Buy article online - an online subscription or single-article purchase is required to access this article.
Annealing of the quenched ibuprofen at 258 K yielded a new crystalline form, called phase II. Powder X-ray diffraction patterns of this phase II were recorded with a laboratory diffractometer equipped with an INEL G3000 goniometer and a curved position-sensitive detector CPS120. The starting structural model was found by a Monte-Carlo simulated annealing method. The final structure was obtained through Rietveld refinements with rigid-body constraints for the phenyl group and soft restraints on the other interatomic bond lengths and bond angles. The cell volume is 5% larger than that of the conventional phase I at 258 K. It is also shown that the orientation of the propanoic acid group is drastically changed with respect to phase I, leading to strong modifications of the orientation of the O—H
O hydrogen bonds with respect to the chains of dimers. These structural considerations could explain the metastable character of this phase II.
Supporting information
CCDC reference: 774097
Program(s) used to refine structure: FULLPROF.
Crystal data top
C13H18O2 | V = 1272.03 (18) Å3 |
Mr = 206.28 | Z = 4 |
Monoclinic, P21/c | Dx = 1.077 Mg m−3 |
Hall symbol: -P 2ybc | X-ray radiation, λ = 1.540560 Å |
a = 12.3794 (9) Å | µ = 0.56 mm−1 |
b = 5.8723 (5) Å | T = 258 K |
c = 17.5615 (15) Å | white |
β = 94.873 (4)° | |
Data collection top
Inel CPS120 diffractometer | Data collection mode: transmission |
Radiation source: X-ray tube | Scan method: Stationary detector |
Specimen mounting: 0.7 mm diameter Lindemann capillary | 2θfixed = 0.2-113.8 |
Refinement top
Rp = 0.040 | Profile function: pseudo-Voigt |
Rwp = 0.056 | 59 parameters |
Rexp = 0.126 | 35 restraints |
RBragg = 0.058 | Background function: linear interpolation between selected points |
7579 data points | |
Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top | x | y | z | Uiso*/Ueq | |
C1 | 0.5572 (6) | 0.6766 (19) | 0.4158 (4) | 0.00000* | |
C2 | 0.6059 (6) | 0.8680 (12) | 0.3731 (4) | 0.00000* | |
C3 | 0.6963 (8) | 0.967 (2) | 0.4240 (6) | 0.00000* | |
C4 | 0.6641 (11) | 0.734 (4) | 0.3179 (5) | 0.00000* | |
C5 | 0.7604 (12) | 0.631 (4) | 0.3441 (7) | 0.00000* | |
C6 | 0.8130 (12) | 0.489 (3) | 0.2963 (5) | 0.00000* | |
C7 | 0.7692 (11) | 0.450 (3) | 0.2225 (6) | 0.00000* | |
C8 | 0.6729 (11) | 0.554 (3) | 0.1962 (6) | 0.00000* | |
C9 | 0.6204 (11) | 0.696 (3) | 0.2439 (5) | 0.00000* | |
C10 | 0.8061 (12) | 0.2511 (11) | 0.1767 (6) | 0.00000* | |
C11 | 0.8511 (5) | 0.3890 (10) | 0.1113 (4) | 0.00000* | |
C12 | 0.9146 (10) | 0.1809 (16) | 0.0890 (7) | 0.00000* | |
C13 | 0.9565 (7) | 0.507 (2) | 0.1420 (7) | 0.00000* | |
O1 | 0.6004 (8) | 0.6812 (17) | 0.4845 (4) | 0.00000* | |
O2 | 0.4615 (5) | 0.6338 (17) | 0.4159 (5) | 0.00000* | |
H1 | 0.54252 | 0.59460 | 0.51577 | 0.00000* | |
H2 | 0.54247 | 0.95211 | 0.34572 | 0.00000* | |
H3 | 0.69457 | 0.93109 | 0.47765 | 0.00000* | |
H4 | 0.76245 | 0.93109 | 0.40258 | 0.00000* | |
H5 | 0.68509 | 1.14351 | 0.42214 | 0.00000* | |
H6 | 0.79091 | 0.64412 | 0.39829 | 0.00000* | |
H7 | 0.88185 | 0.41905 | 0.31802 | 0.00000* | |
H8 | 0.64266 | 0.52523 | 0.14303 | 0.00000* | |
H9 | 0.55273 | 0.76436 | 0.22148 | 0.00000* | |
H10 | 0.75186 | 0.17634 | 0.14443 | 0.00000* | |
H11 | 0.85372 | 0.14644 | 0.21091 | 0.00000* | |
H12 | 0.79116 | 0.42036 | 0.07230 | 0.00000* | |
H13 | 0.97950 | 0.16131 | 0.12476 | 0.00000* | |
H14 | 0.94623 | 0.20722 | 0.04049 | 0.00000* | |
H15 | 0.86032 | 0.06455 | 0.06744 | 0.00000* | |
H16 | 0.99160 | 0.58868 | 0.10212 | 0.00000* | |
H17 | 0.98938 | 0.39791 | 0.18671 | 0.00000* | |
H18 | 0.95001 | 0.64061 | 0.18671 | 0.00000* | |
Subscribe to Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials
The full text of this article is available to subscribers to the journal.
If you have already registered and are using a computer listed in your registration details, please email
support@iucr.org for assistance.