view article
Figure 1
Experimental setup at the BioCARS beamline, 14-ID-B. (a) Schematic diagram of the setup. APS was operating in the 24-pulse mode. A Jülich chopper was used to choose the desired number of pulses. A Rayonix detector MX340HS was used to record crystal diffraction. (b) LCP injector (Weierstall et al., 2014BB68) mounted on translation stages. The catcher and beamstop are also shown. (c) Closer view of the red boxed area in (b) showing the LCP stream extruding out of a glass capillary with a 50 µm internal diameter, which was inserted into a ceramic injection-molded gas aperture nozzle.

IUCrJ
Volume 6| Part 3| May 2019| Pages 412-425
ISSN: 2052-2525
https://doi.org/10.1107/S205225251900263X