view article
Figure 4
Sketch of the microdiffraction set-up on ID15. The vertical microfocusing was achieved by a bent Laue crystal. A Debye–Scherrer cone is shown. The varying width is due to the dispersion of the Laue monochromator. The beams indicated by long (short) dashes relate to low (high) energies. The parameters of the set-up are compiled in Table 2[link]. Scintillation counters were employed and the scattering angle was measured by slit scans. The lateral and axial residual strain profiles were measured simultaneously using two detector/slit units.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 5| Part 3| May 1998| Pages 226-231
https://doi.org/10.1107/S0909049598001393
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS