research papers\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

IUCrJ
Volume 2| Part 5| September 2015| Pages 563-574
ISSN: 2052-2525

Qu­antitative analysis of intermolecular interactions in orthorhombic rubrene

CROSSMARK_Color_square_no_text.svg

aCenter for Materials Crystallography, Department of Chemistry and iNANO, Aarhus University, Langelandsgade 140, Aarhus C DK-8000, Denmark, bChemical and Engineering Materials Division, Neutron Sciences Directorate, Oak Ridge National Laboratory, PO Box 2008 - MS 6475, Oak Ridge, TN 37831, USA, and cJapan Synchrotron Radiation Research Institute, I-I-I, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198, Japan
*Correspondence e-mail: jacobo@chem.au.dk, bo@chem.au.dk

Edited by C. Lecomte, Université de Lorraine, France (Received 20 April 2015; accepted 24 June 2015; online 14 August 2015)

Rubrene is one of the most studied organic semiconductors to date due to its high charge carrier mobility which makes it a potentially applicable compound in modern electronic devices. Previous electronic device characterizations and first principles theoretical calculations assigned the semiconducting properties of rubrene to the presence of a large overlap of the extended π-conjugated core between molecules. We present here the electron density distribution in rubrene at 20 K and at 100 K obtained using a combination of high-resolution X-ray and neutron diffraction data. The topology of the electron density and energies of intermolecular interactions are studied quantitatively. Specifically, the presence of Cπ⋯Cπ interactions between neighbouring tetracene backbones of the rubrene molecules is experimentally confirmed from a topological analysis of the electron density, Non-Covalent Interaction (NCI) analysis and the calculated interaction energy of molecular dimers. A significant contribution to the lattice energy of the crystal is provided by H—H interactions. The electron density features of H—H bonding, and the interaction energy of molecular dimers connected by H—H interaction clearly demonstrate an importance of these weak interactions in the stabilization of the crystal structure. The quantitative nature of the intermolecular interactions is virtually unchanged between 20 K and 100 K suggesting that any changes in carrier transport at these low temperatures would have a different origin. The obtained experimental results are further supported by theoretical calculations.

1. Introduction

Semiconductors are essential components of all modern electronic devices that we depend on in our daily life. Recently, organic semiconducting materials based on acenes, heteroacenes and thiophenes have received an intensive academic and commercial interest due to their promising optoelectronic and charge transfer properties (Coropceanu et al., 2007[Coropceanu, V., Cornil, J., da Silva Filho, D. A., Olivier, Y., Silbey, R. & Brédas, J. L. (2007). Chem. Rev. 107, 926-952.]; Murphy & Fréchet, 2007[Murphy, A. R. & Fréchet, J. M. J. (2007). Chem. Rev. 107, 1066-1096.]; Yassar, 2014[Yassar, A. (2014). Polym. Sci. Ser. C. 56, 4-19.]). The design and synthesis of new functional π-conjugated materials is a major interest in the scientific community aiming to develop all organic or hybrid organic inorganic electronic devices such as Organic Light Emitting Diodes (OLED) (Reineke et al., 2013[Reineke, S., Thomschke, M., Lüssem, B. & Leo, K. (2013). Rev. Mod. Phys. 85, 1245-1293.]), Organic Field Effect Transistors (OFET) (Facchetti, 2007[Facchetti, A. (2007). Mater. Today, 10, 28-37.]; Reese & Bao, 2007[Reese, C. & Bao, Z. N. (2007). Mater. Today, 10, 20-27.]; Yamashita, 2009[Yamashita, Y. (2009). Sci. Technol. Adv. Mater. 10, 024313.]; Dong et al., 2010[Dong, H. L., Wang, C. L. & Hu, W. P. (2010). Chem. Commun. 46, 5211-5222.]), photovoltaic cells (Mishra & Bäuerle, 2012[Mishra, A. & Bäuerle, P. (2012). Angew. Chem. Int. Ed. 51, 2020-2067.]), sensors (Mannsfeld et al., 2010[Mannsfeld, S. C. B., Tee, B. C. K., Stoltenberg, R. M., Chen, C. V. H. H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C. & Bao, Z. N. (2010). Nat. Mater. 9, 859-864.]) and radio frequency identification (RFID) tags (Subramanian et al., 2005[Subramanian, V., Chang, P. C., Lee, J. B., Molesa, S. E. & Volkman, S. K. (2005). IEEE T Compon Pack T 28, 742-747.]). Field effect hole and electron mobilities as high as 40 cm2 V−1 S−1 and 11 cm2 V−1 S−1 respectively, have been achieved for organic semiconductors which, remarkably, are higher than those seen for amorphous silicon (Jurchescu et al., 2007[Jurchescu, O. D., Popinciuc, M., van Wees, B. J. & Palstra, T. T. M. (2007). Adv. Mater. 19, 688-692.]; Li et al., 2012[Li, H. Y., Tee, B. C. K., Cha, J. J., Cui, Y., Chung, J. W., Lee, S. Y. & Bao, Z. N. (2012). J. Am. Chem. Soc. 134, 2760-2765.]). The main advantage of using organic semiconducting materials in device fabrication is that they offer a low cost alternative to silicon; they are also light-weight, and their synthesis and easy processing into devices makes them extremely flexible. Indeed, they can be suitably modified to meet the compatibility of solution process techniques in contrast to expensive lithography and vacuum deposition methods, normally needed for their inorganic counterparts. However, the performance of most recent organic electronic devices is still limited by the relatively low carrier mobility compared with inorganic materials.

To achieve higher mobility of charge carriers in organic materials, the molecule must possess an extended π-conjugated core and it must crystalize with strong ππ overlap between the molecules in the crystalline state (Yassar, 2014[Yassar, A. (2014). Polym. Sci. Ser. C. 56, 4-19.]). It is often assumed that crystal packing of molecules in herringbone, one-dimensional or two-dimensional planar π-stacking motifs with the absence of edge-to-face interactions would result in higher charge mobility. Edge-to-face interactions result in a slippage of aromatic stacking and thus, lower charge mobility. However, a quantitative correlation of the microscopic molecular and crystal structure properties with the macroscopic properties such as the mobility is still lacking in organic semiconductors.

Single crystals of organic semiconductors have been the main focus of research as they provide relevant information about intrinsic and anisotropic charge mobilities and they have several advantages over polycrystalline thin films (Podzorov, 2013[Podzorov, V. (2013). MRS Bull. 38, 15-24.]; Jiang & Kloc, 2013[Jiang, H. & Kloc, C. (2013). MRS Bull. 38, 28-33.]; Lezama & Morpurgo, 2013[Lezama, I. G. & Morpurgo, A. F. (2013). MRS Bull. 38, 51-56.]). The primary advantage is the availability of high purity compounds for device fabrication and minimization of the charge trapping by elimination of grain boundaries in single crystals. On the other hand, growing large single crystals for device fabrication is time consuming and the resulting crystals are often very brittle. Additionally, it is difficult to make electrical contacts without introducing any strain or damage to the crystals (Podzorov, 2013[Podzorov, V. (2013). MRS Bull. 38, 15-24.]). The orthorhombic polymorph of rubrene (5,6,11,12-tetraphenyltetracene) is one of the most explored organic semiconductors due to its attractive semiconducting properties. It has nearly 100% fluorescence quantum efficiency in solution (Strickler & Berg, 1962[Strickler, S. J. & Berg, R. A. (1962). J. Chem. Phys. 37, 814-822.]), which is promising for the design of OLEDs. Single crystals show p-type characteristics with high charge mobility up to 20 cm2 V−1 S−1 (Podzorov et al., 2004[Podzorov, V., Menard, E., Borissov, A., Kiryukhin, V., Rogers, J. A. & Gershenson, M. E. (2004). Phys. Rev. Lett. pp. 93.]; Hulea et al., 2006[Hulea, I. N., Fratini, S., Xie, H., Mulder, C. L., Iossad, N. N., Rastelli, G., Ciuchi, S. & Morpurgo, A. F. (2006). Nat. Mater. 5, 982-986.]; Hasegawa & Takeya, 2009[Hasegawa, T. & Takeya, J. (2009). Sci. Technol. Adv. Mater. pp. 10.]; Takahashi et al., 2006[Takahashi, T., Takenobu, T., Takeya, J. & Iwasa, Y. (2006). Appl. Phys. Lett. pp. 88.]). The large charge-carrier mobility measured in rubrene has been attributed to the herringbone packing motif in the orthorhombic crystalline polymorph which provides high spatial overlap of the π-conjugated tetracene backbone (see Fig. 1[link]c). The charge transport properties of rubrene are severely affected when it undergoes an oxidation in the presence of UV light and O2 to form rubrene endoperoxide, which lead to less aromaticity in the tetracene backbone by a formation of a kink in the backbone and consequently a loss of the π-stacking interactions (Fumagalli et al., 2011[Fumagalli, E., Raimondo, L., Silvestri, L., Moret, M., Sassella, A. & Campione, M. (2011). Chem. Mater. 23, 3246-3253.]; Mastrogiovanni et al., 2014[Mastrogiovanni, D. D. T., Mayer, J., Wan, A. S., Vishnyakov, A., Neimark, A. V., Podzorov, V., Feldman, L. C. & Garfunkel, E. (2014). Sci. Rep. 4, 4753.]) as well as the semiconducting properties. Recently, the mechanical properties of rubrene single crystals have also been investigated to understand the performance limit, processability and design of devices using single crystals (Reyes-Martinez et al., 2012[Reyes-Martinez, M. A., Ramasubramaniam, A., Briseno, A. L. & Crosby, A. J. (2012). Adv. Mater. 24, 5548-5552.]). A relationship between the mechanical properties and the crystal structure of rubrene was derived by determining the in-plane elastic constants in the [001] and [010] directions. Interestingly, a peak value for the buckling wavelength was experimentally observed at approximately 30° with respect to the [010] direction which corresponds to the angle between the tetracene backbone stacking and the b axis in the crystal packing. The monoclinic and triclinic polymorphs of rubrene show poor semiconducting properties due to the absence of π-stacking interactions in the monoclinic polymorph and significant slippage of tetracene backbones in the crystal packing of the triclinic polymorph. Recent calculations of the transfer integral (t) and the band structure have been used to study the semiconducting properties of rubrene (McGarry et al., 2013[McGarry, K. A., Xie, W., Sutton, C., Risko, C., Wu, Y. F., Young, V. G., Brédas, J. L., Frisbie, C. D. & Douglas, C. J. (2013). Chem. Mater. 25, 2254-2263.]). In rubrene, the largest t values of 100 meV and 53 meV were obtained for holes and electrons, respectively, along the π-stacking direction corresponding to the b axis. Further, full periodic electronic band structure calculations in the crystal geometry suggest that the top of the valence band and bottom of the conduction band are found at the Γ-point, indicating a direct band gap for rubrene. In the band structure calculations, the Γ–Y direction in the Brillouin zone corresponds to the ππ coupling in the b direction of the unit cell and the herringbone packing motif in the c direction of the unit cell was represented by the Z point in the Brillouin zone (McGarry et al., 2013[McGarry, K. A., Xie, W., Sutton, C., Risko, C., Wu, Y. F., Young, V. G., Brédas, J. L., Frisbie, C. D. & Douglas, C. J. (2013). Chem. Mater. 25, 2254-2263.]). It was shown that the largest t values and ππ coupling along the b axis is due to the presence of ππ intermolecular interactions in the rubrene molecules.

[Figure 1]
Figure 1
(a) ORTEP representation of the structure of rubrene at 100 K. Atom ellipsoids are shown at 50% probability level. The symmetry operations 2, m and i are superimposed on the molecule. (b) Molecular packing diagram with ππ stacking along the b axis and interplanar distance between layers along the a-axis at 100 K. (c) Herringbone packing of molecules depicting C4⋯H5 and C9⋯H10 interactions (blue dotted lines), viewed along the a axis.

To gain further insight into intermolecular interactions which control the transport properties, we have studied the electron density (ED) distribution in orthorhombic rubrene using high-resolution low-temperature single-crystal X-ray diffraction data. To obtain unbiased positions and thermal parameters for the H atoms we have also collected single-crystal neutron diffraction data. The X–N procedure to determine experimental EDs has been shown to give very accurate results (Coppens, 1967[Coppens, P. (1967). Science, 158, 1577-1579.]; Figgis et al., 1993[Figgis, B. N., Iversen, B. B., Larsen, F. K. & Reynolds, P. A. (1993). Acta Cryst. B49, 794-806.]; Iversen et al., 1997[Iversen, B. B., Larsen, F. K., Figgis, B. N. & Reynolds, P. A. (1997). Dalton Trans. 13, 2227-2240.]; Overgaard et al., 2001[Overgaard, J., Schiøtt, B., Larsen, F. K. & Iversen, B. B. (2001). Chem. Eur. J. pp. 3756-3767.]). In this work, we try to rationalize the semiconducting properties of rubrene based on a topological analysis of the ED and subsequent quantitative analysis of the chemical bonds in the structure, as well as using experimentally derived energies of selected intermolecular interactions and the total lattice energy. The results are supported by extensive theoretical calculations.

2. Experimental

2.1. Materials and crystal growth

Fine powders of rubrene (≥ 98%) and p-xylene solvent (≥ 98%) were procured from Sigma–Aldrich and used without further purification. 0.2 g of rubrene was added to 20 ml of p-xylene under continuous stirring in an Ar atmosphere in darkness. The solution was heated to 333 K and kept at this temperature for 10 h. Later the solution was cooled to the saturation point of 318 K at the rate of 1 K h−1. Subsequently it was cooled to room temperature at 0.5 K h−1. This procedure produced good quality single crystals of various sizes. The temperature profile of crystal growth and optical micrograph of the obtained crystals are given in the supporting information (Figs. S1 and S2).

2.2. X-ray data collection

Single-crystal X-ray diffraction datasets were collected on a conventional X-ray diffractometer at Aarhus University as well as at the BL02B1 beamline at the SPring8 synchrotron in Japan. For the conventional data, a high-quality single crystal with dimensions 0.24 × 0.22 × 0.18 mm was selected under a polarizing microscope and mounted using Paratone-N oil on an Agilent Technologies SuperNova diffractometer fitted with a microfocus Mo Kα X-ray tube. The crystal was cooled to 100 K at a rate of 60 K h−1 using an Oxford Cryosystems Cryostream 700. High-resolution X-ray data up to (sin θ/λ)max = 1.1 Å−1 with high redundancy (∼ 10) and completeness (∼ 100%) were obtained. The complete details of data collection and reduction procedures were published elsewhere (Jørgensen et al., 2014[Jørgensen, M. R. V., Hathwar, V. R., Sist, M., Wang, X., Hoffmann, C. M., Briseno, A. L., Overgaard, J. & Iversen, B. B. (2014). Acta Cryst. A70, 679-681.]). Synchrotron X-ray data was collected to a resolution of (sin θ/λ)max = 1.51 Å−1 at 20 K on a single crystal of maximum dimension 0.10 × 0.09 × 0.08 mm using a wavelength of 0.35312 Å. The BL02B1 beamline is equipped with a Rigaku kappa diffractometer and a cylindrical image-plate detector. Integration of all Bragg reflections and Lorentz–polarization corrections were carried out with the software RAPID-AUTO (Rigaku, 2004[Rigaku RAPID-AUTO Rigaku Corporation, T. & Japan (2004).]). Sorting, scaling, merging and empirical absorption correction were carried out using the SORTAV program (Blessing, 1995[Blessing, R. H. (1995). Acta Cryst. A51, 33-38.]). The crystal structure was solved by direct methods in SHELXS (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]) and refined using SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]) in the WinGX package (Farrugia, 2012[Farrugia, L. J. (2012). J. Appl. Cryst. 45, 849-854.]). All H atoms were located from the difference-Fourier analysis. Full crystallographic details are listed in the supporting information (Table S1).

2.3. Neutron data collection

Single-crystal neutron diffraction data on rubrene were collected at 100 K using a block-shaped crystal with dimensions 1.5 × 1.5 × 1.0 mm on the single-crystal time-of-flight Laue diffractometer, TOPAZ, located at the Spallation Neutron Source at Oak Ridge National Laboratory. The integration of collected data was carried out using the program Mantid (Taylor et al., 2012[Taylor, J., Arnold, O., Biheaux, J., Buts, A., Campbel, S., Doucet, M., Draper, N., Fowler, R., Gigg, M., Lynch, V., Markvardsen, A., Palmen, K., Parker, P., Peterson, P., Ren, S., Reuter, M., Savici, A., Taylor, R., Tolchenov, R., Whitley, R., Zhou, W. & Zikovsky, J. (2012). Bull. Am. Phys. Soc. pp. 57.]; Schultz et al., 2014[Schultz, A. J., Jørgensen, M. R. V., Wang, X., Mikkelson, R. L., Mikkelson, D. J., Lynch, V. E., Peterson, P. F., Green, M. L. & Hoffmann, C. M. (2014). J. Appl. Cryst. 47, 915-921.]). The incident beam spectrum and detector efficiency corrections were performed in the program ANVRED (Schultz et al., 1984[Schultz, A. J., Srinivasan, K., Teller, R. G., Williams, J. M. & Lukehart, C. M. (1984). J. Am. Chem. Soc. 106, 999-1003.]). The crystal structure was refined using the GSAS program (Larson & Von Dreele, 1994[Larson, A. C. & Von Dreele, R. B. (1994). Los Alamos National Laboratory Report LAUR 86-748..]; Toby, 2001[Toby, B. H. (2001). J. Appl. Cryst. 34, 210-213.]). Detailed description of the data collection and reduction procedures have been reported elsewhere (Jørgensen et al., 2014[Jørgensen, M. R. V., Hathwar, V. R., Sist, M., Wang, X., Hoffmann, C. M., Briseno, A. L., Overgaard, J. & Iversen, B. B. (2014). Acta Cryst. A70, 679-681.]).

2.4. Computational details

Gas-phase quantum-mechanical simulations were performed at the experimental geometry using the B3LYP (Becke, 1993[Becke, A. D. (1993). J. Chem. Phys. 98, 5648-5652.]) functional with 6-311G(d,p) basis set using the GAUSSIAN09 package (Frisch et al., 2009[Frisch, M. J., Trucks, G. W., Schlegel, H. B., Scuseria, G. E., Robb, M. A., Cheeseman, J. R., Scalmani, G., Barone, V., Mennucci, B., Petersson, G. A., Nakatsuji, H., Caricato, M., Li, X., Hratchian, H. P., Izmaylov, A. F., Bloino, J., Zheng, G., Sonnenberg, J. L., Hada, M., Ehara, M., Toyota, K., Fukuda, R., Hasegawa, J., Ishida, M., Nakajima, T., Honda, Y., Kitao, O., Nakai, H., Vreven, T., Montgomery, J. J. A., Peralta, J. E., Ogliaro, F., Bearpark, M., Heyd, J. J., Brothers, E., Kudin, K. N., Staroverov, V. N., Kobayashi, R., Normand, J., Raghavachari, K., Rendell, A., Burant, J. C., Iyengar, S. S., Tomasi, J., Cossi, M., Rega, N., Millam, J. M., Klene, M., Knox, J. E., Cross, J. B., Bakken, V., Adamo, C., Jaramillo, J., Gomperts, R., Stratmann, R. E., Yazyev, O., Austin, A. J., Cammi, R., Pomelli, C., Ochterski, J. W., Martin, R. L., Morokuma, K., Zakrzewski, V. G., Voth, G. A., Salvador, P., Dannenberg, J. J., Dapprich, S., Daniels, A. D., Farkas, O., Foresman, J. B., Ortiz, J. V., Cioslowski, J. & Fox, D. J. (2009). Gaussian 09, revision A. 02; Gaussian, Inc., Wallingford, CT.]). The topological analysis of the ED, ρ(r), was performed with a modified version of the program package PROAIM (Bieglerkonig et al., 1982[Biegler-könig, F. W., Bader, R. F. W. & Tang, T. H. (1982). J. Comput. Chem. 3, 317-328.]). Basis-set superposition error (BSSE) corrected interaction energies of molecular dimers at the crystal geometry were also evaluated. Periodic quantum-mechanical simulations at the experimental geometry were performed with the Linear Combination of Gaussian-Type Functions (LCGTF) approach as implemented in CRYSTAL14 (Dovesi et al., 2014[Dovesi, R., Orlando, R., Erba, A., Zicovich-Wilson, C. M., Civalleri, B., Casassa, S., Maschio, L., Ferrabone, M., De La Pierre, M., D'Arco, P., Noël, Y., Causà, M., Rérat, M. & Kirtman, B. (2014). Int. J. Quantum Chem. 114, 1287-1317.]) at the B3LYP/6-31G(d,p) level of theory. The reciprocal space was sampled with a 4 × 4 × 4 grid in the irreducible Brillouin zone. A 30% mixing of the Fock matrices was applied to accelerate convergence, while the tolerances determining the level of accuracy of the Coulomb and exchange series were set to 10−7 (ITOL1 to ITOL4) and 10−14 (ITOL5). Theoretical structure factors with the same indices as observed in the respective experiment were computed separately and employed to derive a theoretical multipole-projected ED distribution in XD2006 (Volkov et al., 2006[Volkov, A., Macchi, P., Farrugia, L. J., Gatti, C., Mallinson, P., Richter, T. & Koritsanszky, T. (2006). XD2006 - A Computer Program Package for Multipole Refinement, Topological Analysis of Charge Densities and Evaluation of Intermolecular Energies from Experimental and Theoretical Structure Factors.,.]). Furthermore, the topological analysis and the evaluation of the integral properties were computed directly on the LCGTF ED using the TOPOND (Gatti et al., 1994[Gatti, C., Saunders, V. R. & Roetti, C. (1994). J. Chem. Phys. 101, 10686-10696.]) package interfaced with the CRYSTAL14 code. The experimentally obtained geometry was used as input for the calculation of the lattice energy and intermolecular interaction energy using the PIXELC module of the CLP computer program package (version June 2013; Gavezzotti, 2011[Gavezzotti, A. (2011). New J. Chem. 35, 1360-1368.]). For this purpose, an accurate ED of the molecule was obtained independently by the MP2 and B3LYP calculations with a 6-31G(d,p) basis set in the GAUSSIAN09 package (Frisch et al., 2009[Frisch, M. J., Trucks, G. W., Schlegel, H. B., Scuseria, G. E., Robb, M. A., Cheeseman, J. R., Scalmani, G., Barone, V., Mennucci, B., Petersson, G. A., Nakatsuji, H., Caricato, M., Li, X., Hratchian, H. P., Izmaylov, A. F., Bloino, J., Zheng, G., Sonnenberg, J. L., Hada, M., Ehara, M., Toyota, K., Fukuda, R., Hasegawa, J., Ishida, M., Nakajima, T., Honda, Y., Kitao, O., Nakai, H., Vreven, T., Montgomery, J. J. A., Peralta, J. E., Ogliaro, F., Bearpark, M., Heyd, J. J., Brothers, E., Kudin, K. N., Staroverov, V. N., Kobayashi, R., Normand, J., Raghavachari, K., Rendell, A., Burant, J. C., Iyengar, S. S., Tomasi, J., Cossi, M., Rega, N., Millam, J. M., Klene, M., Knox, J. E., Cross, J. B., Bakken, V., Adamo, C., Jaramillo, J., Gomperts, R., Stratmann, R. E., Yazyev, O., Austin, A. J., Cammi, R., Pomelli, C., Ochterski, J. W., Martin, R. L., Morokuma, K., Zakrzewski, V. G., Voth, G. A., Salvador, P., Dannenberg, J. J., Dapprich, S., Daniels, A. D., Farkas, O., Foresman, J. B., Ortiz, J. V., Cioslowski, J. & Fox, D. J. (2009). Gaussian 09, revision A. 02; Gaussian, Inc., Wallingford, CT.]). The interaction energies of the selected molecular pairs were extracted from the analysis of crystal packing along with involved intermolecular interactions using the.mlc file generated by the PIXEL calculations. The contribution of Coulombic, polarization, dispersion and repulsion components were obtained for both the lattice energy and total intermolecular interaction energies.

2.5. Electron density models

Aspherical ED features were modelled using the Hansen–Coppens multipole formalism (Hansen & Coppens, 1978[Hansen, N. K. & Coppens, P. (1978). Acta Cryst. A34, 909-921.]) implemented in XD2006 (Volkov et al., 2006[Volkov, A., Macchi, P., Farrugia, L. J., Gatti, C., Mallinson, P., Richter, T. & Koritsanszky, T. (2006). XD2006 - A Computer Program Package for Multipole Refinement, Topological Analysis of Charge Densities and Evaluation of Intermolecular Energies from Experimental and Theoretical Structure Factors.,.]). The core and valence scattering factors in the model were based on the wavefunctions derived by Su, Coppens and Macchi (Su & Coppens, 1998[Su, Z. & Coppens, P. (1998). Acta Cryst. A54, 646-652.]; Macchi & Coppens, 2001[Macchi, P. & Coppens, P. (2001). Acta Cryst. A57, 656-662.]). The C—H bond distances were constrained to the values obtained from the structural model refined against the neutron data (see above). For the 100 K model the anisotropic displacement parameters (ADPs) for the H atoms were obtained from the neutron experiment. The used ADPs of H atoms were scaled based on a least-squares fit between the ADPs of the C atoms from the X-ray ED model and the neutron model, respectively, using the program UIJXN (Blessing, 1995[Blessing, R. H. (1995). Acta Cryst. A51, 33-38.]). In the absence of neutron data measured at 20 K, the ADPs for hydrogen at this temperature were estimated using the SHADE2 webserver (Madsen, 2006[Madsen, A. Ø. (2006). J. Appl. Cryst. 39, 757-758.]), where the C—H bond distances were constrained to the values used in the 100 K ED model. In order to compare the ED results from the two temperatures, the same multipole modelling procedure was followed for both datasets and a detailed description of multipole modelling can be found elsewhere (Jørgensen et al., 2014[Jørgensen, M. R. V., Hathwar, V. R., Sist, M., Wang, X., Hoffmann, C. M., Briseno, A. L., Overgaard, J. & Iversen, B. B. (2014). Acta Cryst. A70, 679-681.]). The topological analysis of the ED was carried out in the framework of Bader's Quantum Theory of Atoms in Molecules (QTAIM) (Bader, 1990[Bader, R. F. W. (1990). Atoms in molecules - a quantum theory. Clarendon: Oxford.]). The NCI analysis in rubrene was carried out on the experimentally obtained ED using the NCImilano program (Saleh et al., 2013[Saleh, G., Lo Presti, L., Gatti, C. & Ceresoli, D. (2013). J. Appl. Cryst. 46, 1513-1517.]). The multipole models for both datasets were examined by the Hirshfeld rigid bond test (Hirshfeld, 1976[Hirshfeld, F. L. (1976). Acta Cryst. A32, 239-244.]) to confirm successful deconvolution of thermal and electronic effects. The largest differences of mean-square displacement amplitudes (DMSDA) of all covalent bonds involving non-hydrogen atoms were found to be 3 × 10−4 Å2 for the C3—C4 bond in both 100 K and 20 K ED models. The minimum and maximum residual ED peaks in the multipole model [calculated for I > 3σ(I)] were −0.18 and 0.18 e Å−3 at 100 K and −0.19 and 0.23 e Å−3 at 20 K. In addition, normal probability plots, variation of scale factor with resolution, and the fractal dimension plots of the residual densities were used to confirm the high quality of the ED models (see the supporting information and our previous publication; Jørgensen et al., 2014[Jørgensen, M. R. V., Hathwar, V. R., Sist, M., Wang, X., Hoffmann, C. M., Briseno, A. L., Overgaard, J. & Iversen, B. B. (2014). Acta Cryst. A70, 679-681.]; for more details). The ADPs obtained for non-H atoms from the neutron-diffraction data and multipole model against high-resolution X-ray data at 100 K were compared to gauge the quality of the obtained datasets. The ADPs refined against the two 100 K datasets were found to be in excellent agreement with minimum deviations in mean ADPs and among the smallest mean average differences, 〈|ΔU|〉, ever reported for an organic compound at liquid N2 temperatures (Morgenroth et al., 2008[Morgenroth, W., Overgaard, J., Clausen, H. F., Svendsen, H., Jørgensen, M. R. V., Larsen, F. K. & Iversen, B. B. (2008). J. Appl. Cryst. 41, 846-853.]). To validate the experimental ED results, theoretical calculations were performed on the geometry obtained from the multipole models. The topological parameters obtained for all covalent bonds from the experiment are in good agreement with theoretical values (Table S2 in the supporting information). It is noteworthy that the agreement between theory (multipole projected) and experiment for the bond topology consistently is better for the 20 K data than for the 100 K data. Thus, for the C—C bonds the average difference of the electron density at the bond critical point is 〈ΔρC—C〉 = 0.053 e Å−3 at 20 K and 0.099 e Å−3 at 100 K. For the C—H bonds the values are 〈ΔρC—H〉 = 0.035 e Å−3 at 20 K and 0.060 e Å−3 at 100 K. This also indicates that the improved accuracy of the thermal deconvolution at 20 K is more important than the lack of unbiased neutron ADPs for the H atoms at 20 K. In general, the most accurate experimental EDs for organic crystals can be obtained at the lowest possible temperature using the X–N procedure.

3. Results and discussion

3.1. Crystal structure

The crystal structure and molecular packing in the crystalline state is well documented for rubrene in the literature (Jurchescu et al., 2006[Jurchescu, O. D., Meetsma, A. & Palstra, T. T. M. (2006). Acta Cryst. B62, 330-334.]). The asymmetric unit in the orthorhombic polymorph of rubrene is constituted by just one quarter of the whole molecule, which obeys 2/m symmetry (Fig. 1[link]a). A twofold axis is located along the C1—C1b bond and the inversion center coincides with the middle of the C1—C1b bond such that a mirror plane is perpendicular to the tetracene backbone of the molecule. The maximum deviation from planarity of the tetracene backbone is found to be 0.0423 (1) Å for C2 at 100 K and 0.0274 (1) Å for C4 at 20 K. The packing of the rubrene molecules generate a herringbone motif in the crystal lattice. At 100 K, the π-stacking (Cπ⋯Cπ interaction) distance between two adjacent parallel molecules is 3.706 (1) Å and the interlayer distance perpendicular to the π-stacks is 13.875 (1) Å (see Fig. 1[link]b). There are no significant changes in these distances at 20 K [3.694 (1) and 13.868 (2) Å]. The π-stacking in orthorhombic rubrene is characterized by the absence of slippage along the b axis (parallel displacement), which is otherwise commonly found in the packing motifs of crystalline tetracene, pentacene and other polymorphs of rubrene (da Silva et al., 2005[Silva Filho, D. A. da, Kim, E. G. & Brédas, J.-L. (2005). Adv. Mater. 17, 1072-1076.]; Bergantin & Moret, 2012[Bergantin, S. & Moret, M. (2012). Cryst. Growth Des. 12, 6035-6041.]; Delgado et al., 2009[Delgado, M. C. R., Pigg, K. R., da Silva Filho, D. A., Gruhn, N. E., Sakamoto, Y., Suzuki, T., Osuna, R. M., Casado, J., Hernández, V., Navarrete, J. T. L., Martinelli, N. G., Cornil, J., Sánchez-Carrera, R. S., Coropceanu, V. & Brédas, J. L. (2009). J. Am. Chem. Soc. 131, 1502-1512.]). In a recent Hirshfeld surface (HS) analysis study of rubrene (Bergantin & Moret, 2012[Bergantin, S. & Moret, M. (2012). Cryst. Growth Des. 12, 6035-6041.]), these features have been clearly highlighted and described as one of the key factors for the observed semiconducting properties. Due to the herringbone packing of molecules, C5—H5⋯C4 interactions arise between tetracene backbones and C10—H10⋯C9 interactions between the phenyl rings in the crystal structure (see Fig. 1[link]c). In addition, several H⋯H interactions are observed in the crystal structure, which play a significant role in the packing of molecules (listed in Table 1[link]). One of the significant H—H bonds is the homopolar short C8—H8⋯H8−C8 interaction with H⋯H distance of 2.2639 (1) Å. The direction of the H8—H8 bond is perpendicular to that of the Cπ⋯Cπ stacking interactions and it is a major structure stabilizing interaction in the perpendicular direction of tetracene backbone.

Table 1
Topological parameters of intermolecular interactions in rubrene

The values reported in the first, second and third lines correspond to the experimental multipole model, theoretical multipole model and the theoretical LCGTF from TOPOND, respectively; G, V and H are kinetic, potential and total energy densities at b.c.p., respectively. Errors on the experimental ∇2ρb are not available, but combined random (least squares) and systematic (model) errors are at least on the second digit after the decimal point.

Temperature Interaction Rij (Å) ρb (e Å−3) 2ρb (e Å−5) G (kJ mol−1 bohr−3) V (kJ mol−1 bohr−3) H (kJ mol−1 bohr−3) |V|/G
100 K C3π⋯C4πi 3.7304 0.031 (1) 0.22 5.0 −4.0 1.0 0.81
    0.022 0.22 4.6 −3.1 1.4 0.67
    0.024 0.24 5.2 −4.0 1.2 0.77
C4⋯H5ii 2.8252 0.037 (2) 0.27 6.3 −5.2 1.1 0.83
    0.033 0.31 6.8 −5.1 1.7 0.75
    0.040 0.44 9.7 −7.2 2.4 0.74
C9⋯H10iii 2.8673 0.032 (3) 0.21 4.9 −4.0 0.9 0.83
    0.036 0.25 5.9 −4.9 1.0 0.83
    0.038 0.38 8.2 −6.2 2.0 0.76
H8⋯H8iv 2.2688 0.046 (2) 0.57 12.3 −9.1 3.2 0.74
    0.032 0.69 13.5 −8.4 5.2 0.62
    0.054 0.76 15.5 −10.3 5.3 0.66
H8⋯H8i 2.4026 0.024 (2) 0.31 6.3 −4.1 2.2 0.66
    0.023 0.28 5.8 −3.8 1.9 0.66
    0.034 0.43 8.8 −5.9 2.9 0.67
H7⋯H7i 2.5174 0.028 (4) 0.49 9.7 −6.1 3.5 0.63
    0.031 0.47 9.6 −6.3 3.3 0.66
    0.035 0.46 9.1 −5.8 3.3 0.64
H4⋯H7i 2.4068 0.034 (3) 0.23 5.4 −4.5 0.9 0.83
    0.021 0.31 6.2 −3.9 2.3 0.63
    0.033 0.41 8.3 −5.5 2.8 0.66
H9⋯H9v 2.6703 0.020 (1) 0.21 4.4 −2.9 1.5 0.67
    0.018 0.22 4.3 −2.8 1.5 0.65
    0.022 0.28 5.6 −3.6 2.0 0.64
H5⋯H11vi 2.1631 0.048 (4) 0.33 8.1 −7.2 0.9 0.89
    0.042 0.34 7.8 −6.4 1.3 0.82
    0.048 0.59 12.8 −9.6 3.3 0.75
H4⋯H11vii 2.6045 0.034 (3) 0.39 8.2 −5.9 2.3 0.72
    0.035 0.44 9.3 −6.5 2.8 0.70
    0.041 0.46 9.9 −7.2 2.7 0.73
H8⋯H9viii 2.7562 0.015 (1) 0.17 3.4 −2.1 1.3 0.64
    0.011 0.16 3.1 −1.8 1.3 0.58
    0.017 0.19 3.9 −2.6 1.3 0.67
20 K C3π⋯C4πi 3.7334 0.025 (1) 0.23 5.4 −3.8 1.6 0.70
    0.023 0.22 4.7 −3.3 1.4 0.70
    0.025 0.24 5.4 −4.1 1.3 0.76
C4⋯H5ii 2.8192 0.039 (2) 0.33 7.4 −6.0 1.4 0.81
    0.033 0.32 6.9 −5.1 1.7 0.74
    0.042 0.47 10.1 −7.4 2.7 0.73
C9⋯H10iii 2.8577 0.041 (2) 0.27 6.5 −5.7 0.8 0.88
    0.036 0.26 6.1 −5.0 1.1 0.82
    0.038 0.38 8.4 −6.4 2.0 0.76
H8⋯H8iv 2.2639 0.074 (2) 0.79 18.6 −15.8 2.8 0.85
    0.035 0.66 13.3 −8.5 4.8 0.64
    0.055 0.78 15.9 −10.5 5.4 0.66
H8⋯H8i 2.3743 0.034 (2) 0.43 9.1 −6.3 2.7 0.69
    0.025 0.31 6.3 −4.2 2.1 0.67
    0.035 0.45 9.2 −6.2 3.0 0.67
H7⋯H7i 2.4816 0.040 (3) 0.56 11.7 −8.2 3.5 0.70
    0.021 0.38 7.4 −4.5 2.9 0.61
    0.037 0.49 9.8 −6.2 3.5 0.63
H4⋯H7i 2.4082 0.043 (2) 0.37 8.6 −6.9 1.6 0.80
    0.030 0.32 6.8 −4.8 2.0 0.71
    0.034 0.42 8.6 −5.8 2.9 0.67
H9⋯H9v 2.6288 0.021 (1) 0.28 5.5 −3.6 2.0 0.65
    0.021 0.45 8.6 −5.1 1.7 0.59
    0.024 0.30 6.1 −3.9 2.2 0.64
H5⋯H11vi 2.1565 0.040 (5) 0.49 10.4 −7.5 2.9 0.72
    0.043 0.35 8.1 −6.7 1.4 0.83
    0.048 0.60 13.1 −9.8 3.3 0.75
H4⋯H11vii 2.6102 0.044 (1) 0.52 11.3 −8.4 2.9 0.74
    0.041 0.46 10.0 −7.4 2.6 0.74
    0.041 0.47 10.1 −7.4 2.8 0.73
H8⋯H9viii 2.7996 0.011 (1) 0.16 3.1 −1.8 1.3 0.58
    0.014 0.17 3.4 −2.1 1.3 0.62
    0.017 0.19 4.0 −2.7 1.3 0.68
Symmetry codes: (i) x, -1-y, -z; (ii) [x, {1\over 2}+y, {1\over 2}-z]; (iii) [x, -{1\over 2}+y, {1\over 2}-z]; (iv) [{1\over 2}-x, -{1\over 2}-y,-z]; (v) [{1\over 2}-x, y, {1\over 2}-z]; (vi) x, 1-y, z; (vii) [x, {1\over 2}+y, {1\over 2}-z]; (viii) [{1\over 2}-x, -{1\over 2}-y, -z].

3.2. Topological analysis

The values of the ED, Laplacian and derived properties at the bond critical points (b.c.p.s) for Cπ⋯Cπ, C—H⋯C and H⋯H interactions are listed in Table 1[link]. The small values of ρbcp and positive ∇2ρbcp indicate the closed-shell nature of these interactions in the crystal structure and these values are similar to literature values (Wolstenholme et al., 2007[Wolstenholme, D. J., Matta, C. F. & Cameron, T. S. (2007). J. Phys. Chem. A, 111, 8803-8813.]; Wolstenholme & Cameron, 2006[Wolstenholme, D. J. & Cameron, T. S. (2006). J. Phys. Chem. A, 110, 8970-8978.]; Zhurova et al., 2006[Zhurova, E. A., Matta, C. F., Wu, N., Zhurov, V. V. & Pinkerton, A. A. (2006). J. Am. Chem. Soc. 128, 8849-8861.]; Nguyen et al., 2012[Nguyen, T. H., Groundwater, P. W., Platts, J. A. & Hibbs, D. E. (2012). J. Phys. Chem. A, 116, 3420-3427.]; Shishkina et al., 2013[Shishkina, A. V., Zhurov, V. V., Stash, A. I., Vener, M. V., Pinkerton, A. A. & Tsirelson, V. G. (2013). Cryst. Growth Des. 13, 816-828.]). The estimated potential (V) and kinetic (G) energy densities at the b.c.p.s provide additional information to classify the interactions as shared or closed shell interactions. The |V|/G ratio is smaller than 1 for closed shell interactions and larger than 2 for shared shell interactions (Espinosa et al., 2002[Espinosa, E., Alkorta, I., Elguero, J. & Molins, E. (2002). J. Chem. Phys. 117, 5529-5542.]). In the case of rubrene, the |V|/G ratios are smaller than 1 for all intermolecular interactions thus, suggesting that all are closed shell interactions (Table 1[link]). The Cπ⋯Cπ and C⋯H interactions have comparable values of ρbcp and ∇2ρbcp at the b.c.p.s. The stabilizing contribution of H⋯H interactions to the energy of the crystal has been well established by the QTAIM analysis in several organic crystals (Matta et al., 2003[Matta, C. F., Hernández-Trujillo, J., Tang, T. H. & Bader, R. F. W. (2003). Chem. Eur. J. 9, 1940-1951.]; Echeverría et al., 2011[Echeverría, J., Aullón, G., Danovich, D., Shaik, S. & Alvarez, S. (2011). Nat. Chem. 3, 323-330.]; Grabowski et al., 2007[Grabowski, S. J., Sokalski, W. A. & Leszczynski, J. (2007). Chem. Phys. 337, 68-76.]; Paul et al., 2011[Paul, A., Kubicki, M., Jelsch, C., Durand, P. & Lecomte, C. (2011). Acta Cryst. B67, 365-378.]). All possible H⋯H interactions which shows a b.c.p. (even when the H⋯H interaction distance is larger than the sum of the van der Waals radii equal to 2.4 Å) were considered for the topological analysis in the rubrene ED model. For H⋯H interactions, the values of ρbcp and ∇2ρbcp are found in the range 0.011−0.054 e Å−3 and 0.156–0.764 e Å−5, respectively, in the ED model at 100 K. For the 20 K ED model, they are in the range 0.011–0.074 e Å−3 and 0.162–0.785 e Å−5 indicating only minor differences between the two models. The obtained topological values are overall in agreement with the literature results obtained from the other experimental ED studies (Wolstenholme & Cameron, 2006[Wolstenholme, D. J. & Cameron, T. S. (2006). J. Phys. Chem. A, 110, 8970-8978.]; Wolstenholme et al., 2007[Wolstenholme, D. J., Matta, C. F. & Cameron, T. S. (2007). J. Phys. Chem. A, 111, 8803-8813.]; Zhurova et al., 2006[Zhurova, E. A., Matta, C. F., Wu, N., Zhurov, V. V. & Pinkerton, A. A. (2006). J. Am. Chem. Soc. 128, 8849-8861.]; Paul et al., 2011[Paul, A., Kubicki, M., Jelsch, C., Durand, P. & Lecomte, C. (2011). Acta Cryst. B67, 365-378.]). Of all the H—H bonds, the H8—H8 bond (perpendicular to the π-stacking interactions) has the shortest bond path, 2.2688 (1) Å, and it is considerably smaller than the sum of the van der Waals radii of hydrogen. This observation is supported by the larger values of ρbcp and ∇2ρbcp for the H8—H8 in comparison with the rest of the H—H interactions listed in Table 1[link]. The bond path with b.c.p.s (Fig. 2[link]) and density gradient trajectory plots (Fig. 3[link]) further illustrate these interactions in the crystal packing. It has already been shown that H—H bonding supplement the van der Waals interactions in the crystal by the detailed evaluation of the ED, Laplacian and energy densities at CPs as a function of the bond distance (Paul et al., 2011[Paul, A., Kubicki, M., Jelsch, C., Durand, P. & Lecomte, C. (2011). Acta Cryst. B67, 365-378.]). They demonstrated that H—H bonding follows the exponential relations between the kinetic and potential energy densities (G and V) with the bond distance and the linear dependence of the total energy density (H) on the positive Hessian curvature, which is similar to the nature of the van der Waals interactions. In this study, the intermolecular bond paths for the Cπ⋯Cπ and H—H bonding are longer than the direct inter-nuclear distances as they are curved (see Fig. 3[link]). Curved bond paths are common in interactions involving π-electron density (Lu et al., 2007[Lu, Y. X., Zou, J. W., Wang, Y. H. & Yu, Q. S. (2007). Chem. Phys. 334, 1-7.]; Macchi et al., 1998[Macchi, P., Proserpio, D. M. & Sironi, A. (1998). J. Am. Chem. Soc. 120, 1447-1455.]; Scherer et al., 2006[Scherer, W., Eickerling, G., Shorokhov, D., Gullo, E., McGrady, G. S. & Sirsch, P. (2006). New J. Chem. 30, 309-312.]) and weak closed shell interactions like H—H bonding (Wolstenholme et al., 2007[Wolstenholme, D. J., Matta, C. F. & Cameron, T. S. (2007). J. Phys. Chem. A, 111, 8803-8813.]). Integrated net atomic charges are calculated from the QTAIM analysis and they are listed in Table S3. A small positive (δ+) charge on all hydrogen atoms indicates that all H—H bonds correspond to homopolar Hδ+⋯Hδ+ interactions. Additionally, both the 100 K and the 20 K ED models yield similar values for the derived topological properties at the b.c.p. for all covalent bonds and intermolecular interactions based on the QTAIM analysis. The topological analysis of the ED could establish the presence of Cπ⋯Cπ stacking interactions between the adjacent rubrene molecules in the crystalline state, but there is no direct relationship available to connect the topological features with the semiconducting properties like mobility in rubrene.

[Figure 2]
Figure 2
Molecular graphs from the experimental ED at 100 K showing (a) Cπ⋯Cπ stacking interaction between the tetracene backbones and (b) H8—H8 bond. Red and yellow dots indicate b.c.p.s and ring critical points, respectively. The solid brown line separates adjacent atomic basins. Symmetry operations are listed in Table 1[link].
[Figure 3]
Figure 3
Density gradient trajectory plots demonstrating (a) C8—H8⋯H8—C8 and C7—H7⋯H7—C7 interactions along the tetracene backbone stacking. (b) C8—H8⋯H8—C8 interaction perpendicular to the tetracene backbone stacking. Heavy and dashed black lines indicate intra- and intermolecular bond paths, respectively. Adjacent atomic basins are separated by the solid brown line. The cage critical points (3, −3), b.c.p.s (3, −1) and ring critical points (3, +1) are shown as black, blue and green colored dots, respectively. Symmetry operations are listed in Table 1[link].

3.3. Lattice energy and interaction energies

Calculation of lattice energy and interaction energies of molecular dimers using the PIXEL (Gavezzotti, 2011[Gavezzotti, A. (2011). New J. Chem. 35, 1360-1368.]) method enables partitioning of the total energy into electrostatic, polarization, dispersion and repulsion components. The values obtained from the PIXEL calculations are known to be comparable to high level MP2 and DFT-D quantum mechanical calculations (Gavezzotti, 2008[Gavezzotti, A. (2008). Mol. Phys. 106, 1473-1485.]; Dunitz & Gavezzotti, 2012[Dunitz, J. D. & Gavezzotti, A. (2012). Cryst. Growth Des. 12, 5873-5877.]; Maschio et al., 2011[Maschio, L., Civalleri, B., Ugliengo, P. & Gavezzotti, A. (2011). J. Phys. Chem. A, 115, 11179-11186.]; Braun et al., 2013[Braun, D. E., Bhardwaj, R. M., Arlin, J. B., Florence, A. J., Kahlenberg, V., Griesser, U. J., Tocher, D. A. & Price, S. L. (2013). Cryst. Growth Des. 13, 4071-4083.]). The different energy contributions reveal that a significant amount of the total lattice energy comes from the dispersion interactions (Edisp ≃ 5.6Ees ≃ 9.1Epol, Table 2[link]). To evaluate the importance of non-covalent interactions in the crystal packing, interaction energies between selected molecular dimers were estimated using the experimental ED model geometry (Table 2[link]). The primary interacting dimers in the crystal structure are formed through the following interactions: Cπ⋯Cπ stacking (dimer I), C—H⋯C (dimer II), and H—H interactions (dimers III and IV). Not surprisingly, the dispersion interaction energy is the largest contributor to the total interaction energy of all molecular dimers. The interaction energy of the molecular pair connected by Cπ⋯Cπ interaction (dimer I) along the crystallographic b axis is much larger compared with the interaction energy of the molecular pair connected by the H—H bonding (dimer III) along the crystallographic a axis. The interaction energy of the molecular dimer with C—H⋯C interaction (dimer II) in the herringbone packing motif constitute a significant amount of interaction energy (∼ −48.5 kJ mol−1) in the crystal packing (Tables 2[link] and 3[link]). It is important to notice that these C—H⋯C interactions do not cause any slippage of the ππ stacking along the b axis. Besides these interactions, a significant contribution to the interaction energy (∼ −6.6 kJ mol−1) is provided by molecular pairs with the H9⋯H9 bonding (dimer IV) in the crystal packing. The rest of the H—H interactions listed in Table 1[link] do not contribute significantly to the interaction energies in the crystal structure (∼ 0–0.5 kJ mol−1). There are no significant changes found in the PIXEL interaction energies using the crystal geometry obtained by the ED models at 100 K and 20 K. To estimate the influence of computational methods on the interaction energy, the ED for the PIXEL calculations is also obtained from the MP2/6-31G(d,p) calculations and obtained energies are listed in Table S4. We have found that there are no significant deviations in the estimated energies using the ED obtained from the DFT and MP2 calculations in PIXEL.

Table 2
Lattice energy and intermolecular interaction energies of selected molecular dimers (kJmol−1) in rubrene obtained from the PIXEL calculations using the ED from the DFT method

The values reported in the first and second lines correspond to the crystal geometry at 100 K and 20 K, respectively. Symmetry operations are listed in Table 1[link].

Molecular dimers Interaction distance (Å) Centroid–centroid distance (Å) Ees Epol Edisp Erep Etot
Lattice energy −54.3 −33.6 −304.5 166.6 −225.8
−56.6 −35.0 −309.8 175.1 −226.3
Cπ⋯Cπ stackingi (dimer I) 3.706 (1) 7.160 (2) −8.5 −13.8 −110.2 62.7 −69.8
3.694 (1) 7.160 (2) −9.3 −14.4 −112.3 66.5 −69.5
C4⋯H5ii (dimer II) 2.825 (1) 7.953 (3) −15.2 −6.5 −61.9 35.2 −48.5
2.817 (1) 7.930 (2) −15.5 −6.7 −62.6 36.3 −48.5
H8⋯H8iv (dimer III) 2.268 (1) 13.875 (4) −6.6 −2.7 −24.2 14.6 −18.8
2.264 (1) 13.868 (3) −7.0 −2.8 −24.6 15.2 −19.1
H9⋯H9v (dimer IV) 2.667 (1) 15.170 (2) −1.1 −0.4 −7.6 2.4 −6.6
2.623 (1) 15.152 (2) −1.2 −0.5 −8.1 2.9 −6.9

Table 3
Lattice energy and intermolecular interaction energies of selected molecular dimers (kJ mol−1) in rubrene obtained using the ED models in XD2006

'Theory-multipole' values are from the multipole projection of theoretical static structure factors. Symmetry operations are listed in Table 1[link].

  ED model Method Erep Ees (includes Epol) Edisp Etot
Lattice energy 100 K Experimental 178.1 −64.2 −377.9 −264.0
Theory-multipole −67.5 −267.3
20 K Experimental 186.4 −69.6 −384.7 −267.9
Theory-multipole −63.4 −261.7
Cπ⋯Cπ stackingi (dimer I) 100 K Experimental 65.7 −4.1 −131.7 −70.1
Theory-multipole −9.0 −75.0
20 K Experimental 69.2 −4.2 −134.0 −69.0
Theory-multipole −7.4 −72.2
C4⋯H5ii (dimer II) 100 K Experimental 36.8 −9.3 −76.7 −49.2
Theory-multipole −13.9 −53.8
20 K Experimental 38.0 −10.7 −77.8 −50.5
Theory-multipole −13.8 −53.6
H8⋯H8iv (dimer III) 100 K Experimental 16.1 −10.4 −29.2 −23.5
Theory-multipole −4.1 −17.2
20 K Experimental 16.9 −7.2 −29.8 −20.1
Theory-multipole −4.5 −17.4
H9⋯H9v (dimer IV) 100 K Experimental 3.3 −0.1 −8.9 −5.8
Theory-multipole 0.0 −5.6
20 K Experimental 3.8 0.1 −9.4 −5.5
Theory-multipole 0.0 −5.6

In addition to the PIXEL calculations, the lattice energy and intermolecular interaction energies for selected molecular pairs were calculated from the ED model using the XDPROP module in XD2006 (Volkov et al., 2006[Volkov, A., Macchi, P., Farrugia, L. J., Gatti, C., Mallinson, P., Richter, T. & Koritsanszky, T. (2006). XD2006 - A Computer Program Package for Multipole Refinement, Topological Analysis of Charge Densities and Evaluation of Intermolecular Energies from Experimental and Theoretical Structure Factors.,.]). The resulting total energy is composed of electrostatic, exchange–repulsion and dispersion terms. The electrostatic term is estimated using the Exact Potential and Multipole Method (EP/MM) (Volkov et al., 2004[Volkov, A., Koritsanszky, T. & Coppens, P. (2004). Chem. Phys. Lett. 391, 170-175.]), while the exchange–repulsion and dispersion terms are approximated by Williams and Cox atom–atom potentials (Williams & Cox, 1984[Williams, D. E. & Cox, S. R. (1984). Acta Cryst. B40, 404-417.]). Obtained values from the ED models and corresponding theoretical models are listed in Table 3[link]. The derived energy values from the ED models are in good agreement with the PIXEL values for all interacting molecular dimers (I to IV), whereas the lattice energy deviates significantly in the ED models (see Tables 2[link] and 3[link]). In comparison with the PIXEL values, the maximum deviation of ∼ 7 kJ mol−1 was observed for the molecular dimer with Cπ⋯Cπ interactions (dimer I) in the theoretical ED model at 100 K. In contrast, a difference of ∼ 44 kJ mol−1 was found for lattice energies obtained in the ED models. The two methods use different schemes to evaluate lattice and intermolecular dimer energies and significant differences arise in the estimation of polarization energy contribution to the total energy (Gavezzotti, 2011[Gavezzotti, A. (2011). New J. Chem. 35, 1360-1368.]; Volkov et al., 2004[Volkov, A., Koritsanszky, T. & Coppens, P. (2004). Chem. Phys. Lett. 391, 170-175.]). In the multipole model (both experimental and theoretical models), the ED of one rubrene molecule is computed within the crystal, and therefore it inherently contains effects of polarization from the surrounding molecules in the crystal. Thus, the electrostatic energy (Ees) calculated for a pair of molecules is the sum of the unperturbed electrostatic interaction between the two molecules along with the polarization contributions due to the entire crystal. The Ees and Epol quantities cannot be retrieved separately from each other in the multipole method. However, in the PIXEL calculation, the electrostatic energy is that of the unperturbed molecules and the polarization energy is the mutual interaction of just the two molecules of each dimer. The Epol energy does not include the polarization contributions from the surrounding molecules in the crystal. Hence, the polarization energy contributes significantly to the observed deviations in the energy values from the PIXEL and multipole methods. Further, the small differences in the Ees contribution from the experimental and theoretical ED models is due to the multipole populations of atoms in the multipole model. The electrostatic energy calculation in the EP/MM method depends on the multipole parameters of the ED model (Volkov et al., 2004[Volkov, A., Koritsanszky, T. & Coppens, P. (2004). Chem. Phys. Lett. 391, 170-175.]). The slightly different multipole populations result in a deviation of estimated electrostatic energy in the ED model. Similarly, a detailed analysis of the discrepancy in estimating lattice energies from different multipole refinement models and thermal motion analysis for H atoms was recently reported in a study of sulfathiazole polymorphs (Sovago et al., 2014[Sovago, I., Gutmann, M. J., Hill, J. G., Senn, H. M., Thomas, L. H., Wilson, C. C. & Farrugia, L. J. (2014). Cryst. Growth Des. 14, 1227-1239.]). In this study, there are no significant deviations in the calculated energies from both the experimental and theoretical ED models at 100 K and 20 K using the EP/MM method. It is important to note that the entropic effects on energetics of intermolecular interactions are not accounted for in the comparison of energetics calculated using the 100 K and 20 K ED models. Further, the use of different schemes for the estimation of dispersion energy in PIXEL and XD methods also contributes to differences in the obtained lattice and interaction energies. To study the effect of the hydrogen modeling on the interaction energy of dimers, we refined a 100 K model using the ADPs of hydrogen obtained from the SHADE2 webserver (Madsen, 2006[Madsen, A. Ø. (2006). J. Appl. Cryst. 39, 757-758.]), i.e. an identical approach as the 20 K ED model. However, this did not change the interaction energy values of dimers significantly.

3.4. Non-covalent interactions (NCI) analysis

The electron density, ρ(r), between interacting atoms can be determined by the experimental measurements and theoretical calculations. The reduced density gradient [RDG = [\left| {\nabla \rho } \right|/2{(3{{\rm{\pi }}^2})^{1/3}}{\rho ^{4/3}}]], a dimensionless quantity, is derived using the ED and its first derivative in real space (Johnson et al., 2010[Johnson, E. R., Keinan, S., Mori-Sánchez, P., Contreras-García, J., Cohen, A. J. & Yang, W. T. (2010). J. Am. Chem. Soc. 132, 6498-6506.]; Saleh et al., 2012[Saleh, G., Gatti, C., Lo Presti, L. & Contreras-García, J. (2012). Chem. Eur. J. 18, 15523-15536.]). Low ED and low RDG values normally correspond to the non-covalent interactions (NCIs) between two interacting atoms. The NCI descriptor based on sign(λ2)ρ(r) is useful to characterize NCIs at each RDG isosurface point, where λ2 is the second largest eigenvalue of the ED Hessian matrix. The mapping of the quantity, sign(λ2)ρ(r) on RDG isosurfaces can distinguish stabilizing [sign(λ2)ρ(r) < 0] and destabilizing [sign(λ2)ρ(r) > 0] interactions. Here, they have been visualized by plotting the RDG isosurfaces using the MolIso program (Hubschle & Luger, 2006[Hübschle, C. B. & Luger, P. (2006). J. Appl. Cryst. 39, 901-904.]) see in Fig. 4[link]. Red isosurfaces correspond to stabilizing interactions and blue isosurfaces represent steric repulsive interaction regions. The Cπ⋯Cπ stacking interactions [d = 3.708 (1) Å at 100 K] between adjacent rubrene molecules is clearly seen as the isosurfaces filling the interlayer spaces between tetracene backbones in Fig. 4[link](a) obtained from the experimental ED model at 100 K. The observation of low density and low RDG isosurfaces between the stacked aromatic rings indicate the overall balance of steric (destabilizing) and dispersive (stabilizing) contributions (Johnson et al., 2010[Johnson, E. R., Keinan, S., Mori-Sánchez, P., Contreras-García, J., Cohen, A. J. & Yang, W. T. (2010). J. Am. Chem. Soc. 132, 6498-6506.]; Saleh et al., 2012[Saleh, G., Gatti, C., Lo Presti, L. & Contreras-García, J. (2012). Chem. Eur. J. 18, 15523-15536.]). The red and green regions on the NCI isosurfaces in Fig. 4[link](a) correspond to negative sign(λ2)ρ(r) values, which indicate the presence of stabilizing contributions provided by Cπ⋯Cπ interactions between the tetracene backbones. This is also supported by the QTAIM analysis where topological properties correspond to closed shell van der Waals interactions with significant contributions to the total interaction energy of molecular pairs connected by Cπ⋯Cπ interactions coming from the dispersion energy (Table 1[link], dimer I in Tables 2[link] and 3[link]). Additionally, the large surface area of the NCI isosurface corresponds to the delocalized nature of Cπ⋯Cπ stacking interactions. The NCI surfaces were related to the b.c.p.s of interaction obtained by the QTAIM analysis in the literature (Lane et al., 2013[Lane, J. R., Contreras-García, J., Piquemal, J. P., Miller, B. J. & Kjaergaard, H. G. (2013). J. Chem. Theory Comput. 9, 3263-3266.]; Saleh et al., 2012[Saleh, G., Gatti, C., Lo Presti, L. & Contreras-García, J. (2012). Chem. Eur. J. 18, 15523-15536.]) to obtain a global description of chemical bonding by the NCI analysis. In Fig. 4[link](a), the red and green isosurface corresponds to the regions surrounding the b.c.p. of Cπ⋯Cπ stacking interaction, whereas the blue isosurface coincides with ring critical points of the aromatic ring. The nature of ππ interactions has been explored by a large number of experimental and theoretical studies (Hunter & Sanders, 1990[Hunter, C. A. & Sanders, J. K. M. (1990). J. Am. Chem. Soc. 112, 5525-5534.]; Hunter et al., 2001[Hunter, C. A., Lawson, K. R., Perkins, J. & Urch, C. J. (2001). J Chem Soc Perk T 2 651-669.]; Meyer et al., 2003[Meyer, E. A., Castellano, R. K. & Diederich, F. (2003). Angew. Chem. Int. Ed. 42, 1210-1250.]; Sinnokrot et al., 2002[Sinnokrot, M. O., Valeev, E. F. & Sherrill, C. D. (2002). J. Am. Chem. Soc. 124, 10887-10893.]). Hunter & Sanders (1990[Hunter, C. A. & Sanders, J. K. M. (1990). J. Am. Chem. Soc. 112, 5525-5534.]) proposed a model to describe the nature of ππ interactions in porphyrin where the ππ interactions was favourable due to πσ interactions that overcome ππ repulsions. However, when a large surface area is available for stacking interactions, van der Waals interactions and desolvation contributions are also very important in the stability of the ππ interactions (Meyer et al., 2003[Meyer, E. A., Castellano, R. K. & Diederich, F. (2003). Angew. Chem. Int. Ed. 42, 1210-1250.]). The red and green regions in the isosurfaces of the ππ interaction (Fig. 4[link]a) indicate that the contribution of stabilizing interactions surpasses those of destabilizing interactions in the ππ stacking. This stacking interaction is expected to improve charge transport properties along the stacked aromatic layers as confirmed by good OFET characteristics observed in the direction of stacking layers. The pivotal role of aromatic ππ interactions in the formation of a molecular bridge between adjacent molecules has been experimentally demonstrated by molecular conductance measurements in oligo-phenylene ethynylene–monothiol molecules (Wu et al., 2008[Wu, S. M., González, M. T., Huber, R., Grunder, S., Mayor, M., Schönenberger, C. & Calame, M. (2008). Nature Nanotech, 3, 569-574.]), conjugated polymer poly(3-hexylthiophene) (Sirringhaus et al., 1999[Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P. & de Leeuw, D. M. (1999). Nature, 401, 685-688.]) and phenylene vinylene derivatives (Seferos et al., 2005[Seferos, D. S., Trammell, S. A., Bazan, G. C. & Kushmerick, J. G. (2005). Proc. Natl Acad. Sci. USA, 102, 8821-8825.]). The strong ππ coupling through intermolecular ππ interactions between molecular junctions is responsible for the efficient charge transport across the molecular junction and it was successfully demonstrated by the measurement of charge transport properties across the molecular junction (Wu et al., 2008[Wu, S. M., González, M. T., Huber, R., Grunder, S., Mayor, M., Schönenberger, C. & Calame, M. (2008). Nature Nanotech, 3, 569-574.]; Sirringhaus et al., 1999[Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P. & de Leeuw, D. M. (1999). Nature, 401, 685-688.]; Seferos et al., 2005[Seferos, D. S., Trammell, S. A., Bazan, G. C. & Kushmerick, J. G. (2005). Proc. Natl Acad. Sci. USA, 102, 8821-8825.]). Furthermore, the confirmation of ππ interactions from the NCI analysis correlate well with the topological properties obtained by the QTAIM analysis. Additionally, it supports earlier theoretical predictions (Wen et al., 2009[Wen, S. H., Li, A., Song, J. L., Deng, W. Q., Han, K. L. & Goddard, W. A. (2009). J. Phys. Chem. B, 113, 8813-8819.]; Kobayashi et al., 2013[Kobayashi, H., Kobayashi, N., Hosoi, S., Koshitani, N., Murakami, D., Shirasawa, R., Kudo, Y. & Hobara, D. (2013). J. Chem. Phys. pp. 139.]; Stehr et al., 2011[Stehr, V., Pfister, J., Fink, R. F., Engels, B. & Deibel, C. (2011). Phys. Rev. B, pp. 83.]) and single-crystal FET characteristics (Podzorov et al., 2004[Podzorov, V., Menard, E., Borissov, A., Kiryukhin, V., Rogers, J. A. & Gershenson, M. E. (2004). Phys. Rev. Lett. pp. 93.]), where an anisotropic charge transfer was observed for rubrene with the highest charge mobility along the crystallographic b axis due to the stacking interactions between the tetracene backbones. RDG isosurfaces for the C4⋯H5 interaction are highlighted in Fig. 4[link](b). The green RDG isosurface is localized between the C and H atoms demonstrate the presence of C⋯H interactions in the crystal packing. A green oblate RDG isosurface in Fig. 4[link](c) is found for the homopolar C8—H8⋯H8—C8 interaction (perpendicular to the Cπ⋯Cπ stacking interactions). The two smaller isosurface discs seen close to the larger RDG isosurface of the H8—H8 bonding correspond to subtle C9—H9⋯H8—C8 interactions [2.745 (2) Å] in Fig. 4[link](c). This distance is much longer than the sum of the van der Waals radii of H—H bonding (2.4 Å) and has much smaller contribution to the crystal packing. These observations are also supported by interaction energy calculations using the PIXEL and multipole methods (see above). The NCI analysis complements the QTAIM analysis. In the latter approach, only a limited number of bcps corresponding to C⋯C interactions was found, while in the NCI, the low values of the RDG indicate significant intermolecular interactions (Fig. 4[link]a).

[Figure 4]
Figure 4
RDG-based NCI isosurfaces obtained from the experimental ED model at 100 K for (a) Cπ⋯Cπ stacking interactions, (b) C4⋯H5 interaction and (c) homopolar H8—H8 bond. NCI isosurfaces corresponding to RDG = 0.6 a.u. The surfaces are colored on a red–green–blue–purple scale [−0.020 < sign(λ2)ρ < 0.020 a.u.]. Red, green and blue/purple indicate stabilizing, intermediate and destabilizing overlap regions, respectively. Symmetry operations are listed in Table 1[link].

Even though the electron density study does not provide direct information on the observed physical properties of rubrene, it is still useful to experimentally establish the factors such as intermolecular interactions, which are responsible for the semiconducting properties in the solid state. In the solid state, the packing of molecules dictates interesting physical and chemical properties of the compound. Topological properties, NCI analysis and energetics of intermolecular interactions further confirm the nature and strength of chemical interactions in governing the close packing of molecules in the crystalline lattice. It is interesting to note that there is very little qualitative or quantitative change in the intermolecular interactions in rubrene when the temperature is changed from 20 K to 100 K. Podzorov et al. (2004[Podzorov, V., Menard, E., Borissov, A., Kiryukhin, V., Rogers, J. A. & Gershenson, M. E. (2004). Phys. Rev. Lett. pp. 93.]) reported the carrier mobility in rubrene crystals as a function of temperature and observed two distinct regimes below and above 150 K. In the temperature range 150–300 K the mobility is intrinsic and highly anisotropic with the mobility along the b-axis being 2–3 times larger than along the a-axis. This supports the significance of the ππ interactions for the electron transport. From 100 K to 150 K the transport mechanism changes, and the mobility becomes almost isotropic and dominated by defect traps. In the present study it is shown that the electron density at 20 K and 100 K is virtually unchanged, so if transport data could be measured below 100 K, then any potential change in mechanism is unlikely to be be due to changes in the intrinsic properties of rubrene.

4. Conclusions

Using high-resolution X-ray and neutron diffraction data, a high-quality X–N ED model was obtained for rubrene at 100 K. Furthermore, high-resolution synchrotron X-ray data up to (sinθ/λ)max = 1.51 Å−1 were collected at 20 K to obtain precise ED distributions with minimum perturbations from thermal vibration of atoms. Comparison of the results obtained at 20 K and 100 K, respectively, confirms that the most accurate experimental EDs for organic molecules can be obtained at the lowest possoible temperature using the X–N procedure. The combined topological properties of the ED, the NCI analysis and the interaction energies from both experimental and theoretical models confirm the presence of ππ stacking interactions (dimer energy of ∼ −68.5 kJ mol−1) between the tetracene backbones of rubrene in the crystal packing. The ππ stacking interactions along the b-axis are unaltered (no slippage) by C—H⋯C interactions (dimer energy of ∼−49.0 kJ mol−1) observed in the herringbone packing motif. Additionally, homopolar H—H bonds (H8—H8) between the phenyl rings display the shortest interaction distance of 2.269 (1) Å among all H—H interactions found in the crystal structure. The molecular pairs connected by H—H bonding in rubrene are found to have interaction energies in the range 0 to −24 kJ mol−1. The quantitative analysis of H—H interactions provides more insight into the nature of these chemical interactions in terms of derived topological properties and interaction energies. There were no significant changes in the topological properties of ED and interaction energies from the 100 K and 20 K ED models. Interaction energies of molecular dimers obtained from the ED models are in good agreement with the PIXEL values. The calculation of different energy contributions to lattice and intermolecular interaction energies demonstrate that the crystal structure and physical properties of rubrene in the solid state are mainly governed by the dispersion energy component of intermolecular interactions. The quantitative analysis of non-covalent interactions brings out the significant role of weak intermolecular interactions in dictating the crystal structure and physical properties of orthorhombic rubrene in the crystalline state.

Supporting information


Computing details top

Data collection: Rigaku RAPID-AUTO for rubrene_20K; CrysAlis PRO, Agilent Technologies, Version 1.171.36.28 for rubrene_100K. Cell refinement: Rigaku RAPID-AUTO for rubrene_20K; CrysAlis PRO, Agilent Technologies, Version 1.171.36.28 for rubrene_100K. Data reduction: Rigaku RAPID-AUTO for rubrene_20K; CrysAlis PRO, Agilent Technologies, Version 1.171.36.28 for rubrene_100K. For both compounds, program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: XD2006 (Volkov et al., 2006); software used to prepare material for publication: XD2006 (Volkov et al., 2006).

(rubrene_20K) top
Crystal data top
C42H28Z = 4
Mr = 532.64F(000) = 1120
Orthorhombic, CmcaDx = 1.303 Mg m3
Hall symbol: -C 2bc 2Synchrotron,monochromatic radiation, λ = 0.35312 Å
a = 26.7965 (5) ŵ = 0.03 mm1
b = 7.1599 (1) ÅT = 20 K
c = 14.1519 (3) ÅBlock, orange
V = 2715.19 (9) Å30.10 × 0.09 × 0.08 mm
Data collection top
Rigaku kappa
diffractometer
14111 reflections with > 3σ(I)
Radiation source: SPring-8,BL02B1Rint = 0.051
Absorption correction: empirical (using intensity measurements)
SORTAV (Blessing, 1995)
θmax = 32.4°, θmin = 0.8°
Tmin = 0.997, Tmax = 0.998h = 081
441669 measured reflectionsk = 021
19969 independent reflectionsl = 042
Refinement top
Refinement on F2384 parameters
Least-squares matrix: full0 restraints
R[F2 > 2σ(F2)] = 0.02 w2 = 1/[s2(Fo2)]
wR(F2) = 0.039(Δ/σ)max < 0.001
S = 1.04Δρmax = 0.23 e Å3
14111 reflectionsΔρmin = 0.19 e Å3
Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
C(1)0.027363 (4)000.006
C(2)0.053282 (3)0.144726 (10)0.049020 (5)0.006
C(3)0.026881 (3)0.296465 (9)0.087609 (5)0.006
C(4)0.052190 (3)0.448123 (11)0.134043 (6)0.008
C(5)0.026565 (3)0.591212 (11)0.175632 (6)0.009
C(6)0.107690 (3)0.135027 (10)0.072749 (5)0.007
C(7)0.142988 (3)0.249463 (11)0.028385 (6)0.008
C(8)0.192345 (3)0.252907 (13)0.059457 (7)0.01
C(9)0.207491 (3)0.140269 (14)0.134836 (7)0.011
C(10)0.172652 (3)0.025087 (14)0.179449 (6)0.01
C(11)0.123090 (3)0.023814 (12)0.148752 (6)0.009
H(4)0.0926170.4491820.1364820.022
H(5)0.0465250.7048030.2098970.022
H(7)0.1324950.3379280.0307170.022
H(8)0.2187570.3447620.0244930.026
H(9)0.2462070.1439060.1573990.027
H(10)0.18310.0641910.2382760.026
H(11)0.094920.0626810.1819760.022
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
C(1)0.00594 (3)0.00549 (2)0.00653 (2)000.001011 (18)
C(2)0.006113 (19)0.005691 (16)0.006709 (18)0.000187 (14)0.000157 (14)0.000935 (13)
C(3)0.00677 (2)0.005548 (16)0.006687 (17)0.000227 (14)0.000030 (14)0.001009 (13)
C(4)0.00803 (2)0.006719 (19)0.00851 (2)0.000971 (16)0.000329 (16)0.001940 (15)
C(5)0.00960 (2)0.006730 (19)0.00925 (2)0.000759 (17)0.000236 (18)0.002363 (16)
C(6)0.00627 (2)0.006660 (17)0.006793 (17)0.000488 (15)0.000225 (14)0.000088 (14)
C(7)0.00721 (2)0.00807 (2)0.00909 (2)0.000699 (17)0.000474 (17)0.001061 (17)
C(8)0.00689 (2)0.01029 (2)0.01197 (3)0.001256 (18)0.000665 (18)0.00028 (2)
C(9)0.00732 (2)0.01291 (3)0.01146 (3)0.00029 (2)0.001456 (19)0.00048 (2)
C(10)0.00899 (3)0.01271 (3)0.00913 (2)0.00026 (2)0.002060 (19)0.00143 (2)
C(11)0.00810 (2)0.00964 (2)0.00779 (2)0.000751 (18)0.000749 (16)0.001554 (17)
H(4)0.0129050.0242460.0301280.0018640.0005430.005227
H(5)0.0240010.0173280.0244710.0057780.0016130.007315
H(7)0.0223810.0227790.021670.0004450.0017530.009321
H(8)0.0183720.0274410.0311580.0076880.0030260.006688
H(9)0.0133290.0370080.0320830.0018820.0063940.00323
H(10)0.0245190.0311530.0219690.0021090.0057310.010086
H(11)0.0190550.0246560.0233690.005210.0015680.0078
Geometric parameters (Å, º) top
C(1)—C(1)i1.4665 (2)C(6)—C(7)1.4001 (1)
C(1)—C(1)ii1.4665 (2)C(6)—C(11)1.4004 (1)
C(1)—C(2)1.4274 (1)C(7)—C(8)1.3940 (1)
C(1)—C(2)iii1.4274 (1)C(7)—H(7)1.0862 (1)
C(2)—C(3)1.4068 (1)C(8)—C(9)1.3975 (1)
C(2)—C(6)1.4977 (1)C(8)—H(8)1.0855 (1)
C(3)—C(3)i1.4406 (2)C(9)—C(10)1.3965 (1)
C(3)—C(4)1.4390 (1)C(9)—H(9)1.0858 (1)
C(4)—C(5)1.3666 (1)C(10)—C(11)1.3974 (1)
C(4)—H(4)1.0839 (1)C(10)—H(10)1.0863 (1)
C(5)—C(5)i1.4237 (2)C(11)—H(11)1.0837 (1)
C(5)—H(5)1.0875 (1)
C(1)i—C(1)—C(2)119.116 (5)C(2)—C(6)—C(7)122.003 (7)
C(1)i—C(1)—C(2)iii119.116 (5)C(2)—C(6)—C(11)119.039 (7)
C(1)ii—C(1)—C(2)119.116 (5)C(7)—C(6)—C(11)118.561 (7)
C(1)ii—C(1)—C(2)iii119.116 (5)C(6)—C(7)—C(8)120.656 (8)
C(2)—C(1)—C(2)iii121.767 (9)C(6)—C(7)—H(7)120.776 (7)
C(1)—C(2)—C(3)120.306 (7)C(8)—C(7)—H(7)118.567 (7)
C(1)—C(2)—C(6)123.296 (7)C(7)—C(8)—C(9)120.405 (8)
C(1)iii—C(2)—C(3)120.306 (7)C(7)—C(8)—H(8)119.048 (9)
C(1)iii—C(2)—C(6)123.296 (7)C(9)—C(8)—H(8)120.546 (8)
C(3)—C(2)—C(6)115.995 (6)C(8)—C(9)—C(10)119.454 (8)
C(2)—C(3)—C(3)i120.191 (4)C(8)—C(9)—H(9)119.217 (9)
C(2)—C(3)—C(4)121.534 (7)C(10)—C(9)—H(9)121.328 (9)
C(3)i—C(3)—C(4)118.117 (4)C(9)—C(10)—C(11)119.911 (8)
C(3)—C(4)—C(5)121.706 (7)C(9)—C(10)—H(10)121.445 (8)
C(3)—C(4)—H(4)119.396 (7)C(11)—C(10)—H(10)118.644 (9)
C(5)—C(4)—H(4)118.897 (7)C(6)—C(11)—C(10)121.006 (8)
C(4)—C(5)—C(5)i120.164 (5)C(6)—C(11)—H(11)116.930 (7)
C(4)—C(5)—H(5)120.370 (8)C(10)—C(11)—H(11)122.064 (8)
C(5)i—C(5)—H(5)119.460 (4)
Symmetry codes: (i) x, y, z; (ii) x, y, z; (iii) x, y, z.
(rubrene_100K) top
Crystal data top
C42H28Z = 4
Mr = 532.64F(000) = 1120
Orthorhombic, CmcaDx = 1.298 Mg m3
Hall symbol: -C 2bc 2Mo Kα radiation, λ = 0.7107 Å
a = 26.8106 (3) ŵ = 0.07 mm1
b = 7.1602 (1) ÅT = 100 K
c = 14.2029 (1) ÅBlock, orange
V = 2726.52 (5) Å30.24 × 0.22 × 0.18 mm
Data collection top
Xcalibur, Eos, SuperNova
diffractometer
7704 independent reflections
Radiation source: SuperNova (Mo) X-ray Source6070 reflections with > 3σ(I)
Mirror monochromatorRint = 0.033
Detector resolution: 10.3590 pixels mm-1θmax = 51.4°, θmin = 2.9°
ω scansh = 058
Absorption correction: analytical
A face indexed analytical absorption correction was performed.
k = 015
Tmin = 0.983, Tmax = 0.987l = 031
83536 measured reflections
Refinement top
Refinement on F2384 parameters
Least-squares matrix: full0 restraints
R[F2 > 2σ(F2)] = 0.022 w2 = 1/[s2(Fo2)]
wR(F2) = 0.055(Δ/σ)max < 0.001
S = 1.50Δρmax = 0.18 e Å3
6070 reflectionsΔρmin = 0.18 e Å3
Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
C(1)0.027309 (10)000.01
C(2)0.053210 (7)0.14439 (3)0.048944 (14)0.01
C(3)0.026842 (7)0.29588 (3)0.087620 (14)0.011
C(4)0.052115 (9)0.44715 (3)0.133975 (16)0.014
C(5)0.026536 (9)0.59004 (3)0.175528 (17)0.015
C(6)0.107557 (8)0.13458 (3)0.072680 (15)0.012
C(7)0.142857 (8)0.24862 (3)0.028629 (18)0.015
C(8)0.192099 (9)0.25175 (4)0.05960 (2)0.019
C(9)0.207154 (10)0.13946 (5)0.13449 (2)0.021
C(10)0.172329 (11)0.02457 (5)0.17890 (2)0.02
C(11)0.122819 (9)0.02346 (4)0.148318 (17)0.016
H(4)0.0925310.4478650.1357650.031
H(5)0.0466370.7024140.2103670.034
H(7)0.1327930.3354480.0311350.033
H(8)0.2184560.3435940.0246440.04
H(9)0.245950.1389680.156420.043
H(10)0.1811340.0685060.236970.043
H(11)0.0947710.0630730.1817150.035
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
C(1)0.01000 (8)0.00908 (9)0.01082 (9)000.00129 (7)
C(2)0.01059 (6)0.00980 (6)0.01105 (7)0.00073 (5)0.00006 (5)0.00127 (5)
C(3)0.01223 (7)0.00932 (7)0.01059 (7)0.00080 (5)0.00021 (5)0.00134 (5)
C(4)0.01506 (8)0.01171 (7)0.01389 (8)0.00276 (6)0.00110 (6)0.00329 (6)
C(5)0.01878 (9)0.01133 (8)0.01539 (8)0.00202 (6)0.00075 (6)0.00393 (6)
C(6)0.01087 (7)0.01189 (7)0.01177 (7)0.00131 (5)0.00026 (5)0.00054 (5)
C(7)0.01232 (7)0.01444 (8)0.01764 (9)0.00171 (6)0.00204 (6)0.00101 (7)
C(8)0.01158 (8)0.02028 (11)0.02499 (11)0.00271 (7)0.00227 (7)0.00170 (9)
C(9)0.01256 (8)0.02727 (13)0.02335 (11)0.00031 (8)0.00327 (7)0.00381 (10)
C(10)0.01675 (9)0.02708 (13)0.01697 (10)0.00137 (9)0.00508 (7)0.00137 (9)
C(11)0.01469 (8)0.01875 (9)0.01331 (8)0.00127 (7)0.00174 (6)0.00236 (7)
H(4)0.020460.03170.039960.004870.001830.01129
H(5)0.03460.02640.04150.007720.00030.01518
H(7)0.03010.03360.034860.001630.000990.01463
H(8)0.02390.03870.0560.008670.007980.0074
H(9)0.020140.05920.04950.001060.009680.0017
H(10)0.03790.05750.03430.00460.012630.0157
H(11)0.02970.04170.034190.008190.000410.015661
Geometric parameters (Å, º) top
C(1)—C(1)i1.4643 (5)C(6)—C(7)1.3978 (3)
C(1)—C(1)ii1.4643 (5)C(6)—C(11)1.3980 (3)
C(1)—C(2)1.4263 (2)C(7)—C(8)1.3917 (3)
C(1)—C(2)iii1.4263 (2)C(7)—H(7)1.0862 (3)
C(2)—C(3)1.4065 (3)C(8)—C(9)1.3931 (5)
C(2)—C(6)1.4972 (3)C(8)—H(8)1.0855 (3)
C(3)—C(3)i1.4393 (4)C(9)—C(10)1.3951 (4)
C(3)—C(4)1.4372 (3)C(9)—H(9)1.0858 (3)
C(4)—C(5)1.3658 (3)C(10)—C(11)1.3967 (3)
C(4)—H(4)1.0839 (2)C(10)—H(10)1.0863 (3)
C(5)—C(5)i1.4229 (5)C(11)—H(11)1.0837 (2)
C(5)—H(5)1.0875 (2)
C(1)i—C(1)—C(2)119.135 (12)C(2)—C(6)—C(7)122.05 (2)
C(1)i—C(1)—C(2)iii119.135 (12)C(2)—C(6)—C(11)118.984 (19)
C(1)ii—C(1)—C(2)119.135 (12)C(7)—C(6)—C(11)118.57 (2)
C(1)ii—C(1)—C(2)iii119.135 (12)C(6)—C(7)—C(8)120.68 (2)
C(2)—C(1)—C(2)iii121.73 (2)C(6)—C(7)—H(7)121.06 (2)
C(1)—C(2)—C(3)120.309 (18)C(8)—C(7)—H(7)118.26 (2)
C(1)—C(2)—C(6)123.336 (19)C(7)—C(8)—C(9)120.46 (3)
C(1)iii—C(2)—C(3)120.309 (18)C(7)—C(8)—H(8)118.87 (3)
C(1)iii—C(2)—C(6)123.336 (19)C(9)—C(8)—H(8)120.68 (3)
C(3)—C(2)—C(6)115.939 (18)C(8)—C(9)—C(10)119.45 (3)
C(2)—C(3)—C(3)i120.175 (11)C(8)—C(9)—H(9)119.90 (3)
C(2)—C(3)—C(4)121.543 (19)C(10)—C(9)—H(9)120.63 (3)
C(3)i—C(3)—C(4)118.129 (12)C(9)—C(10)—C(11)119.92 (3)
C(3)—C(4)—C(5)121.72 (2)C(9)—C(10)—H(10)124.03 (3)
C(3)—C(4)—H(4)119.05 (2)C(11)—C(10)—H(10)116.05 (3)
C(5)—C(4)—H(4)119.23 (2)C(6)—C(11)—C(10)120.93 (2)
C(4)—C(5)—C(5)i120.139 (14)C(6)—C(11)—H(11)117.30 (2)
C(4)—C(5)—H(5)120.13 (2)C(10)—C(11)—H(11)121.78 (2)
C(5)i—C(5)—H(5)119.707 (13)
C(1)i—C(1)—C(2)—C(3)7.068 (16)C(2)—C(6)—C(7)—C(8)172.57 (3)
C(1)i—C(1)—C(2)—C(6)165.23 (3)C(2)—C(6)—C(7)—H(7)8.32 (2)
C(1)ii—C(1)—C(2)—C(3)7.068 (16)C(2)—C(6)—C(11)—C(10)173.55 (3)
C(1)ii—C(1)—C(2)—C(6)165.23 (3)C(2)—C(6)—C(11)—H(11)6.620 (19)
C(2)iii—C(1)—C(2)—C(3)172.93 (3)C(11)—C(6)—C(7)—C(8)0.16 (2)
C(2)iii—C(1)—C(2)—C(6)14.773 (18)C(7)—C(6)—C(11)—C(10)0.60 (2)
C(1)—C(2)—C(3)—C(4)177.45 (3)C(11)—C(6)—C(7)—H(7)178.96 (3)
C(1)—C(2)—C(6)—C(7)110.10 (3)C(7)—C(6)—C(11)—H(11)179.57 (3)
C(1)—C(2)—C(6)—C(11)77.21 (2)C(6)—C(7)—C(8)—C(9)0.72 (3)
C(1)iii—C(2)—C(3)—C(4)177.45 (3)C(6)—C(7)—C(8)—H(8)178.97 (4)
C(1)iii—C(2)—C(6)—C(7)110.10 (3)H(7)—C(7)—C(8)—C(9)178.42 (4)
C(1)iii—C(2)—C(6)—C(11)77.21 (2)H(7)—C(7)—C(8)—H(8)1.89 (2)
C(6)—C(2)—C(3)—C(4)9.706 (19)C(7)—C(8)—C(9)—C(10)0.53 (3)
C(3)—C(2)—C(6)—C(7)77.30 (2)C(7)—C(8)—C(9)—H(9)177.69 (5)
C(3)—C(2)—C(6)—C(11)95.39 (3)H(8)—C(8)—C(9)—C(10)179.16 (5)
C(3)i—C(3)—C(2)—C(1)7.142 (17)H(8)—C(8)—C(9)—H(9)2.63 (3)
C(3)i—C(3)—C(2)—C(6)165.70 (3)C(8)—C(9)—C(10)—C(11)0.22 (3)
C(2)—C(3)—C(4)—C(5)176.84 (3)C(8)—C(9)—C(10)—H(10)179.04 (5)
C(2)—C(3)—C(4)—H(4)3.349 (19)H(9)—C(9)—C(10)—C(11)178.42 (5)
C(3)i—C(3)—C(4)—C(5)1.34 (2)H(9)—C(9)—C(10)—H(10)0.84 (3)
C(3)i—C(3)—C(4)—H(4)178.85 (3)C(9)—C(10)—C(11)—C(6)0.79 (3)
C(3)—C(4)—C(5)—H(5)179.75 (4)C(9)—C(10)—C(11)—H(11)179.38 (4)
H(4)—C(4)—C(5)—H(5)0.44 (2)H(10)—C(10)—C(11)—C(6)178.53 (4)
C(5)i—C(5)—C(4)—C(3)1.37 (2)H(10)—C(10)—C(11)—H(11)1.29 (2)
C(5)i—C(5)—C(4)—H(4)178.82 (3)
Symmetry codes: (i) x, y, z; (ii) x, y, z; (iii) x, y, z.
 

Acknowledgements

This work was supported by the Danish National Research Foundation (DNRF93) and the Danish Council for Nature and Universe (DanScatt). Research conducted at the Spallation Neutron Source, Oak Ridge National Laboratory was sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, US Department of Energy. The synchrotron radiation experiment at BL02B1/SPring8, Japan, was conducted with the approval of the Japan Synchrotron Radiation Research Institute (Proposal No: 2014A0078).

References

First citationBader, R. F. W. (1990). Atoms in molecules – a quantum theory. Clarendon: Oxford.  Google Scholar
First citationBecke, A. D. (1993). J. Chem. Phys. 98, 5648–5652.  CrossRef CAS Web of Science Google Scholar
First citationBergantin, S. & Moret, M. (2012). Cryst. Growth Des. 12, 6035–6041.  Web of Science CrossRef CAS Google Scholar
First citationBiegler-könig, F. W., Bader, R. F. W. & Tang, T. H. (1982). J. Comput. Chem. 3, 317–328.  Google Scholar
First citationBlessing, R. H. (1995). Acta Cryst. A51, 33–38.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationBraun, D. E., Bhardwaj, R. M., Arlin, J. B., Florence, A. J., Kahlenberg, V., Griesser, U. J., Tocher, D. A. & Price, S. L. (2013). Cryst. Growth Des. 13, 4071–4083.  Web of Science CSD CrossRef CAS PubMed Google Scholar
First citationCoppens, P. (1967). Science, 158, 1577–1579.  CSD CrossRef PubMed CAS Web of Science Google Scholar
First citationCoropceanu, V., Cornil, J., da Silva Filho, D. A., Olivier, Y., Silbey, R. & Brédas, J. L. (2007). Chem. Rev. 107, 926–952.  Web of Science CrossRef PubMed CAS Google Scholar
First citationDelgado, M. C. R., Pigg, K. R., da Silva Filho, D. A., Gruhn, N. E., Sakamoto, Y., Suzuki, T., Osuna, R. M., Casado, J., Hernández, V., Navarrete, J. T. L., Martinelli, N. G., Cornil, J., Sánchez-Carrera, R. S., Coropceanu, V. & Brédas, J. L. (2009). J. Am. Chem. Soc. 131, 1502–1512.  Web of Science CrossRef PubMed CAS Google Scholar
First citationDong, H. L., Wang, C. L. & Hu, W. P. (2010). Chem. Commun. 46, 5211–5222.  Web of Science CrossRef CAS Google Scholar
First citationDovesi, R., Orlando, R., Erba, A., Zicovich-Wilson, C. M., Civalleri, B., Casassa, S., Maschio, L., Ferrabone, M., De La Pierre, M., D'Arco, P., Noël, Y., Causà, M., Rérat, M. & Kirtman, B. (2014). Int. J. Quantum Chem. 114, 1287–1317.  Web of Science CrossRef CAS Google Scholar
First citationDunitz, J. D. & Gavezzotti, A. (2012). Cryst. Growth Des. 12, 5873–5877.  Web of Science CrossRef CAS Google Scholar
First citationEcheverría, J., Aullón, G., Danovich, D., Shaik, S. & Alvarez, S. (2011). Nat. Chem. 3, 323–330.  Web of Science PubMed Google Scholar
First citationEspinosa, E., Alkorta, I., Elguero, J. & Molins, E. (2002). J. Chem. Phys. 117, 5529–5542.  Web of Science CrossRef CAS Google Scholar
First citationFacchetti, A. (2007). Mater. Today, 10, 28–37.  Web of Science CrossRef CAS Google Scholar
First citationFarrugia, L. J. (2012). J. Appl. Cryst. 45, 849–854.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationFiggis, B. N., Iversen, B. B., Larsen, F. K. & Reynolds, P. A. (1993). Acta Cryst. B49, 794–806.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationFrisch, M. J., Trucks, G. W., Schlegel, H. B., Scuseria, G. E., Robb, M. A., Cheeseman, J. R., Scalmani, G., Barone, V., Mennucci, B., Petersson, G. A., Nakatsuji, H., Caricato, M., Li, X., Hratchian, H. P., Izmaylov, A. F., Bloino, J., Zheng, G., Sonnenberg, J. L., Hada, M., Ehara, M., Toyota, K., Fukuda, R., Hasegawa, J., Ishida, M., Nakajima, T., Honda, Y., Kitao, O., Nakai, H., Vreven, T., Montgomery, J. J. A., Peralta, J. E., Ogliaro, F., Bearpark, M., Heyd, J. J., Brothers, E., Kudin, K. N., Staroverov, V. N., Kobayashi, R., Normand, J., Raghavachari, K., Rendell, A., Burant, J. C., Iyengar, S. S., Tomasi, J., Cossi, M., Rega, N., Millam, J. M., Klene, M., Knox, J. E., Cross, J. B., Bakken, V., Adamo, C., Jaramillo, J., Gomperts, R., Stratmann, R. E., Yazyev, O., Austin, A. J., Cammi, R., Pomelli, C., Ochterski, J. W., Martin, R. L., Morokuma, K., Zakrzewski, V. G., Voth, G. A., Salvador, P., Dannenberg, J. J., Dapprich, S., Daniels, A. D., Farkas, O., Foresman, J. B., Ortiz, J. V., Cioslowski, J. & Fox, D. J. (2009). Gaussian 09, revision A. 02; Gaussian, Inc., Wallingford, CT.  Google Scholar
First citationFumagalli, E., Raimondo, L., Silvestri, L., Moret, M., Sassella, A. & Campione, M. (2011). Chem. Mater. 23, 3246–3253.  Web of Science CSD CrossRef CAS Google Scholar
First citationGatti, C., Saunders, V. R. & Roetti, C. (1994). J. Chem. Phys. 101, 10686–10696.  CrossRef CAS Web of Science Google Scholar
First citationGavezzotti, A. (2008). Mol. Phys. 106, 1473–1485.  Web of Science CrossRef CAS Google Scholar
First citationGavezzotti, A. (2011). New J. Chem. 35, 1360–1368.  Web of Science CrossRef CAS Google Scholar
First citationGrabowski, S. J., Sokalski, W. A. & Leszczynski, J. (2007). Chem. Phys. 337, 68–76.  Web of Science CrossRef CAS Google Scholar
First citationHansen, N. K. & Coppens, P. (1978). Acta Cryst. A34, 909–921.  CrossRef CAS IUCr Journals Web of Science Google Scholar
First citationHasegawa, T. & Takeya, J. (2009). Sci. Technol. Adv. Mater. pp. 10.  Google Scholar
First citationHirshfeld, F. L. (1976). Acta Cryst. A32, 239–244.  CrossRef IUCr Journals Web of Science Google Scholar
First citationHübschle, C. B. & Luger, P. (2006). J. Appl. Cryst. 39, 901–904.  Web of Science CrossRef IUCr Journals Google Scholar
First citationHulea, I. N., Fratini, S., Xie, H., Mulder, C. L., Iossad, N. N., Rastelli, G., Ciuchi, S. & Morpurgo, A. F. (2006). Nat. Mater. 5, 982–986.  Web of Science CrossRef PubMed CAS Google Scholar
First citationHunter, C. A., Lawson, K. R., Perkins, J. & Urch, C. J. (2001). J Chem Soc Perk T 2 651–669.  Google Scholar
First citationHunter, C. A. & Sanders, J. K. M. (1990). J. Am. Chem. Soc. 112, 5525–5534.  CrossRef CAS Web of Science Google Scholar
First citationIversen, B. B., Larsen, F. K., Figgis, B. N. & Reynolds, P. A. (1997). Dalton Trans. 13, 2227–2240.  CrossRef Web of Science Google Scholar
First citationJiang, H. & Kloc, C. (2013). MRS Bull. 38, 28–33.  Web of Science CrossRef Google Scholar
First citationJohnson, E. R., Keinan, S., Mori-Sánchez, P., Contreras-García, J., Cohen, A. J. & Yang, W. T. (2010). J. Am. Chem. Soc. 132, 6498–6506.  Web of Science CrossRef CAS PubMed Google Scholar
First citationJørgensen, M. R. V., Hathwar, V. R., Sist, M., Wang, X., Hoffmann, C. M., Briseno, A. L., Overgaard, J. & Iversen, B. B. (2014). Acta Cryst. A70, 679–681.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationJurchescu, O. D., Meetsma, A. & Palstra, T. T. M. (2006). Acta Cryst. B62, 330–334.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationJurchescu, O. D., Popinciuc, M., van Wees, B. J. & Palstra, T. T. M. (2007). Adv. Mater. 19, 688–692.  Web of Science CrossRef CAS Google Scholar
First citationKobayashi, H., Kobayashi, N., Hosoi, S., Koshitani, N., Murakami, D., Shirasawa, R., Kudo, Y. & Hobara, D. (2013). J. Chem. Phys. pp. 139.  Google Scholar
First citationLane, J. R., Contreras-García, J., Piquemal, J. P., Miller, B. J. & Kjaergaard, H. G. (2013). J. Chem. Theory Comput. 9, 3263–3266.  Web of Science CrossRef CAS Google Scholar
First citationLarson, A. C. & Von Dreele, R. B. (1994). Los Alamos National Laboratory Report LAUR 86–748..  Google Scholar
First citationLezama, I. G. & Morpurgo, A. F. (2013). MRS Bull. 38, 51–56.  Web of Science CrossRef CAS Google Scholar
First citationLi, H. Y., Tee, B. C. K., Cha, J. J., Cui, Y., Chung, J. W., Lee, S. Y. & Bao, Z. N. (2012). J. Am. Chem. Soc. 134, 2760–2765.  Web of Science CrossRef CAS PubMed Google Scholar
First citationLu, Y. X., Zou, J. W., Wang, Y. H. & Yu, Q. S. (2007). Chem. Phys. 334, 1–7.  Web of Science CrossRef CAS Google Scholar
First citationMacchi, P. & Coppens, P. (2001). Acta Cryst. A57, 656–662.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationMacchi, P., Proserpio, D. M. & Sironi, A. (1998). J. Am. Chem. Soc. 120, 1447–1455.  Web of Science CSD CrossRef CAS Google Scholar
First citationMadsen, A. Ø. (2006). J. Appl. Cryst. 39, 757–758.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationMannsfeld, S. C. B., Tee, B. C. K., Stoltenberg, R. M., Chen, C. V. H. H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C. & Bao, Z. N. (2010). Nat. Mater. 9, 859–864.  Web of Science CrossRef CAS PubMed Google Scholar
First citationMaschio, L., Civalleri, B., Ugliengo, P. & Gavezzotti, A. (2011). J. Phys. Chem. A, 115, 11179–11186.  Web of Science CrossRef CAS PubMed Google Scholar
First citationMastrogiovanni, D. D. T., Mayer, J., Wan, A. S., Vishnyakov, A., Neimark, A. V., Podzorov, V., Feldman, L. C. & Garfunkel, E. (2014). Sci. Rep. 4, 4753.  Web of Science CrossRef PubMed Google Scholar
First citationMatta, C. F., Hernández-Trujillo, J., Tang, T. H. & Bader, R. F. W. (2003). Chem. Eur. J. 9, 1940–1951.  Web of Science CrossRef PubMed CAS Google Scholar
First citationMcGarry, K. A., Xie, W., Sutton, C., Risko, C., Wu, Y. F., Young, V. G., Brédas, J. L., Frisbie, C. D. & Douglas, C. J. (2013). Chem. Mater. 25, 2254–2263.  Web of Science CSD CrossRef CAS Google Scholar
First citationMeyer, E. A., Castellano, R. K. & Diederich, F. (2003). Angew. Chem. Int. Ed. 42, 1210–1250.  Web of Science CrossRef CAS Google Scholar
First citationMishra, A. & Bäuerle, P. (2012). Angew. Chem. Int. Ed. 51, 2020–2067.  Web of Science CrossRef CAS Google Scholar
First citationMorgenroth, W., Overgaard, J., Clausen, H. F., Svendsen, H., Jørgensen, M. R. V., Larsen, F. K. & Iversen, B. B. (2008). J. Appl. Cryst. 41, 846–853.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationMurphy, A. R. & Fréchet, J. M. J. (2007). Chem. Rev. 107, 1066–1096.  Web of Science CrossRef PubMed CAS Google Scholar
First citationNguyen, T. H., Groundwater, P. W., Platts, J. A. & Hibbs, D. E. (2012). J. Phys. Chem. A, 116, 3420–3427.  Web of Science CrossRef CAS PubMed Google Scholar
First citationOvergaard, J., Schiøtt, B., Larsen, F. K. & Iversen, B. B. (2001). Chem. Eur. J. pp. 3756–3767.  CrossRef Google Scholar
First citationPaul, A., Kubicki, M., Jelsch, C., Durand, P. & Lecomte, C. (2011). Acta Cryst. B67, 365–378.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationPodzorov, V. (2013). MRS Bull. 38, 15–24.  Web of Science CrossRef Google Scholar
First citationPodzorov, V., Menard, E., Borissov, A., Kiryukhin, V., Rogers, J. A. & Gershenson, M. E. (2004). Phys. Rev. Lett. pp. 93.  Google Scholar
First citationReese, C. & Bao, Z. N. (2007). Mater. Today, 10, 20–27.  Web of Science CrossRef CAS Google Scholar
First citationReineke, S., Thomschke, M., Lüssem, B. & Leo, K. (2013). Rev. Mod. Phys. 85, 1245–1293.  Web of Science CrossRef CAS Google Scholar
First citationReyes-Martinez, M. A., Ramasubramaniam, A., Briseno, A. L. & Crosby, A. J. (2012). Adv. Mater. 24, 5548–5552.  Web of Science CAS PubMed Google Scholar
First citationRigaku RAPID-AUTO Rigaku Corporation, T. & Japan (2004).  Google Scholar
First citationSaleh, G., Gatti, C., Lo Presti, L. & Contreras-García, J. (2012). Chem. Eur. J. 18, 15523–15536.  Web of Science CAS PubMed Google Scholar
First citationSaleh, G., Lo Presti, L., Gatti, C. & Ceresoli, D. (2013). J. Appl. Cryst. 46, 1513–1517.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationScherer, W., Eickerling, G., Shorokhov, D., Gullo, E., McGrady, G. S. & Sirsch, P. (2006). New J. Chem. 30, 309–312.  Web of Science CSD CrossRef CAS Google Scholar
First citationSchultz, A. J., Jørgensen, M. R. V., Wang, X., Mikkelson, R. L., Mikkelson, D. J., Lynch, V. E., Peterson, P. F., Green, M. L. & Hoffmann, C. M. (2014). J. Appl. Cryst. 47, 915–921.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSchultz, A. J., Srinivasan, K., Teller, R. G., Williams, J. M. & Lukehart, C. M. (1984). J. Am. Chem. Soc. 106, 999–1003.  CSD CrossRef CAS Web of Science Google Scholar
First citationSeferos, D. S., Trammell, S. A., Bazan, G. C. & Kushmerick, J. G. (2005). Proc. Natl Acad. Sci. USA, 102, 8821–8825.  Web of Science CrossRef PubMed CAS Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationShishkina, A. V., Zhurov, V. V., Stash, A. I., Vener, M. V., Pinkerton, A. A. & Tsirelson, V. G. (2013). Cryst. Growth Des. 13, 816–828.  Web of Science CSD CrossRef CAS Google Scholar
First citationSilva Filho, D. A. da, Kim, E. G. & Brédas, J.-L. (2005). Adv. Mater. 17, 1072–1076.  Google Scholar
First citationSinnokrot, M. O., Valeev, E. F. & Sherrill, C. D. (2002). J. Am. Chem. Soc. 124, 10887–10893.  Web of Science CrossRef PubMed CAS Google Scholar
First citationSirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P. & de Leeuw, D. M. (1999). Nature, 401, 685–688.  Web of Science CrossRef CAS Google Scholar
First citationSovago, I., Gutmann, M. J., Hill, J. G., Senn, H. M., Thomas, L. H., Wilson, C. C. & Farrugia, L. J. (2014). Cryst. Growth Des. 14, 1227–1239.  Web of Science CSD CrossRef CAS PubMed Google Scholar
First citationStehr, V., Pfister, J., Fink, R. F., Engels, B. & Deibel, C. (2011). Phys. Rev. B, pp. 83.  Google Scholar
First citationStrickler, S. J. & Berg, R. A. (1962). J. Chem. Phys. 37, 814–822.  CrossRef CAS Web of Science Google Scholar
First citationSu, Z. & Coppens, P. (1998). Acta Cryst. A54, 646–652.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSubramanian, V., Chang, P. C., Lee, J. B., Molesa, S. E. & Volkman, S. K. (2005). IEEE T Compon Pack T 28, 742–747.  Web of Science CrossRef CAS Google Scholar
First citationTakahashi, T., Takenobu, T., Takeya, J. & Iwasa, Y. (2006). Appl. Phys. Lett. pp. 88.  Google Scholar
First citationTaylor, J., Arnold, O., Biheaux, J., Buts, A., Campbel, S., Doucet, M., Draper, N., Fowler, R., Gigg, M., Lynch, V., Markvardsen, A., Palmen, K., Parker, P., Peterson, P., Ren, S., Reuter, M., Savici, A., Taylor, R., Tolchenov, R., Whitley, R., Zhou, W. & Zikovsky, J. (2012). Bull. Am. Phys. Soc. pp. 57.  Google Scholar
First citationToby, B. H. (2001). J. Appl. Cryst. 34, 210–213.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationVolkov, A., Koritsanszky, T. & Coppens, P. (2004). Chem. Phys. Lett. 391, 170–175.  Web of Science CrossRef CAS Google Scholar
First citationVolkov, A., Macchi, P., Farrugia, L. J., Gatti, C., Mallinson, P., Richter, T. & Koritsanszky, T. (2006). XD2006 - A Computer Program Package for Multipole Refinement, Topological Analysis of Charge Densities and Evaluation of Intermolecular Energies from Experimental and Theoretical Structure Factors.,.  Google Scholar
First citationWen, S. H., Li, A., Song, J. L., Deng, W. Q., Han, K. L. & Goddard, W. A. (2009). J. Phys. Chem. B, 113, 8813–8819.  Web of Science CrossRef PubMed CAS Google Scholar
First citationWilliams, D. E. & Cox, S. R. (1984). Acta Cryst. B40, 404–417.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationWolstenholme, D. J. & Cameron, T. S. (2006). J. Phys. Chem. A, 110, 8970–8978.  Web of Science CSD CrossRef PubMed CAS Google Scholar
First citationWolstenholme, D. J., Matta, C. F. & Cameron, T. S. (2007). J. Phys. Chem. A, 111, 8803–8813.  Web of Science CSD CrossRef PubMed CAS Google Scholar
First citationWu, S. M., González, M. T., Huber, R., Grunder, S., Mayor, M., Schönenberger, C. & Calame, M. (2008). Nature Nanotech, 3, 569–574.  Web of Science CrossRef CAS Google Scholar
First citationYamashita, Y. (2009). Sci. Technol. Adv. Mater. 10, 024313.  Web of Science CrossRef Google Scholar
First citationYassar, A. (2014). Polym. Sci. Ser. C. 56, 4–19.  Web of Science CrossRef CAS Google Scholar
First citationZhurova, E. A., Matta, C. F., Wu, N., Zhurov, V. V. & Pinkerton, A. A. (2006). J. Am. Chem. Soc. 128, 8849–8861.  Web of Science CSD CrossRef PubMed CAS Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

IUCrJ
Volume 2| Part 5| September 2015| Pages 563-574
ISSN: 2052-2525