view article
Figure 2
The 3D-MiXD device on beamline ID30A-3 at the ESRF. Overview of the setup showing the chip mounted and aligned with the X-ray-interaction region. The alignment was performed using a high-precision XYZ motor stage (1). The 3D-MiXD was mounted on a specially designed 3D-printed holder (2; enlarged in the inset). The liquid flows were controlled using high-precision syringe pumps (3); the microcrystalline slurry sample was loaded onto a Teflon loop (4) and waste was collected from the outlet (5).

IUCrJ
Volume 7| Part 2| March 2020| Pages 207-219
ISSN: 2052-2525
https://doi.org/10.1107/S2052252519016865