view article
Figure 1
Particle-beam focusing as function of entrance pressure and particle diameter [reproduced from Hantke et al. (2018BB6)]. (a) Blue dots represent measured particle positions of injected polystyrene spheres (70 nm and 220 nm in diameter) at entrance pressures of 0.6 mbar and 1.8 mbar, respectively. Gaps are a result of combining the data from measurements at fixed injector distances without overlap of the fields of view. The positions of the focus planes are indicated by dotted red lines. (b) Measured particle-beam profiles (blue histograms) in the particle-focus plane were approximated by Gaussian functions (red lines). (c) The evolution of the particle-beam width (blue circles) was approximated with a Gaussian-beam model (black solid lines). The model is parameterized by a divergence angle θ, the beam waist (gray dashed lines) and the position of the focus plane (red dotted lines).

IUCrJ
Volume 5| Part 6| November 2018| Pages 663-666
ISSN: 2052-2525
https://doi.org/10.1107/S2052252518015129