Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
A sequence of two discontinuous phase transitions, occurring just above 125 K and 148 K, has been observed for a ferrocenyl–acetylide–gold(I) complex with triethylphosphine, structure (1), by means of a multi-temperature single-crystal X-ray diffraction technique. Three distinct phases have been identified. The high-temperature α and low-temperature γ phases share the same space group Pbca, whereas the intermediate β phase is in the Pb21a subgroup of Pbca. In all phases molecules of (1) form well defined double layers, with PEt3 groups interlocking in planes perpendicular to c. On the molecular level, both phase transitions involve almost uniquely a conformational change of triethylphosphine: a gear-like rotation around the P—Au axis and concerted flips of the ethyl moieties. The mechanism of these transitions may be imagined as initiated by a rotation of a single PEt3 group in a double layer (a single gear movement), followed by adjacent phosphines adjusting their conformations as a result of steric strain. The structural changes underlying phase transitions are sequential, occurring layer-wise, the γ→β transition involving approximately every other layer in the crystal lattice, the β→α yielding a total conformation change. The sequence of phase transitions results in a noticeable contraction of the crystal cell volume.

Supporting information

cif

Crystallographic Information File (CIF) https://doi.org/10.1107/S2052520618010399/um5013sup1.cif
Contains datablocks 1-110k, 1-125k, 1-140k, 1-200k

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S2052520618010399/um50131-110ksup2.hkl
Contains datablock 1-110k

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S2052520618010399/um50131-200ksup3.hkl
Contains datablock 1-200k

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S2052520618010399/um50131-125ksup4.hkl
Contains datablock 1-125k

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S2052520618010399/um50131-140ksup5.hkl
Contains datablock 1-140k

CCDC references: 1832102; 1832103; 1832104; 1832105

Computing details top

Data collection: APEX2 v2012.4-3 (Bruker AXS) for 1-125k, 1-140k, 1-200k. Cell refinement: SAINT v8.34A (Bruker, 2013) for 1-110k, 1-200k; APEX2 v2012.4-3 (Bruker AXS) for 1-125k, 1-140k. Data reduction: SAINT v8.34A (Bruker, 2013) for 1-110k, 1-200k; SAINT V8.18C (Bruker AXS Inc., 2011) for 1-125k, 1-140k. Program(s) used to solve structure: SHELXS97 (Sheldrick, 2008) for 1-125k, 1-140k; SHELXS (Sheldrick, 2008) for 1-200k. For all structures, program(s) used to refine structure: SHELXL (Sheldrick, 2015); molecular graphics: Olex2 (Dolomanov et al., 2009); software used to prepare material for publication: Olex2 (Dolomanov et al., 2009).

(1-110k) top
Crystal data top
C18H24AuFePDx = 1.952 Mg m3
Mr = 524.16Mo Kα radiation, λ = 0.71073 Å
Orthorhombic, PbcaCell parameters from 9928 reflections
a = 13.8822 (17) Åθ = 2.5–28.2°
b = 11.6188 (14) ŵ = 9.11 mm1
c = 22.115 (3) ÅT = 110 K
V = 3567.0 (8) Å3Block, clear reddish brown
Z = 80.22 × 0.17 × 0.12 mm
F(000) = 2016
Data collection top
Bruker APEX-II CCD
diffractometer
3930 reflections with I > 2σ(I)
φ and ω scansRint = 0.036
Absorption correction: multi-scan
SADABS-2012/1 (Bruker,2012) was used for absorption correction. wR2(int) was 0.1149 before and 0.0801 after correction. The Ratio of minimum to maximum transmission is 0.5166. The λ/2 correction factor is 0.0015.
θmax = 29.1°, θmin = 1.8°
Tmin = 0.285, Tmax = 0.552h = 1918
26682 measured reflectionsk = 1115
4788 independent reflectionsl = 3030
Refinement top
Refinement on F20 restraints
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.020H-atom parameters constrained
wR(F2) = 0.044 w = 1/[σ2(Fo2) + (0.0159P)2 + 3.7283P]
where P = (Fo2 + 2Fc2)/3
S = 1.01(Δ/σ)max = 0.001
4788 reflectionsΔρmax = 1.21 e Å3
193 parametersΔρmin = 0.67 e Å3
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Au10.41722 (2)0.27011 (2)0.34482 (2)0.01689 (4)
Fe10.31732 (3)0.15453 (3)0.49451 (2)0.01342 (8)
P10.42580 (5)0.44173 (6)0.29546 (3)0.01698 (14)
C10.39673 (18)0.0992 (2)0.42235 (12)0.0160 (5)
C20.45678 (19)0.1550 (2)0.46636 (12)0.0176 (5)
H20.50990.12110.48680.021*
C30.4231 (2)0.2698 (2)0.47417 (13)0.0215 (6)
H30.44980.32580.50060.026*
C40.3423 (2)0.2857 (2)0.43533 (13)0.0224 (6)
H40.30560.35420.43140.027*
C50.3262 (2)0.1817 (2)0.40351 (12)0.0197 (6)
H50.27690.16880.37450.024*
C60.26888 (19)0.0100 (2)0.53648 (13)0.0208 (6)
H60.28500.06680.52580.025*
C70.3198 (2)0.0806 (3)0.57786 (12)0.0224 (6)
H70.37570.05950.60000.027*
C80.2721 (2)0.1885 (3)0.58017 (13)0.0246 (6)
H80.29090.25260.60410.029*
C90.1922 (2)0.1843 (3)0.54102 (14)0.0243 (6)
H90.14760.24490.53400.029*
