view article
Figure 3
Resolution improvement by dispersion compensation. The measured peak widths (open circles) are plotted as obtained from a calibration Fe powder sample using dispersion compensation as shown in Fig. 2[link]. The solid line indicates the resolution as calculated from the experimental parameters. Contributions to the total resolution arise from the sample thickness (long dashes), detectors slit opening (short dashes) and dispersion contribution (dashed-dotted). The minimum around the [220] reflection results from the dispersion compensation.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 5| Part 3| May 1998| Pages 226-231
https://doi.org/10.1107/S0909049598001393
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS