O81 bond), as well as the Laplacian values ≃ 4–6 e Å⁻⁵) for all the 70–100 K bonds, except N8—O81.

Contrary to Zhurov et al. (2011) the Laplacian maps (Fig. 6) of the nitro group calculated within the harmonic approximation (not shown here) are indistinguishable from those correctly modelled, which suggests a lower anharmonicity/disorder in 1.

Figure 6 Laplacian of the total electron density maps at 100, 70, 35 and 10 K for the two NO2 groups; anharmonic treatment indicated by ANMs marked; logarithmic contours; blue dashed lines – positive contours, red solid lines − negative contours.

For the three critical points characterizing the strongest intermolecular interactions where the NO₂ groups are involved, the topological data at different temperatures are collected in Table 3. All electron density values decrease when the temperature increases, while the Laplacian values fluctuate rather than show a visible trend. Nevertheless, all these changes are insignificant at the 3σ level, as expected on the basis of constant intermolecular distances [for example, the O81A⋯H62A distance equals 2.028 (10) Å].

Table 3
Summary of the three strongest nitro group interactions at different temperatures

Cp	T(K)	Involved atoms	D12 (Å)	D1cp (Å)	D2cp (Å)	ρtot (e Å^−3)	^2ρ (e Å^−5)	λ1 (e Å^−5)	λ2 (e Å^−5)	λ3 (e Å^−5)	ε	G(rCP) (kJ mol^−1 a.u.^−3)	V(rCP) (kJ mol^−1 a.u.^−3)	H(rCP) (kJ mol^−1 a.u.^−3)
Cp1	10	O81A—H62A	2.0316	1.281	0.751	0.109	2.14	−0.45	−0.45	3.05	0.00	46.7	−35	11.7
	35		2.0163	1.291	0.726	0.087	2.45	−0.36	−0.36	3.17	0.01	49.8	−32.9	16.9
	70		2.0393	1.302	0.737	0.086	2.34	−0.37	−0.37	3.08	0.01	47.8	−31.8	16.0
	100		2.0261	1.314	0.715	0.060	2.47	−0.25	−0.24	2.96	0.04	47.8	−28.1	19.7
Cp2	10	O82—H62	2.2634	1.408	0.886	0.060	1.21	−0.24	−0.22	1.66	0.09	24.8	−16.8	8.0
	35		2.2496	1.406	0.897	0.055	1.28	−0.25	−0.20	1.73	0.18	25.7	−16.6	9.1
	70		2.2930	1.418	0.912	0.053	1.14	−0.22	−0.20	1.56	0.08	23.1	−15	8.1
	100		2.3014	1.436	0.924	0.046	1.07	−0.21	−0.17	1.44	0.18	21.2	−13.4	7.8
Cp3	10	O81—H4A	2.3450	1.363	1.002	0.076	1.13	−0.26	−0.25	1.64	0.04	24.8	−18.8	6.0
	35		2.3489	1.375	1.005	0.069	1.09	−0.25	−0.24	1.58	0.03	23.5	−17.2	6.3
	70		2.3812	1.395	1.010	0.065	1.07	−0.25	−0.24	1.55	0.03	22.6	−16.2	6.4
	100		2.3671	1.396	1.001	0.058	1.05	−0.25	−0.21	1.50	0.15	21.7	−15.0	6.7

In a recent review, Kamiński et al. (2014) investigated structural parameters and charge-density properties in a series of 100 K high-resolution datasets of α-oxalic acid dehydrate, which reveals that electron density and Laplacian values at corresponding CPs for this unique crystal structure vary over a small range, even at the same temperature. The standard deviations for the total electron density and Laplacian for covalent bonds and intermolecular bonds vary between 0.03–0.06 e Å⁻³, 1–7 e Å⁻⁵ and 0.001–0.03 e Å⁻³, 1–6 e Å⁻⁵, respectively, which confirms our above conclusion that changes in 1 are statistically insignificant.

3.4. Accuracy of the bond lengths obtained from the mini-goniometer data

As already shown recently (Jarzembska et al., 2013), it is difficult to obtain an accurate orientation matrix with the mini-goniometer setup, leading to slightly different cell parameters compared with those obtained from powder diffraction data, which consequently affects the precision of the bond distances. Recalculation of the aryl ring C—C bond lengths for the 35–100 K data, using the unit-cell parameters obtained from the powder diffraction experiment (second row of Table 4), brings a much better agreement (Table S1 versus Table 5). The maximal difference in the d₁₂ value between 35 and 100 K is 0.008 Å and a clear trend is found: d₁₂ (35 K) > d₁₂ (70 K) > d₁₂ (100 K). This behaviour has been known for a few decades (see for example Busing & Levy, 1964; Scheringer, 1980; Destro & Merati, 1995), and results from the higher degree of precision in determining molecular geometry at lower temperatures.

Table 4
Unit-cell parameters of 1 at different temperatures

		10 K	35 K	70 K	100 K
Single-crystal measurement	a (Å)	11.0104 (3)	10.9784 (14)	11.0470 (12)	11.030 (2)
	b (Å)	10.0398 (2)	10.0056 (13)	10.1293 (11)	10.092 (2)
	c (Å)	18.6040 (4)	18.488 (3)	18.652 (2)	18.637 (3)
	β (°)	97.320 (2)	97.223 (4)	97.223 (3)	97.24 (2)
Powder diffraction	a (Å)	–	11.0595	11.0491	11.0532
	b (Å)		10.1355	10.1156	10.1303
	c (Å)		18.6883	18.6742	18.6769
	β (°)		97.191	97.223	97.175

Table 5
Comparison of the C—C bond distances of the aryl ring for 35, 70 and 100 K data, using the cell parameters transferred from the powder experiment

T (K)	Atom 1	Atom 2	D12 (Å)	T (K)	Atom 1	Atom 2	D12 (Å)
35	C1	C2	1.405	35	C1A	C2A	1.401
70			1.400	70			1.398
100			1.398	100			1.396
35	C1	C6	1.413	35	C1A	C6A	1.412
70			1.410	70			1.409
100			1.409	100			1.407
35	C2	C3	1.401	35	C2A	C3A	1.396
70			1.396	70			1.393
100			1.395	100			1.392
35	C3	C4	1.404	35	C3A	C4A	1.406
70			1.401	70			1.403
100			1.400	100			1.401
35	C4	C5	1.400	35	C4A	C5A	1.396
70			1.394	70			1.392
100			1.392	100			1.390
35	C5	C6	1.418	35	C5A	C6A	1.415
70			1.417	70			1.414
100			1.415	100			1.412

4. Conclusions

The aim of this study was to show the link between anharmonicity and isomorphic phase transition of a molecular crystal. We have shown that ANM corrections improve the charge-density model above the phase transition temperature, whereas a simple harmonic model is sufficient below the transition temperature. Softening of the anharmonicity is therefore connected with the transition mechanism. As shown from powder diffraction data the nature of the phase transition seems to be second order with a coexistence of both phases over a large temperature range (40–50 K). As the atomic structures of both phases are extremely similar, a split-atom model cannot take into account the disorder observed on the residual maps which was accounted for using a third-order anharmonic treatment. Such an interpretation however needs more experiments on other molecular crystals to be considered as a general rule.

Supporting information

Computing details

For all compounds, program(s) used to refine structure: MoPro (J. Appl. Cryst. 2005, 38, 38-54).

Figures

(I_10K)

Crystal data

C10H10N4O2	V = 2039.77 (8) Å^3
Mr = 218.22	Z = 8
Monoclinic, P21/c	F(000) = 912
Hall symbol: -P 2ybc	Dx = 1.422 Mg m^−3
a = 11.0104 (3) Å	Mo Kα radiation, λ = 0.71073 Å
b = 10.0398 (2) Å	T = 10 K
c = 18.6040 (4) Å	Cube, yellowish
β = 97.320 (2)°	0.20 × 0.17 × 0.13 mm

Data collection

Radiation source: fine-focus sealed tube	h = −24→24
15217 independent reflections	k = 0→22
15187 reflections with > 2.0σ(I)	l = 0→40
θmax = 51.4°, θmin = 2.9°

Refinement

Refinement on F	6868 restraints
Least-squares matrix: full	Primary atom site location: structure-invariant direct methods
R[F^2 > 2σ(F^2)] = 0.032	Secondary atom site location: difference Fourier map
wR(F^2) = 0.028	Hydrogen site location: inferred from neighbouring sites
S = 0.90	H-atom parameters constrained
15217 reflections	Weighting scheme based on measured s.u.'s
873 parameters	(Δ/σ)max = 0.002

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Ų)

	x	y	z	Uiso*/Ueq
C1	0.79723 (3)	−0.02243 (3)	0.44894 (2)	0.00767 (2)
C1A	0.33134 (3)	0.44377 (3)	0.34826 (2)	0.00733 (2)
C2	0.84947 (3)	−0.14445 (3)	0.43439 (2)	0.00961 (2)
C2A	0.26043 (3)	0.52960 (3)	0.38456 (2)	0.00874 (2)
C3	0.89396 (3)	−0.22939 (4)	0.49066 (2)	0.01036 (2)
C3A	0.13512 (3)	0.53890 (3)	0.36330 (2)	0.00945 (2)
C4	0.88435 (3)	−0.19040 (3)	0.56181 (2)	0.00947 (2)
C4A	0.08228 (3)	0.45942 (3)	0.30602 (2)	0.00911 (2)
C5	0.83387 (3)	−0.06829 (3)	0.57666 (2)	0.00920 (2)
C5A	0.15261 (3)	0.37180 (3)	0.27105 (2)	0.00853 (2)
C6	0.78921 (3)	0.01964 (3)	0.52033 (2)	0.00787 (2)
C6A	0.28021 (3)	0.36271 (3)	0.29072 (2)	0.00753 (2)
C7	0.62566 (3)	0.07072 (3)	0.36198 (2)	0.00759 (2)
C7A	0.51017 (3)	0.36493 (3)	0.43368 (2)	0.00760 (2)
C8	0.72558 (3)	0.18716 (3)	0.29456 (2)	0.00761 (2)
C8A	0.65700 (3)	0.45127 (3)	0.38611 (2)	0.00751 (2)
C9	0.81303 (3)	0.13474 (3)	0.34583 (2)	0.00806 (2)
C9A	0.55351 (3)	0.48999 (3)	0.34175 (2)	0.00802 (2)
C71	0.52841 (3)	−0.00240 (4)	0.39341 (2)	0.01077 (2)
C71A	0.43591 (3)	0.29458 (3)	0.48297 (2)	0.01041 (2)
N1	0.74785 (3)	0.06023 (3)	0.38919 (1)	0.00723 (1)
N1A	0.45975 (3)	0.43357 (3)	0.37306 (1)	0.00715 (1)
N2	0.60968 (3)	0.14837 (3)	0.30438 (2)	0.00772 (2)
N2A	0.63079 (3)	0.37393 (3)	0.44249 (2)	0.00784 (2)
N6	0.73425 (4)	0.13759 (4)	0.53500 (2)	0.01082 (2)
N6A	0.35118 (3)	0.28106 (4)	0.25358 (2)	0.01072 (2)
N8	0.74791 (3)	0.26965 (3)	0.23532 (2)	0.00817 (2)
N81	0.78075 (3)	0.48624 (3)	0.37910 (2)	0.00788 (2)
O82	0.85480 (4)	0.30101 (4)	0.23041 (2)	0.01147 (2)
O81A	0.86300 (4)	0.43939 (4)	0.42215 (2)	0.01120 (2)
O81	0.65991 (5)	0.30427 (4)	0.19180 (2)	0.01210 (2)
O82A	0.79807 (4)	0.56324 (4)	0.32922 (2)	0.01114 (2)
H5A	0.10858	0.30754	0.22877	0.02443
H4A	−0.01551	0.46346	0.28922	0.02470
H62	0.72698	0.21193	0.49820	0.02143
H9	0.91189	0.14282	0.35477	0.02289
H2A	0.30513	0.58636	0.42991	0.02300
H61A	0.30832	0.20552	0.22492	0.02241
H2	0.85243	−0.16976	0.37806	0.02311
H9A	0.53662	0.54998	0.29312	0.02290
H5	0.82686	−0.03840	0.63191	0.02508
H3A	0.08013	0.60590	0.39140	0.02396
H3	0.93376	−0.32473	0.47966	0.02419
H4	0.91559	−0.25709	0.60608	0.02543
H61	0.74204	0.16542	0.58750	0.02265
H73	0.53329	−0.10481	0.38043	0.02963
H72	0.53620	0.01031	0.45032	0.02929
H62A	0.43719	0.25799	0.27547	0.02142
H71	0.44155	0.03412	0.37099	0.02926
H72A	0.37335	0.22722	0.45437	0.02929
H71A	0.49701	0.24243	0.52167	0.02946
H73A	0.38318	0.36402	0.50863	0.02956

Atomic displacement parameters (Ų)

	U^11	U^22	U^33	U^12	U^13	U^23
C1	0.0088 (1)	0.0078 (1)	0.00634 (9)	0.00107 (8)	0.00075 (8)	0.00055 (8)
C1A	0.0066 (1)	0.0078 (1)	0.00749 (9)	0.00020 (8)	0.00057 (7)	−0.00084 (8)
C2	0.0121 (1)	0.0090 (1)	0.00779 (10)	0.00256 (9)	0.00141 (8)	−0.000043 (8)
C2A	0.0080 (1)	0.0092 (1)	0.00893 (10)	0.00076 (8)	0.00071 (8)	−0.00186 (8)
C3	0.0127 (1)	0.0084 (1)	0.0098 (1)	0.00262 (10)	0.00097 (9)	0.00081 (8)
C3A	0.0076 (1)	0.0104 (1)	0.01038 (10)	0.00132 (9)	0.00149 (9)	−0.00179 (9)
C4	0.0107 (1)	0.0087 (1)	0.00867 (10)	0.00108 (9)	0.00009 (8)	0.00173 (9)
C4A	0.0066 (1)	0.0109 (1)	0.00978 (10)	0.00056 (8)	0.00091 (8)	−0.00052 (9)
C5	0.0113 (1)	0.0093 (1)	0.00687 (10)	0.00126 (9)	0.00038 (8)	0.00096 (8)
C5A	0.0067 (1)	0.0103 (1)	0.00844 (9)	0.00009 (9)	0.00036 (8)	−0.00111 (8)
C6	0.0093 (1)	0.0078 (1)	0.00642 (9)	0.00102 (8)	0.00078 (8)	0.00034 (7)
C6A	0.0068 (1)	0.0082 (1)	0.00754 (9)	0.00033 (8)	0.00083 (8)	−0.00106 (8)
C7	0.0074 (1)	0.0086 (1)	0.00685 (9)	−0.00037 (8)	0.00102 (8)	0.00107 (8)
C7A	0.0072 (1)	0.0080 (1)	0.00761 (9)	−0.00040 (8)	0.00084 (8)	0.00118 (8)
C8	0.0075 (1)	0.0085 (1)	0.00679 (9)	−0.00012 (8)	0.00108 (8)	0.00140 (8)
C8A	0.0064 (1)	0.0084 (1)	0.00761 (9)	−0.00027 (8)	0.00055 (8)	0.00084 (8)
C9	0.0069 (1)	0.0095 (1)	0.00770 (9)	−0.00032 (9)	0.00063 (8)	0.00113 (8)
C9A	0.0072 (1)	0.0091 (1)	0.00768 (9)	−0.000052 (8)	0.00074 (8)	0.00159 (8)
C71	0.0092 (1)	0.0130 (1)	0.0103 (1)	−0.00183 (10)	0.00209 (9)	0.00191 (9)
C71A	0.0101 (1)	0.0109 (1)	0.0105 (1)	−0.00094 (9)	0.00225 (9)	0.00252 (9)
N1	0.00702 (10)	0.00820 (10)	0.00639 (8)	0.00025 (7)	0.00051 (7)	0.00129 (7)
N1A	0.00595 (10)	0.00814 (10)	0.00718 (8)	−0.00014 (7)	0.00019 (7)	0.00087 (7)
N2	0.0075 (1)	0.0087 (1)	0.00693 (9)	0.00036 (8)	0.00051 (8)	0.00116 (8)
N2A	0.0070 (1)	0.0083 (1)	0.00806 (9)	−0.000028 (8)	0.00035 (8)	0.00099 (8)
N6	0.0155 (1)	0.0090 (1)	0.00801 (10)	0.00347 (10)	0.00177 (8)	−0.00032 (8)
N6A	0.0085 (1)	0.0119 (1)	0.0116 (1)	0.00127 (9)	0.00095 (9)	−0.00438 (9)
N8	0.0091 (1)	0.0083 (1)	0.00719 (9)	−0.00015 (8)	0.00135 (8)	0.00120 (8)
N81	0.0066 (1)	0.0083 (1)	0.00877 (9)	0.000042 (8)	0.00090 (8)	0.00052 (8)
O82	0.0105 (1)	0.0128 (1)	0.0114 (1)	−0.0030 (1)	0.0025 (1)	0.0018 (1)
O81A	0.0073 (1)	0.0136 (1)	0.0122 (1)	0.0003 (1)	−0.00076 (10)	0.0029 (1)
O81	0.0114 (2)	0.0147 (1)	0.0100 (1)	0.0017 (1)	0.0008 (1)	0.0048 (1)
O82A	0.0087 (1)	0.0124 (1)	0.0127 (1)	0.00032 (10)	0.00267 (10)	0.0043 (1)
H5A	0.0207	0.0264	0.0247	−0.0013	−0.0026	−0.0106
H4A	0.0127	0.0303	0.0299	0.0017	−0.0021	−0.0065
H62	0.0291	0.0179	0.0172	0.0016	0.0022	0.0050
H9	0.0126	0.0299	0.0259	−0.0008	0.0011	0.0047
H2A	0.0207	0.0264	0.0206	−0.0006	−0.0023	−0.0085
H61A	0.0209	0.0201	0.0250	−0.0017	−0.0021	−0.0062
H2	0.0307	0.0247	0.0139	0.0042	0.0030	−0.0028
H9A	0.0221	0.0269	0.0191	0.0006	0.0006	0.0104
H5	0.0364	0.0257	0.0133	0.0069	0.0039	−0.0011
H3A	0.0193	0.0266	0.0262	0.0051	0.0037	−0.0085
H3	0.0317	0.0172	0.0234	0.0083	0.0027	−0.0018
H4	0.0361	0.0218	0.0177	0.0081	0.0006	0.0058
H61	0.0317	0.0230	0.0131	0.0025	0.0021	−0.0016
H73	0.0342	0.0155	0.0415	−0.0010	0.0137	−0.0038
H72	0.0340	0.0390	0.0152	−0.0091	0.0047	−0.0023
H62A	0.0147	0.0239	0.0244	0.0027	−0.0025	−0.0007
H71	0.0166	0.0345	0.0358	0.0036	0.0000	0.0114
H72A	0.0311	0.0325	0.0241	−0.0142	0.0026	−0.0052
H71A	0.0237	0.0371	0.0267	0.0057	0.0000	0.0144
H73A	0.0345	0.0236	0.0341	0.0067	0.0177	−0.0018

Geometric parameters (Å, º)

C1—N1	1.4373 (4)	C7A—N1A	1.3767 (4)
C1—C6	1.4071 (4)	C7A—N2A	1.3203 (5)
C1—C2	1.3944 (4)	C7A—C71A	1.4832 (5)
C1A—N1A	1.4339 (4)	C8—N8	1.4248 (4)
C1A—C6A	1.4042 (4)	C8—N2	1.3686 (5)
C1A—C2A	1.3938 (4)	C8—C9	1.3711 (4)
C2—C3	1.3902 (4)	C8A—N81	1.4290 (5)
C2—H2	1.083	C8A—N2A	1.3652 (5)
C2A—C3A	1.3892 (5)	C8A—C9A	1.3751 (4)
C2A—H2A	1.083	C9—N1	1.3685 (4)
C3—C4	1.3971 (5)	C9—H9	1.083
C3—H3	1.083	C9A—N1A	1.3708 (5)
C3A—C4A	1.3975 (4)	C9A—H9A	1.083
C3A—H3A	1.083	C71—H72	1.059
C4—C5	1.3883 (5)	C71—H71	1.059
C4—H4	1.083	C71—H73	1.059
C4A—C5A	1.3875 (5)	C71A—H73A	1.059
C4A—H4A	1.083	C71A—H71A	1.059
C5—C6	1.4100 (4)	C71A—H72A	1.059
C5—H5	1.083	N6—H61	1.009
C5A—C6A	1.4090 (4)	N6—H62	1.009
C5A—H5A	1.083	N6A—H62A	1.009
C6—N6	1.3730 (5)	N6A—H61A	1.009
C6A—N6A	1.3774 (5)	N8—O81	1.2309 (5)
C7—N1	1.3797 (4)	N8—O82	1.2329 (5)
C7—N2	1.3187 (4)	N81—O81A	1.2239 (5)
C7—C71	1.4788 (5)	N81—O82A	1.2411 (5)
C1—N1—C7	125.65 (4)	C6A—C5A—H5A	119.3
C1—N1—C9	126.61 (4)	C7—N1—C9	107.59 (3)
C1—C6—N6	121.92 (3)	C7—N2—C8	104.27 (3)
C1—C6—C5	117.11 (3)	C7—C71—H72	111.4
C1—C2—C3	120.49 (4)	C7—C71—H71	109.6
C1—C2—H2	117.3	C7—C71—H73	109.4
C1A—N1A—C7A	125.27 (3)	C7A—N1A—C9A	107.94 (3)
C1A—N1A—C9A	126.78 (3)	C7A—N2A—C8A	104.55 (3)
C1A—C6A—N6A	121.96 (4)	C7A—C71A—H73A	110.0
C1A—C6A—C5A	116.75 (4)	C7A—C71A—H71A	107.6
C1A—C2A—C3A	120.06 (4)	C7A—C71A—H72A	111.6
C1A—C2A—H2A	118.4	C8—N8—O81	118.30 (4)
C2—C1—N1	118.81 (3)	C8—N8—O82	117.79 (3)
C2—C1—C6	121.59 (3)	C8—C9—N1	104.20 (3)
C2—C3—C4	118.66 (3)	C8—C9—H9	132.9
C2—C3—H3	120.8	C8A—N81—O81A	118.72 (4)
C2A—C1A—N1A	118.58 (3)	C8A—N81—O82A	117.41 (4)
C2A—C1A—C6A	122.20 (4)	C8A—C9A—N1A	103.85 (3)
C2A—C3A—C4A	118.73 (4)	C8A—C9A—H9A	134.4
C2A—C3A—H3A	120.0	C9—C8—N8	125.89 (4)
C3—C2—H2	122.2	C9—C8—N2	112.46 (4)
C3—C4—C5	121.10 (3)	C9A—C8A—N81	127.06 (3)
C3—C4—H4	119.5	C9A—C8A—N2A	112.45 (3)
C3A—C2A—H2A	121.5	C71—C7—N1	122.57 (3)
C3A—C4A—C5A	121.10 (4)	C71—C7—N2	125.90 (4)
C3A—C4A—H4A	120.0	C71A—C7A—N1A	123.25 (3)
C4—C5—C6	121.03 (3)	C71A—C7A—N2A	125.51 (3)
C4—C5—H5	120.8	N1—C7—N2	111.48 (3)
C4—C3—H3	120.5	N1—C9—H9	122.9
C4A—C5A—C6A	121.13 (3)	N1A—C7A—N2A	111.21 (3)
C4A—C5A—H5A	119.6	N1A—C9A—H9A	121.8
C4A—C3A—H3A	121.2	N2—C8—N8	121.63 (3)
C5—C6—N6	120.87 (3)	N2A—C8A—N81	120.48 (3)
C5—C4—H4	119.4	O82—N8—O81	123.91 (5)
C5A—C6A—N6A	121.26 (3)	O81A—N81—O82A	123.87 (5)
C5A—C4A—H4A	118.8	H62—N6—H61	116.2
C6—N6—H61	116.5	H61A—N6A—H62A	113.1
C6—N6—H62	120.1	H73—C71—H72	110.2
C6—C1—N1	119.58 (3)	H73—C71—H71	108.4
C6—C5—H5	118.1	H72—C71—H71	107.8
C6A—N6A—H62A	119.8	H72A—C71A—H73A	106.7
C6A—N6A—H61A	117.1	H72A—C71A—H71A	110.0
C6A—C1A—N1A	119.15 (3)	H71A—C71A—H73A	110.9
C1—N1—C7—N2	−176.25 (3)	C6A—C1A—C2A—H2A	177.5
C1—N1—C7—C71	1.35 (3)	C6A—C5A—C4A—H4A	179.9
C1—N1—C9—C8	175.96 (3)	C7—N1—C9—C8	0.31 (3)
C1—N1—C9—H9	−3.6	C7—N1—C9—H9	−179.2
C1—C6—N6—H61	−172.5	C7—N2—C8—N8	177.85 (3)
C1—C6—N6—H62	−23.2	C7—N2—C8—C9	−0.33 (3)
C1—C6—C5—C4	0.52 (3)	C7A—N1A—C9A—C8A	0.05 (3)
C1—C6—C5—H5	−178.8	C7A—N1A—C9A—H9A	−179.6
C1—C2—C3—C4	0.49 (3)	C7A—N2A—C8A—N81	178.09 (3)
C1—C2—C3—H3	179.4	C7A—N2A—C8A—C9A	−0.42 (3)
C1A—N1A—C7A—N2A	−179.93 (3)	C8—N2—C7—N1	0.53 (3)
C1A—N1A—C7A—C71A	−1.76 (3)	C8—N2—C7—C71	−176.97 (3)
C1A—N1A—C9A—C8A	179.65 (3)	C8A—N2A—C7A—N1A	0.44 (3)
C1A—N1A—C9A—H9A	0	C8A—N2A—C7A—C71A	−177.68 (3)
C1A—C6A—N6A—H62A	17.4	C9—N1—C7—N2	−0.55 (3)
C1A—C6A—N6A—H61A	160.6	C9—N1—C7—C71	177.05 (3)
C1A—C6A—C5A—C4A	1.58 (3)	C9—C8—N8—O81	176.80 (4)
C1A—C6A—C5A—H5A	−177.0	C9—C8—N8—O82	−2.51 (3)
C1A—C2A—C3A—C4A	0.99 (3)	C9A—N1A—C7A—N2A	−0.32 (3)
C1A—C2A—C3A—H3A	−179.8	C9A—N1A—C7A—C71A	177.85 (3)
C2—C1—N1—C7	99.87 (3)	C9A—C8A—N81—O81A	−177.62 (4)
C2—C1—N1—C9	−75.02 (3)	C9A—C8A—N81—O82A	2.49 (4)
C2—C1—C6—N6	−177.79 (3)	N1—C7—C71—H72	49.9
C2—C1—C6—C5	−1.37 (3)	N1—C7—C71—H71	169.2
C2—C3—C4—C5	−1.33 (3)	N1—C7—C71—H73	−72.1
C2—C3—C4—H4	177.8	N1—C1—C6—N6	0.62 (3)
C2A—C1A—N1A—C7A	76.17 (2)	N1—C1—C2—H2	1.7
C2A—C1A—N1A—C9A	−103.37 (3)	N1—C9—C8—N8	−178.08 (3)
C2A—C1A—C6A—N6A	177.98 (3)	N1—C9—C8—N2	0.00 (3)
C2A—C1A—C6A—C5A	−0.08 (3)	N1A—C7A—C71A—H73A	−64.8
C2A—C3A—C4A—C5A	0.50 (3)	N1A—C7A—C71A—H71A	174.3
C2A—C3A—C4A—H4A	178.7	N1A—C7A—C71A—H72A	53.5
C3—C2—C1—N1	−177.53 (3)	N1A—C1A—C6A—N6A	−5.15 (3)
C3—C2—C1—C6	0.88 (3)	N1A—C1A—C2A—H2A	0.6
C3—C4—C5—C6	0.82 (3)	N1A—C9A—C8A—N81	−178.17 (3)
C3—C4—C5—H5	−179.8	N1A—C9A—C8A—N2A	0.23 (3)
C3A—C2A—C1A—N1A	−178.09 (3)	N2—C7—C71—H72	−132.8
C3A—C2A—C1A—C6A	−1.21 (3)	N2—C7—C71—H71	−13.6
C3A—C4A—C5A—C6A	−1.83 (3)	N2—C7—C71—H73	105.1
C3A—C4A—C5A—H5A	176.7	N2—C8—N8—O81	−1.12 (3)
C4—C5—C6—N6	176.98 (3)	N2—C8—N8—O82	179.57 (4)
C4—C3—C2—H2	−178.7	N2—C8—C9—H9	179.5
C4A—C5A—C6A—N6A	−176.49 (3)	N2A—C7A—C71A—H73A	113.1
C4A—C3A—C2A—H2A	−177.7	N2A—C7A—C71A—H71A	−7.8
C5—C6—N6—H61	11.2	N2A—C7A—C71A—H72A	−128.6
C5—C6—N6—H62	160.5	N2A—C8A—N81—O81A	4.10 (4)
C5—C6—C1—N1	177.04 (2)	N2A—C8A—N81—O82A	−175.79 (4)
C5—C4—C3—H3	179.8	N2A—C8A—C9A—H9A	179.8
C5A—C6A—N6A—H62A	−164.7	N6—C6—C5—H5	−2.4
C5A—C6A—N6A—H61A	−21.4	N6A—C6A—C5A—H5A	5.0
C5A—C6A—C1A—N1A	176.79 (2)	N8—C8—C9—H9	1.4
C5A—C4A—C3A—H3A	−178.7	N81—C8A—C9A—H9A	1.4
C6—C1—N1—C7	−78.58 (2)	H5A—C5A—C4A—H4A	−1.6
C6—C1—N1—C9	106.53 (3)	H4A—C4A—C3A—H3A	−0.5
C6—C1—C2—H2	−179.9	H2A—C2A—C3A—H3A	1.6
C6—C5—C4—H4	−178.3	H2—C2—C3—H3	0.2
C6A—C1A—N1A—C7A	−100.81 (3)	H5—C5—C4—H4	1.1
C6A—C1A—N1A—C9A	79.65 (3)	H3—C3—C4—H4	−1.1

Hydrogen-bond geometry (Å, º)

D—H···A	D—H	H···A	D···A	D—H···A
C4A—H4A···O82^i	1.08	2.35	3.1438 (5)	129
C4A—H4A···O82A^i	1.08	2.48	3.3777 (5)	139
C3—H3···O81A^ii	1.08	2.67	3.5620 (5)	139
N6—H62···N1	1.01	2.57	2.8438 (4)	95
N6—H62···N2A	1.01	2.14	3.0643 (5)	152
N6A—H62A···N1A	1.01	2.52	2.8350 (4)	98
N6A—H62A···N2	1.01	2.20	3.1754 (5)	162
N6—H61···O81	1.01	2.26	3.1826 (5)	151
N6A—H61A···O82A^iii	1.01	2.03	3.0349 (5)	173
C71—H73···O81^iii	1.06	2.54	3.1213 (5)	114
C9A—H9A···N2^iv	1.08	2.47	3.4500 (4)	150
C2A—H2A···N2A	1.08	2.42	3.4268 (4)	154
C9—H9···C4	1.08	2.60	3.5927 (5)	151

Symmetry codes: (i) x−1, y, z; (ii) x, y−1, z; (iii) −x+1, y−1/2, −z+1/2; (iv) −x+1, y+1/2, −z+1/2.

(I_35K)

Crystal data

C10H10N4O2	V = 2014.7 (3) Å^3
Mr = 218.22	Z = 8
Monoclinic, P21/c	F(000) = 912
Hall symbol: -P 2ybc	Dx = 1.439 Mg m^−3
a = 10.978 (1) Å	Mo Kα radiation, λ = 0.71073 Å
b = 10.006 (1) Å	T = 35 K
c = 18.488 (2) Å	× × mm
β = 97.223 (4)°

Data collection

Radiation source: fine-focus sealed tube	h = −19→18
11032 independent reflections	k = 0→17
9475 reflections with > 1.250σ(I)	l = 0→32
θmax = 38.6°, θmin = 4.2°

Refinement

Refinement on F	536 restraints
Least-squares matrix: full	Primary atom site location: structure-invariant direct methods
R[F^2 > 2σ(F^2)] = 0.026	Secondary atom site location: difference Fourier map
wR(F^2) = 0.028	Hydrogen site location: inferred from neighbouring sites
S = 0.92	H-atom parameters constrained
9475 reflections	Weighting scheme based on measured s.u.'s
873 parameters	(Δ/σ)max = 0.001

Special details

Refinement. Refinement of F¹ against reflections. The threshold expression of F² > σ(F²) is used for calculating R-factors(gt) and is not relevant to the choice of reflections for refinement. R-factors based on F² are statistically about twice as large as those based on F, and R-factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Ų)

	x	y	z	Uiso*/Ueq
C1	0.20262 (4)	0.52218 (5)	0.05110 (3)	0.00698 (2)
C1A	0.66891 (4)	0.05650 (5)	0.15177 (2)	0.00668 (2)
C2	0.15057 (4)	0.64411 (5)	0.06574 (3)	0.00952 (3)
C2A	0.73981 (4)	−0.02922 (5)	0.11548 (3)	0.00841 (3)
C3	0.10575 (4)	0.72907 (5)	0.00950 (3)	0.01037 (3)
C3A	0.86506 (4)	−0.03845 (5)	0.13679 (3)	0.00927 (3)
C4	0.11541 (4)	0.69026 (5)	−0.06167 (3)	0.00922 (3)
C4A	0.91802 (4)	0.04091 (5)	0.19403 (2)	0.00859 (3)
C5	0.16578 (4)	0.56810 (5)	−0.07652 (3)	0.00897 (3)
C5A	0.84757 (4)	0.12849 (5)	0.22893 (3)	0.00805 (3)
C6	0.21051 (4)	0.48033 (5)	−0.02026 (2)	0.00737 (3)
C7A	0.48999 (4)	0.13516 (5)	0.06630 (2)	0.00702 (3)
C7	0.37424 (4)	0.42902 (5)	0.13804 (3)	0.00701 (2)
C8A	0.34330 (4)	0.04882 (5)	0.11379 (3)	0.00691 (2)
C8	0.27478 (4)	0.31282 (5)	0.20556 (2)	0.00690 (2)
C9A	0.44677 (4)	0.01025 (5)	0.15821 (3)	0.00727 (2)
C9	0.18710 (4)	0.36536 (5)	0.15433 (3)	0.00749 (2)
C6A	0.72006 (4)	0.13754 (5)	0.20921 (2)	0.00697 (2)
C71A	0.56423 (4)	0.20536 (5)	0.01696 (3)	0.01024 (3)
C71	0.47160 (4)	0.50223 (5)	0.10646 (3)	0.01049 (3)
N1A	0.54038 (4)	0.06660 (4)	0.12692 (2)	0.00652 (2)
N1	0.25220 (4)	0.43966 (4)	0.11085 (2)	0.00643 (2)
N2A	0.36952 (5)	0.12608 (5)	0.05746 (3)	0.00715 (3)
N2	0.39056 (4)	0.35162 (5)	0.19561 (3)	0.00704 (3)
N6A	0.64909 (4)	0.21926 (6)	0.24638 (3)	0.01056 (3)
N6	0.26552 (5)	0.36236 (6)	−0.03491 (2)	0.01059 (3)
N8A	0.21960 (4)	0.01390 (4)	0.12086 (2)	0.00750 (2)
N8	0.25262 (4)	0.23059 (5)	0.26480 (3)	0.00809 (3)
O82A	0.13729 (5)	0.06066 (6)	0.07767 (3)	0.01134 (3)
O82	0.34079 (6)	0.19625 (6)	0.30838 (3)	0.01308 (3)
O81A	0.20223 (5)	−0.06283 (5)	0.17070 (3)	0.01120 (3)
O81	0.14595 (6)	0.19908 (5)	0.26990 (3)	0.01195 (3)
H2A	0.69640	−0.08668	0.06969	0.02039*
H2	0.14735	0.66984	0.12237	0.03120*
H3A	0.92057	−0.10557	0.10864	0.01902*
H3	0.06458	0.82384	0.02099	0.03259*
H4A	1.01586	0.03506	0.21130	0.01204*
H4	0.08392	0.75686	−0.10630	0.03633*
H5A	0.89041	0.19417	0.27126	0.02055*
H5	0.17467	0.53752	−0.13180	0.03562*
H9A	0.46460	−0.05040	0.20691	0.02188*
H9	0.08793	0.35948	0.14410	0.01197*
H61A	0.56335	0.24046	0.22279	0.01438*
H61	0.27004	0.28785	0.00211	0.02798*
H62A	0.69465	0.29500	0.27381	0.02060*
H62	0.25743	0.33474	−0.08778	0.03080*
H72A	0.62650	0.27446	0.04479	0.02978*
H71	0.46648	0.60556	0.11813	0.03422*
H71A	0.61611	0.13539	−0.00938	0.03364*
H72	0.46046	0.49231	0.04898	0.03282*
H73A	0.50242	0.25672	−0.02204	0.02211*
H73	0.55891	0.46636	0.12907	0.01589*

Atomic displacement parameters (Ų)

	U^11	U^22	U^33	U^12	U^13	U^23
C1	0.0089 (2)	0.0068 (2)	0.0050 (2)	0.0013 (1)	−0.0002 (1)	0.0004 (1)
C1A	0.0057 (2)	0.0076 (2)	0.0065 (2)	0.0002 (1)	−0.0001 (1)	−0.0007 (1)
C2	0.0127 (2)	0.0084 (2)	0.0073 (2)	0.0033 (2)	0.0005 (1)	0.0002 (1)
C2A	0.0078 (2)	0.0088 (2)	0.0084 (2)	0.0004 (1)	0.0002 (1)	−0.0019 (1)
C3	0.0124 (2)	0.0084 (2)	0.0099 (2)	0.0030 (2)	−0.00012 (13)	0.0010 (1)
C3A	0.0074 (2)	0.0100 (2)	0.0104 (2)	0.0011 (1)	0.0010 (1)	−0.0015 (1)
C4	0.0102 (2)	0.0084 (2)	0.0084 (2)	0.0008 (1)	−0.0011 (1)	0.0023 (1)
C4A	0.0063 (1)	0.0103 (2)	0.0091 (2)	0.0010 (1)	0.0006 (1)	−0.00003 (15)
C5	0.0116 (2)	0.0091 (2)	0.0058 (2)	0.0010 (2)	−0.0007 (1)	0.0015 (1)
C5A	0.0061 (2)	0.0100 (2)	0.0077 (2)	−0.0004 (1)	−0.0004 (1)	−0.0006 (1)
C6	0.0093 (2)	0.0073 (2)	0.0052 (2)	0.0012 (1)	−0.0002 (1)	0.0003 (1)
C7A	0.0068 (2)	0.0072 (2)	0.0068 (2)	−0.0004 (1)	0.00002 (12)	0.0014 (1)
C7	0.0067 (2)	0.0086 (2)	0.0056 (2)	−0.0003 (1)	0.0004 (1)	0.0012 (1)
C8A	0.0056 (2)	0.0078 (2)	0.0071 (2)	−0.0003 (1)	−0.0002 (1)	0.0009 (1)
C8	0.0075 (2)	0.0075 (2)	0.0056 (2)	−0.00006 (13)	0.0004 (1)	0.0016 (1)
C9A	0.0060 (1)	0.0089 (2)	0.0066 (2)	0.00006 (13)	−0.0003 (1)	0.0018 (1)
C9	0.0067 (2)	0.0087 (2)	0.0069 (2)	−0.00005 (13)	−0.00006 (12)	0.0012 (1)
C6A	0.0057 (1)	0.0083 (2)	0.0067 (2)	0.0003 (1)	−0.0001 (1)	−0.0011 (1)
C71A	0.0099 (1)	0.0106 (2)	0.0103 (2)	−0.0013 (1)	0.0015 (1)	0.0027 (1)
C71	0.0090 (1)	0.0131 (2)	0.0095 (2)	−0.0021 (1)	0.0017 (1)	0.0017 (1)
N1A	0.0050 (2)	0.0076 (2)	0.0066 (2)	−0.0002 (1)	−0.0006 (1)	0.0011 (1)
N1	0.0063 (1)	0.0077 (2)	0.0050 (2)	0.0003 (1)	−0.0006 (1)	0.0014 (1)
N2A	0.0066 (2)	0.0077 (2)	0.0067 (2)	−0.0003 (1)	−0.0008 (1)	0.0014 (1)
N2	0.0066 (2)	0.0086 (2)	0.0057 (2)	0.0002 (1)	0.00002 (12)	0.0013 (1)
N6A	0.0079 (1)	0.0125 (2)	0.0110 (2)	0.0013 (1)	−0.00001 (13)	−0.0049 (2)
N6	0.0161 (2)	0.0090 (2)	0.0066 (2)	0.0040 (2)	0.0010 (1)	−0.00008 (13)
N8A	0.0056 (1)	0.0080 (2)	0.0087 (2)	0.0002 (1)	0.00001 (12)	0.0006 (2)
N8	0.0097 (2)	0.0081 (2)	0.0066 (2)	−0.00003 (13)	0.0014 (1)	0.0017 (1)
O82A	0.0070 (2)	0.0136 (2)	0.0126 (2)	0.0006 (2)	−0.0021 (2)	0.0031 (2)
O82	0.0133 (2)	0.0167 (2)	0.0090 (2)	0.0032 (2)	0.00016 (17)	0.0060 (2)
O81A	0.0083 (2)	0.0126 (2)	0.0130 (2)	0.0007 (1)	0.0022 (1)	0.0048 (2)
O81	0.0121 (2)	0.0127 (2)	0.0113 (2)	−0.0039 (2)	0.0025 (2)	0.0021 (2)

Geometric parameters (Å, º)

C1—N1	1.4307 (7)	C7—N2	1.3103 (7)
C1—C6	1.3972 (7)	C7—C71	1.4754 (8)
C1—C2	1.3881 (8)	C8A—N8A	1.4240 (8)
C1A—N1A	1.4315 (8)	C8A—N2A	1.3566 (8)
C1A—C6A	1.3966 (7)	C8A—C9A	1.3708 (7)
C1A—C2A	1.3867 (7)	C8—N8	1.4150 (8)
C2—C3	1.3847 (7)	C8—N2	1.3634 (7)
C2—H2	1.083	C8—C9	1.3678 (7)
C2A—C3A	1.3851 (8)	C9A—N1A	1.3632 (7)
C2A—H2A	1.083	C9A—H9A	1.083
C3—C4	1.3885 (8)	C9—N1	1.3617 (7)
C3—H3	1.083	C9—H9	1.083
C3A—C4A	1.3906 (8)	C6A—N6A	1.3719 (8)
C3A—H3A	1.083	C71A—H71A	1.059
C4—C5	1.3832 (8)	C71A—H73A	1.059
C4—H4	1.083	C71A—H72A	1.059
C4A—C5A	1.3812 (7)	C71—H71	1.059
C4A—H4A	1.083	C71—H72	1.059
C5—C6	1.4021 (7)	C71—H73	1.059
C5—H5	1.083	N6A—H62A	1.009
C5A—C6A	1.4045 (7)	N6A—H61A	1.009
C5A—H5A	1.083	N6—H61	1.009
C6—N6	1.3683 (8)	N6—H62	1.009
C7A—N1A	1.3699 (7)	N8A—O82A	1.2214 (7)
C7A—N2A	1.3152 (8)	N8A—O81A	1.2324 (8)
C7A—C71A	1.4755 (8)	N8—O81	1.2278 (8)
C7—N1	1.3747 (7)	N8—O82	1.2281 (8)
C1—N1—C7	125.85 (5)	C7A—C71A—H73A	107.2
C1—N1—C9	126.44 (5)	C7A—C71A—H72A	112.5
C1—C6—N6	121.79 (5)	C7—N1—C9	107.55 (5)
C1—C6—C5	117.08 (6)	C7—N2—C8	104.08 (4)
C1—C2—C3	120.62 (5)	C7—C71—H71	110.2
C1—C2—H2	117.5	C7—C71—H72	110.6
C1A—N1A—C7A	125.33 (5)	C7—C71—H73	109.9
C1A—N1A—C9A	126.86 (6)	C8A—N8A—O82A	118.79 (6)
C1A—C6A—N6A	121.84 (4)	C8A—N8A—O81A	117.42 (5)
C1A—C6A—C5A	116.89 (4)	C8A—C9A—N1A	103.98 (4)
C1A—C2A—C3A	120.08 (4)	C8A—C9A—H9A	134.9
C1A—C2A—H2A	119.2	C8—N8—O81	117.86 (6)
C2—C1—N1	118.86 (5)	C8—N8—O82	118.19 (5)
C2—C1—C6	121.56 (6)	C8—C9—N1	104.05 (5)
C2—C3—C4	118.53 (6)	C8—C9—H9	134.8
C2—C3—H3	120.5	C9A—C8A—N8A	127.14 (6)
C2A—C1A—N1A	118.62 (5)	C9A—C8A—N2A	112.36 (5)
C2A—C1A—C6A	122.04 (4)	C9—C8—N8	125.79 (5)
C2A—C3A—C4A	118.92 (5)	C9—C8—N2	112.58 (4)
C2A—C3A—H3A	120.2	C6A—N6A—H62A	115.0
C3—C2—H2	121.9	C6A—N6A—H61A	117.8
C3—C4—C5	121.01 (6)	C6A—C1A—N1A	119.26 (5)
C3—C4—H4	119.7	C6A—C5A—H5A	118.5
C3A—C2A—H2A	120.7	C71A—C7A—N1A	123.13 (5)
C3A—C4A—C5A	120.84 (4)	C71A—C7A—N2A	125.52 (6)
C3A—C4A—H4A	119.8	C71—C7—N1	122.56 (6)
C4—C5—C6	121.18 (6)	C71—C7—N2	125.66 (5)
C4—C5—H5	121.5	N1A—C7A—N2A	111.31 (5)
C4—C3—H3	121.0	N1A—C9A—H9A	121.2
C4A—C5A—C6A	121.20 (6)	N1—C7—N2	111.73 (4)
C4A—C5A—H5A	120.3	N1—C9—H9	121.1
C4A—C3A—H3A	120.9	N2A—C8A—N8A	120.48 (5)
C5—C6—N6	121.04 (6)	N2—C8—N8	121.60 (5)
C5—C4—H4	119.3	O82A—N8A—O81A	123.79 (6)
C5A—C6A—N6A	121.24 (6)	O82—N8—O81	123.94 (7)
C5A—C4A—H4A	119.3	H61A—N6A—H62A	115.8
C6—N6—H61	119.2	H61—N6—H62	116.5
C6—N6—H62	116.2	H72A—C71A—H71A	107.7
C6—C1—N1	119.56 (4)	H72A—C71A—H73A	109.5
C6—C5—H5	117.3	H71—C71—H72	107.1
C7A—N1A—C9A	107.81 (4)	H71—C71—H73	108.6
C7A—N2A—C8A	104.54 (5)	H71A—C71A—H73A	110.1
C7A—C71A—H71A	109.9	H72—C71—H73	110.4
C1—N1—C7—N2	176.24 (4)	C7A—N1A—C9A—H9A	179.2
C1—N1—C7—C71	−1.32 (4)	C7A—N2A—C8A—N8A	−178.19 (4)
C1—N1—C9—C8	−176.02 (4)	C7A—N2A—C8A—C9A	0.46 (5)
C1—N1—C9—H9	3.5	C7—N1—C9—C8	−0.40 (4)
C1—C6—N6—H61	24.9	C7—N1—C9—H9	179.1
C1—C6—N6—H62	172.5	C7—N2—C8—N8	−177.83 (4)
C1—C6—C5—C4	−0.42 (4)	C7—N2—C8—C9	0.23 (4)
C1—C6—C5—H5	177.9	C8A—N2A—C7A—N1A	−0.45 (4)
C1—C2—C3—C4	−0.76 (5)	C8A—N2A—C7A—C71A	177.58 (4)
C1—C2—C3—H3	179.6	C8—N2—C7—N1	−0.50 (4)
C1A—N1A—C7A—N2A	179.93 (4)	C8—N2—C7—C71	176.97 (4)
C1A—N1A—C7A—C71A	1.85 (4)	C9A—N1A—C7A—N2A	0.29 (4)
C1A—N1A—C9A—C8A	−179.63 (4)	C9A—N1A—C7A—C71A	−177.79 (4)
C1A—N1A—C9A—H9A	−0.4	C9A—N1A—C1A—C6A	−79.82 (4)
C1A—C6A—N6A—H62A	−159.7	C9A—C8A—N8A—O82A	177.62 (5)
C1A—C6A—N6A—H61A	−17.5	C9A—C8A—N8A—O81A	−2.56 (5)
C1A—C6A—C5A—C4A	−1.51 (4)	C9—N1—C7—N2	0.59 (4)
C1A—C6A—C5A—H5A	176.6	C9—N1—C7—C71	−176.97 (4)
C1A—C2A—C3A—C4A	−1.04 (4)	C9—C8—N8—O81	2.67 (5)
C1A—C2A—C3A—H3A	179.8	C9—C8—N8—O82	−176.56 (5)
C2—C1—N1—C7	−99.76 (4)	C6A—C1A—C2A—H2A	−177.2
C2—C1—N1—C9	75.08 (4)	C6A—C5A—C4A—H4A	−178.8
C2—C1—C6—N6	177.71 (4)	N1A—C7A—C71A—H71A	65.5
C2—C1—C6—C5	1.26 (5)	N1A—C7A—C71A—H73A	−174.9
C2—C3—C4—C5	1.61 (5)	N1A—C7A—C71A—H72A	−54.4
C2—C3—C4—H4	−177.8	N1A—C1A—C6A—N6A	5.18 (4)
C2A—C1A—N1A—C7A	−76.30 (4)	N1A—C1A—C2A—H2A	−0.4
C2A—C1A—N1A—C9A	103.27 (4)	N1A—C9A—C8A—N8A	178.25 (4)
C2A—C1A—C6A—N6A	−178.03 (4)	N1A—C9A—C8A—N2A	−0.29 (4)
C2A—C1A—C6A—C5A	−0.03 (5)	N1—C7—C71—H71	70.8
C2A—C3A—C4A—C5A	−0.50 (5)	N1—C7—C71—H72	−47.4
C2A—C3A—C4A—H4A	−179.9	N1—C7—C71—H73	−169.6
C3—C2—C1—N1	177.57 (4)	N1—C1—C6—N6	−0.54 (4)
C3—C2—C1—C6	−0.69 (5)	N1—C1—C2—H2	−1.9
C3—C4—C5—C6	−1.02 (5)	N1—C9—C8—N8	178.08 (4)
C3—C4—C5—H5	−179.3	N1—C9—C8—N2	0.11 (4)
C3A—C2A—C1A—N1A	178.13 (5)	N2A—C7A—C71A—H71A	−112.3
C3A—C2A—C1A—C6A	1.32 (5)	N2A—C7A—C71A—H73A	7.3
C3A—C4A—C5A—C6A	1.81 (5)	N2A—C7A—C71A—H72A	127.8
C3A—C4A—C5A—H5A	−176.3	N2A—C8A—N8A—O82A	−3.94 (5)
C4—C5—C6—N6	−176.89 (4)	N2A—C8A—N8A—O81A	175.88 (5)
C4—C3—C2—H2	178.7	N2A—C8A—C9A—H9A	−179.3
C4A—C5A—C6A—N6A	176.49 (4)	N2—C7—C71—H71	−106.5
C4A—C3A—C2A—H2A	177.5	N2—C7—C71—H72	135.4
C5—C6—N6—H61	−158.8	N2—C7—C71—H73	13.2
C5—C6—N6—H62	−11.2	N2—C8—N8—O81	−179.54 (6)
C5—C6—C1—N1	−176.98 (4)	N2—C8—N8—O82	1.23 (5)
C5—C4—C3—H3	−178.7	N2—C8—C9—H9	−179.3
C5A—C6A—N6A—H62A	22.4	N6A—C6A—C5A—H5A	−5.4
C5A—C6A—N6A—H61A	164.6	N6—C6—C5—H5	1.4
C5A—C6A—C1A—N1A	−176.83 (4)	N8A—C8A—C9A—H9A	−0.8
C5A—C4A—C3A—H3A	178.7	N8—C8—C9—H9	−1.3
C6—C1—N1—C7	78.54 (4)	H2A—C2A—C3A—H3A	−1.7
C6—C1—N1—C9	−106.63 (4)	H2—C2—C3—H3	−1.0
C6—C1—C2—H2	179.8	H3A—C3A—C4A—H4A	−0.7
C6—C5—C4—H4	178.4	H3—C3—C4—H4	1.9
C7A—N1A—C1A—C6A	100.61 (4)	H4A—C4A—C5A—H5A	3.1
C7A—N1A—C9A—C8A	0.02 (4)	H4—C4—C5—H5	0.1

Hydrogen-bond geometry (Å, º)

D—H···A	D—H	H···A	D···A	D—H···A
N6—H62···O82^i	1.009	2.250	3.1659 (9)	150.3
N6A—H61A···C9A	1.009	2.826	3.3247 (9)	111.1
N6A—H61A···N1A	1.009	2.474	2.8235 (8)	99.6
N6A—H61A···N2	1.009	2.202	3.1656 (9)	159.2
N6—H61···C7	1.009	2.983	3.3367 (9)	101.7
N6—H61···N1	1.009	2.547	2.8250 (7)	95.3
N6—H61···N2A	1.009	2.140	3.0527 (9)	149.5
C71A—H71A···C2A	1.059	3.016	3.4145 (9)	103.0
C71—H72···C6	1.059	2.881	3.473 (1)	115.7
C3—H3···O82A^ii	1.083	2.672	3.5506 (9)	137.9
C9A—H9A···N2^iii	1.083	2.453	3.435 (1)	150.2
C4A—H4A···O81A^iv	1.083	2.469	3.3671 (8)	139.6
C4A—H4A···O81^iv	1.083	2.349	3.1386 (10)	128.4
C2A—H2A···N2A^v	1.083	2.404	3.4114 (9)	154.2
N6A—H62A···O81A^vi	1.009	2.016	3.0231 (9)	175.4
C71—H71···O82^vi	1.059	2.534	3.1103 (10)	113.4

Symmetry codes: (i) x, −y+1/2, z−1/2; (ii) x, y+1, z; (iii) −x+1, y−1/2, −z+1/2; (iv) x+1, y, z; (v) −x+1, −y, −z; (vi) −x+1, y+1/2, −z+1/2.

(I_70K)

Crystal data

C10H10N4O2	V = 2070.5 (4) Å^3
Mr = 218.22	Z = 8
Monoclinic, P21/c	F(000) = 912
Hall symbol: -P 2ybc	Dx = 1.400 Mg m^−3
a = 11.047 (1) Å	Mo Kα radiation, λ = 0.71073 Å
b = 10.129 (1) Å	T = 70 K
c = 18.652 (2) Å	Cube, yellowish
β = 97.223 (3)°	× × mm

Data collection

Radiation source: fine-focus sealed tube	h = −24→21
26563 independent reflections	k = 0→24
17713 reflections with > 2.0σ(I)	l = 0→44
θmax = 58.6°, θmin = 4.1°

Refinement

Refinement on F	542 restraints
Least-squares matrix: full	Primary atom site location: structure-invariant direct methods
R[F^2 > 2σ(F^2)] = 0.029	Secondary atom site location: difference Fourier map
wR(F^2) = 0.028	Hydrogen site location: inferred from neighbouring sites
S = 0.95	H-atom parameters constrained
17738 reflections	Weighting scheme based on measured s.u.'s
873 parameters	(Δ/σ)max = 0.002

Special details

Refinement. Refinement of F¹ against reflections. The threshold expression of F² > σ(F²) is used for calculating R-factors(gt) and is not relevant to the choice of reflections for refinement. R-factors based on F² are statistically about twice as large as those based on F, and R-factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Ų)

	x	y	z	Uiso*/Ueq
C1	0.20202 (3)	0.52135 (3)	0.05170 (1)	0.00984 (1)
C1A	0.66989 (3)	0.05745 (2)	0.15155 (1)	0.00908 (1)
C2	0.14993 (4)	0.64293 (3)	0.06643 (1)	0.01388 (2)
C2A	0.74111 (3)	−0.02827 (3)	0.11562 (1)	0.01160 (2)
C3	0.10510 (4)	0.72790 (3)	0.01038 (2)	0.01537 (2)
C3A	0.86625 (3)	−0.03705 (3)	0.13691 (2)	0.01310 (2)
C4	0.11429 (4)	0.68934 (3)	−0.06078 (1)	0.01337 (2)
C4A	0.91889 (3)	0.04283 (3)	0.19387 (1)	0.01195 (2)
C5	0.16459 (3)	0.56763 (3)	−0.07579 (1)	0.01275 (2)
C5A	0.84834 (3)	0.13032 (3)	0.22852 (1)	0.01099 (1)
C6	0.20962 (3)	0.47966 (3)	−0.01965 (1)	0.01050 (1)
C7A	0.49113 (3)	0.13534 (2)	0.06599 (1)	0.00968 (1)
C7	0.37423 (3)	0.42881 (3)	0.13810 (1)	0.00954 (1)
C8A	0.34456 (3)	0.04933 (2)	0.11357 (1)	0.00929 (1)
C8	0.27555 (3)	0.31307 (2)	0.20614 (1)	0.00939 (1)
C9A	0.44801 (3)	0.01100 (3)	0.15799 (1)	0.00988 (1)
C9	0.18756 (3)	0.36502 (3)	0.15510 (1)	0.01023 (1)
C6A	0.72075 (3)	0.13888 (3)	0.20878 (1)	0.00961 (1)
C71A	0.56528 (4)	0.20545 (3)	0.01663 (2)	0.01425 (2)
C71	0.47094 (4)	0.50164 (3)	0.10617 (1)	0.01484 (2)
N1A	0.54157 (3)	0.06721 (2)	0.12667 (1)	0.00906 (1)
N1	0.25189 (3)	0.43900 (2)	0.11127 (1)	0.00923 (1)
N2A	0.37057 (3)	0.12618 (3)	0.05724 (1)	0.01009 (1)
N2	0.39083 (3)	0.35175 (2)	0.19576 (1)	0.00979 (1)
N6A	0.64989 (3)	0.22100 (3)	0.24547 (2)	0.01536 (2)
N6	0.26437 (4)	0.36216 (3)	−0.03454 (1)	0.01594 (2)
N8A	0.22087 (3)	0.01456 (2)	0.12069 (1)	0.01088 (1)
N8	0.25463 (3)	0.23112 (2)	0.26584 (1)	0.01210 (2)
O82A	0.13884 (4)	0.06073 (4)	0.07749 (2)	0.01669 (2)
O82	0.34298 (6)	0.19778 (4)	0.30926 (2)	0.02013 (3)
O81A	0.20357 (4)	−0.06157 (3)	0.17061 (2)	0.01663 (2)
O81	0.14829 (5)	0.19903 (4)	0.27138 (2)	0.01794 (2)
H2A	0.69698	−0.08516	0.07056	0.02611
H2	0.14666	0.66810	0.12259	0.02646
H3A	0.92327	−0.10198	0.10945	0.02809
H3	0.06796	0.82292	0.02285	0.02890
H4A	1.01615	0.03735	0.21095	0.02937
H4	0.08253	0.75656	−0.10426	0.03101
H5A	0.88904	0.19590	0.27068	0.02872
H5	0.17360	0.53746	−0.13057	0.02986
H9A	0.46422	−0.04833	0.20655	0.02610
H9	0.08908	0.35624	0.14726	0.02594
H61A	0.56365	0.24140	0.22368	0.02383
H61	0.27105	0.28848	0.00215	0.02378
H62A	0.69512	0.29419	0.27415	0.02591
H62	0.25529	0.33643	−0.08720	0.02617
H72A	0.62592	0.27512	0.04400	0.03185
H71	0.46663	0.60387	0.11748	0.03277
H71A	0.61903	0.13627	−0.00790	0.03253
H72	0.45989	0.48984	0.04931	0.03187
H73A	0.50338	0.25485	−0.02235	0.03216
H73	0.55729	0.46516	0.12864	0.03184

Atomic displacement parameters (Ų)

	U^11	U^22	U^33	U^12	U^13	U^23
C1	0.0118 (1)	0.00990 (7)	0.00753 (6)	0.00171 (7)	−0.000018 (6)	0.00064 (5)
C1A	0.0078 (1)	0.00971 (8)	0.00945 (6)	0.00039 (6)	0.000004 (6)	−0.00069 (5)
C2	0.0183 (2)	0.01200 (9)	0.01110 (7)	0.00478 (8)	0.00089 (8)	−0.000044 (6)
C2A	0.0105 (1)	0.01180 (8)	0.01235 (7)	0.00122 (7)	0.00070 (7)	−0.00258 (6)
C3	0.0187 (2)	0.01160 (9)	0.01524 (9)	0.00454 (9)	−0.000033 (9)	0.00162 (7)
C3A	0.0102 (1)	0.01409 (9)	0.01513 (8)	0.00237 (8)	0.00219 (8)	−0.00199 (7)
C4	0.0143 (1)	0.01181 (9)	0.01300 (8)	0.00072 (8)	−0.00200 (8)	0.00395 (6)
C4A	0.0081 (1)	0.01474 (9)	0.01297 (7)	0.00132 (7)	0.00115 (7)	0.00058 (6)
C5	0.0160 (1)	0.01285 (9)	0.00869 (6)	0.00114 (8)	−0.00113 (7)	0.00245 (6)
C5A	0.0079 (1)	0.01438 (9)	0.01041 (6)	−0.00010 (7)	0.00008 (6)	−0.00067 (6)
C6	0.0136 (1)	0.01029 (8)	0.00724 (6)	0.00150 (7)	−0.00028 (6)	0.00076 (5)
C7A	0.0094 (1)	0.00955 (7)	0.00976 (6)	−0.00074 (6)	−0.00008 (6)	0.00131 (5)
C7	0.0095 (1)	0.01139 (8)	0.00768 (6)	−0.00041 (7)	0.00073 (6)	0.00121 (5)
C8A	0.0081 (1)	0.00957 (8)	0.00986 (6)	0.000018 (6)	−0.00007 (6)	0.00070 (5)
C8	0.0104 (1)	0.01001 (8)	0.00767 (6)	0.000019 (6)	0.00094 (6)	0.00124 (5)
C9A	0.0086 (1)	0.01108 (8)	0.00964 (6)	0.00027 (6)	0.00007 (6)	0.00187 (5)
C9	0.0092 (1)	0.01201 (8)	0.00930 (6)	−0.00029 (7)	0.00048 (7)	0.00131 (6)
C6A	0.0077 (1)	0.01133 (8)	0.00956 (6)	0.00025 (6)	0.00029 (6)	−0.00133 (5)
C71A	0.0140 (1)	0.01424 (9)	0.01458 (8)	−0.00182 (8)	0.00224 (8)	0.00396 (7)
C71	0.0127 (1)	0.0189 (1)	0.01308 (8)	−0.00342 (9)	0.00234 (8)	0.00307 (7)
N1A	0.0077 (1)	0.00987 (7)	0.00921 (6)	−0.00014 (6)	−0.00041 (6)	0.00098 (5)
N1	0.0096 (1)	0.01056 (7)	0.00724 (5)	0.00049 (6)	0.000047 (5)	0.00148 (5)
N2A	0.0096 (1)	0.01005 (8)	0.01004 (6)	−0.000019 (6)	−0.00090 (7)	0.00142 (5)
N2	0.0096 (1)	0.01175 (8)	0.00773 (5)	0.00060 (6)	0.000006 (6)	0.00116 (5)
N6A	0.0105 (1)	0.0186 (1)	0.01667 (8)	0.00192 (8)	0.00015 (8)	−0.00797 (8)
N6	0.0255 (2)	0.01311 (9)	0.00905 (6)	0.00628 (9)	0.00144 (7)	−0.00017 (5)
N8A	0.0082 (1)	0.01091 (7)	0.01339 (7)	0.00053 (6)	0.00064 (6)	0.00079 (6)
N8	0.0161 (1)	0.01111 (7)	0.00938 (6)	−0.000050 (7)	0.00281 (7)	0.00226 (5)
O82A	0.0096 (2)	0.0199 (1)	0.0196 (1)	0.00066 (9)	−0.00217 (10)	0.00449 (10)
O82	0.0216 (2)	0.0251 (2)	0.01374 (9)	0.0058 (1)	0.0022 (1)	0.00975 (10)
O81A	0.0111 (2)	0.0185 (1)	0.02085 (10)	0.00172 (9)	0.00442 (10)	0.00759 (9)
O81	0.0197 (2)	0.0183 (1)	0.01654 (9)	−0.00661 (10)	0.0050 (1)	0.00258 (8)
H2A	0.0235	0.0298	0.0236	−0.0001	−0.0028	−0.0089
H2	0.0345	0.0276	0.0169	0.0049	0.0016	−0.0031
H3A	0.0219	0.0314	0.0311	0.0059	0.0037	−0.0090
H3	0.0375	0.0197	0.0287	0.0091	0.0009	−0.0017
H4A	0.0153	0.0352	0.0360	0.0023	−0.0034	−0.0071
H4	0.0430	0.0266	0.0223	0.0102	−0.0007	0.0080
H5A	0.0242	0.0303	0.0296	−0.0007	−0.0046	−0.0116
H5	0.0423	0.0316	0.0156	0.0091	0.0033	0.0001
H9A	0.0255	0.0296	0.0227	0.0006	0.0011	0.0120
H9	0.0151	0.0333	0.0291	−0.0006	0.0016	0.0050
H61A	0.0175	0.0268	0.0257	0.0028	−0.0032	−0.0006
H61	0.0318	0.0204	0.0187	0.0015	0.0013	0.0048
H62A	0.0242	0.0242	0.0275	−0.0012	−0.0040	−0.0068
H62	0.0360	0.0276	0.0143	0.0034	0.0007	−0.0016
H72A	0.0338	0.0348	0.0268	−0.0147	0.0034	−0.0044
H71	0.0378	0.0174	0.0451	−0.0019	0.0128	−0.0038
H71A	0.0369	0.0278	0.0363	0.0077	0.0179	−0.0012
H72	0.0368	0.0415	0.0174	−0.0095	0.0040	−0.0007
H73A	0.0264	0.0413	0.0278	0.0057	−0.0005	0.0144
H73	0.0192	0.0364	0.0389	0.0032	−0.0005	0.0115

Geometric parameters (Å, º)

C1—N1	1.4422 (4)	C7—N2	1.3229 (4)
C1—C6	1.4087 (4)	C7—C71	1.4833 (5)
C1—C2	1.4011 (5)	C8A—N8A	1.4333 (5)
C1A—N1A	1.4385 (5)	C8A—N2A	1.3669 (4)
C1A—C6A	1.4089 (5)	C8A—C9A	1.3803 (5)
C1A—C2A	1.3980 (5)	C8—N8	1.4307 (4)
C2—C3	1.3959 (5)	C8—N2	1.3692 (5)
C2—H2	1.083	C8—C9	1.3767 (5)
C2A—C3A	1.3924 (6)	C9A—N1A	1.3732 (5)
C2A—H2A	1.083	C9A—H9A	1.083
C3—C4	1.3994 (5)	C9—N1	1.3715 (4)
C3—H3	1.083	C9—H9	1.083
C3A—C4A	1.4022 (5)	C6A—N6A	1.3812 (5)
C3A—H3A	1.083	C71A—H71A	1.059
C4—C5	1.3951 (5)	C71A—H73A	1.059
C4—H4	1.083	C71A—H72A	1.059
C4A—C5A	1.3917 (5)	C71—H73	1.059
C4A—H4A	1.083	C71—H72	1.059
C5—C6	1.4167 (4)	C71—H71	1.059
C5—H5	1.083	N6A—H62A	1.009
C5A—C6A	1.4140 (5)	N6A—H61A	1.009
C5A—H5A	1.083	N6—H62	1.009
C6—N6	1.3790 (5)	N6—H61	1.009
C7A—N1A	1.3817 (4)	N8A—O82A	1.2270 (6)
C7A—N2A	1.3245 (5)	N8A—O81A	1.2421 (4)
C7A—C71A	1.4875 (5)	N8—O82	1.2344 (6)
C7—N1	1.3847 (5)	N8—O81	1.2357 (6)
C1—N1—C7	125.62 (3)	C7A—C71A—H73A	107.0
C1—N1—C9	126.79 (3)	C7A—C71A—H72A	112.6
C1—C6—N6	121.92 (3)	C7—N1—C9	107.41 (3)
C1—C6—C5	116.91 (3)	C7—N2—C8	104.33 (3)
C1—C2—C3	120.72 (3)	C7—C71—H73	109.0
C1—C2—H2	117.5	C7—C71—H72	110.3
C1A—N1A—C7A	125.32 (3)	C7—C71—H71	110.7
C1A—N1A—C9A	126.75 (4)	C8A—N8A—O82A	118.64 (4)
C1A—C6A—N6A	122.09 (3)	C8A—N8A—O81A	117.41 (4)
C1A—C6A—C5A	116.80 (3)	C8A—C9A—N1A	103.81 (2)
C1A—C2A—C3A	120.09 (3)	C8A—C9A—H9A	134.1
C1A—C2A—H2A	118.5	C8—N8—O82	118.53 (3)
C2—C1—N1	118.94 (3)	C8—N8—O81	117.78 (4)
C2—C1—C6	121.57 (3)	C8—C9—N1	104.32 (3)
C2—C3—C4	118.49 (4)	C8—C9—H9	132.2
C2—C3—H3	119.7	C9A—C8A—N8A	127.03 (4)
C2A—C1A—N1A	118.64 (4)	C9A—C8A—N2A	112.55 (3)
C2A—C1A—C6A	122.14 (3)	C9—C8—N8	126.22 (3)
C2A—C3A—C4A	118.78 (3)	C9—C8—N2	112.41 (2)
C2A—C3A—H3A	121.3	C6A—N6A—H62A	115.6
C3—C2—H2	121.8	C6A—N6A—H61A	119.3
C3—C4—C5	121.01 (3)	C6A—C1A—N1A	119.14 (3)
C3—C4—H4	118.7	C6A—C5A—H5A	117.4
C3A—C2A—H2A	121.4	C71A—C7A—N1A	123.28 (3)
C3A—C4A—C5A	121.08 (3)	C71A—C7A—N2A	125.49 (4)
C3A—C4A—H4A	119.7	C71—C7—N1	122.50 (4)
C4—C5—C6	121.28 (3)	C71—C7—N2	125.92 (3)
C4—C5—H5	121.7	N1A—C7A—N2A	111.21 (3)
C4—C3—H3	121.8	N1A—C9A—H9A	122.1
C4A—C5A—C6A	121.08 (4)	N1—C7—N2	111.53 (3)
C4A—C5A—H5A	121.5	N1—C9—H9	123.5
C4A—C3A—H3A	119.9	N2A—C8A—N8A	120.41 (4)
C5—C6—N6	121.07 (3)	N2—C8—N8	121.35 (3)
C5—C4—H4	120.3	O82A—N8A—O81A	123.94 (4)
C5A—C6A—N6A	121.09 (4)	O82—N8—O81	123.69 (5)
C5A—C4A—H4A	119.3	H61A—N6A—H62A	116.3
C6—N6—H62	115.3	H61—N6—H62	117.3
C6—N6—H61	119.9	H72A—C71A—H71A	107.1
C6—C1—N1	119.47 (2)	H72A—C71A—H73A	109.3
C6—C5—H5	117.0	H71—C71—H73	108.9
C7A—N1A—C9A	107.94 (2)	H71—C71—H72	107.9
C7A—N2A—C8A	104.50 (3)	H71A—C71A—H73A	111.4
C7A—C71A—H71A	109.5	H72—C71—H73	110.0
C1—N1—C7—N2	176.04 (3)	C7A—N1A—C9A—H9A	179.7
C1—N1—C7—C71	−1.58 (3)	C7A—N2A—C8A—N8A	−178.21 (2)
C1—N1—C9—C8	−175.74 (2)	C7A—N2A—C8A—C9A	0.48 (2)
C1—N1—C9—H9	3.7	C7—N1—C9—C8	−0.40 (2)
C1—C6—N6—H62	172.5	C7—N1—C9—H9	179.0
C1—C6—N6—H61	23.6	C7—N2—C8—N8	−177.80 (3)
C1—C6—C5—C4	−0.48 (2)	C7—N2—C8—C9	0.32 (3)
C1—C6—C5—H5	177.6	C8A—N2A—C7A—N1A	−0.50 (3)
C1—C2—C3—C4	−0.52 (3)	C8A—N2A—C7A—C71A	177.67 (3)
C1—C2—C3—H3	−177.9	C8—N2—C7—N1	−0.58 (2)
C1A—N1A—C7A—N2A	−179.96 (2)	C8—N2—C7—C71	176.94 (2)
C1A—N1A—C7A—C71A	1.83 (2)	C9A—N1A—C7A—N2A	0.36 (2)
C1A—N1A—C9A—C8A	−179.73 (2)	C9A—N1A—C7A—C71A	−177.86 (2)
C1A—N1A—C9A—H9A	0.0	C9A—N1A—C1A—C6A	−80.02 (2)
C1A—C6A—N6A—H62A	−161.9	C9A—C8A—N8A—O82A	177.77 (4)
C1A—C6A—N6A—H61A	−15.7	C9A—C8A—N8A—O81A	−2.47 (3)
C1A—C6A—C5A—C4A	−1.58 (3)	C9—N1—C7—N2	0.64 (3)
C1A—C6A—C5A—H5A	177.1	C9—N1—C7—C71	−176.98 (3)
C1A—C2A—C3A—C4A	−1.00 (3)	C9—C8—N8—O82	−176.27 (3)
C1A—C2A—C3A—H3A	−179.3	C9—C8—N8—O81	2.86 (3)
C2—C1—N1—C7	−99.63 (3)	C6A—C1A—C2A—H2A	−177.4
C2—C1—N1—C9	74.89 (2)	C6A—C5A—C4A—H4A	−178.9
C2—C1—C6—N6	177.81 (3)	N1A—C7A—C71A—H71A	63.6
C2—C1—C6—C5	1.35 (2)	N1A—C7A—C71A—H73A	−175.5
C2—C3—C4—C5	1.38 (3)	N1A—C7A—C71A—H72A	−55.4
C2—C3—C4—H4	−177.8	N1A—C1A—C6A—N6A	4.90 (3)
C2A—C1A—N1A—C7A	−76.58 (2)	N1A—C1A—C2A—H2A	−0.6
C2A—C1A—N1A—C9A	103.04 (3)	N1A—C9A—C8A—N8A	178.32 (2)
C2A—C1A—C6A—N6A	−178.28 (3)	N1A—C9A—C8A—N2A	−0.26 (3)
C2A—C1A—C6A—C5A	0.10 (3)	N1—C7—C71—H73	−169.3
C2A—C3A—C4A—C5A	−0.47 (3)	N1—C7—C71—H72	−48.4
C2A—C3A—C4A—H4A	−179.8	N1—C7—C71—H71	71.0
C3—C2—C1—N1	177.40 (3)	N1—C1—C6—N6	−0.46 (2)
C3—C2—C1—C6	−0.87 (3)	N1—C1—C2—H2	−2.2
C3—C4—C5—C6	−0.89 (3)	N1—C9—C8—N8	178.07 (3)
C3—C4—C5—H5	−178.9	N1—C9—C8—N2	0.06 (3)
C3A—C2A—C1A—N1A	178.03 (3)	N2A—C7A—C71A—H71A	−114.3
C3A—C2A—C1A—C6A	1.20 (3)	N2A—C7A—C71A—H73A	6.5
C3A—C4A—C5A—C6A	1.80 (3)	N2A—C7A—C71A—H72A	126.6
C3A—C4A—C5A—H5A	−176.8	N2A—C8A—N8A—O82A	−3.74 (4)
C4—C5—C6—N6	−176.97 (3)	N2A—C8A—N8A—O81A	176.01 (3)
C4—C3—C2—H2	179.0	N2A—C8A—C9A—H9A	−180.0
C4A—C5A—C6A—N6A	176.82 (2)	N2—C7—C71—H73	13.4
C4A—C3A—C2A—H2A	177.6	N2—C7—C71—H72	134.3
C5—C6—N6—H62	−11.2	N2—C7—C71—H71	−106.3
C5—C6—N6—H61	−160.1	N2—C8—N8—O82	1.57 (3)
C5—C6—C1—N1	−176.92 (2)	N2—C8—N8—O81	−179.30 (4)
C5—C4—C3—H3	178.7	N2—C8—C9—H9	−179.3
C5A—C6A—N6A—H62A	19.8	N6A—C6A—C5A—H5A	−4.5
C5A—C6A—N6A—H61A	166.0	N6—C6—C5—H5	1.2
C5A—C6A—C1A—N1A	−176.72 (2)	N8A—C8A—C9A—H9A	−1.4
C5A—C4A—C3A—H3A	177.9	N8—C8—C9—H9	−1.3
C6—C1—N1—C7	78.67 (2)	H2A—C2A—C3A—H3A	−0.7
C6—C1—N1—C9	−106.80 (2)	H2—C2—C3—H3	1.6
C6—C1—C2—H2	179.6	H3A—C3A—C4A—H4A	−1.5
C6—C5—C4—H4	178.3	H3—C3—C4—H4	−0.5
C7A—N1A—C1A—C6A	100.35 (2)	H4A—C4A—C5A—H5A	2.5
C7A—N1A—C9A—C8A	−0.05 (2)	H4—C4—C5—H5	0.3

Hydrogen-bond geometry (Å, º)

D—H···A	D—H	H···A	D···A	D—H···A
N6—H62···O82^i	1.009	2.293	3.2011 (6)	149.1
N6A—H61A···C9A	1.009	2.861	3.3535 (7)	110.7
N6A—H61A···N1A	1.009	2.517	2.8464 (6)	98.5
N6A—H61A···N2	1.009	2.217	3.1838 (7)	160.0
N6—H61···C7	1.009	3.004	3.3637 (6)	102.1
N6—H61···N1	1.009	2.573	2.8488 (4)	95.3
N6—H61···N2A	1.009	2.164	3.0847 (6)	150.9
C71A—H71A···C2A	1.059	3.020	3.4475 (7)	104.9
C71—H72···C6	1.059	2.901	3.4910 (9)	115.6
C3—H3···O82A^ii	1.083	2.693	3.5993 (6)	140.9
C9A—H9A···N2^iii	1.083	2.485	3.4629 (7)	149.6
C4A—H4A···O81A^iv	1.083	2.500	3.3971 (7)	139.5
C4A—H4A···O81^iv	1.083	2.381	3.1771 (8)	129.1
C2A—H2A···N2A^v	1.083	2.442	3.4497 (7)	154.2
N6A—H62A···O81A^vi	1.009	2.039	3.0469 (7)	176.3
C71—H71···O82^vi	1.059	2.544	3.1377 (7)	114.7

Symmetry codes: (i) x, −y+1/2, z−1/2; (ii) x, y+1, z; (iii) −x+1, y−1/2, −z+1/2; (iv) x+1, y, z; (v) −x+1, −y, −z; (vi) −x+1, y+1/2, −z+1/2.

 

Footnotes

‡Current address: European Synchrotron Radiation Facility (ESRF), 6 Rue Jules Horowitz, BP 220, 38043 Grenoble CEDEX 9, France.

§Current address: Department of Chemistry, University at Buffalo, The State University of New York, Buffalo, NY 14260-3000, USA.