C100.1901 (2)0.0735 (2)0.51398 (14)0.0224 (6)
H100.14380.04680.48570.027*
C110.40337 (19)0.0179 (3)0.40202 (11)0.0177 (6)
C120.40885 (19)0.1144 (3)0.38307 (12)0.0192 (6)
C130.5163 (2)0.5406 (3)0.32452 (15)0.0294 (7)
H13A0.52310.60620.29630.035*
H13B0.49460.57130.36400.035*
C140.6133 (2)0.4833 (4)0.33244 (17)0.0419 (9)
H14A0.60730.41930.36110.063*
H14B0.65970.53940.34810.063*
H14C0.63570.45400.29330.063*
C150.3140 (2)0.5230 (3)0.29539 (13)0.0246 (6)
H15A0.26300.47420.27750.030*
H15B0.29560.53850.33790.030*
C160.3156 (3)0.6375 (3)0.26136 (15)0.0354 (8)
H16A0.36610.68700.27820.053*
H16B0.25300.67570.26560.053*
H16C0.32880.62340.21850.053*
C170.4580 (2)0.4218 (3)0.21635 (12)0.0209 (6)
H17A0.46430.49830.19700.025*
H17B0.52160.38340.21420.025*
C180.3853 (2)0.3508 (3)0.18085 (13)0.0245 (6)
H18A0.37340.27810.20200.037*
H18B0.41090.33490.14040.037*
H18C0.32490.39380.17730.037*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Au10.01714 (5)0.01655 (6)0.01698 (5)0.00181 (4)0.00040 (4)0.00325 (4)
Fe10.01328 (17)0.01105 (18)0.01592 (17)0.00005 (14)0.00065 (14)0.00001 (15)
P10.0179 (3)0.0156 (4)0.0174 (3)0.0036 (3)0.0023 (3)0.0018 (3)
C10.0158 (13)0.0171 (14)0.0150 (12)0.0016 (10)0.0030 (10)0.0018 (11)
C20.0142 (12)0.0204 (15)0.0183 (13)0.0053 (11)0.0022 (10)0.0010 (11)
C30.0262 (15)0.0163 (14)0.0220 (13)0.0081 (12)0.0033 (11)0.0012 (11)
C40.0332 (16)0.0122 (15)0.0218 (14)0.0009 (12)0.0018 (12)0.0056 (11)
C50.0248 (15)0.0183 (15)0.0161 (12)0.0013 (12)0.0020 (10)0.0011 (11)
C60.0223 (14)0.0130 (14)0.0273 (14)0.0002 (11)0.0103 (11)0.0009 (12)
C70.0228 (14)0.0270 (17)0.0172 (13)0.0002 (12)0.0062 (11)0.0066 (12)
C80.0282 (16)0.0220 (15)0.0236 (14)0.0066 (12)0.0108 (12)0.0066 (13)
C90.0174 (14)0.0171 (15)0.0385 (17)0.0008 (11)0.0088 (12)0.0010 (13)
C100.0176 (13)0.0165 (14)0.0330 (16)0.0056 (11)0.0043 (12)0.0033 (13)
C110.0174 (13)0.0227 (15)0.0128 (12)0.0009 (11)0.0027 (10)0.0003 (11)
C120.0160 (13)0.0213 (15)0.0205 (13)0.0017 (11)0.0014 (11)0.0009 (12)
C130.0290 (16)0.0253 (17)0.0339 (16)0.0090 (13)0.0087 (13)0.0002 (14)
C140.0232 (16)0.052 (3)0.050 (2)0.0096 (16)0.0070 (15)0.0072 (19)
C150.0268 (15)0.0257 (17)0.0212 (14)0.0049 (13)0.0007 (12)0.0024 (13)
C160.048 (2)0.0253 (18)0.0329 (17)0.0163 (15)0.0012 (15)0.0039 (14)
C170.0208 (14)0.0216 (16)0.0204 (13)0.0014 (12)0.0038 (11)0.0036 (12)
C180.0298 (15)0.0247 (17)0.0189 (13)0.0010 (13)0.0010 (12)0.0019 (13)
Geometric parameters (Å, º) top
Au1—P12.2764 (8)C6—C101.410 (4)
Au1—C122.000 (3)C7—H70.9500
Fe1—C12.043 (3)C7—C81.419 (4)
Fe1—C22.034 (3)C8—H80.9500
Fe1—C32.038 (3)C8—C91.409 (4)
Fe1—C42.038 (3)C9—H90.9500
Fe1—C52.041 (3)C9—C101.420 (4)
Fe1—C62.033 (3)C10—H100.9500
Fe1—C72.034 (3)C11—C121.200 (4)
Fe1—C82.034 (3)C13—H13A0.9900
Fe1—C92.049 (3)C13—H13B0.9900
Fe1—C102.047 (3)C13—C141.512 (5)
P1—C131.820 (3)C14—H14A0.9800
P1—C151.817 (3)C14—H14B0.9800
P1—C171.821 (3)C14—H14C0.9800
C1—C21.436 (4)C15—H15A0.9900
C1—C51.432 (4)C15—H15B0.9900
C1—C111.435 (4)C15—C161.528 (4)
C2—H20.9500C16—H16A0.9800
C2—C31.424 (4)C16—H16B0.9800
C3—H30.9500C16—H16C0.9800
C3—C41.424 (4)C17—H17A0.9900
C4—H40.9500C17—H17B0.9900
C4—C51.416 (4)C17—C181.521 (4)
C5—H50.9500C18—H18A0.9800
C6—H60.9500C18—H18B0.9800
C6—C71.418 (4)C18—H18C0.9800
C12—Au1—P1176.35 (8)C5—C4—H4125.9
C1—Fe1—C9154.54 (12)Fe1—C5—H5126.7
C1—Fe1—C10119.01 (11)C1—C5—Fe169.57 (15)
C2—Fe1—C141.24 (10)C1—C5—H5125.7
C2—Fe1—C340.95 (11)C4—C5—Fe169.60 (16)
C2—Fe1—C468.86 (12)C4—C5—C1108.6 (2)
C2—Fe1—C568.92 (11)C4—C5—H5125.7
C2—Fe1—C7105.20 (11)Fe1—C6—H6125.7
C2—Fe1—C8125.32 (12)C7—C6—Fe169.62 (16)
C2—Fe1—C9163.88 (12)C7—C6—H6125.9
C2—Fe1—C10152.47 (12)C10—C6—Fe170.29 (16)
C3—Fe1—C169.24 (11)C10—C6—H6125.9
C3—Fe1—C440.91 (12)C10—C6—C7108.1 (3)
C3—Fe1—C568.73 (12)Fe1—C7—H7126.2
C3—Fe1—C9127.66 (12)C6—C7—Fe169.58 (16)
C3—Fe1—C10166.03 (12)C6—C7—H7126.2
C4—Fe1—C169.01 (11)C6—C7—C8107.6 (3)
C4—Fe1—C540.62 (12)C8—C7—Fe169.60 (16)
C4—Fe1—C9109.92 (12)C8—C7—H7126.2
C4—Fe1—C10128.75 (12)Fe1—C8—H8125.8
C5—Fe1—C141.06 (11)C7—C8—Fe169.58 (16)
C5—Fe1—C9121.35 (12)C7—C8—H8125.8
C5—Fe1—C10109.31 (12)C9—C8—Fe170.37 (17)
C6—Fe1—C1105.96 (11)C9—C8—C7108.4 (3)
C6—Fe1—C2117.16 (11)C9—C8—H8125.8
C6—Fe1—C3151.88 (12)Fe1—C9—H9126.6
C6—Fe1—C4165.20 (12)C8—C9—Fe169.27 (16)
C6—Fe1—C5126.71 (12)C8—C9—H9126.1
C6—Fe1—C740.80 (12)C8—C9—C10107.8 (3)
C6—Fe1—C868.48 (12)C10—C9—Fe169.64 (16)
C6—Fe1—C968.28 (11)C10—C9—H9126.1
C6—Fe1—C1040.43 (11)Fe1—C10—H10126.6
C7—Fe1—C1124.44 (12)C6—C10—Fe169.28 (16)
C7—Fe1—C3117.73 (12)C6—C10—C9108.1 (3)
C7—Fe1—C4153.47 (12)C6—C10—H10125.9
C7—Fe1—C5163.32 (12)C9—C10—Fe169.79 (16)
C7—Fe1—C840.82 (12)C9—C10—H10125.9
C7—Fe1—C968.33 (12)C12—C11—C1177.8 (3)
C7—Fe1—C1068.27 (12)C11—C12—Au1175.4 (3)
C8—Fe1—C1162.69 (12)P1—C13—H13A109.2
C8—Fe1—C3107.48 (12)P1—C13—H13B109.2
C8—Fe1—C4120.37 (12)H13A—C13—H13B107.9
C8—Fe1—C5155.10 (12)C14—C13—P1112.2 (2)
C8—Fe1—C940.36 (12)C14—C13—H13A109.2
C8—Fe1—C1068.11 (12)C14—C13—H13B109.2
C10—Fe1—C940.58 (11)C13—C14—H14A109.5
C13—P1—Au1114.81 (11)C13—C14—H14B109.5
C13—P1—C17104.49 (14)C13—C14—H14C109.5
C15—P1—Au1114.28 (10)H14A—C14—H14B109.5
C15—P1—C13105.20 (15)H14A—C14—H14C109.5
C15—P1—C17105.96 (13)H14B—C14—H14C109.5
C17—P1—Au1111.23 (10)P1—C15—H15A108.3
C2—C1—Fe169.01 (15)P1—C15—H15B108.3
C5—C1—Fe169.37 (15)H15A—C15—H15B107.4
C5—C1—C2107.0 (2)C16—C15—P1116.1 (2)
C5—C1—C11125.9 (2)C16—C15—H15A108.3
C11—C1—Fe1125.26 (19)C16—C15—H15B108.3
C11—C1—C2127.1 (2)C15—C16—H16A109.5
Fe1—C2—H2126.3C15—C16—H16B109.5
C1—C2—Fe169.74 (15)C15—C16—H16C109.5
C1—C2—H2125.8H16A—C16—H16B109.5
C3—C2—Fe169.68 (15)H16A—C16—H16C109.5
C3—C2—C1108.3 (2)H16B—C16—H16C109.5
C3—C2—H2125.8P1—C17—H17A108.8
Fe1—C3—H3126.6P1—C17—H17B108.8
C2—C3—Fe169.37 (15)H17A—C17—H17B107.7
C2—C3—H3126.1C18—C17—P1113.73 (19)
C4—C3—Fe169.57 (16)C18—C17—H17A108.8
C4—C3—C2107.8 (2)C18—C17—H17B108.8
C4—C3—H3126.1C17—C18—H18A109.5
Fe1—C4—H4126.4C17—C18—H18B109.5
C3—C4—Fe169.52 (16)C17—C18—H18C109.5
C3—C4—H4125.9H18A—C18—H18B109.5
C5—C4—Fe169.78 (16)H18A—C18—H18C109.5
C5—C4—C3108.3 (3)H18B—C18—H18C109.5
Au1—P1—C13—C1448.8 (3)C5—C1—C2—C30.0 (3)
Au1—P1—C15—C16178.5 (2)C6—C7—C8—Fe159.45 (19)
Au1—P1—C17—C1861.5 (2)C6—C7—C8—C90.4 (3)
Fe1—C1—C2—C359.19 (18)C7—C6—C10—Fe159.55 (19)
Fe1—C1—C5—C458.84 (19)C7—C6—C10—C90.4 (3)
Fe1—C2—C3—C459.13 (19)C7—C8—C9—Fe159.41 (19)
Fe1—C3—C4—C559.20 (19)C7—C8—C9—C100.2 (3)
Fe1—C4—C5—C158.82 (19)C8—C9—C10—Fe159.0 (2)
Fe1—C6—C7—C859.47 (19)C8—C9—C10—C60.1 (3)
Fe1—C6—C10—C959.2 (2)C10—C6—C7—Fe160.0 (2)
Fe1—C7—C8—C959.9 (2)C10—C6—C7—C80.5 (3)
Fe1—C8—C9—C1059.2 (2)C11—C1—C2—Fe1119.0 (3)
Fe1—C9—C10—C658.87 (19)C11—C1—C2—C3178.2 (2)
C1—C2—C3—Fe159.23 (18)C11—C1—C5—Fe1119.3 (3)
C1—C2—C3—C40.1 (3)C11—C1—C5—C4178.1 (3)
C2—C1—C5—Fe159.00 (18)C13—P1—C15—C1654.7 (3)
C2—C1—C5—C40.2 (3)C13—P1—C17—C18174.1 (2)
C2—C3—C4—Fe159.01 (18)C15—P1—C13—C14175.3 (2)
C2—C3—C4—C50.2 (3)C15—P1—C17—C1863.3 (2)
C3—C4—C5—Fe159.04 (19)C17—P1—C13—C1473.3 (3)
C3—C4—C5—C10.2 (3)C17—P1—C15—C1655.7 (3)
C5—C1—C2—Fe159.23 (18)
(1-125k) top
Crystal data top
C18H24AuFePDx = 1.950 Mg m3
Mr = 524.16Mo Kα radiation, λ = 0.71073 Å
Orthorhombic, PbcaCell parameters from 9928 reflections
a = 13.8732 (18) Åθ = 2.5–28.2°
b = 11.6316 (15) ŵ = 9.10 mm1
c = 22.124 (3) ÅT = 125 K
V = 3570.0 (8) Å3Block, clear reddish brown
Z = 80.22 × 0.17 × 0.12 mm
F(000) = 2016
Data collection top
Bruker kappa APEX2 area detector
diffractometer
4687 independent reflections
Radiation source: rotating anode X-ray tube, Bruker TXS3902 reflections with I > 2σ(I)
Mirror optics monochromatorRint = 0.046
Detector resolution: 7.9 pixels mm-1θmax = 28.9°, θmin = 1.8°
ω and φ scansh = 1817
Absorption correction: multi-scan
SADABS V2008/1 (Bruker AXS Inc.)
k = 1115
Tmin = 0.303, Tmax = 0.552l = 3029
26121 measured reflections
Refinement top
Refinement on F20 restraints
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.042H-atom parameters constrained
wR(F2) = 0.084 w = 1/[σ2(Fo2) + 34.2581P]
where P = (Fo2 + 2Fc2)/3
S = 1.26(Δ/σ)max = 0.001
4687 reflectionsΔρmax = 2.32 e Å3
193 parametersΔρmin = 3.23 e Å3
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Au10.41732 (2)0.27016 (2)0.34450 (2)0.01974 (7)
Fe10.31733 (6)0.15398 (7)0.49401 (4)0.01480 (17)
P10.42632 (13)0.44146 (14)0.29514 (7)0.0204 (3)
C10.3966 (4)0.0982 (5)0.4219 (3)0.0186 (13)
C20.4562 (5)0.1545 (6)0.4662 (3)0.0206 (13)
H20.50890.12040.48700.025*
C30.4237 (5)0.2685 (6)0.4738 (3)0.0257 (14)
H30.45080.32430.50020.031*
C40.3426 (5)0.2851 (6)0.4348 (3)0.0257 (14)
H40.30600.35370.43080.031*
C50.3269 (5)0.1810 (6)0.4030 (3)0.0243 (14)
H50.27780.16840.37390.029*
C60.2688 (5)0.0095 (6)0.5360 (3)0.0231 (14)
H60.28470.06730.52540.028*
C70.3197 (5)0.0800 (6)0.5772 (3)0.0250 (14)
H70.37570.05900.59930.030*
C80.2719 (5)0.1878 (6)0.5796 (3)0.0281 (15)
H80.29060.25170.60370.034*
C90.1922 (5)0.1842 (6)0.5404 (3)0.0286 (16)
H90.14790.24520.53340.034*
C100.1892 (5)0.0744 (6)0.5131 (3)0.0273 (15)
H100.14270.04840.48470.033*
C110.4030 (4)0.0184 (6)0.4018 (3)0.0196 (13)
C120.4090 (5)0.1155 (6)0.3828 (3)0.0220 (13)
C130.5165 (6)0.5400 (7)0.3245 (4)0.0360 (18)
H13A0.52290.60600.29660.043*
H13B0.49480.56990.36410.043*
C140.6134 (6)0.4835 (9)0.3320 (4)0.050 (2)
H14A0.60820.42040.36110.075*
H14B0.66010.54010.34670.075*
H14C0.63500.45310.29290.075*
C150.3142 (5)0.5228 (6)0.2950 (3)0.0293 (15)
H15A0.26330.47430.27680.035*
H15B0.29550.53790.33750.035*
C160.3166 (7)0.6371 (7)0.2614 (4)0.042 (2)
H16A0.36450.68780.28010.063*
H16B0.25290.67330.26330.063*
H16C0.33400.62360.21900.063*
C170.4580 (5)0.4211 (6)0.2165 (3)0.0243 (14)
H17A0.46460.49740.19710.029*
H17B0.52140.38240.21430.029*
C180.3852 (5)0.3507 (6)0.1810 (3)0.0279 (15)
H18A0.37390.27740.20170.042*
H18B0.41030.33590.14030.042*
H18C0.32450.39330.17800.042*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Au10.02044 (12)0.01888 (11)0.01991 (11)0.00158 (10)0.00027 (10)0.00409 (9)
Fe10.0137 (4)0.0121 (4)0.0187 (4)0.0004 (3)0.0006 (3)0.0003 (3)
P10.0220 (8)0.0180 (8)0.0211 (7)0.0040 (7)0.0031 (7)0.0022 (6)
C10.017 (3)0.020 (3)0.019 (3)0.004 (2)0.005 (2)0.000 (2)
C20.019 (3)0.020 (3)0.023 (3)0.005 (2)0.001 (2)0.001 (3)
C30.031 (3)0.020 (3)0.027 (3)0.013 (3)0.007 (3)0.001 (3)
C40.038 (4)0.015 (3)0.024 (3)0.001 (3)0.002 (3)0.006 (3)
C50.029 (4)0.023 (3)0.020 (3)0.001 (3)0.002 (3)0.003 (3)
C60.022 (4)0.016 (3)0.032 (3)0.001 (3)0.010 (3)0.002 (3)
C70.029 (4)0.025 (3)0.021 (3)0.001 (3)0.006 (3)0.010 (3)
C80.032 (4)0.024 (3)0.028 (3)0.007 (3)0.012 (3)0.010 (3)
C90.019 (3)0.019 (3)0.048 (4)0.002 (3)0.013 (3)0.001 (3)
C100.022 (3)0.017 (3)0.044 (4)0.008 (3)0.007 (3)0.002 (3)
C110.016 (3)0.026 (3)0.016 (3)0.003 (3)0.003 (2)0.000 (2)
C120.017 (3)0.029 (3)0.019 (3)0.001 (3)0.003 (3)0.000 (3)
C130.034 (4)0.033 (4)0.041 (4)0.010 (3)0.012 (3)0.000 (3)
C140.030 (4)0.059 (6)0.062 (6)0.009 (4)0.008 (4)0.007 (5)
C150.032 (4)0.028 (4)0.028 (3)0.004 (3)0.000 (3)0.004 (3)
C160.054 (6)0.031 (4)0.039 (4)0.017 (4)0.000 (4)0.004 (3)
C170.022 (3)0.026 (4)0.024 (3)0.001 (3)0.006 (3)0.004 (3)
C180.036 (4)0.023 (3)0.024 (3)0.002 (3)0.004 (3)0.003 (3)
Geometric parameters (Å, º) top
Au1—P12.2756 (16)C1—C21.441 (9)
Au1—C121.992 (7)C1—C51.427 (9)
Fe1—C12.044 (6)C1—C111.430 (9)
Fe1—C22.023 (6)C2—C31.410 (10)
Fe1—C32.038 (6)C3—C41.432 (10)
Fe1—C42.041 (6)C4—C51.416 (9)
Fe1—C52.041 (6)C6—C71.416 (10)
Fe1—C62.035 (6)C6—C101.430 (10)
Fe1—C72.033 (6)C7—C81.419 (10)
Fe1—C82.035 (6)C8—C91.407 (10)
Fe1—C92.047 (7)C9—C101.413 (10)
Fe1—C102.048 (7)C11—C121.208 (9)
P1—C131.817 (8)C13—C141.506 (12)
P1—C151.820 (7)C15—C161.524 (10)
P1—C171.810 (7)C17—C181.519 (10)
C12—Au1—P1176.49 (19)C9—Fe1—C1040.4 (3)
C1—Fe1—C9154.5 (3)C13—P1—Au1114.7 (3)
C1—Fe1—C10119.0 (3)C13—P1—C15105.1 (4)
C2—Fe1—C141.5 (2)C15—P1—Au1114.1 (3)
C2—Fe1—C340.6 (3)C17—P1—Au1111.1 (2)
C2—Fe1—C468.8 (3)C17—P1—C13105.0 (4)
C2—Fe1—C568.8 (3)C17—P1—C15105.9 (3)
C2—Fe1—C6117.2 (3)C2—C1—Fe168.5 (4)
C2—Fe1—C7105.2 (3)C5—C1—Fe169.5 (4)
C2—Fe1—C8125.3 (3)C5—C1—C2106.3 (6)
C2—Fe1—C9163.7 (3)C5—C1—C11126.2 (6)
C2—Fe1—C10153.0 (3)C11—C1—Fe1125.2 (4)
C3—Fe1—C169.3 (3)C11—C1—C2127.4 (6)
C3—Fe1—C441.1 (3)C1—C2—Fe170.0 (4)
C3—Fe1—C568.7 (3)C3—C2—Fe170.2 (4)
C3—Fe1—C9127.7 (3)C3—C2—C1109.0 (6)
C3—Fe1—C10165.8 (3)C2—C3—Fe169.1 (4)
C4—Fe1—C169.1 (3)C2—C3—C4107.8 (6)
C4—Fe1—C9109.8 (3)C4—C3—Fe169.6 (4)
C4—Fe1—C10128.3 (3)C3—C4—Fe169.3 (4)
C5—Fe1—C140.9 (3)C5—C4—Fe169.7 (4)
C5—Fe1—C440.6 (3)C5—C4—C3107.7 (6)
C5—Fe1—C9121.5 (3)C1—C5—Fe169.6 (3)
C5—Fe1—C10109.2 (3)C4—C5—Fe169.7 (4)
C6—Fe1—C1105.8 (3)C4—C5—C1109.1 (6)
C6—Fe1—C3151.6 (3)C7—C6—Fe169.6 (4)
C6—Fe1—C4165.2 (3)C7—C6—C10107.9 (6)
C6—Fe1—C5126.8 (3)C10—C6—Fe170.0 (4)
C6—Fe1—C868.4 (3)C6—C7—Fe169.7 (4)
C6—Fe1—C968.4 (3)C6—C7—C8107.6 (6)
C6—Fe1—C1041.0 (3)C8—C7—Fe169.7 (4)
C7—Fe1—C1124.4 (3)C7—C8—Fe169.5 (4)
C7—Fe1—C3117.6 (3)C9—C8—Fe170.3 (4)
C7—Fe1—C4153.5 (3)C9—C8—C7108.5 (6)
C7—Fe1—C5163.2 (3)C8—C9—Fe169.4 (4)
C7—Fe1—C640.7 (3)C8—C9—C10108.3 (6)
C7—Fe1—C840.8 (3)C10—C9—Fe169.9 (4)
C7—Fe1—C968.4 (3)C6—C10—Fe169.0 (4)
C7—Fe1—C1068.6 (3)C9—C10—Fe169.8 (4)
C8—Fe1—C1162.7 (3)C9—C10—C6107.7 (6)
C8—Fe1—C3107.6 (3)C12—C11—C1177.7 (7)
C8—Fe1—C4120.4 (3)C11—C12—Au1175.2 (6)
C8—Fe1—C5155.2 (3)C14—C13—P1112.3 (6)
C8—Fe1—C940.3 (3)C16—C15—P1115.8 (6)
C8—Fe1—C1068.1 (3)C18—C17—P1114.0 (5)
(1-140k) top
Crystal data top
C18H24AuFePDx = 1.963 Mg m3
Mr = 524.16Mo Kα radiation, λ = 0.71073 Å
Orthorhombic, Pb21aCell parameters from 9928 reflections
a = 13.872 (18) Åθ = 2.5–28.2°
b = 11.644 (16) ŵ = 9.16 mm1
c = 21.96 (3) ÅT = 140 K
V = 3548 (8) Å3Block, clear reddish brown
Z = 80.22 × 0.17 × 0.12 mm
F(000) = 2016
Data collection top
Bruker kappa APEX2 area detector
diffractometer
7862 independent reflections
Radiation source: rotating anode X-ray tube, Bruker TXS7010 reflections with I > 2σ(I)
Mirror optics monochromatorRint = 0.066
Detector resolution: 7.9 pixels mm-1θmax = 28.3°, θmin = 0.9°
ω and φ scansh = 1817
Absorption correction: multi-scan
SADABS V2008/1 (Bruker AXS Inc.)
k = 1115
Tmin = 0.285, Tmax = 0.552l = 2929
23957 measured reflections
Refinement top
Refinement on F2Hydrogen site location: inferred from neighbouring sites
Least-squares matrix: fullH-atom parameters constrained
R[F2 > 2σ(F2)] = 0.086 w = 1/[σ2(Fo2) + (0.0001P)2 + 360.9662P]
where P = (Fo2 + 2Fc2)/3
wR(F2) = 0.214(Δ/σ)max = 0.001
S = 1.13Δρmax = 8.55 e Å3
7862 reflectionsΔρmin = 6.76 e Å3
386 parametersAbsolute structure: Refined as an inversion twin.
493 restraintsAbsolute structure parameter: 0.45 (3)
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Au10.44740 (7)0.76617 (11)0.40498 (5)0.0174 (3)
Fe10.3089 (3)0.3430 (4)0.2620 (2)0.0171 (8)
P10.4994 (5)0.9310 (7)0.4501 (3)0.0154 (13)
C10.386 (2)0.399 (3)0.3355 (14)0.020 (3)
C20.311 (2)0.325 (3)0.3549 (15)0.021 (3)
H20.26030.34450.38190.026*
C30.327 (2)0.213 (3)0.3255 (13)0.021 (3)
H30.28930.14590.33100.025*
C40.411 (2)0.225 (3)0.2865 (14)0.020 (3)
H40.43640.16790.26040.024*
C50.446 (2)0.336 (3)0.2944 (14)0.021 (3)
H50.50210.36590.27510.025*
C60.262 (2)0.481 (3)0.2173 (14)0.022 (3)
H60.28040.55710.22830.027*
C70.184 (2)0.431 (3)0.2378 (15)0.022 (3)
H70.13660.46350.26380.027*
C80.183 (2)0.315 (3)0.2129 (15)0.022 (3)
H80.13710.25650.22020.026*
C90.270 (2)0.307 (3)0.1744 (15)0.022 (3)
H90.28840.24160.15150.026*
C100.319 (2)0.410 (3)0.1767 (15)0.022 (3)
H100.37660.43020.15610.027*
C110.400 (2)0.514 (3)0.3554 (17)0.024 (4)
C120.413 (2)0.610 (3)0.3764 (17)0.024 (4)
C130.416 (2)0.996 (3)0.5049 (14)0.021 (4)
H13A0.39190.93540.53280.025*
H13B0.45131.05320.52970.025*
C140.328 (2)1.056 (3)0.4723 (16)0.023 (6)
H14A0.30921.01080.43650.034*
H14B0.34671.13330.45950.034*
H14C0.27361.06060.50060.034*
C150.534 (2)1.044 (3)0.3981 (14)0.018 (4)
H15A0.58661.01470.37170.021*
H15B0.47861.06190.37160.021*
C160.569 (3)1.157 (3)0.4268 (16)0.026 (6)
H16A0.58001.21360.39470.040*
H16B0.62911.14290.44900.040*
H16C0.51971.18520.45500.040*
C170.606 (2)0.904 (3)0.4966 (15)0.021 (4)
H17A0.62930.97850.51310.025*
H17B0.58760.85520.53140.025*
C180.689 (2)0.846 (3)0.4614 (17)0.026 (6)
H18A0.71300.89830.42990.039*
H18B0.66530.77540.44230.039*
H18C0.74130.82730.48960.039*
Au20.58322 (10)0.20278 (11)0.09390 (5)0.0256 (3)
Fe20.6901 (3)0.6280 (4)0.2405 (2)0.0188 (9)
P20.5757 (6)0.0362 (8)0.0423 (4)0.0224 (16)
C210.601 (2)0.566 (3)0.1724 (14)0.022 (3)
C220.548 (2)0.622 (3)0.2205 (14)0.022 (3)
H220.49920.58770.24470.026*
C230.580 (2)0.739 (3)0.2256 (15)0.023 (3)
H230.55580.79610.25270.027*
C240.654 (2)0.753 (3)0.1827 (14)0.024 (3)
H240.69190.82510.17710.029*
C250.669 (2)0.655 (3)0.1501 (15)0.023 (3)
H250.71490.64560.11850.027*
C260.754 (3)0.484 (3)0.2807 (15)0.025 (3)
H260.74260.40540.27230.030*
C270.707 (3)0.557 (3)0.3255 (16)0.026 (3)
H270.65780.53390.35270.032*
C280.749 (3)0.673 (3)0.3220 (15)0.026 (3)
H280.73050.73800.34550.031*
C290.823 (3)0.668 (3)0.2755 (15)0.025 (3)
H290.86440.72950.26440.030*
C300.823 (2)0.565 (3)0.2512 (15)0.025 (3)
H300.86510.54240.21630.030*
C310.595 (2)0.449 (3)0.1542 (13)0.018 (4)
C320.590 (2)0.353 (3)0.1352 (12)0.017 (4)
C330.479 (3)0.057 (3)0.0699 (17)0.029 (5)
H33A0.46760.11780.03920.035*
H33B0.50110.09510.10770.035*
C340.387 (3)0.001 (4)0.083 (2)0.043 (10)
H34A0.36460.04140.04580.065*
H34B0.39540.05710.11550.065*
H34C0.33820.05550.09460.065*
C350.686 (3)0.047 (3)0.0405 (16)0.026 (4)
H35A0.73740.00080.02100.031*
H35B0.70680.06300.08290.031*
C360.678 (3)0.157 (4)0.008 (2)0.041 (9)
H36A0.73250.20650.01790.062*
H36B0.67670.14280.03620.062*
H36C0.61750.19550.01970.062*
C370.539 (3)0.057 (3)0.0382 (14)0.025 (4)
H37A0.53320.01890.05840.030*
H37B0.47570.09530.03990.030*
C380.614 (3)0.130 (4)0.0718 (17)0.036 (8)
H38A0.58510.16330.10840.053*
H38B0.66910.08140.08360.053*
H38C0.63690.19140.04500.053*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Au10.0125 (4)0.0207 (6)0.0189 (5)0.0017 (5)0.0032 (4)0.0032 (7)
Fe10.0191 (18)0.014 (2)0.0180 (19)0.0001 (15)0.0018 (15)0.0009 (17)
P10.014 (3)0.016 (3)0.016 (3)0.002 (2)0.000 (2)0.002 (2)
C10.021 (5)0.020 (4)0.020 (5)0.001 (3)0.004 (4)0.000 (3)
C20.022 (6)0.021 (5)0.021 (4)0.002 (4)0.003 (4)0.000 (3)
C30.021 (6)0.019 (5)0.022 (5)0.001 (4)0.004 (4)0.001 (4)
C40.020 (5)0.018 (5)0.021 (6)0.001 (4)0.004 (4)0.001 (4)
C50.022 (4)0.019 (5)0.021 (5)0.001 (3)0.003 (4)0.001 (4)
C60.025 (5)0.019 (5)0.023 (5)0.000 (4)0.006 (4)0.001 (4)
C70.024 (5)0.018 (6)0.025 (6)0.001 (4)0.006 (4)0.001 (4)
C80.023 (5)0.018 (6)0.024 (6)0.001 (4)0.006 (4)0.001 (4)
C90.024 (6)0.019 (6)0.022 (4)0.001 (4)0.006 (4)0.001 (4)
C100.026 (6)0.020 (6)0.021 (4)0.000 (4)0.005 (4)0.000 (4)
C110.015 (8)0.022 (4)0.035 (9)0.001 (4)0.001 (7)0.006 (5)
C120.013 (8)0.022 (4)0.038 (10)0.001 (5)0.001 (7)0.008 (5)
C130.020 (6)0.020 (9)0.022 (7)0.001 (6)0.003 (5)0.003 (6)
C140.019 (7)0.016 (12)0.033 (12)0.002 (8)0.001 (7)0.001 (10)
C150.015 (9)0.016 (6)0.022 (7)0.000 (5)0.001 (6)0.001 (5)
C160.034 (16)0.017 (7)0.028 (12)0.005 (8)0.006 (11)0.000 (7)
C170.018 (5)0.019 (9)0.025 (7)0.001 (5)0.005 (5)0.001 (6)
C180.021 (7)0.017 (14)0.041 (13)0.003 (8)0.000 (7)0.005 (11)
Au20.0424 (8)0.0175 (6)0.0167 (5)0.0084 (6)0.0035 (5)0.0039 (7)
Fe20.024 (2)0.017 (2)0.0160 (19)0.0004 (16)0.0033 (15)0.0018 (17)
P20.031 (4)0.015 (3)0.021 (3)0.003 (3)0.002 (3)0.005 (3)
C210.028 (5)0.018 (4)0.019 (5)0.001 (4)0.005 (4)0.001 (3)
C220.027 (4)0.019 (5)0.019 (5)0.000 (3)0.005 (4)0.001 (4)
C230.028 (5)0.019 (5)0.022 (6)0.000 (4)0.006 (4)0.001 (4)
C240.029 (6)0.020 (5)0.022 (5)0.000 (4)0.006 (4)0.003 (4)
C250.028 (6)0.020 (5)0.021 (4)0.000 (4)0.006 (4)0.003 (3)
C260.030 (6)0.021 (5)0.024 (6)0.000 (4)0.008 (5)0.003 (4)
C270.033 (6)0.023 (6)0.023 (5)0.001 (4)0.008 (4)0.003 (4)
C280.032 (6)0.023 (6)0.023 (5)0.001 (4)0.009 (4)0.002 (4)
C290.030 (5)0.021 (6)0.025 (6)0.001 (4)0.009 (4)0.002 (4)
C300.029 (5)0.020 (6)0.025 (6)0.001 (4)0.007 (4)0.002 (4)
C310.028 (9)0.017 (4)0.010 (7)0.002 (4)0.005 (6)0.003 (4)
C320.028 (9)0.017 (4)0.008 (7)0.003 (4)0.006 (7)0.003 (4)
C330.038 (7)0.023 (8)0.027 (10)0.004 (6)0.004 (6)0.004 (7)
C340.041 (8)0.025 (14)0.06 (3)0.002 (8)0.018 (10)0.007 (14)
C350.036 (6)0.017 (8)0.024 (10)0.002 (5)0.006 (6)0.002 (7)
C360.052 (15)0.024 (9)0.048 (19)0.005 (9)0.001 (13)0.011 (11)
C370.042 (10)0.013 (10)0.020 (5)0.005 (7)0.003 (5)0.005 (5)
C380.050 (14)0.033 (16)0.024 (9)0.005 (13)0.001 (8)0.003 (10)
Geometric parameters (Å, º) top
Au1—P12.278 (8)Au2—P22.248 (9)
Au1—C121.98 (3)Au2—C321.97 (3)
Fe1—C12.04 (3)Fe2—C212.07 (3)
Fe1—C22.05 (3)Fe2—C222.02 (3)
Fe1—C32.07 (3)Fe2—C232.03 (3)
Fe1—C42.04 (3)Fe2—C241.99 (3)
Fe1—C52.03 (3)Fe2—C252.03 (3)
Fe1—C61.99 (3)Fe2—C262.09 (3)
Fe1—C72.08 (3)Fe2—C272.05 (4)
Fe1—C82.07 (3)Fe2—C282.03 (3)
Fe1—C92.04 (3)Fe2—C292.05 (3)
Fe1—C102.04 (3)Fe2—C302.00 (3)
P1—C131.83 (3)P2—C331.83 (4)
P1—C151.81 (3)P2—C351.82 (4)
P1—C171.82 (3)P2—C371.86 (3)
C1—C21.41 (5)C21—C221.45 (5)
C1—C51.43 (5)C21—C251.48 (5)
C1—C111.42 (5)C21—C311.43 (5)
C2—C31.47 (5)C22—C231.44 (5)
C3—C41.45 (4)C23—C241.40 (5)
C4—C51.39 (4)C24—C251.36 (5)
C6—C71.32 (5)C26—C271.45 (5)
C6—C101.44 (5)C26—C301.49 (5)
C7—C81.45 (5)C27—C281.47 (5)
C8—C91.47 (5)C28—C291.45 (5)
C9—C101.38 (5)C29—C301.32 (5)
C11—C121.22 (5)C31—C321.19 (5)
C13—C141.58 (4)C33—C341.48 (5)
C15—C161.53 (4)C35—C361.47 (5)
C17—C181.55 (4)C37—C381.53 (5)
C12—Au1—P1170.8 (11)C32—Au2—P2177.1 (9)
C1—Fe1—C240.3 (13)C21—Fe2—C26106.2 (13)
C1—Fe1—C368.7 (13)C22—Fe2—C2141.4 (13)
C1—Fe1—C7118.9 (13)C22—Fe2—C2341.5 (13)
C1—Fe1—C8154.3 (13)C22—Fe2—C2569.6 (13)
C1—Fe1—C9161.7 (13)C22—Fe2—C26118.6 (14)
C2—Fe1—C341.8 (13)C22—Fe2—C27107.4 (14)
C2—Fe1—C7108.5 (13)C22—Fe2—C28126.1 (14)
C2—Fe1—C8121.0 (13)C22—Fe2—C29164.8 (14)
C3—Fe1—C7129.0 (13)C23—Fe2—C2169.9 (13)
C3—Fe1—C8109.6 (13)C23—Fe2—C2568.5 (13)
C4—Fe1—C169.0 (13)C23—Fe2—C26153.9 (14)
C4—Fe1—C270.0 (13)C23—Fe2—C27119.3 (14)
C4—Fe1—C341.2 (12)C23—Fe2—C28106.1 (14)
C4—Fe1—C7166.7 (13)C23—Fe2—C29126.2 (14)
C4—Fe1—C8127.7 (13)C24—Fe2—C2169.1 (14)
C4—Fe1—C9107.2 (13)C24—Fe2—C2268.9 (13)
C5—Fe1—C141.0 (13)C24—Fe2—C2340.9 (13)
C5—Fe1—C268.5 (13)C24—Fe2—C2539.4 (14)
C5—Fe1—C367.9 (13)C24—Fe2—C26163.7 (14)
C5—Fe1—C440.0 (12)C24—Fe2—C27154.2 (15)
C5—Fe1—C7152.7 (14)C24—Fe2—C28118.2 (14)
C5—Fe1—C8164.1 (14)C24—Fe2—C29107.3 (14)
C5—Fe1—C9124.9 (13)C24—Fe2—C30125.1 (14)
C5—Fe1—C10106.0 (13)C25—Fe2—C2142.4 (13)
C6—Fe1—C1107.6 (13)C25—Fe2—C26126.8 (14)
C6—Fe1—C2125.2 (14)C25—Fe2—C27165.3 (15)
C6—Fe1—C3163.7 (13)C25—Fe2—C28151.3 (14)
C6—Fe1—C4153.8 (13)C25—Fe2—C29117.4 (14)
C6—Fe1—C5120.5 (14)C27—Fe2—C21126.0 (14)
C6—Fe1—C737.7 (13)C27—Fe2—C2641.0 (14)
C6—Fe1—C866.4 (13)C28—Fe2—C21164.6 (14)
C6—Fe1—C967.3 (13)C28—Fe2—C2670.5 (14)
C6—Fe1—C1042.0 (14)C28—Fe2—C2742.0 (15)
C8—Fe1—C741.0 (13)C28—Fe2—C2941.6 (14)
C9—Fe1—C2156.9 (13)C29—Fe2—C21152.5 (14)
C9—Fe1—C3121.1 (14)C29—Fe2—C2669.2 (14)
C9—Fe1—C768.7 (13)C29—Fe2—C2769.3 (14)
C9—Fe1—C841.7 (13)C30—Fe2—C21120.4 (14)
C10—Fe1—C1124.8 (14)C30—Fe2—C22156.0 (14)
C10—Fe1—C2162.5 (14)C30—Fe2—C23161.5 (14)
C10—Fe1—C3153.2 (14)C30—Fe2—C25107.8 (14)
C10—Fe1—C4117.1 (13)C30—Fe2—C2642.7 (14)
C10—Fe1—C768.4 (14)C30—Fe2—C2768.8 (14)
C10—Fe1—C868.8 (13)C30—Fe2—C2867.9 (15)
C10—Fe1—C939.6 (13)C30—Fe2—C2938.0 (14)
C13—P1—Au1115.7 (11)C33—P2—Au2112.3 (12)
C15—P1—Au1115.1 (10)C33—P2—C37101.1 (17)
C15—P1—C13106.5 (15)C35—P2—Au2115.7 (12)
C15—P1—C17105.0 (15)C35—P2—C33108.0 (17)
C17—P1—Au1111.0 (11)C35—P2—C37106.2 (16)
C17—P1—C13102.3 (16)C37—P2—Au2112.5 (11)
C2—C1—Fe170.1 (18)C22—C21—Fe267.7 (18)
C2—C1—C5108 (3)C22—C21—C25104 (3)
C2—C1—C11125 (3)C25—C21—Fe267.5 (18)
C5—C1—Fe169.1 (18)C31—C21—Fe2125 (2)
C11—C1—Fe1128 (2)C31—C21—C22127 (3)
C11—C1—C5127 (3)C31—C21—C25128 (3)
C1—C2—Fe169.5 (19)C21—C22—Fe270.9 (19)
C1—C2—C3107 (3)C23—C22—Fe269.5 (18)
C3—C2—Fe169.8 (17)C23—C22—C21109 (3)
C2—C3—Fe168.4 (18)C22—C23—Fe269.0 (18)
C4—C3—Fe168.2 (18)C24—C23—Fe268.2 (19)
C4—C3—C2107 (3)C24—C23—C22106 (3)
C3—C4—Fe170.6 (18)C23—C24—Fe270.9 (19)
C5—C4—Fe169.7 (18)C25—C24—Fe272 (2)
C5—C4—C3107 (3)C25—C24—C23112 (3)
C1—C5—Fe169.9 (18)C21—C25—Fe270.1 (18)
C4—C5—Fe170.3 (17)C24—C25—Fe268.8 (19)
C4—C5—C1110 (3)C24—C25—C21108 (3)
C7—C6—Fe175 (2)C27—C26—Fe268.3 (19)
C7—C6—C10114 (3)C27—C26—C30102 (3)
C10—C6—Fe170.6 (19)C30—C26—Fe265.4 (18)
C6—C7—Fe167 (2)C26—C27—Fe270.7 (19)
C6—C7—C8107 (3)C26—C27—C28109 (3)
C8—C7—Fe169.2 (18)C28—C27—Fe268 (2)
C7—C8—Fe169.8 (18)C27—C28—Fe269.7 (19)
C7—C8—C9106 (3)C29—C28—Fe269.7 (19)
C9—C8—Fe168.1 (17)C29—C28—C27106 (3)
C8—C9—Fe170.2 (18)C28—C29—Fe268.7 (19)
C10—C9—Fe169.9 (19)C30—C29—Fe269 (2)
C10—C9—C8109 (3)C30—C29—C28109 (3)
C6—C10—Fe167.3 (18)C26—C30—Fe271.9 (19)
C9—C10—Fe170 (2)C29—C30—Fe273 (2)
C9—C10—C6105 (3)C29—C30—C26113 (3)
C12—C11—C1176 (4)C32—C31—C21176 (3)
C11—C12—Au1174 (3)C31—C32—Au2173 (3)
C14—C13—P1112 (2)C34—C33—P2115 (3)
C16—C15—P1117 (2)C36—C35—P2114 (3)
C18—C17—P1114 (2)C38—C37—P2110 (3)
(1-200k) top
Crystal data top
C18H24AuFePDx = 1.954 Mg m3
Mr = 524.16Mo Kα radiation, λ = 0.71073 Å
Orthorhombic, PbcaCell parameters from 9928 reflections
a = 14.0011 (19) Åθ = 2.5–28.2°
b = 11.6244 (16) ŵ = 9.12 mm1
c = 21.893 (3) ÅT = 200 K
V = 3563.3 (8) Å3Block, clear reddish brown
Z = 80.21 × 0.17 × 0.12 mm
F(000) = 2016
Data collection top
Bruker APEX-II CCD
diffractometer
5048 independent reflections
Radiation source: rotating anode X-ray tube, Bruker TXS3964 reflections with I > 2σ(I)
Mirror optics monochromatorRint = 0.041
Detector resolution: 7.9 pixels mm-1θmax = 29.8°, θmin = 1.9°
φ and ω scansh = 1918
Absorption correction: multi-scan
SADABS-2012/1 (Bruker,2012) was used for absorption correction. wR2(int) was 0.1149 before and 0.0801 after correction. The Ratio of minimum to maximum transmission is 0.5166. The λ/2 correction factor is 0.0015.
k = 1116
Tmin = 0.285, Tmax = 0.552l = 3030
27588 measured reflections
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.022H-atom parameters constrained
wR(F2) = 0.047 w = 1/[σ2(Fo2) + (0.016P)2 + 1.8511P]
where P = (Fo2 + 2Fc2)/3
S = 1.02(Δ/σ)max = 0.001
5048 reflectionsΔρmax = 0.74 e Å3
193 parametersΔρmin = 0.71 e Å3
0 restraints
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Au10.44772 (2)0.29652 (2)0.34609 (2)0.02543 (4)
Fe10.30636 (3)0.12974 (3)0.48724 (2)0.02303 (9)
P10.49872 (5)0.46111 (6)0.29991 (3)0.02197 (15)
C10.39035 (19)0.0717 (2)0.41695 (12)0.0244 (6)
C20.4462 (2)0.1338 (3)0.46101 (14)0.0288 (6)
H20.49910.10440.48320.035*
C30.4082 (2)0.2472 (3)0.46552 (15)0.0308 (7)
H30.43160.30650.49140.037*
C40.3298 (2)0.2566 (3)0.42502 (14)0.0306 (7)
H40.29170.32320.41890.037*
C50.3183 (2)0.1495 (3)0.39526 (13)0.0274 (6)
H50.27070.13200.36580.033*
C60.2508 (3)0.0097 (3)0.53059 (16)0.0456 (9)
H60.26480.08800.52200.055*
C70.3003 (3)0.0613 (3)0.57240 (15)0.0503 (10)
H70.35350.03980.59680.060*
C80.2551 (3)0.1715 (3)0.57107 (15)0.0445 (9)
H80.27280.23670.59470.053*
C90.1804 (2)0.1664 (3)0.52899 (16)0.0425 (9)
H90.13870.22800.51900.051*
C100.1771 (2)0.0554 (3)0.50383 (17)0.0456 (9)
H100.13300.02900.47400.055*
C110.4033 (2)0.0452 (3)0.39855 (13)0.0277 (6)
C120.4154 (2)0.1433 (3)0.38151 (14)0.0300 (7)
C130.4167 (2)0.5266 (3)0.24534 (13)0.0294 (7)
H13A0.45150.58530.22130.035*
H13B0.39400.46680.21660.035*
C140.3307 (2)0.5830 (3)0.27576 (16)0.0379 (8)
H14A0.28650.61070.24430.057*
H14B0.35220.64780.30080.057*
H14C0.29810.52650.30170.057*
C150.5316 (2)0.5757 (3)0.35231 (13)0.0290 (7)
H15A0.47500.59470.37760.035*
H15B0.58160.54610.38020.035*
C160.5681 (2)0.6865 (3)0.32326 (16)0.0358 (7)
H16A0.52130.71460.29350.054*
H16B0.62890.67150.30250.054*
H16C0.57770.74480.35500.054*
C170.60457 (19)0.4319 (3)0.25423 (13)0.0261 (6)
H17A0.58680.38090.21980.031*
H17B0.62830.50510.23680.031*
C180.6850 (2)0.3753 (3)0.29070 (15)0.0366 (7)
H18A0.73840.35750.26330.055*
H18B0.66140.30410.30940.055*
H18C0.70670.42800.32280.055*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Au10.02969 (6)0.02138 (6)0.02522 (6)0.00376 (5)0.00615 (4)0.00319 (5)
Fe10.0305 (2)0.0175 (2)0.02112 (18)0.00110 (16)0.00578 (16)0.00179 (17)
P10.0239 (4)0.0209 (4)0.0211 (3)0.0034 (3)0.0012 (3)0.0023 (3)
C10.0269 (15)0.0226 (15)0.0238 (14)0.0033 (12)0.0086 (11)0.0006 (12)
C20.0272 (14)0.0256 (16)0.0337 (15)0.0017 (12)0.0005 (13)0.0031 (13)
C30.0357 (16)0.0198 (15)0.0368 (16)0.0057 (13)0.0068 (14)0.0019 (14)
C40.0379 (17)0.0218 (15)0.0322 (15)0.0065 (13)0.0089 (13)0.0073 (13)
C50.0327 (16)0.0293 (16)0.0203 (13)0.0037 (13)0.0038 (11)0.0021 (13)
C60.074 (3)0.0234 (17)0.0397 (19)0.0080 (17)0.0240 (18)0.0022 (16)
C70.063 (2)0.062 (3)0.0256 (17)0.000 (2)0.0075 (16)0.0153 (18)
C80.067 (2)0.040 (2)0.0264 (16)0.0100 (18)0.0183 (17)0.0112 (15)
C90.044 (2)0.0344 (19)0.049 (2)0.0005 (15)0.0258 (17)0.0038 (16)
C100.052 (2)0.039 (2)0.046 (2)0.0185 (17)0.0174 (17)0.0047 (18)
C110.0284 (15)0.0297 (17)0.0249 (14)0.0029 (13)0.0063 (12)0.0021 (13)
C120.0317 (15)0.0300 (17)0.0282 (15)0.0038 (13)0.0039 (12)0.0019 (14)
C130.0267 (15)0.0326 (17)0.0289 (15)0.0063 (13)0.0040 (12)0.0069 (14)
C140.0254 (15)0.0328 (18)0.056 (2)0.0006 (13)0.0064 (15)0.0028 (16)
C150.0390 (17)0.0229 (15)0.0252 (14)0.0031 (13)0.0012 (12)0.0024 (13)
C160.0436 (19)0.0223 (16)0.0413 (18)0.0066 (13)0.0122 (15)0.0013 (14)
C170.0255 (15)0.0260 (15)0.0267 (14)0.0029 (12)0.0044 (11)0.0004 (13)
C180.0325 (16)0.0335 (18)0.0438 (18)0.0016 (14)0.0024 (14)0.0073 (16)
Geometric parameters (Å, º) top
Au1—P12.2788 (7)C1—C21.436 (4)
Au1—C121.994 (3)C1—C51.436 (4)
Fe1—C12.051 (3)C1—C111.429 (4)
Fe1—C22.041 (3)C2—C31.425 (4)
Fe1—C32.031 (3)C3—C41.415 (4)
Fe1—C42.034 (3)C4—C51.415 (4)
Fe1—C52.034 (3)C6—C71.414 (5)
Fe1—C62.033 (3)C6—C101.407 (5)
Fe1—C72.029 (3)C7—C81.429 (5)
Fe1—C82.030 (3)C8—C91.395 (5)
Fe1—C92.031 (3)C9—C101.404 (5)
Fe1—C102.038 (3)C11—C121.212 (4)
P1—C131.824 (3)C13—C141.524 (4)
P1—C151.817 (3)C15—C161.525 (4)
P1—C171.820 (3)C17—C181.529 (4)
C12—Au1—P1173.38 (9)C10—Fe1—C2155.74 (14)
C2—Fe1—C141.09 (11)C13—P1—Au1116.35 (10)
C3—Fe1—C169.07 (12)C15—P1—Au1114.50 (10)
C3—Fe1—C240.98 (12)C15—P1—C13105.48 (15)
C3—Fe1—C440.74 (12)C15—P1—C17106.11 (14)
C3—Fe1—C568.57 (12)C17—P1—Au1110.02 (10)
C3—Fe1—C6156.08 (15)C17—P1—C13103.34 (13)
C3—Fe1—C9125.01 (13)C2—C1—Fe169.07 (16)
C3—Fe1—C10161.87 (14)C2—C1—C5106.8 (2)
C4—Fe1—C169.11 (12)C5—C1—Fe168.78 (15)
C4—Fe1—C268.90 (12)C11—C1—Fe1126.7 (2)
C4—Fe1—C10124.77 (14)C11—C1—C2126.7 (3)
C5—Fe1—C141.17 (11)C11—C1—C5126.5 (3)
C5—Fe1—C268.91 (12)C1—C2—Fe169.83 (15)
C5—Fe1—C440.70 (12)C3—C2—Fe169.14 (16)
C5—Fe1—C10107.29 (14)C3—C2—C1107.9 (3)
C6—Fe1—C1107.90 (13)C2—C3—Fe169.88 (17)
C6—Fe1—C2121.12 (14)C4—C3—Fe169.77 (17)
C6—Fe1—C4162.24 (15)C4—C3—C2108.5 (3)
C6—Fe1—C5125.71 (13)C3—C4—Fe169.49 (17)
C6—Fe1—C1040.44 (14)C5—C4—Fe169.63 (16)
C7—Fe1—C1125.78 (14)C5—C4—C3108.0 (3)
C7—Fe1—C2107.92 (14)C1—C5—Fe170.06 (15)
C7—Fe1—C3120.54 (15)C4—C5—Fe169.68 (17)
C7—Fe1—C4155.00 (15)C4—C5—C1108.7 (3)
C7—Fe1—C5163.29 (15)C7—C6—Fe169.45 (19)
C7—Fe1—C640.75 (14)C10—C6—Fe169.95 (19)
C7—Fe1—C841.23 (14)C10—C6—C7108.3 (3)
C7—Fe1—C968.43 (16)C6—C7—Fe169.80 (19)
C7—Fe1—C1068.46 (15)C6—C7—C8107.1 (3)
C8—Fe1—C1163.73 (14)C8—C7—Fe169.42 (19)
C8—Fe1—C2126.02 (14)C7—C8—Fe169.36 (18)
C8—Fe1—C3107.41 (14)C9—C8—Fe169.98 (18)
C8—Fe1—C4119.29 (14)C9—C8—C7107.9 (3)
C8—Fe1—C5153.82 (14)C8—C9—Fe169.85 (19)
C8—Fe1—C668.49 (14)C8—C9—C10108.8 (3)
C8—Fe1—C940.17 (15)C10—C9—Fe170.07 (18)
C8—Fe1—C1068.06 (15)C6—C10—Fe169.61 (19)
C9—Fe1—C1154.75 (13)C9—C10—Fe169.57 (18)
C9—Fe1—C2162.64 (13)C9—C10—C6107.9 (3)
C9—Fe1—C4106.82 (14)C12—C11—C1178.2 (3)
C9—Fe1—C5119.54 (14)C11—C12—Au1172.6 (3)
C9—Fe1—C667.98 (14)C14—C13—P1113.0 (2)
C9—Fe1—C1040.37 (13)C16—C15—P1116.2 (2)
C10—Fe1—C1120.23 (13)C18—C17—P1113.1 (2)
 

Subscribe to Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow Acta Cryst. B
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds